Annual Plan IJK BP Parappukara GP Karkkattukadavu L I Maintenance electrical S0342 25 General Electrical Work

Amount

Electrical work

OD358389/2024-2025:Supplying and providing red/green/orange colour LED indicator lamp AC/DC 22.5mm diain the existing panel and giving connection etc. as required.

OD358387/2024-2025:Supplying and providing blue colour LED indicator lamp AC/DC 22.5mm diain the existing panel and giving connection etc. as required.

OD358391/2024-2025:Supplying and fixing 2 amps rating, 240/415 volts, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole

OD361318/2024-2025:Supply and providing three phase multifunction meter to read VAF of 3 phase class1

OD361320/2024-2025:Supply and providing 10/5A,5VA accuracy class 1tape wound metering CT

OD358390/2024-2025:Dismantling the 60 HP motor into stator and rotor ,cleaning the windings,attending minor repairs retaping the coils if necessary,varnishing the coil with best quality of varnish,cleaning and greasing the bearings with lithium base grease,heating and baking the windings reassembling,test running including scrapping cleaning and painting with 2 coats of grey enemel paint

OD361337/2024-2025:Dismantling the starter of 60 HP motor parts by parts draing the oil,filtering the oil, cleaning the terminal cotacts,cutting levelling and polishing the contacts whereever necessary checking the tripping meachanisam replacing the damaged wires attanding petty repairs and refitting ,resetting and making the starter in good working condition etc. as required.

OD361350/2024-2025:Replacing the damaged non volt coil of the oil immersed starter and giving connection; etc as required.

OD358386/2024-2025:Dismantling the 2/3 HP motor into stator and rotor, cleaning the winding, attending minor repairs, retaping the coils if necessary, cleaning and greasing the bearings with Lithium base grease, heating and baking the winding, varnishing the coils with best quality insulation varnish, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

OD358388/2024-2025:Dismantling the split case pump of the above motor ,cleaning and greasing the bearings with lithuum grease,changing the cottan tape , levelling the shaft ,checking tattending petty repairs,refitting, setting and making in good working condition including painting if necessary etc as required.

OD358383/2024-2025:Dismantling the200 mm flanged type non return valve removing the forghin materials inside the valve cleaning and making the same in good working condition including painting etc as required.

OD358412/2024-2025:Dismantling the 200 mm flanged type wheel valve removing the forghin materials inside the valve cleaning and making the same in good working condition including painting etc as required.

OD358381/2024-2025:Scrapping,cleaning and painting the the existing 200/300 mm MS pipe complete with acessaries like flanges,bend etc with 2 coat of synthetic enamel grey paint and making the same in good condition

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.30:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

OD358380/2024-2025:Supply and providing 25X3 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

OD358385/2024-2025:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

OD358392/2024-2025:Dismantling the existing main board and refiting the same after overhauling/cleaning ,painting with 2 coats of synthetic enamel paint using copper socket ,crimping /soldering etc and making the same in good working condition ,including reglanding using alu; socket ,copp;er earth gland etc as required.

SHARJAS A (BID ID -2116115)

Bidder Name

SHARJAS A

BINSON JOSEPH