Providing Staircase & Office room (in 2nd floor) for newly renovated food analasys lab at Tirumala.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labor charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including Ordinary soil-Manual means up to 3m depth.

Earthwork excavation in Hard rock (blasting prohibited) or structures as per drawing and technical specifications Clause 305.1 including setting out and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling of foundations and basement with best river sand in layers of not more than 15 cm thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labor charges, hire charges of T&P etc., complete for finished item of work.

Conveyance of excavated surplus earth/debris to a distance 2 km from the site of work to the place specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.

Cement Concrete (1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum)nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) using 20 mm ( 0.54 Cum) and 12 mm (0.36 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing cost and conveyance of all materials etc., complete. for 2nd floor

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

For Columns/Pedastals: Upto Basement

For Lintels in Second Floor

RCC M 20 Design mix using 20 mm HBG crushed metal 0.530 cum (707 kgs),. 10 mm HBG crushed metal, 0.362 cum (471 kgs) , sand 0.407 cum (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 liters/ cum of CC)etc. horizontal plain sunshades or lofts projecting from the face of the wall 65 mm average thickness, 80 mm thick at the face of the wall and 50 mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from any source confirming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales and other taxes on all materials including all operational, incidental and labor charges such as machine mixing, laying concrete, curing , etc., complete but excluding cost of steel and its fabrication charges and including cost of hire charges for centering and scaffolding using steel scaffolding pipes, jack pipes, Jack props,wallers,Foot plates,brackets steel centering plates etc., for finished item of work.---do-0.6m Width Horizontal Sunshade in Second Floor

Providing high yield strength Deformed bars (HYSD) Thermo Mechanically Treated (TMT) bars (Fe-500 grade as per IS 1786-1979) of different dia meters 36 mm dia and below for RCC works, including labor charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labor charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126).

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete. for 2nd floor

In Second Floor

Construction of 110 mm thick brick partition walls in CM (1:4) using well burnt Bricks 2nd class or ground moulded ( Non- modular or traditional size) bricks ( 230 x 110 x 70 mm) including curing, cost and conveyance of all materials etc., complete. for 2nd floor

Plastering in Cement mortar (1:3) 12 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete. for First Floor

Plastering in Cement mortar (1:5) 12 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete. for 2nd floor

Plastering in Cement mortar (1:5) 20 mm thick using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete. for 2nd floor

In Second Floor

roviding impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth finish, curing, rounding off junctions of wall and slab etc., complete for finished item. for 2nd floor

Flooring with Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, of all series (as per manufacture specification) set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per Sqm. jointed with white cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply). for 2nd floor

Finishing the sides of walls with Ist quality glazed wall tiles of red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any color and finish in all shades and designs of approved color and brands including pointing the joints with the same color of cement by mixing the same color pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). for 2nd floor

Supply and fixing of 10 mm wide PVC edge beading including cost and conveyance of all materials and incidental charges etc.,complete.

Flooring with Double charged /multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600x600 mm and thickness between 8-10 mm 1st quality confirming to IS 13712, IS13630 ( parts 1 to 15) of any color and finishing all shades and designs. Set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, etc., complete - for finished item of work. for 2nd floor

Providing skirting lo internal walls to the following heights / risers of steps with Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs length equal to flooring stones, set over base coat of CM (.1:3) 12 mm thick with cernent slurry of honey like consistency spread at the rate of 3.30 kgs per sq.m and jointed with white cement paste mixed wilh pigment of matching shade to full depth, including cost and conveyance of all materials, etc.. complete - for finished item of work. for 2nd floor

Flooring with cement concrete Chequered cement concrete heavy duty floor tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades., set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and color including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supplying and fixing in position Flush door shutters, solid bond wood block board type with Teak ply on both faces: 35 mm thick conforming to IS:2202 of standard make hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Teak wood frames of size 75mm x 100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures). 1002,2202, Part-I 1991

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

--do-- Door Frame section of 63.5x100 MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Minimum of 4 hinges will be required for fixing the door with the frame.

Supplying of the following Aluminum anodized hardware fittings of approved make to the door and windows including cost of screws , nails etc., including cost and conveyance etc., complete as directed during execution.

Anodized aluminum aldrop of Size 16 mm dia x 300 mm long with I S I mark IS 2681

Anodized Aluminium aldrop of Size 16 mm dia x 250 mm long (3T-Pieces) with ISI mark IS 2681 - '79.

Anodised Aluminium tower bolts 12 mm dia x 250mm long with lsl Mark lS 204(prll) 1978

Anodized aluminum door handle with 10mm rod 150 mm grip long 3mm plate with I S I mark IS 208 -1979

Anodized Aluminium Butt hinges - 150mm long with ISI mark IS 205

Heavy Duty Alluminium Door stopper

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 Sqm)

Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.

Providing and applying wall putty of white cement or polymer or cement based putty or equivalent putty such as Birla wall care putty of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying putty / texture paint filler by putty knife / muslin pad, air dry for 2-3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labor charges etc., complete for finished item of work for external walls - excluding cost of access scaffolding.

Painting two coats for Internal walls over a coat of cement primer (Total three coats) with acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade over a coat of cement primer interior grade-1 (total three coats) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labor charges etc., complete for finished item of work as per SS 911 for internal walls

Supply, fixing and Painting of Ms Plates of various sizes including cost and conveyance etrc complete as directed during the execution of the work. Including Labour charges for fabricating all heavy steel works like Trusses, stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc., excluding cost of fixing in position. including painting the grills with two coats over a primary coat (total three coats) with synthetic enamel paint of approved make and colour etc., complete.

Supply, fixing and Painting of Ms tubes & Pipes of all diameters as per IS-1161 including cost and conveyance etc complete as directed during the execution of the work. Including Labor charges for fabricating all heavy steel works like Trusses,Stanchions,Heavy Beams and Girders including cost of welding rods, power charges excluding cost of fixing in position. including painting the grills with two coats over a primary coat (total three coats) with synthetic enamel paint of approved make and color etc., complete.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hidustan /Neycer /parry ware make white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supply & fixing of PVC low level cistern parry ware, slim line with internal components & short bend: 10 Liters capacity Single Flush

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaguar Continental series, Chrome Finish with 7 years warranty.

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock nt

Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W / Parry ware / Earthenware) ISI Mark or equivalent approved by the department.

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make

4" (101.6 mm ) Nahany Trap ( without inlet with out Jali)UPVC/SWR Pipe fittings

3" (76.2 mm ) Nahany Trap ( without Jali without inlet) UPVC/SWR Pipe fittings

Round Jali - UPVC/SWR Pipe fittings

S & F angle stop cock 12.7 mm dia first quality Indian Make 400 grams Seiko/ Senior/ Nice or equivalent.

Supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make.

S & F NP soap dish heavy type with NP SCREWS

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia

Supply and Fixing of Ashirvad / Ajay / Astral Flowgurard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

54.00 mm OD pipe SDR - 13.5

34.90 mm OD pipe SDR - 13.50

28.60 mm OD pipe SDR - 13.5

22.20 mm OD pipe SDR - 13.5

Supplying and fixing in position 600 x 450 mm size wall mirror 5 mm thick glass (Saint Gobion) with 6 mm plywood IS 303 bwr (both sides commercial) back in position with 12 mm Aluminum 'U' channel (Jindal make) including cost and conveyance of all materials etc., complete.

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class-I, Indian make heavy type - 50 mm nominal bore size.

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size

Supply & fixing NP coat hook

Providing Unplasticized PVC SWR Rain water downfall pipes for the following dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution. 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - Brick Work

Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc, complete and stacking them within 100 metres lead

Dismantling, clearing away and carefully stacking materials useful for - Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers