PAINTING AND MARKING OF DISPERSALS AND TAXI TRACK AT AF STN KUMBHIRGRAM

Amount

Materials and labour for preparation of damaged/ broken concrete pavement slab surface and applying "SURE BOND" self adhesive cold applied polymer modified High Tack Bituminous Instant Runway / Tarmac crack sealing Tape of 50mm width, 2KPa thick having quick release film on one side Runway/Pavement/Tarmac crack to form high strength water proof layer complete all as specified as per manufacturer instructions and directed. Make: Srijan Systems Pvt Ltd.

Material and labour for making good of cracks, joints, pot hole stuffer in slabs (exposed rigid pavement) by 'CONCRE-FLO' or it's equivalent, Streaming Concrete Crack Stuffer complete all as specified and directed. Make: Srijan Systems Pvt Ltd or it's equivalent.

Material and labour for making good of cracks, joints, pot hole stuffer in slabs (exposed rigid pavement) by 'ASPHA-FLO' or it's equivalent, Streaming Concrete Crack Stuffer complete all as specified and directed. Make: Srijan Systems Pvt Ltd or it's equivalent.

Preparation of old painted bituminious or Concrete surfaces of taxi track, dispersal etc exc.10 cm width and painting lines, curves, dashes , arrows, letters etc and apply with one coat of runway marking paint white or golden yellow complete all as specified and as directed.

All as per item No 04 above but n. exc. 10 cm width complete all as specified and as directed.

Preparation of old painted bituminous ( or) concrete surfaces of taxi track, dispersal etc. exc. 10 cm width and painting lines, curves, dashes , arrows, letters etcand apply with one coat of runway marking paint orange complete all as specified and as directed.

All as per item No 06 above but n. exc. 10 cm width complete all as specified and as directed.

Preparation of untreated bituminous (or) concrete surfaces of taxi track, dispersal etc. exceeding 10 cm width and painting lines, curves, dashes, arrows, letters etc.and apply with two coats of runway marking paint white or golden yellow complete all as specified and as directed.

Preparation of untreated bituminous (or) concrete surfaces of taxi track, dispersal etc. exceeding 10 cm width and painting lines, curves, dashes, arrows, letters etc and apply. with two coats of runway marking paint orange complete all as specified and as directed.

Complete removal/Omitting the existing marking as in taxi track/dispersal by brushing/scrubbing with wire brush ,paint remover(or) burning off by blow lamps and cleaning with scraps any number of coats, any width(or)girth as required complete all as specified and as directed.

Materials and labour for writing letters or figures (Block,Roman,Italic or Indian) with synthetic enamel paint (First quality) n exc 30cm high complete all as specified and as directed.

Materials and labour for writing stop,commas, short line, dashes, hyphens, brackets etc with synthetic enamel paint (First quality) complete all as specified and as directed.

Material and labour for making good cracks/broken edges in slabs (exposed rigid pavement) by cutting "V" grooves/making shapes as directed by AGE(I) not exc 40mm wide at top and not exc 40mm deep and cutting spelled joints sides perpendicular and parallel to edge by mechanical tools, cleaning by compressed air and washing with chemical water solution under pressure and then applying epoxy mortar with hardener, quartz, sand (1:0.5:8 by weight after priming the cleaned surfaces with approved proprietary primer of the same manufacturer complete all as specified and as directed. Make: M/S HINDUSTAN CIBA GEIGY Ltd or it's equivalent as approved by AGE(I).

Preparation of old painted plastered/concrete surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified and as directed.

M&L for applying a thin layer of cold emulsion bitumen (cationic type) over existing runway/ taxi track and connecting road approaching to main runway (flexible portion) @ 5kg of emulsion per 10 SQM in diluted state as per manufacturers instruction by using mechanical sprayer including preparation of surfaces complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc. 15cm thickness (below or above GL) complete all as specified and as directed.

Materials and labour for plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in hard standing finished even and fair without using extra cement complete all as specified and as directed.

M/S SMRITI ENTERPRISE

Niranjan Roy

M/S P K ROY AND SONS

Goswami Traders

M/S ANITA ROY and SONS

Shri Jyotibrata Chakrobarty

Bhuiya Construction