LAC-ADS-Supply and Installation of various electronic works in newly constructed building, PRD, Alappuzha-Various Electronic Works-General Electronics Work

Amount

PA SYSTEM AND PROJECTOR

OD41079/2023-2024:Supply, Installation, testing and commissioning of gooseneck microphone with polar pattern: Cardioid / hyper cardioid / super cardioid, Gooseneck length: 15 inch or better, S/N Ratio: 65 dB or better, Max SPL: 107 dB or better, Frequency Response: 50 Hz to 17kHz or better, LED Indication , with base having microphone button with a two-color status display, PTT, PTM, and ON. Approved Make: Sennheiser, Shure, Audio Technica

OD41078/2023-2024:Supply, Installation, Testing and Commissioning of wireless UHF microphone with base unit, wideband FM Modulation ,Sensitivity less than 3 Micro Volt at 52 dB(A),8 frequency banks, each with up to 12 factory-preset channels, Input sensitivity1.5 mV / Pa, Frequency response 50 to16,000 Hz (-3 dB), AF frequency response 80-14,000 Hz, Switching bandwidth up to 24 MHz,0 to -30 dB, adjustable in 10 dB steps, 40 dB, adjustable in 5-dB steps, RF output power 10mW Approved Make: Sennheiser , Shure, Audio Technica

OD41077/2023-2024:Supply, Installation, Testing and commissioning of 16-Channel Mixing Console: Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo) / 4 GROUP Buses + 1 Stereo Bus / 4 AUX (incl. FX), +48V phantom power Approved Make: Yamaha/ Behringer/ Soundcraft

OD41076/2023-2024:Supply, Installation, Testing and Commissoning of two way wall mount speaker with 5 inch LF and 1 inch HF, bass reflex port, dedicated wall bracket, ABS moulded enclosure, Power handling 60 W, impedance 8 Ohm, Freq. Res.80Hz - 20kHz, (+/- 6dB) , Max. SPL 105dB ( Direct), sensitivity 88 dB (half space),7.5W, 15W, 30W power taps at 100V, IP65 Approved Make: Sonodyne /AM/ QSC/ Tannoy

OD41075/2023-2024:Supply, Installation, Testing and Commissoning of 2 x 120W amplifier 4 ohm and 100 volt output options, Frequency Response 90Hz -30kHz, THD+N less than 0.01% (-3dB), S/N Ratio greater than 90dB, input Sensitivity 150mV RMS Approved Make: Sonodyne / Yamaha/ Tannoy/AM

OD41074/2023-2024:Supply, Installation, Testing and Commissioning of rack mountable distribution splitter that splits two inputs into eight outputs, each input and output has a balanced XLR connector, 8 output channels each featuring independent level controls, 5 segment LED meters for each output to indicate signal activity, Frequency Response 10Hz -75kHz, Signal to Noise Ratio greater than 97dB, dynamic range:117 db, etc. Approved Make: Australian Monitor/ Behringer/Kramer

OD41073/2023-2024:Supply, Installation, Testing and Commissioning of projector having XGA- 3500 Lumens, 4:3 Aspect Ratio ,up to 30,000 hours of 24/7 operation, maintenance-free full 360-degree placement, 1.3x optical zoom, Light Source Quantum Laser, Horizontal Sync. Range (KHz) 15 - 100, Vertical Sync. Range (Hz) 50 - 120, Magnification 0.8x - 2.0x, Fan Noise (dB) 28 - 30, WEEE, RoHS certified Preferred Make : Infocus/ Panasonic/ Sony

OD41072/2023-2024:Supply, Installation, Testing and Commissioning of 100 inch diagonal,4:3,Matt White with tubular motorised screen with remote Control. Approved Make : Logic/Liberty

OD41070/2023-2024:Supply, Installation, Testing and Commissioning of Analog and Digital Audio Extractor with HDMI pass-through. Approved Make : Atlona/Kramer/Wyrestorm

OD41069/2023-2024:Supply , fixing and laying of Eight core audio snake cable with specials conforming to ISI standard on surface using existing conduits Approved Make : Belden/ Klotz/ Canare/Krystal

OD41068/2023-2024:Supply and laying of 2 core PVC insulated Cu conduction sheilded microphone cable. Approved Make : Belden/ Klotz/ Canare

OD41067/2023-2024:Supply and laying of 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cable. Approved Make : Belden/ Klotz/ Canare

OD41066/2023-2024:Supply, Installation and Fixing of XLR Jack connectors (XLR M/F and chasis mount as per site requirements) Approved Make: Neutrik/Canare

OD41065/2023-2024:Supply and installation of 3 meter RCA Cable as per site requirements Approved Make:Kramer/ Klotz / Wyrestorm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

OD41064/2023-2024:Supply and fixing 50mmX50mm PVC cable management System with base and lid along with the following accessories confirming to IEC 610 84/BS 476 and 4678 on surface/recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90degree Flat Angle 90degree/TEE, internal Angle 90degree, Internal coupler, Flat cross, End cap, Flanged coupler, Joint cover, cable retainer, Wall plate for internal Angle etc. Approved Make: Precision /OBO

OD41063/2023-2024:Supply and installation of 15 Mtr UHD 4:2:0 60Hz HDMI Cable with CL3 Rating. Approved Make:Kramer/ Extron/ Wyrestorm

OD41062/2023-2024:Supply installation testing Commissioning of face plate with HDMI. Approved Make:Kramer/ Crestron/Extron

OD41060/2023-2024:Supply installation testing and Commissioning of 2Mtr HDMI to HDMI Cable. Approved Make: Kramer/ Extron/ Wyrestorm

OD41059/2023-2024:Supply, Installation, testing and commissioning of 17U Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door, heat dissipation fans, movement wheels, power distribution units etc. Approved Make: Netrack/President/Valrack

OD41093/2023-2024:Supply of all necessary Electrical accessories for the distribution of power as required

OD41527/2023-2024:Supply , installation Testing, and Commissioning of 24 port (10/100/1000 Mbps ) Gigabit Ethernet PoE + switch with 2 SFP uplink ports (minimum), power budget 190 watts with 3 years Onsite warranty Approved make: Cisco / HP/ Netgear

OD41526/2023-2024:Supply and fixing CAT-6 24 Port Enhanced Modular type Patch Panel for interconnecting servers and clients, with necessary numbering with permanent marker or by printed means, including termination charges. Approved Make: Molex/Amp/Legrand

OD41525/2023-2024:Supply and fixing CAT-6 Information Outlet with spring shutter front access for inter connection of nodes and switches, including termination charges including testing of new node points and making permanent labeling on the I/O box . Approved Make: Molex/Amp/Legrand

OD41524/2023-2024:Supply and fixing Dual type CAT-6,RJ 45 Information Outlet with spring shutter front access for inter connection of nodes and switches, including termination charges including testing of new node points and making permanent labeling on the I/O box and on the patch panel. Approved Make: Molex/Amp/Legrand

OD41529/2023-2024:Supply, installation, testing, and commissioning of UL Listed, ETL verified 1meter CAT 6 UTP Patch Cord having LSZH jacket, 24 AWG bare copper conductor UTP 4 pair both end factory Crimped with modular male plugs with minimum 500 insertion cycles terminated as per TIA/EIA 568-B colour code conforming to the standards ANSI/TIA-568.2 , ISO/IEC 11801, IEEE 802.3, ISO/IEC 60332-1,and RoHS Complaint. Approved make: Molex, Commscope, Legrand Honeywell, Norden

OD41528/2023-2024:Supply, installation, testing, and commissioning of UL Listed, ETL verified 2 meter CAT 6 UTP Patch Cord having LSZH jacket, 24 AWG bare copper conductor UTP 4 pair both end factory Crimped with modular male plugs with minimum 500 insertion cycles terminated as per TIA/EIA 568-B colour code conforming to the standards ANSI/TIA-568.2 , ISO/IEC 11801, IEEE 802.3, ISO/IEC 60332-1,and RoHS Complaint. Preferred make:Molex, Commscope, Honeywell,Norden

OD303040/2024-2025:Supply, drawing. testing and commissioning of UL certified and ETL verified 23 AWG bare copper conductor UTP 4 pair Unarmoured CAT 6 cable with HDPE Insulation Material and LSZH Outer Jacket, conforming to the standards ANSI/TIA-568.2-D, ISO/IEC 11801, IEEE 802.3, ISO/IEC 60332-1,ISO/IEC 61034-2,ISO/IEC 61754-2,Colour Code as per TIA/EIA 568-B, RoHS Compliant, transmission performance tested upto 500 MHz or better and Insertion Loss/ Attenuation: 33 dB/100m or better at 250 MHz in the existing conduit as required

OD41543/2023-2024:Supply and Fixing 19 inch 6U Wall Mount Rack having 600mm depth for switches with cable manager and hardware mounting kit. Approved Make: D Link/Valrack/Netrack

OD41546/2023-2024:Supply and Fixing 19 inch 9U Wall Mount Rack having 600mm depth for switches with cable manager and hardware mounting kit. Approved Make: D Link/Valrack/Netrack

OD41575/2023-2024:Supply,Installation, testing and commissioning of WiFi 6 AX1800 PoE Ceiling/wall mount Wireless Access Point, 802.11ax high performance, dual band concurrent WiFi 6 operations at 2.4GHz and 5GHz with a combined throughput of 1.8Gbps, Backward compatible to allow legacy Devices to connect at their fastest speed, Supports wireless security features WPA, WPA2 and WPA3. Warranty-3 years Preferred Make: Cisco/ HP /Netgear

OD41574/2023-2024:Supply,Installation,Testing and Commissioning of Enterprise class Access Switch with minimum 24 x 100/1GBase-T ports and 4 x 1/10G SFP+ ports Switch should support on Switching throughput -128Gbps, Forwarding Capacity - 95Mbps, 4K MAC Address, 1K VLANs, IPv4 and IPv6 static routing and hardware replacement warranty and ongoing software upgrades for all major and minor releases for a period of 3 years. Technical Specification attached. Approved Make : Cisco, HP , Juniper

OD41573/2023-2024:Supply, Store , Installation, Testing and Commissioning of Cat-6A U/UTP patch panels initially loaded with 12 ports, shall ganged adapter style patch panel will utilize increments of six RJ-45 style jacks in a common molded component 24 port per 1Rack unit, Straight and angled option shall be available as per the site requirement. patch panel type shall be compliant with IEC 60603-7-4, panel must be capable of supporting an upgrade to an intelligent system without any interruption to service due to patch cord removal or terminal block re-termination, panel should support the strain relief bar in the back of the panel. Bar should have the cable holders with Velcro to hold the cables in place. Approved Make: Panduit/Commscope/Nexans/Molex

OD41572/2023-2024:Supply,Installation, Testing and Commissioning of Cat.6A, U/UTP, AWG23, LSZH cable as per ISO/IEC 60332-3-22 Vertical Flame spread test. 100 Ohm impedance. Data transmission frequencies of up to 550 MHz. The cable and cordage shall be UTP components that do not include internal or external shields, screened components or drain wires. Should comply with the following standards: ANSI/TIA 568C.2,ISO/IEC 60754-2Acidity, ISO/IEC 61034-2 Smoke Density Cable should have Third party ETL verified test certificate for long distance and short distance. Approved Make: Panduit/Commscope/Nexan/Molex

OD41571/2023-2024:Supply, Installation, Testing and Commissioning of CAT 6A LSZH U/UTP RJ45 1mtr Patch Cords shall be equipped with 8-pin modular plugs on each end. The cordage sheath shall be made of Low-Smoke, Zero Halogen (LSZH) as per ISO/IEC 60332-3-22: Vertical Flame Spread test. The patch cords will have insertion life of 750 cycles minimum. The cordage shall be UTP components that do not include internal or external shields, screened components or drain wires. Should have Third party ETL verified test certificate for long distance and short distance. Length and color shall be available based on the site requirement. Approved Make: Panduit/Commscope/Nexans/Molex

OD41570/2023-2024:Supply, Installation, Testing and Commissioning of CAT 6A LSZH U/UTP RJ45 3 mtr Patch Cords shall be equipped with 8-pin modular plugs on each end. The cordage sheath shall be made of Low-Smoke, Zero Halogen (LSZH) as per ISO/IEC 60332-3-22: Vertical Flame Spread test. The patch cords will have an insertion life of 750 cycles minimum. The cordage shall be UTP components that do not include internal or external shields, screened components or drain wires. Should have Third party ETL verified test certificate for long distance and short distance. Length and color shall be available based on the site requirement. Approved Make: Panduit/Commscope/Nexans/Molex

OD41569/2023-2024:Supply, Installation, Testing and Commissioning of Category 6A UTP outlets shall meet or exceed Category 6 transmission requirements for connecting hardware, as specified in TIA/EIA 568-B.C.2 Commercial Building Telecommunications Cabling Standard and ISO/IEC 11801:2002 Second Edition. The 8-pin modular (RJ-45) jacks shall comply with IEC 60603-7-4. The information outlet shall have a Current Rating of 1.5 A at 20 degree Celsius to support the PoE and PoE+ applications, The information outlet will have insertion life of 750 cycles minimum. Outlet shall be available in different color as per site condition. Singe port shuttered face plate shall be included. Approved Make: Panduit/Commscope/Nexans/Molex

OD41568/2023-2024:Supply,Installation, Testing and Commissioning of Category 6A UTP DUAL outlets shall meet or exceed Category 6 transmission requirements for connecting hardware, as specified in TIA/EIA 568-B.C.2 Commercial Building Telecommunications Cabling Standard and ISO/IEC 11801:2002 Second Edition. The 8-pin modular (RJ-45) jacks shall comply with IEC 60603-7-4. The information outlet shall have a Current Rating of 1.5 A at 20 degree Celsius to support the PoE and PoE+ applications, The information outlet will have insertion life of 750 cycles minimum. Outlet shall be available in different color as per site condition. Dual port shuttered face plate shall be included. Approved Make: Panduit/Commscope/Nexans/Molex

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

OD41584/2023-2024:Supply and fixing 50mmX50mm PVC cable management System with base and lid along with the following accessories confirming to IEC 610 84/BS 476 and4678 on surface/recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90degree Flat Angle 90degree/TEE,internal Angle 90degree, Internal coupler, Flat cross,End cap, Flanged coupler, Joint cover, cable retainer, Wall plate for internal Angle etc. Approved Make:Precision /OBO

OD41587/2023-2024:Supply installation Laying testing and splicing of 6 core Single mode outdoor purpose OFC through PVC conduit with enough patch code in patch boxes with all other necessary accessories to complete the work. Approved Make : Molex, Finolex

OD41586/2023-2024:Supply,Installation,Testing and Commissioning of duplex Optical Transceiver, eSFP,GE, Single-mode Module suitable for the above switch with necessary LC/UPC pigtails/patch chords of Molex make,splice box and including splicing and termination as required. Approved Make : Netgear/Syrotech/Cisco

OD41597/2023-2024:Supply and installation of 1KVA UPS, Output Power Capacity 800 Watts / 1000 VA, Output Frequency (sync to mains) 50/60Hz +/- 3 Hz with built in battery. Approved Make : Numeric /Hykon/APC

OD41608/2023-2024:Supply of all necessary Electrical accessories for the distribution of power as required

F1 Solutions (BID ID -2192133)

Bidder Name

ATLANTA COMPUTERS

F1 Solutions