ZPGF 15% SC

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring ,strutting,sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for fondation of building

Filling with stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of all materials

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Column Footings

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Plinth Beam

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Columns

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Roof Beams

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Slab 125mm thick F.F

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Lintel Over Door & Windows

VRCC M- 20 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 330 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For Sunshade Back Side

Brick Masonry Basement with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. for Basement

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504). for Superstructure for Ground floor

Plastering with 2 coats 12 mm thick base coat in CM(1:5) 8mm thick and top coat in CM(1:3) 4mm thick incuding Cost and Conveyance of all materials and labour charges etc., complete

Ornamental Plastering with CM (1:3), 12 mm thick including Cost and Conveyance of all materials and labour charges etc., complete

Providing impervious coat Over exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental

Flooring with vitrified tiles of Ist quality set over bse coat of CM(1:8) 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with white cement paste to full depth mixed with mixed with full depth of pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with soluble salt porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water for finished item of work.

Supplying & fixing of Iron Doors and Windows Grills including labour charges for fabricating steel including cost of welding rods, power charges & fixing the grill in position etc complete

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

Supply and fixing of Sal wood Door frame with ply wood shutter of size 1.20 x 2.10 mt with frame made of well seasoned Sal Wood scantlings of size 100 x 75mm and Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick including fixers of 6 nos of 9" ' z" holdfasts, 200 mm long MS aldrop-1 no, 150mm MS bolt - 2No, 125 long MS butt hinges 6 No's, MS fancy handles 125 mm -2nos with necessary screws complete.