2026-27/62/05

Name of work:-Reparing & Renovation of Gujarat Ayurved Vikas Mandal , Odhav

Sr No Qty. Item Rate Rate in Words Unit Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall/R.C.C Rupees Nineteen

1 1509.60 member including stacking of serviceable material and disposal of unserviceable from 19.57 Paise Fifty Seven Cmt

site of work with all lead and lift Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

2 145.60 47.72 Seven Paise Smt

materilas and disposal of unserviceable materials with all lead nd lift.

Seventy Two Only

Brickwork using common burnt clay building bricks having crushing strength not less

than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar1:5.(1-Cement:5-fine

3 9.66 4326.69 hundred Twenty Cmt

sand)(A) Conventionl (upto 10 ton) Extra for brick work in super structure above plinth

Six Paise Sixty

level upto floor two level (A) Conventionl

Providing 15mm thick cement plaster in single coat on Rough(Similar) side of single or

hundred Seventy

4 1588.35 half brick walls for interior plastering upto floor two level and finished even and smooth 176.58 Smt

Six Paise Fifty

in (i)Cement mortar1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height 10metres above ground Rupees Three

5 1198.80 level consisting of 12mm thick backing coat of C.M.1:3(1-cement:3-sand)and 8mm 300.66 hundred Paise Smt

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Sixty Six Only

Distempeing (Two coats) with oil bound washable distemper of approved brand and

manufacture and of required shade on wall surface s to give an even shade,over and Rupees Seventy

6 1588.35 including a priming coat with alkaliresistance primer of approved brand after thoroughly 76.84 Six Paise Eighty Smt

brushing the surface and other foreign matter and aso including preparing the surface Four Only

even and sand parpered smooth

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

hundred Fourteen

7 1198.80 give an required shape even shade after thoroughly brushing the surface to remove all 114.53 Smt

Paise Fifty Three

dirt,and remains of loose powdered materials.etc complete

ApplyingtwocoatsofBirla(whitecementbased)orAsian(acryliclapyputty)orequivalent&twoc

oatsofprimerofapprovedbrandandmanufactureonnewwallsurfacetogiveanevenshadeincl

8 1588.35 40.59 Paise Fifty Nine Smt

udingthoroughlybrushingthesurfacefreefrommortrdroppingandotherforeignmatterand

sand papered smooth.

Painting two coats (excluding priming coat) on new steel and other metal surface with Rupees Eighty

9 823.71 enamel paint,brushing,interior to give aneven shade including cleaning the surface 87.98 Seven Paise Ninety Smt

aneven shade including cleanicn the surface of all dirt,dust ando ther foreign matter. Eight Only

Sr No Qty. Item Rate Rate in Words Unit Amount

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on

10 134.40 10mm thick cement plaster1:3(1-cement:3-coarsesand)and jointed with white cement 1054.67 Smt

Four Paise Sixty

slurry (upto 10 ton)

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and

11 32.00 landing laid on a bed of 12mm thick cement mortar1:3 (1-cement:3-coarse sand) 917.25 Smt

Seventeen Paise

finishing with flush pointing in white cement. (upto 10 ton)

Twenty Five Only

Providing and laying Vitrified tiles 8to10mm thick,24''x24''in flooring treads of steps and

Thousand Seventy

12 189.00 landing laid on a bed of 12mm thick cement mortar1:3(1-cement:3-coarse sand) 1073.13 Smt

finishing with flush pointing in white cement. (upto 10 ton)

ProvidingandlayingpolishedKotastoneslabflooringover20mm(Average)thickbaseofceme Rupees One

ntmortar1:6(1-cement:6- Thousand Ninety

coarsesand)orL.M.1.1.5laidoverandjointedwithgreycementslurryincludingrubbingandpoli Six Paise Thirty

shing etc. complete. (B) 30 mm thick Three Only

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

14 526.40 686.90 hundred Eighty Six Smt

Confirming to IS 15658 : 2006 including 35 mm Sand

Paise Ninety Only

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

hundred Sixty One

15 162.00 concret as per approved design and including 361.64 Rmt

Paise Sixty Four

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing wshdown water closet (European type,W.C.Pan) with integral P or

S trap including jointing the trap with soil pipe in Cement Mortar1:1(1-Cement:1-fine

16 7.00 1303.71 hundred Three No

sand) (Seal and cover to beme as ured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water closet squatting pan including

hundred Fourteen

17 7.00 jointing the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine 314.97 No

sand)(A) Vitreous China.

Sr No Qty. Item Rate Rate in Words Unit Amount

Providingandfixing12.5LitreshighlevelC..I.flushingcisternwithApairofC.I.orMildsteelbrack Rupees One

ets,wompletewithfittingssuchassyplionicarrangement,15mmnominalsizebrassballvalvew Thousand Five

18 7.00 ithpolythenefloat,leverG.I.China(60cm.)andpullunionandcouplingsforconnectionswithinle 1554.32 hundred Fifty Four No

t,outletandoverflowpipesetc.includingcuttingholesinwallsandmakinggoodthesame(overfl Paise Thirty Two

owpipe to be measured and paid fo separately ) Only

ProvidingandfixingwashbasinwithsingleholeforpillartapwithC.I.orM.S.bracketspaintedwhi Thousand Four

19 7.00 teincludingsuttingholesandmakinggoodthesamebutexcludingfittings.(A)VitreousChina:(ii 1414.18 hundred Fourteen No

)FlatBackwashbasin550mmxv400mmsize.(i)In white colour. Paise Eighteen

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated hundred Fourteen

screws down Bib Tap. (ii) 20mm dia. Paise Eighty One

Providing and fixing pillar tap,capstan head,screw down high pressure with hundred Fifty Four

screws,shanks and back nuts. (ii) 20mm dia. Paise Sixty Nine

22 7.00 Providing and fixing brass screw down stop tap.(C)25mm dia 223.81 No

Three Paise Eighty

23 7.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. 663.43 No

Three Paise Forty

Providing and fixing concealed center point to wall ceiling & floo C PVC (SDR13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of following

24 28.00 442.04 hundred Forty Two Rmt

dia.nominal bore tube fittings and clamps including making good the wall, ceiling and

Paise Four Only

floor etc. complete. [E] 40mm.

Providing and fixing S.W.gully trap with C.I.grating brick masonry chamber and water Thousand Two

25 7.00 tight C.I.cover with frame of 300mmx300mm size (inside) with standard 1292.19 hundred Ninety No

weight.(i)Square mouth traps.(B)150mm x 100mm size P or R type Two Paise

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure poluthene Rupees Three

pipes of the following out side Dia.Lowdensidy,complete with special falnge hundred Thirty Six

compression type fittings,wall clips etc.including making good the wall ceiling and Paise Twenty Four

floor.(G)110 mm Only

Sr No Qty. Item Rate Rate in Words Unit Amount

Providing erecting and fixing double coated Syntex or equivalent PVC.(ISI) water tank Rupees Three

27 5000.00 of required capacity each with all necessary fittings and connection etc.complete on 3.95 Paise Ninety Five Liter

Providing and fixing in true horizontal level 600 mm. X 600 mm. false ceiling system

manufactured by M/s. Armstrong World Industries using hot dipped galvanized steel

section, exposed surface with pre-coated capping, main tee of size 24 x 32 mm.,

having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary

stitched cross tee of size 24 x 27 mm, having 0.27 mm gauge at every 600 mm. c/c.

and sub cross tee of size 24 x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and

wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the

wall. The above grid is suspended at every 1200mm c/c. in both directions using

28 126.00 1328.15 hundred Twenty Smt

mm. thick pre-straightened GI wire laying FINE FISSURED BUTT Edge ceiling tiles Eight Paise Fifteen

manufactured by M/s. Armstrong World Industries, of size Only

600mmx600mmx15mm having NRC 0.55, Light reflectance of >84% (WT),

thermal conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of 99%

having Fire Performance CLASS O / CLASS 1 (BS 476), surface having 3 coats of

white paint with Fine Fissured, back of the tile duly sanded and finished with a

coat of protective paint over the formed grid complete

Sr No Qty. Item Rate Rate in Words Unit Amount

Providing and fixing 35 mm both side laminated single Shutter flush door

shutters fix in 63.50mm x 38 mm thick Anodized aluminum section frame

with extruded built up standard tubular sections/ appropriate Z sections and

other sections of approved make conforming to IS: 733 and IS: 1285, fixing

with dash fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight,

mitered and jointed mechanically wherever required including cleat angle, Thousand One

29 24.57 with necessary aluminum hardware accessories , fittings , hinges , handle , 6171.61 hundred Seventy Smt

hold draft , lock . The both side laminated 35 mm thick flush door shutters One Paise Sixty

solid core construction with aluminum frame of, including anodized aluminum Only

butt hinges with necessary screws. (B) decorative type and block board core

anodized aluminum butt hinges in flush door shutters (2) 35 mm thick with

aluminum frame .

Providing & fixing hydraulic door closer (to carry a door width upto 1000mm) with hundred Ninety

screws to pivoted / hinged door of approved make & color Etc.comp. Eight Paise Ninety

Providing & fixing in position standard extruded Aluminium Partition with Colour

anodized of 30 micron hollow section frame (any Span Should not be wide than

mtr)of approved shade & pivoted single shutter fabricated from alluminium standard

section for outer frame size 101 mm x 44.5 mm (of app. Wt. 1.2 kg / Rmt.) and door Rupees Three

styles and top rial of alluminium section size 47.5mm x 44.5 mm (of app. Wt. 1.05 kg/ Thousand Six

31 165.20 Rmt.) Bottom rail & lockrail for door of size 114mm x 44.5mm (of app. Wt 1.30 3661.25 hundred Sixty One Smt

Kg./Rmt.) and providing rubber gasket and glazing chips around the glass allover Paise Twenty Five

including providing heavy handle, heavy lock, Door Closer,bracket, stoppers. 5 mm th. Only

transparent float glass of copper/ gray tint (Structural Glass) fixed with transparent

silicon gasket and 6 mm thick compact Sheet in bottom panel including all required

materials labours and equipments as per detailed drwg. as directed.

Sr No Qty. Item Rate Rate in Words Unit Amount

providing and fixing alluminium colour anodized single shutters door having

standared extruded alluminium colour anodized of 30 micronhollow sections

frame of size 101 mm x 44.5 mm (aproximate wt 1.2 kg per Rmt) and door

styles and top rail of alluminium section size 47.5 mm x 44.5 mm

(approximate wt 1.05 kg per rmt) and bottom rail and lock rail per door of

size 114 mm x 44.5 mm ( aproximate wt 1.3 kg per rmt) and providing Rupees Three

rubber gasket and glazing clips around the glass all over including providing 6 Thousand Four

32 21.42 mm thick compact sheet with fixing Glasing clips 19 X 17 mm including 3435.01 Smt

hundred Thirty Five

providing heavy locks handels stopers pivots door closers and Ground Glass 5 Paise One Only

mm thick (Frosted or obscured on one side) on top with fixing Glasing clips

X 17 mm including all labour and equipments etc complete

Steelwork, riveted in built up sections framed work including cutting,hoisting,fixing in

position and applying a priming coat of read lead paint. (A) In beams and Quint

33 193.20 8413.48 hundred Thirteen

joists,channels anglesTees,flats,with connecting plates oranglecleatsas in main and al

Paise Forty Eight

cross beams.Hip and jack rafters,purlins conneted to common rafters and the like

Providing and laying cement concrete 1:4:8 (1- Rupees Two

Cement : 4- Coarse sand : 8- Graded Brick bats Thousand Six

34 70.50 aggregate 40mm normal size) and curing complete 2660.45 hundred Sixty Cmt

excluding cost of formwork in (A) Foundation and Paise Forty Five

Rupees Thirty Two

Clearing and grubbing road and including aprooting rank vegetation , grass bushes , Thousand Three

35 1.00 shrubs , saplings and trees girth up to 300mm removal of stumps of trees cut earlier 32338.19 hundred Thirty Ha

and disposal of unserviceable materials(B) By manual in area of thorny Jungle Eight Paise

Supply and Fixing of alluminium Zinc Alloy coated galvalum steel sheet of 0.5mm thick Thousand Nine

36 784.00 with all accuracies and accessories materials cost and conveyance and labour charges 1989.20 hundred Eighty Smt

for fixing in position etc. complete for roof covering of shed as directed by E.I.C Nine Paise

Sr No Qty. Item Rate Rate in Words Unit Amount

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50x38.10x1.95mm,@Wt1.094 Kg/Rmt,horizontal two track member

size 61.85mm x 31.75mm x 1.20mm @ wt . of 0.695Kg/mt,vertical member of

37 100.08 [email protected]/mtwithslidingshuttersofhorizontalmembersize40mmx 1713.70 Smt

hundred Thirteen

[email protected]/mt,[email protected]

Paise Seventy Only

0.456Kg/mt,@Wt.0.457Kg/mtwith5mmthicktransparentbronzecolourtintedfloatglasswith

powdercoatedaluminumfittingsandfixturesandtransparentsiliconsealantglassfixingtofram

e as per details etc complete for window.

Providing & laying sandwich platform comprising of a) Sandwich of 18 mm thick single

side polish Granite of approved size, shade and sample on top and 25 mm thick

polished kota in bottom with 25mm thick cement mortar (1:4) in between b) At centre

vertical sandwich supports of 25 mm thick two kota stone on sides and 20mm CM

(1:4) in between and at both end walls vertical supports of 18 mm thick double side

granite. c) 75 mm raised platform at bottom with kota on top and 50mm CM (1:4) at

38 38.25 5235.84 hundred Thirty Five Smt

bottom, kota stone skirting as per design and approved sample. The rate includes

Paise Eighty Four

rounding, champhering and mirror polishing of edges, facias of granite, MS support

including necessary bonding adhesive (if required) of BASF / Fosroc / BAL / Laticrete /

Kerakoll or equivalent as per approved make. Rate shall be also inclusive of making

holes & cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as directed by

engineer in charge. (Only plan area shall be measured & paid for).

Providing and fixing rolling shutters of approved make made of 80mm wide M.S.lath Rupees Three

sinter-locked together through the irentire length and jointed to getherat the ends by Thousand Seven

39 74.40 end locks mounted on specially designed pipes haft with bracket plates,guide channels 3733.55 hundred Thirty Smt

and arrangements for inside and outside locking with push-pull operation complete but Three Paise Fifty

excluding the cost of hood cover and spring. (B) Shutters having width above 3.5 M. Five Only

Providing and fixing 27.5cm.long wire spring grade No.2 of approved make for rolling hundred Thirty

shutters. Seven Paise

Twenty Two Only

Providing and fixing Hood cover for rolling shutters (B) Shutters having width 3.5 hundred Twenty

meters and above Six Paise Seventy

Sr No Qty. Item Rate Rate in Words Unit Amount

This is certify that the rates are adopted as per S.O.R 2025-26

I / We am / are willing to carry out the work * Estimated amount put to Tender

Add / Deduct …………………….. % above / below

1 All works shall be carried out as per Public Work Department and other specification of division or as directed.

2 All the columns in schedules should be filled in ink and the total of the entires ink last column should be struck by the

3 Rates quoted include clearance of site (prior commncement of work and its close). In all respect and hold good for work

4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per

5 To be continued on additional sheets, if found necessary.

Deputy Executive Engineer Executive Engineer

PIU-2 , Ahmedabad PIU-2 , Ahmedabad