Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95,884Accepted-AOC 676301 | MALAPPURAM | KERALA | 676301 | L1 | Accepted-AOC L1 |
Tender Value
₹96,158
EMD Value
₹2,404
Closing Date
6 Nov 2024, 2:00 pmClosed
ASSISTANT ENGINEER
OFFICE OF ASSISTANT ENGINEER LID EW SECTION PUNNAYUR GP
Electrical Work
2024_LSGD_696088_2
276/25 PallitthazhamCompletion2nd Phase Electrical
Open Tender
Electrical Works
Item Rate
180 days
Punnayur GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
₹2,404
20 Feb 2025
28 Oct 2024
7 Nov 2024
28 Oct 2024
6 Nov 2024
28 Oct 2024
Amount
ELECTRICAL
OD121177/2024-2025:Supply of 5 HP Three phase monoblock pumpset in open well motor pump set suitable for operation of 400V,50Hz A.C.supply having 51 mtrs head range, capable of discharge 3.5 LPS of clear water at 51 mtrs head (Kirlosker - KDS 550 mono block, having suction 50 mm, delivery 40 mm/equivalent make Akash/Texmo/Deccan)etc as required
OD121176/2024-2025: Charges for installation of above 5 H.P, 3 phase , Monobloc pumpset into open well after connecting delivery pipes in trouble free operation and conducting trail run with load satisfactorly .
OD121182/2024-2025: Supply and providing 50 mm dia heavy duty duro flex /canoflex PVC flexible pipe as suction pipe
OD121181/2024-2025:Supply and providing plastic foot valve size 50 mm dia
OD121184/2024-2025:Supply and Installation of Hose Collar 50 mm
OD121187/2024-2025:Supply and Installation of Hose Clamp 50 mm
1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm
OD121188/2024-2025:Supply and providing PVC Elbow 40 mm
OD121189/2024-2025:Supply and providing PVC Tee 40 mm
OD121175/2024-2025:Supply and fixing L&T MD1-iU DOL Motor Starter with Dry Run Protection SPPR and Digital Amp Volt Meter including all connections etc as required. or Equivalent make
OD121192/2024-2025: Supplying , threading , laying and jointing of the following sizes of B' class GI pipe with all required accessories in ground in position 40 mm dia
OD121179/2024-2025:Supply and providing GM/ Brass 40 mm dia or nearest size wheel valve as required
OD121178/2024-2025:Supply and providing GM/ Brass 40 mm dia or nearest size Non-return valve as required
OD121180/2024-2025:Supply and providing 40 mm GI union
OD121183/2024-2025:Supply and providing good quality garware make nylon marine rope 16 mm size with required PVC tie-bad ad tieing the pump set with required outside the well
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.
90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm
14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
OD121355/2024-2025:Supplying and providing suitable size foundation bolts & nuts
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
OD121359/2024-2025:Providing and fixing test joint on watering pipe, made of 2 no. strips as mentioned below of the following sizes provided on either side of the conductors with 4 nos of GI bolts, nuts check nuts and spring washers etc. complete as required.2Nos 25x6 mm G.I. strip 200 mm long
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD121396/2024-2025:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x6mm brass nut and bolt
90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)
OD121432/2024-2025:Supply and providing dust and vermin proof, wall mounting, Hot press moulded SMC Cable junction box of following sizes suitable for fixing KSEB meter,fuse unit,CT etc hinged door construction for the front side with compartments if necessary,providing vision panel for the meter compartment cable termiation,knock out for cable entry and exit, 350x481x210mm or nearest size (Sintex GS-JB3750) or equivalent make)
OD121451/2024-2025:Supply and providing 32 A HRC fuse unit with HRC fuse link i the meter box and giving connections as required
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
OD121433/2024-2025:Supply and providing 4 pole enclosure for independent mounding of MCB/RCCB/Isolator etc.
OD121435/2024-2025:supply and providing M8 anchor bolt hook in wall / parapet for biding support for service main wire
OD121434/2024-2025:Preparing completion and test certificates for KSEB connection
Bidder Name
AK ELECTRICALS
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1093821.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .