Development of Yog Studio in East Zone area Garden (Above/Below)

Item Description of Item (with brief Quantity Unit Rate Amount

No specification and reference to book In

of specifications) figur

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

01 materials and disposing off the excavated stuff 516.00 Cumt 206.86

upto 50 Meter lead.(A) Loose

Providing and laying cement concrete 1:3:6

02 (1-Cement : 3- coarse sand : 6- hand broken

stone aggregates 40 mmnominal size) and 52.00 Cumt 3050.4

curing complete excluding cost of formwork

in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1-

03 Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing 78.50 Cumt 3619.93

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying controlled cement

04 concrete M.200 and curing complete excluding

the cost of formwork and reinforcement for 36.00 Cumt 3903.19

reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

Providing and laying controlled cement

concrete M.250 and curing complete excluding

the cost of formwork and reinforcement for

05 reinforced concrete work in 2.00 Cumt 4482.05

(C)Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor

Brick work using common burnt clay

building bricks having crushing strength not

06 less than 35 kg./Sq.Cm. in foundation and 174.00 Cumt 4111.95

plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B) Conventional

Brick work using common burnt clay building

bricks having crushing strength not less than

07 kg./Sq.Cm in superstructure above plinth level 129.00 Cumt 4391.01

upto floor two level (B) Conventional

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping etc.

Height of propping and centering below

08 supporting floor to ceiling not exceeding 4 M. 214.00 Sqmt 177.58

and removal of the same for in situ reinforced

concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc.

and Mass concrete.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping etc.

Height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ reinforced

concrete and plain concrete work in. (B) Flat

surfaces such as soffits of supspened floors

slabs Landings and the like. (1) Floors etc. upto

200 mm in thickness.

Structural steel work ( Confirming to IS 4923-

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

10 cutting, hoisting, fixing in position and applying 23200.00 Kg 129.85

a priming coat of approved steel primer all

complete as per the structural designs and

directions of Engineer in charge.

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two 343.50 Sqmt 190.50

11 level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

12 1:3 (1-cement : 3-sand) and 8mm thick 544.00 Sqmt 334.18

finishing coat of C.M. 1:1 (1-cement : 1-sand)

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

13 including cleaning the surface an even shade 800.00 Sqmt 89.11

including cleanicn the surface of all dirt, dust

and other foreign matter.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

14 thoroughly brushing the surface to remove all 544.00 Sqmt 116.24

dirt, and remains of loose powdered

materials.etc complete

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

15 placing in position complete upto floor two 12000.00 Kg 76.52

Filling in foundation and plinth with murrum or

16 selected soil in layers of 20cm. thickness

including watering, ramming and consolidating

Filling in foundation and plinth with brick Bats

17 Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

18 Providing & fixing Polished granite stone 20 to

25 mm thick black 424.00 Sqmt 2670.00

19 Providing & fixing Polished granite stone 20 to

25 mm thick colour 525.50 Sqmt 3850.00

20 Applying mirror finishing on marble/Kotta

stone flooring 939.50 Sqmt 160.00

Planning , Designing and cutting by CNC laser

21 cutting in require shape and size on M.S. 3mm 20.00 Sqmt 11540.00

thick sheet including Powder coating on it