Loading
Loading…
Loading…
Tender Value
₹9.9 L
EMD Value
₹19,800
Closing Date
30 Dec 2025, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT TENDER
5 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Checklist for Tenderer: The Tenderer shall submit signed copy of Check-list placed in documents attached with tender. The Tenderer shall also submit relevant documents of compliance of the checklist if any.
I/We have read the tender notice (NIT)detail, schedule of material and works and Tender document along with all the conditions attached/referred to, in this tender document and agree to abide by the said conditions.
It is certified that i am the authorized person to represent the firm and I am authorized to sign the tender and all the document on behalf of the firm.
I/We hereby agree to abide by the Indian Railway Standard General Condition of contract (GCC) with all correction slip up to date and to carry out the work according to the special conditions of contract and specification of material and works as laid down by Railway as mentioned in the tender document.
Bhavnagar Division:- Supply of signalling materials, digging & laying of signaling cable in connection of Dhola - Bhavnagar Term: Construction of RUB with single box size of 6.0M X 4.0M at LC-218 at Km 167/0-1.
45-2025~WR
45-2025
Open
Works - General
6 Months
Bhavnagar, Gujarat
₹0
₹19,800
30 Dec 2025
8 Dec 2025
16 Dec 2025
68 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,89,394.22 | ||
| — | 2.00 | — | — | ||
| Apparatus Case Single NE Rly Type as per Drg. No. W. Rly/SW/47/68Alt-A, fitted with two nos of E Type lock (ward No will be specified by Engineer-in Charge) as per RDSO Drg. No. SA3376/3473 and Key toDrg. No. 3377. Note: This item includes the supply & fixing of 2 Nos E Type Lock fitted on both doors, along with two Keys. | — | — | — | 30,815.26 | |
| — | 1.00 | — | — | ||
| Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied. | — | — | — | 5,107.22 | |
| — | 1.00 | — | — | ||
| Cable Route Tracer as per attached specification of 3M Dynatel/ Rycom / Radio detection make only. Detail specification attached. | — | — | — | 3,40,300 | |
| — | 100.00 | — | — | ||
| Disconnect Terminal Block, Screw less type, 4-wire front entry (Two in-put & Two out-put) The colour will be decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3) as per RDSO Spec. No. RDSO/SPN/189/2004. With latest amendments. | — | — | — | 5,846 | |
| — | 20.00 | — | — | ||
| Supply of End plate 2.5mm/0.091 in thick as per site requirement. | — | — | — | 214.8 | |
| — | 20.00 | — | — | ||
| Supply of End Stopper 10mm/0.0394 in width as per site requirement. | — | — | — | 214.8 | |
| — | 2.00 | — | — | ||
| Supply of Carrier Rails for above 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per site requirement. | — | — | — | 228.36 | |
| — | 500.00 | — | — | ||
| ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4. | — | — | — | 36,535 | |
| — | 5.00 | — | — | ||
| Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non-flame propagating type in 6 meters straight length and of size 120 mm outer die, & 103.5 mm inner dia. One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. | — | — | — | 9,880.3 | |
| — | 96.00 | — | — | ||
| Medium Class G.I. Pipes to IS: 1239 (Pt.I)-2004 or latest ; 100mm dia. (int. dia) mini 3.65 mm+/- thick with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes. | — | — | — | 60,252.48 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-uptoACS10_merged_compressed.pdf
ATTACHMENT
SignedJPOBVPDivisionforundertakingdiggingworkinthevicinityofSTandElectricalcablesmerged..pdf
ATTACHMENT
CHECKLISTFORTENDERERlessthan50Lacs.pdf
ATTACHMENT
Scheduleofwork.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .