CERTAIN REPAIRS TO FENCING, COMPOUND WALL, HARD STANDING IN MD/OTM ACCN OF CQA (ICV) AND MES UNDER AGE (I) FY EDDUMAILARAM

Amount

Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc. complete all as specified and directed

M & L 100 mm thick PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in hardstanding surface finished even and smooth without using extra cement complete all as specified and directed

Forming contraction (Dummy) joints 65mm deepx10mm wide, filled with sealing compound in grade 'A' complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection , finished even & fair without using extra cement complete all as specified and directed

Demolition of brick work or stone masonary, built in cement mortar.

M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & directed

All as per item No 07 above but except bricks

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 , brought to courses or regular coursed complete all as specified and directed

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, regular coursed, Secunderabad and Bangalore types for Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20 mm

M&L for Providing cement concrete in copings Type B-0 (1:2:4) 12.5 mm graded aggregate and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Taking down of cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,

M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of wall surfaces and applying three coats of white wash on internal wall surfaces complete all as specified and directed

Dismantling fencing wire mesh, any type

Dismantling of wrought iron or mild steel work of windtie of any description not otherwise provided for complete all as specified and directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ®complete all as specified and directed

M&L for preparation of new steel surfaces area exc 10 cms width /girth and finishing with two coats of synthetic enamel paint over a coat of redoxide primter complete all as specified and directed.

M&L of round bars mild steel bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of diameter of neck 5 to 10 mm, length of bolt exc 10cm and n exc 15cm long complete all as specified and directed

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard dense soil complete all as specified and directed

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

M&L for Providing cement concrete in copings Type C-1 (1:3:6) 20 mm graded aggregate for fencing poles complete all as specified and directed