ADDITION ALTERATION TO TOILETS AT SHIPS ARMOURY AT BLDG No.P 49 PROVISION OF TOILETS AND WC FOR CIVILIAN FEMALE STAFF AT HQST BUILDING P 41 INCL PROVISION OF PAVER BLOCK AND CHEQUERED TILES IN THE AREA AROUND TELEPHONE EXCHANGE P26 AT NAVAL BASE

Amount

M&L Surface dressing neexc 15 cm deep soft/loose soil complete all as specified

Excavation in trenches width n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified.

Removing excavated soil to a distance exc.250m but n.exc 500m and depositing where directed by Engr-in -charge.

Returning filling in soft/loose soil including spreading levelling watering and wall ramming in layers n/exc 25 cm thick all as specified and directed

M&L Plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation all as specified and directed

M&L for precast cement concrete block masonry in 1:3:6 type C1, (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed.

Damp proof course to horizontal or vertical surfaces including necessary formwork, 40 mm thick, in Cement concrete 1:2:4 type B0

M&L applying evenly a tack coat of bitumen 85/25 at the rate of 1.2Kg/sqm. including cleaning surfaces complete all as specified.

Supplying and laying Polythene film 150micron over bitumen coating complete all as specified and directed.

M&L RCC (Nominal mix ) 1:2:4 type B1 (20mm graded stone aggregate ) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC (Nominal mix ) 1:2:4 type B1 (20mm graded stone aggregate ) for Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to flat rough finished concrete surface complete all as specified

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams,

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

All as per item No . 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4, type B1 using 20 mm graded aggregate as in coping and use and waste of formwork etc complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C-2 (Using 20mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete.

M&L for preparation of new surfaces of steel surface of any descriptions not otherwise described over 10Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Aluminium snap grid false ceiling on frame work of aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying one coat of white washing to new ceiling surfaces including preparation of surfaces cg complete all as specified as per manufacturer's instructions and all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & Smooth without using extra cement complete all as directed. Note: Water proofing compound shall be paid separately.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing all as specified.

S&F 100 mm long mild steel butt hinges complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminium bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F Aluminium powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 10mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

M&L for two coats of oil bound distemper over and incl a coat of 1.5 mm thick wall care putty to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation new plastered External surfaces of wall and applying two coats of weather proof (antifungal, Asian Ultima Protect or equivalent) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

S&F PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and PVC waste pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&FCP towel Rail 600mm long "D" type complete all as specified and directed.

S&F vitreous china soap dish fixed to wall with screw complete all as specified and directed.

Supply and fix 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Cutting openings, through brick walls (in cement mortar) for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m ®

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on internal walls and preparation of surface by applying a layer of 1.5 mm thick wall care putty and applying two coats of acrylic distemper oil emulsion using rollers of approved tint and make all as specified and directed by Engr-in-Charge .

M&L for complete removal of existing treatment on external walls and applying two coat of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint or equivalent) over a coat of damp proof primer at any storey, including provn and removal after use, of necessary scaffolding, complete all as specified and as directed by Engineer In Charge.

M & L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S & F 150mm dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend WC/MS clips etc fixed on walls complete all as specified

S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F 200mm dia of half round or 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips etc complete all as specified.

M&L for hume pipe septic tank 25 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete and provide new connections to the new septic tank

M & L for Cement concrete in surface channels and drains in pack 1:2:4 complete all as specified and directed

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 ( 40mm graded aggregate)

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in Cement mortar (1:4),

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment.

Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

S&F point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light / fan / ceiling fan point controlled by one switch complete all as specified and as directed.

All as per item No.68 here in above but for one 3 pin 5 Amp socket outlet / 5 pin 5 Amp socket outletpoint controlled by one switch on same board.

All as per item No.68 here in above but for one 5 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No. 68 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make- Anchor

M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make- Anchor

S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed. Make- Anchor

S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Make- Anchor

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F Tubelight fitting 1 x 20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete all as specified and directed. Make:REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL 1213T8 DSTL20WLED865SGLASS/CG/WIPRO

S&F mirror light 12 watt 50 Hz, 230 volts with all accessories and connection to the electric circuit complete all as specified. Make- Luker, Cat Part No. LMCL12 or eqquivalent in Wipro/ Philips.

S & F LED Mirror light fitting 10 watt with connected accessories complete all as specified & directed. Make:- Philips Cat Part No. BN 021 LED10S 6500 PSU GR S1 or equivalent

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, 1400 rpm complete including taking down all as specified. Make :- CG EXHD300-4-1 or equivalent from list

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

S&F SPN sheet metal enclosure for DB 4 ways Double door.

S&F MCB 'B' Curve 40 Amp SPN ,240 Volts Make L&T Cat Part No. BB20400B all as specified and directed.

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts,Make Schneider Cat Part No. A9N1P06B to A9N1P32B, all as specified and directed.

M&L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note:- Two run of 4 sqmm size PVCcable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion complete all as specified and as directed :

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 2 core 10 Sqmm all as specified and as directed .

S&F on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia including taking down old one complete all as specified and directed.

S&F on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia including taking down old one complete all as specified and directed.

S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. Make- Cera Cat Part No. F2004152 or equivalent

Supply and fixing of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge. (Make : Model No F2004151 of Cera or prayag/hindware/Jaguar)

S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge. Make- Cera Model No. F2004201 or equivalent.

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge. (Make : Model NO: F2002362 of Cera or equivalent.

Supply and fixing in pillar taps, swan neck spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed by the Engineer-in-charge. (Make : Model No:F2004105 of Cera or equivalent.

Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed by the Engineer -in-charge . Make:- Model No F9020203 of CERA or equivalent.

Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe all as specified and as directed by the Engineer-in-charge. (Make : Model No: F7020101 of Cera or equivalent.

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge.

S&F in replacement health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old one all as per specified and directed. Make- Cera Model No. F8030102 or equivalent

Shifting of storage water tank of any size or cap installed at height upto 3.5 mtrs including disconnecting of incoming/ outgoining connections complete all as specified and directed.

S&F Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters complete all as specified and directed.

S&F float valve synthetic (PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S&F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S&F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

M/s ANTONY THOMAS AND CO

Albert Rebello and Company

Anjaneya Builders and Designers

WELTRONENGINEERINGSERVICES

ANIE JOHN CONTRACTORS

REIGN CONSTRUCTIONS

MS BUILDERS