Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹63.6 LAccepted-AOC | ₹63.6 L Quoted ₹53.9 L | 1 | Accepted-AOC L1 |
| 2 | 2₹69.5 LRejected-AOC | ₹69.5 L | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | R K INDUSTRIES L1 | GOLDEN GLOBE INDUSTRIES L2 |
|---|---|---|---|---|---|
| 1.00Gypboard plain ceiling : Supply and fixing of M/S suspended ceiling as per levels marked in the mirror plan.Ceiling to have Al.perimeter channels of size. 0.55mm thick (Having one flange of 20mm and another flange of 30mm and web of 27mm)along the perimetre of ceiling screw fixed to brick wall/partition with the help of nylon sleeves and screws at 610mm C/C. Ceiling to have suspended GI intermediate channels of size 45mm (0.9mm thick with 2 flange of 15mm each ) at a spacing at 1220mm c/c suspended using ceiling angle of width 25mm x 10mm x 0.55mmfixed to soffit with GI cleat and steel expansion fastners.Ceiling sections of 0.55mm thickness having knuckled web of 51.5mm and 2 flanges of 26mm each with lips at 457mm c/c. 2.5mm tapered edge gypboard to be screw fixed to ceiling section with 25mm dry wall screws at 230mmc/c.Boards to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound .Joint paper tape and two coats of dry wall top coat suitable for gypboard.Rates to be inclusive of providing cutout for electrical fittings,grills,diffusers including providing / edge bead to be provided on edges Rate to be inclusive of all related labour,wastage,cost of materials transportation etc complete . | |||||
| 1.01 | Horizontal ceiling | 140 | Sqm | 985 ₹1.4 L | 8,100 ₹11.3 L |
| 1.02 | Vertical ceiling | 2.5 | Sqm | 1,600 ₹4,000 | 8,100 ₹20,250 |
| 2.00GENERAL DOUBLE SKIN PARTITIONS :Double skin partitions to be of various heights /finish as stated but of the following general specifications .partitions to be 7.5 cm thick with inside base frame in 19mm Mply @45cm c/c .Bothsides of frame to be in 9mm Mply with laminated finish. Bottom sections to be screwed to floor base frame using suitable anchor bolts .Rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items) | |||||
| 2.01 | dwarf/full height partitions | 35 | Sqm | 3,650 ₹1.3 L | 5,920 ₹2.1 L |
| 2.02 | Glass partitions: Providing and fixing of 12mm toughened glass as per design for the Manager cabin/ front.Glass to be fixed using wooden teak/beech beadings. Rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items) | 15 | Sqm | 5,600 ₹84,000 | 5,650 ₹84,750 |
| 2.03 | Providing and fixing of 12mm toughened glass as per design for the cash cabin sides/front .Glass to be fixed using spacers as per detailed dwg enclosed. All glass edges to be polished rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items) | 5 | Sqm | 3,500 ₹17,500 | 5,650 ₹28,250 |
| 2.04 | Aerocon partitions 50mm thick | 40 | Sqm | 4,800 ₹1.9 L | 3,770 ₹1.5 L |
| 2.05 | collapsible gate cover using laminated ply | 5 | Sqm | 4,000 ₹20,000 | 5,920 ₹29,600 |
| 3.00DOORS:Providing and fixing toughened glass door to Bank Entry . Door to be in toughened 12mm glass fixed on floor springs of good quality make.Doors to be hung using patch fittings. Rates to be inclusive of all hardware including SS handle 120 long on either side of door , locks etc complete. Rates to be inclusive of cost of materials, labor, transportation,scaffoldingetc complete ( refer bank approved corporate identity drawing for furniture & related items) | |||||
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
16 Dec 2024, 3:00 pmClosed
General Manager,Thiruvananthapuram
General Manager,Regional Office, East Fort Thiruvananthapuram.
Construction of strong room and interior works for Kilikolloor Branch,Kollam CPC,Thiruvananthapuram Region of KSCB LTD
2024_KSCB_704302_1
KSCB/R1/GAD/Kilikolloo/2024-25
Open Tender
Civil Works - Others
90 days
Kilikolloor
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,000
Yes
₹40,000
Yes
28 Mar 2026
11 Nov 2024
19 Dec 2024
11 Nov 2024
16 Dec 2024
13 Nov 2024
Amount
Gypboard plain ceiling : Supply and fixing of M/S suspended ceiling as per levels marked in the mirror plan.Ceiling to have Al.perimeter channels of size. 0.55mm thick (Having one flange of 20mm and another flange of 30mm and web of 27mm)along the perimetre of ceiling screw fixed to brick wall/partition with the help of nylon sleeves and screws at 610mm C/C. Ceiling to have suspended GI intermediate channels of size 45mm (0.9mm thick with 2 flange of 15mm each ) at a spacing at 1220mm c/c suspended using ceiling angle of width 25mm x 10mm x 0.55mmfixed to soffit with GI cleat and steel expansion fastners.Ceiling sections of 0.55mm thickness having knuckled web of 51.5mm and 2 flanges of 26mm each with lips at 457mm c/c. 2.5mm tapered edge gypboard to be screw fixed to ceiling section with 25mm dry wall screws at 230mmc/c.Boards to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound .Joint paper tape and two coats of dry wall top coat suitable for gypboard.Rates to be inclusive of providing cutout for electrical fittings,grills,diffusers including providing / edge bead to be provided on edges Rate to be inclusive of all related labour,wastage,cost of materials transportation etc complete .
Horizontal ceiling
Vertical ceiling
GENERAL DOUBLE SKIN PARTITIONS :Double skin partitions to be of various heights /finish as stated but of the following general specifications .partitions to be 7.5 cm thick with inside base frame in 19mm Mply @45cm c/c .Bothsides of frame to be in 9mm Mply with laminated finish. Bottom sections to be screwed to floor base frame using suitable anchor bolts .Rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items)
dwarf/full height partitions
Glass partitions: Providing and fixing of 12mm toughened glass as per design for the Manager cabin/ front.Glass to be fixed using wooden teak/beech beadings. Rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items)
Providing and fixing of 12mm toughened glass as per design for the cash cabin sides/front .Glass to be fixed using spacers as per detailed dwg enclosed. All glass edges to be polished rates also to be inclusive of all related materials costs,labour,wastage etc complete. ( refer bank approved corporate identity drawing for furniture & related items)
Aerocon partitions 50mm thick
collapsible gate cover using laminated ply
DOORS:Providing and fixing toughened glass door to Bank Entry . Door to be in toughened 12mm glass fixed on floor springs of good quality make.Doors to be hung using patch fittings. Rates to be inclusive of all hardware including SS handle 120 long on either side of door , locks etc complete. Rates to be inclusive of cost of materials, labor, transportation,scaffoldingetc complete ( refer bank approved corporate identity drawing for furniture & related items)
ENTRY DOOR
CABIN DOORS
Flush doors (FD) Providing and fixing general flush doors . Flush doors to be 2.5 cm thick with bothside Mply . Front face of doors to be in laminated finish with inside also in laminate finish .Rates to include door opening paneling in 8 cm x 1.5 cm beechwood /Teakwood . Rates to further include cost of door closer ,handles , lock etc complete . All exposed wood to be melamine finished .Rates also to be inclusive materials costs,labour ,transportation etc complete ( refer bank approved corporate identity drawing for furniture & related items)
Cash cabin doors :Providing and fixing of Cash cabin door.door to be 75 wide with 210 height. Door to be in 2.5 cm thick beech wood/Teakwood frame with top glass insertion and bottom in laminated Mply insertion . Rates to include cost of hinges,locks and Sshandles etc.All exposed wood to be melamine polished.Rates to be inclusive of materials costs,labour,transportation etc. ( refer bank approved corporate identity drawing for furniture & related items)
Supply and fixing wicket door 90x75cms(laminate finish)
Supply and fixing of Fibre toilet doors including frame
COUNTER AND RELATED ITEMS
Providing and fixing of main general bank counter. Counter to be of profile as per design with table top height (75cm ). Table top to be in laminte finish with front edge of double thickness lipping . counter to be of 15 mm mply base unit with individual draw unit as per dwg. for each counter staff . front face to have back painted glass finish . Rates to include cost of hinges ,locks and handles.Inside of counter to be painted finish . counter to have footrest and CPU stand for individual counter staff . all ply edges o be lipped and melamine faced Rates to be inclusive of materialscosts,labour ,transportation etc(ref dwg). Rates ti further include modular type side partition 60mm thick with 120 cms height , top portion in pin up / marker and bottom in powder cated metal embosed sheet finish. ( refer bank approved corporate identity drawing for furniture & related items)
Providing and fixing of counter of above specification with staff top @75 lvl and customer top @105 lvl with front face and top of customer top in corian material. ( refer bank approved corporate identity drawing for furniture & related items)
General specification similar to item 4.01
Supply and fixing of side tables for all counters /front office staff . side tables to be of size 95cm x 45 with 2 nos draw and bottom storage (side table height 72 cms ) . side table to be in 19/15 mm Mply with laminated finish . inside to be in painted finish . Rates to include cost of hinges ,locks and SS handles,sliding channels etc complete . Rates tobe inclusive of materials costs,labour,transportation etc. ( refer bank approved corporate identity drawing for furniture & related items)
supply and fixing of substaff table /auditor table size 150x60 including side table size 90 x 45 with specifications similar to manager table ( refer bank approved corporate identity drawing for furniture & related items)
Note Bundling table
STORAGE UNITS
Providing and fixing low height /full height storage units inside manager cabin/general areas , Storage units to be in base 19mm ply.Top of units to be of edge banded finish .Shutters to be in 19mm Mply with edge banded sides. . locks to be provided for each storage unit .Shutters to be fixed using 110 overlay autoclosing hinges .All shutters to have 4” SS handle . Iinside of storage unit to be in laminate finish . Storage to have 2 nos 19mm Ply intermediate inside shelves on each shutter bay .FINISH - inside laminated,top&shutters - edge banded ( refer bank approved corporate identity drawing for furniture & related items) Rates also to be inclusive of all related materials costs,labour,transportation etc complete
Providing vertical blinds for the windows
Blinds to be of branded make with 10 cm wide blinds controlled using high quality sliding and fitting mechanisum colour - as per approved colour scheme.
Providing emulsion paint as per approved colour scheme . emulsion to be applied over putty base with necessary primer coats emulsion to be applied using roller.
Providing emulsion paint as per approved colour scheme (kerala bank Burgandy color) . emulsion to be applied over putty base with necessary primer coats emulsion to be applied using roller.
Ordinary painting in OBD over necessary primer base
Writing table Supply and fixing of writing table of size 150x40 cms.Table to be made using 19mm ply with top in laminate finish. 5mm back painted glass to be laid over top. Top height to be at 100 lvl. Intermediate glass shelf in 12mm glass to be provided 15cms below top. Glass shelf to have edge polished finish. All exposed faces of table to have laminate finish.Rate to include cost towards cheque drop box, sujjestion box ( on either side of writing table below writing table) and pin up boad of size 150x 120 cms above writing table.(exeternal and internal faces has to be laminated) ( refer bank approved corporate identity drawing for furniture & related items)
Panelling for pillars , border at ceiling level and skirting lvl ( laminated ply)
Providing Al grills for the cash cabin top
Providing and fixing UPVC/WPC pantry cabinet in 19mm thick carcass and shutters with top in black granite.Shutters to be mounted on autoclosing hinges and cost to be inclusive of SS handles for shutters.
Providing and fixing UPVC/WPC pantrytop storage cabinet in 19mm thick carcass and shutters Shutters to be mounted on autoclosing hinges and cost to be inclusive of SS handles for shutters.
Supply and placing of dining table six seater with SS legs and laminated top including 3 dining chairs with SS legs and PVC/ Fibre seat.
CIVIL WORKS
PCC in cement concrete 1:4:8 mix, using 40mm nominal size broken stone. Including cost of materials, labour charge, conveyance etc.
Providing and placing reinforced cement concrete for wall M20 grade concrete 1:1.5:3 mix using 20 mm down graded coarse aggregate including cost of materials, labour charge, conveyance, curing, scaffolding, centering, shuttering etc complete. ( double layer steel as per structural details)
Providing, bending, laying, binding & fixing in position reinforcement 12mm steel bar for strong room wall & floor @ .93KG/M of TMT bar /grade FE 500, including supplying & providing soft annealed wire used for binding at all levels and locations for RCC work with all leads & lifts (as per structural design)
Providing & applying plastering in 12 mm thick with cement mortar 1:4 for RCC walls, columns, beams etc. including chipping concrete surface if required, finishing, scaffolding, curing, etc., complete:
Providing, bending, laying, binding & fixing in strong room ceiling mesh using 20mm dia steel bar @ 2.5 kg/m of TMT bar /grade FE 500, including supplying, welding & providing for existing RCC ceiling bottom. (as per structural design)
Steel fabrication using L angle 40X40X3 mm @ 1.8 kg/m along inside wall perimeter to support top steel fortification mesh.
supply and fixing of partition grill inside strongroom . Grill to be in 16mm rod at 15cm C/Cvertical and 4 nos 16mm rod horizontally welded on to 40x40x6mm angle . Rates to be inclusive of door of same spacification with locking systems.
Supply and fixing of ventilator in Aluminium louver with MS grill on the inside.
Supply and fixing of collapsible grill including enamel painting
Painting for steel fortification members
General flooring - Supplying and fixing of flooring with Vitrified tile (60x60cm) in cement mortor 1:4, including material cost, conveyance ,labour charges etc., complete.Rate to includes removal of existing floor tiles .
Toilet Tiling - Supplying and fixing of wall titling with Vitrified tile (60x60cm) in cement mortor 1:4, including material cost, conveyance ,labour charges etc., complete.Rate to includes removal of existing wall tiles .
Toilet renovation - Supply and fixing of the following sanitary fittings inclusive of all accessories , related labour, wastage etc complete
EWC ( jaguar make) single piece continental model inclusive of soft close seat cover all accessories ,trap etc complete
Supply and fixing of washbasin wall hung with half pedestral continental model inclusive of soft close seat cover all accessories ,trap etc complete
Supply and fixing of SS sink nirali /jayna ( single bowl only) inclusive of all accessories ,trap etc complete
Toilet renovation - Supply and fixing of the following CP fittings inclusive of all accessories , related labour, wastage etc complete
Shortbody tap
Sinkcock
Pillarcock
Anglecock
Bottletrap
Floor trap
Health faucet
General plumbing maintenance work
ELECTRICAL WORKS
KSEB METERING CUBICLE: Supply and fixing of CT Type KSEB metering cubicle made out of 16CRCA sheet powdercoated with approved shade consists of 100A TPN SFU with 80A HRC Links ,100A Bakelite HRC cutout with 80A HRC fuse Links with 100A Bakelite Type Neutral Link & provision for CT operated KWH meter supply and installation
OPTIONAL ITEM [EXISTING METERING PANEL : Supply and fixing of CT Type KSEB metering Equipments including 100A MCCB, set at 63-80A , 100A Bakelite HRC cutout with 80A HRC fuse Links, 100A Bakelite Type Neutral Link & making provision for CT operated KWH meter and CTs. This work includes all retro fitting / fabrication, replacement of Panel/ Chamber Doors OR Modification works within the existing Metering Panel, etc. complete as per standards and requirements as per the directions of the EIC.supply and installation
M. V PANELS/ DISTRIBUTION BOARDS
POWER SPLIT DB : Supplying,installing,testing &commissioning of 3 ph 4 Way,Vertical busbar,MCCB type Power Distribution Board, flush mounted on wall, sheet metal fabricated,powder coated,having dust proof and vermin proof,and hinged door with all internals such as DIN rails, neutral-link,interconnected wiring complete with earthing lugs, double door, IP42, with all connections and inter-connections and comprising the following Specific Components. (MDB) Incomer :1 No. 80A 4P, 25kA [Ics], MCCB with Shunt Trip [Wired from EL Relay] Outgoings:1 Nos. 40A, 3PMCB [1xUPS]1 Nos. 63A, 3PMCB [1xMDB, Spare] Bus Bars:125A Copper bus bars for phase and neutral. supply and installation
MAIN DB:Supplying,installing,testing &commissioning of 3ph 8way,vertical busbar,MCCB type Power Distribution Board, flush mounted on wall, sheet metal fabricated,powder coated,having dust proof and vermin proof,and hinged door with all internals such as DIN rails, neutral-link,interconnected wiring complete with earthing lugs, double door, IP42, with all connections and inter-connections and comprising the following Specific Components. (MDB) Incomer :1 No. 80A 4P, 25kA [Ics], MCCB with Shunt Trip [Wired from EL Relay] EL Relay [Electronic 0-300mA] with CBCT [ID-100mm] Outgoings:4 Nos. 32A, 3PMCB [1xUPS, 2xAC ODU,1xSpare] 1 Nos. 25A, 3PMCB [LDB] 2 Nos 25A (1.5TR-AC/PP) 4 Nos 20A (20/16A Socket Outlets, Spare) SPMCBs,10kA Bus Bars 125A Copper bus bars for phase and neutral. supply and installation.
DB [LIGHTING POINTS] Supply, installation, testing and commissioning of 4 way TPN MCB DB with the following: Incomer 25A, 4P, 30mA RCBO Outgoings: 8 Nos 6A and 4 Nos 10A SP MCBs supply and installation
UPS DB [UPS POWER DISTRIBUTION] Supply,installation,testing and commissioning of 12 way [12+4 Module] SPN MCB DB with the following: Incomer 40A, 2P, 30mA RCBO [High Immunity Type Legrand OR Equivalent] Outgoings: 6A/10A/20A, D-Curve SPMCBs - 10 Nos. supply and installation
UPS DB [ATM] Supply,installation,testing and commissioning of 8 way [6+2 Module] SPN MCB DB with the following: Incomer 40A, 2P, 30mA RCBO [High Immunity Type Legrand OR Equivalent] Outgoings: 6A/10A/20A, D-Curve SPMCBs - 4 Nos. Supply and installation
UPS CONTROL [INPUT] Supply, installation, testing and commissioning of 40, 4P, 100mA, RCBO with in suitable factory manufactured MS enclosure with all interconnections and wiring. Supply and installation
RAW POWER POINTS
Supply, installation, testing and commissioning of 32A Modular type DP switch control with in suitable sheet steel enclosure (Control Switch for Stabiliser out Put at Electrical Room and 1 Phase A/C Local Isolation) with supply and installation.
Supply, installation, testing and commissioning of 1 Nos. 16/6A, Multi Pin modular type socket with out control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Power Points & AC Indoor Points)
Supply, installation, testing and commissioning of 1 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Costomer area, Electrical Room.) with supply and installation.
Supply and installation 16A 2P +E-DP ,Legrand make Tempra plug and socket with 10A DP MCB etc ., complete (strong room) supply and installation
Supply ,installation&testing Legrand make 24hrs,modular timer (MicroRex-4128)in a suitable steel enclosure for ATM sign board. With supply and installation
RAW POWER COMPUTER POINTS
Supply, installation, testing and commissioning of 1 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Work stations/ Cabins etc.) with supply and installation.
UPS COMPUTER POINTS
Supply, installation, testing and commissioning of 1 Nos. 16/6A, Multi Pin modular type socket with 1 No. 16A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (UPS Power Points) with supply and installation
Supply, installation, testing and commissioning of 2 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (All work stations) supply and installation
POWER OUTLET - LOCAL ISOLATION
SITC of 32A TP MCB Isolator control with in suitable sheet steel enclosure for local isolation of A/C ODU supply and installation.
SITC of 40A TP MCB Isolator control with in suitable sheet steel enclosure for isolating total supply to DB except UPS with supply and installation.
LOCAL ISOLATION - OPTIONAL
SITC of 100A 4P MCCB Isolator control with in suitable sheet steel enclosure for isolating total supply to Bank except UPS with supply and installation.
LOCAL ISOLATION SITC of Lockable Push Button control with in suitable sheet steel enclosure for isolating total supply to Bank except UPS. This shall be wired from the MDB-02 MCCB Shunt Trip Coil suppply and installation.
SUB-MAIN POWER WIRING - COPPER WIRING
Supply, laying, testing and commissioning of submain circuits using 2 run 2.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 2.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring.(15A power points.) with supply and installation
Supply, laying, testing and commissioning of submain circuits using 2 run 4.0 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring. (15A power points and A/C points) with supply and installation.
Supply, laying, testing and commissioning of submain circuits using 5 run 6.0 Sqmm PVC insulated, FRLS, stranded copper cable [1x3 Phases and 2x1 nutral] along with 2 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductors through Flexible GI conduits with conduit glands, specials etc. including terminations complete as per standards. (UPS Power Points to UPS) with supply and installation.
Supply, laying, testing and commissioning of submain circuits using 3 run 10.0 Sqmm PVC insulated, FRLS, stranded copper cable [1x1 Phase and 2x1 nutral] along with 1 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductors through Flexible GI conduits with conduit glands, specials etc. including terminations complete as per standards. (UPS DB to UPS) with supply and installation.
CABLE LAYING:Supply and laying the following PVC insulated PVC sheathed armoured 1.1KV grade Aluminium /Copper conductor cable conforming to IS:1554 (part-1) in cable trenches or on convrete wall or through pipes as per specifications, cinluding providing of cable route makers in every 50M and at all strategic turning/ diversion points etc. Necessary clamping should be providing while burying cables in prepared trenches etc.as per standards.
4.0x35 Sq.mm, Meter Board to Split DB & MDB supply and installation.
4.0x10 Sq.mm, MDB to LDB supply and installation
3Cx2.5sqmm Copper cable (Glow Sigh Board) with supply and installation.
CABLE TERMINATIONS:Supply and providing end terminations using siemens type compression gland for PVC insulated and PVC sheathed armoured conductor cable 1.1KV grade for the followings sizes including earthing the glands as required as per standards.
4.0x35 Sq.mm supply and installation.
4.0x10 Sq.mm supply and installation.
3.0x2.5 Sq.mm Cu with supply and installation.
COPPER EARTHING CONDUCTORS:Supply, Laying/ fixing of earthing conductor of the following sizes/ type, jointing as per IS:3043/87 in trench walls pulling through pipes etc.as required.
Copper wire No.10 SWG supply and installation
EARTHING STATIONS- GRID Supply of all materials and providing pipe earthing using 40mm dia, 2.5 Mtr Long GI Pipe earth Electrode as per IS 3043 including excavation of earth pits in all class of soil, fixing funnel etc. shall be housed in a chamber of 30cmx30cmsx45cms covering the same using heavy duty C.I / RCC slab man hole cover etc. including filling with charcoal sand and salt complete as required. [Common Earthing] supply and installation.
EARTHING STATIONS - UPS - DRIVEN CHEMICAL EARTHING:Providing maintenance free earthing (MFE) comprising of 17mm dia, 3.0 mtr long copper bonded stainless / nickel steel alloy rod suitably joined together with threadless / compression couplers made of copper alloy including supply of copper coated steel rod, suitable clamps for connecting body earthing strips and all other accessories required for the total erection of the earthing system. The copper bonded rod shall have copper bonding thickness of 250 microns (minimum). The rod shall be driven in earth with augured hole dia of 75-100mm in ground. The conductivity / earth enhancement compound (Confirms to IEC:62651-7 with latest amendments) filled around the copper rod to a depth of 3.0 Mtrs from ground level. The remaining depth shall be compacted with hard/ soft soil for complete erection of the total system including civil works like excavation & refilling of earth, construction of earth pit chamber with Cover Plate OR RCC cover slab as required and as directed by Bank's EIC/ Consultant supply and installation
SAFETY EQUIPMENTS:Supply and providing the following safety equipments at site as per standards and requirements.
5 KG Dry Chemical Powder type (DCP) fire extinguishers having ISI mark along with mounting supports. With supply and installation.
Electrical ISI Grade Rubber Mat suitable for L.V Switchboards. (6' x 3' x 1/4") with supply and installation.
L.T./H.T Mettallic danger sign boards. With supply and installation.
PART- VI- DOCUMENTS & APPROVAL.
Preparation of necessary documents, forms, drawings, schemes, certificates,etc. and getting scheme approval, Energisation Sanction Orders etc. from the Department of ElectricaI Inspectorate for the installation. All statutory charges shall be reimbursed on production of proper receipts.
Preparation of necessary documents, forms, drawings, schemes, certificates,etc. and getting power allocation sanction and power connection from Power supply authorities/ Company. All statutory charges shall be remitted by the Clients.
PART-I-LUMINAIRES AND FANS Supply, installation, testing and commissioning of the following luminaires/fans using suitable mountings, 3-core extension wire, 6000K lamps and using GI Chain and Anchoring Hooks at Ceiling etc. complete as required.
Recessed mounting luminaires with 36W LED,6000K, 60x60mm Size, Suitable for Grid type Ceiling Complete with Lamps, Driver etc. (LM25-361-XXX-65-G1; Wipro make OR Equivalent) supply and installation.
Recessed Mounting down lights with 12W, 6000K, LED Spot Light Type: LD90-141-XXX-65-XX (Wipro Make OR Equivalent.) supply and installation.
LED Strip Light, 6000K, 18W per Mtr. With Drives and all supporting materials complete.Type: LD90-231-XXX-65-XX (Wipro Make OR Equivalent.) with supply and installation.
4', LED Tubes with Drive, etc. complete, Wipro/Philips with supply and installation.
Oscillating type wall fan 400mm (Crompton High Flow) with supply and installation.
200mm Exhaust Fans with Louvers supply and installation.
Mirror lamp with 10W LED 2 feet lamps supply and installation.
Supply and fixing of 10W LED Wall Bracket/ Bulk Head fitting (Philips) supply and installation.
Call bell electronic for Manager's Cabin (G M Make) supply and installation.
Supply of 1200 mm sweep, 35W, 350 rpm, BEE 5 star rated energy saving BLDC based ceiling fan and suitable for operation on 230V, 50Hz, 1Ø AC supply, complete with 300mm down rod, 2 Nos of canopies, shackle, rubber bush, 3 nos of blades, remote controller for On / Off operation with 5 speeds, minimum air delivery of 215 m3 / min, completely pre wired upto terminal block, etc., including supply of all materials for installation as required and as directed by EIC. (including supply and fixing of Anchor Fastener on RCC slab and fan hook if necessary), Star Rated but with out Regulator supply and installation.
LIGHTING POINTSSupply, laying, testing and commissioning of light/fan/5A SSO points using 1.5 Sqmm PVC insulated, FRLS, stranded copper conductor cable for individual lights and group controlled lights along with 1.5 Sqmm PVC insulated FRLS green color stranded copper conductor cable earthing conductor through 20mm dia, ISI Graded Rigid PVC Conduits black with all specials including fixing MS Control boxes, modular switches, 3 plate ceiling roses etc. where ever necessary, under consealed / Surface conduit system of wiring. Proper color coded wires shall be used for the entire wiring.
One light point controlled by one No. 6A switch and Cove Light Points supply and installation.
Two lights points controlled by one No. 6A Switch supply and installation.
Three lights points controlled by one No. 6A Switch supply and installation.
One 5A SSO point combined in light control board supply and installation.
One 5A SSO point at independent position for TV/ Wall Fan/ Other Light Equipments point Etc.supply and installation.
SUBMAIN CIRCUITS:Supply, laying, testing and commissioning of submain circuits using 2 run 2.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 2.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring. with supply and installation.
Supply, laying, testing and commissioning of submain circuits using 2 run 1.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 1.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring supply and installation.
LAN SYSTEM
Supply and Laying of Computer (LAN) socket and Voice wiring using one run of four pair CAT- 6 Unshielded Twisted Pair (UTP) Cable through 20mm rigid PVC conduit/ PVC Casing Caping. (Excluding Conduits) supply and installation.
Supply and fixing of LAN Information outlet UTP CAT 6, Shuttered Flush mounted with face plate and GI / PVC mounting box including terminations supply and installation.
Supply of Cat 6 Patch / Mounting Chords
2meter long
1meter long
NETWORKING AND ACCESSORIES
Supply & fixing of LAN patch panel CAT-6, 16 Port with in the Networking Rack and giving terminations for cables from LAN Info. Outlets supply and installation.
NETWORK RACK: Supply and Installation of 9U, Wall Mounting Open type, Networking Rack with ladder kit-500mm width, for Data Components, Horizontal Power Strip controlled by 1 no. 16A DP switch each, and with all necessary accessories/ components required for the installation, including Mounting frame etc with supply and installation.
VOICE SYSTEM (TELEPHONE)
Supply and laying one run of Twenty pair jelly filled telephone wire upto Terminal connectors thruogh 25mm Dia. Conduits with supply and installation.
Supply and drawing 2pair 0.5mm telephone cable through 20mm dia. ISI marked medium duty conduits and accessorie with supply and installation.
Supply and providing telephone outlet points using RJ-11 modular sockets/ Jack within suitable MS control boxes with supply and installation.
Supply and providing Telephone Terminal box, Sheet Steel Powder Coated with 20 Pair Crone connectors including all terminations with supply and installation.
CONDUIT LAYING FOR VOICE/DATA CABLING:Supply and laying of the following sizes of Electrical rigid PVC conduits of ISI grade, medium duty for laying recessed through brick wall or in surface through/ wall false ceiling / 25mm PVC casing and caping in surface etc. The work should also include fixing of pull out boxes/junction boxes etc. The PVC conduits for laying of LAN information Cables should be laid with standard clearances as required under the guidance of a certified system Integrator, under consealed conduit system of wiring.
Supply, installation, testing and commissioning of 20mm DIA rigid PVC conduits of ISI Medium Duty supply and installation.
Supply, installation, testing and commissioning of 25mm DIA rigid PVC conduits of ISI Medium Duty supply and installation.
Supply, installation, testing and commissioning of 25mm PVC Casing and Caping supply and installation.
AIR CONDITIONING WORKS MACHINE SIDE MAKE - BLUESTAR / DAIKIN / MISTUBHUSHI / VOLTAS / HITACHI / CARRIER (Inverter Machine) CEILING MOUNTED CASSETTE UNITS (Inverter type) Supply of Air Cooled Split type Air Conditioners comprising Ceiling Mounted Cassette type Indoor Units , R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Drain Pump, Motorised Drain Pipe Connections, Vibration Dampers, Power connections, Operating on 380-415 Volts / 50 Hz, 3Phase Supply, and Cordless remote control.
4 TR 4 Way Ceiling Mounted Cassette type Units
HIGHWALL SPLIT UNITSBLUESTAR / DAIKIN / MISTUBHUSHI / VOLTAS / HITACHI / CARRIER (Inverter Machine) (3 Star - Inverter type) Supply of Air Cooled Split type Air Conditioners comprising High wall split Indoor Units ,R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Power connections, Operating on 230Volts / 50 Hz, Single Phase Supply , and Cordless remote control.
1 TR Split Units
1.5 TR Split Units
2 TR Split Units
LOW SIDE ANCILLARY WORKSCEILING MOUNTED CASSETTE UNITS (Inverter type) Installation Testing & commissioning of Air Cooled Split type Air Conditioners comprising Ceiling Mounted Cassette type Indoor Units , R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Drain Pump, Motorised Drain Pipe Connections, Vibration Dampers, Power connections, Operating on 380-415 Volts / 50 Hz, 3Phase Supply , vibration isolation pads and Cordless remote control.
4 TR 4 Way Ceiling Mounted Cassette type Units
HIGHWALL SPLIT UNITS (3 Star - Inverter type) Installation Testing & commissioning of Air Cooled Split type Air Conditioners comprising High wall split Indoor Units ,R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Power connections, Operating on 230Volts / 50 Hz, Single Phase Supply , vibration isolation pads and Cordless remote control.
1 TR Split Units
1.5 TR Split Units
2 TR Split Units
REFRIGERANT PIPING (MAKE:COPPER PIPE-TOTAL LINE,MAXFLOW,UNIFLOW) (MAKE: INSULATIONS - TOTAL LINE,SUPERLOAN) Supply Installation and Commissioning of Hard/Soft copper Refrigerant piping, complete with fittings, elbows, bends, supporting arrangement on walls (RMT:Suction & Discharge)
4 TR 4 Way Ceiling Mounted Cassette type Units
1 TR Split Units
1.5 TR Split Units
2 TR Split Units
CONTROL CABLING (MAKE: FINOLEX,V GUARD) Supply & Installation of 2 Core PVC Insulated flexible control cable with saddles / supportes and PVC conduits to connect outdoor unit with Indoor unit
DRAIN LINE (MAKE:SUPREME,FINOLEX,ASTREL) Supply & Installation of insulated PVC drain pipe of 25mm dia
Core cutting for copper pipes/Drain pipes
STABILIZER ( V GUARD / SYSCOM )
Supply and installation of 4kva stabilizer for Hi Wall unit.(MAKE:V GUARD / SYSCOM)
Supply and installation of 5kva stabilizer for Hi Wall unit.(MAKE:V GUARD / SYSCOM)
Supply & Installation of timer for split units
OUTDOOR STAND
Supply & Installation of wall mounted support for ODU of Cassette AC
Supply & Installation of wall mounted support for ODU of split AC
Transportation,loading and unloading o for the above machines
GOLDEN GLOBE INDUSTRIES (BID ID -1997065)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_1101413.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid