Construction of new 11kV feeder by drawing 6500m 11kV UG cable by HDD method from Meppayur 110kV SS to Madathilkuni under ES Naduvannur

Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.

Horizontal Directional Drilling across/along road side with supplying pulling110mm HDPE pipe PN8PE100 and drawing the cable through the pipe,including surveying of the site for collecting information about underground utility installations and other obstructions using suitable modern sensing equipments,pit marking ,pilot drilling ,pre-reaming,closing of pits with normal soil and consolidation or by any methods as directed by road authorities,without damaging other utility installations ,providing HDD route markers at pit locations and Danger /Caution boards as per the direction of Dept.Officers etc.complete including cost of HDPE pipe, preparation of drawings for submission for road crossing approval ,cost ofall material ,labour,hire and conveyance charges and submission of final HDD profile drawing.Horizontal Directional Drilling across/along road side with supplying pulling110mm HDPE pipe PN8PE100 and drawing the cable through the pipe, including surveying of the site for collecting information about underground utility installations and other obstructions using suitable modern sensing equipments, pit marking ,pilot drilling ,pre-reaming,closing of pits with normal soil and consolidation or by any methods as directed by road authorities, without damaging other utility installations ,providing HDD route markers at pit locations and Danger /Caution boards as per the direction of Dept.Officers etc.complete including cost of HDPE pipe ,preparation of drawings for submission for road crossing approval ,cost of all material ,labour,hire and conveyance charges and submission of final HDD profile drawing.

Doing one cable end termination on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers.

Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.

Fitting and erecting one HT PSC SinglePole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).

Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

Mounting and connecting HT XLPE UG cable ends of all sizes upto and including 3x300 sq mm with special type cable clamps, bolts, nuts, terminal protectors etc.including cost of extra materials if needed and giving necessary jumper connections.

Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.