Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.9 L
Closing Date
10 Jun 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SRDSTE/RJT
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of tender. NOTE: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of similar nature of work: - "Any signaling work involving outdoor work and/or addition and/or alteration in existing indoor signaling system. OR any CLS or RI or EI or TPWS or IBS or ABS or BPAC work involving Indoor and /or Outdoor. Similar work to include indoor if the tendered work involves addition and/or alteration in existing indoor signaling system and outdoor if the tendered work involves outdoor work OR Any such work involving activities as given in the name of tendered work."
18 conditions · 3 needing a document upload
1.EMD/Bid security is deposited as per Clause 5 of Part I ""regulations for tenders and contract " of tender document. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing upto 50 Lakhs: - No technical and financial credentials required but firm's documents and any other mandatory documents which are demanded in tender are require to be submit at the time of bidding. 4. tender having value more than 50 Lakhs: - Financial and technical credentials required as per GCC applicable and firm's documents and any other mandatory documents which are demanded in tender are require to be submit at the time of bidding.
1. If Tenderer is sole proprietor: Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern or any other documents such as GST Certificate, PAN Card of firm Name etc. is to be submitted. 2. If Tenderer is partnership firm: Notarized partner ship deed Original/Notarized power of attorney. 3. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 4. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 5. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favour of the tender signatory. 6. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rajkot Division- Proposal for Provision of Outsourcing of the part supply, installation, testing and commissioning in connection with work for repair and maintenance of outdoor signaling gears in the ADSTE/RJT Section of RJT division in Year 2026-67 of Western Railway.
DRM-RJT-26-27-SNT-E-06
DRM-RJT-26-27-SNT-E-06
Open
Works - General
12 Months
Rajkot, Gujarat
₹0
₹2.9 L
10 Jun 2026
20 May 2026
27 May 2026
195 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 27,12,639.4 | ||
| — | 150.00 | — | — | ||
| Point insulation Complete set as per RDSO Specification IRS: S-40/84 for Switch bracket, Split-Stretcher bar & Gauge tie plates (52 Kg/60Kg as per site requirement). | — | — | — | 2,01,889.5 | |
| — | 50.00 | — | — | ||
| Gauge Tie plate nylon insulation as per RDSO Drg No: T- 10372Alt2, T- 10368, T- 10371Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS: S-40/84 with latest amendments as applicable. | — | — | — | 75,184 | |
| — | 500.00 | — | — | ||
| Provision of Field accessories of DC Track Circuits GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding. | — | — | — | 34,085 | |
| — | 10000.00 | — | — | ||
| Provision of Field accessories of DC Track Circuits Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S- 69/M. | — | — | — | 60,400 | |
| — | 20.00 | — | — | ||
| Hydrometer, Exide make or similar for measuring the specific gravity of Battery Graded acid with mounting stand in location Boxes. | — | — | — | 5,649.2 | |
| — | 20.00 | — | — | ||
| Miniature, Plug-in Type, DC Neutral Line, Non AC Immunized Relay, Style QN1, 24 V DC, 8F-8B/12F-4BContact, Code ABCDF/ABCDE Spec: BRS: 930; IRS S 34; IRS S 23. | — | — | — | 85,689.6 | |
| — | 20.00 | — | — | ||
| Miniature, Plug-in Type, DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F-8B/12F-4BContact, Code ABDGH/ABDFH Spec: BRS: 931A; IRS S 34; IRS S 23; IRS S 60-78. | — | — | — | 1,11,520.8 | |
| — | 10.00 | — | — | ||
| Miniature, Plug-in Type, DC Neutral Line Magnetically Latched Relay, Style QL1, 24 V DC, 11F-4B Contact, Code ABDEG Spec: BRS:935A ; IRSS 34 ; IRS S 23. | — | — | — | 73,904.4 | |
| Plug in Type, Tractive Armature, AC Immunized, DC Biased Contactor Relay, Style QBCA1,2HF-4B Contact,24 V DC, Code BCEJK Spec:BRS:943 ; IRS S 34 ; IRS S 23 ;IRSS 60-78. | — | 10.00 | — | — | |
| — | 10.00 | — | — | ||
| — | 900.00 | — | — | ||
| — | — | — | 52,677 | ||
| — | 150.00 | — | — | ||
| — | — | — | 1,660.5 | ||
| — | 150.00 | — | — | ||
| — | — | — | 1,629 | ||
| — | 25.00 | — | — | ||
| — | — | — | 1,43,323 | ||
| — | 10.00 | — | — | ||
| — | — | — | 27,989.9 | ||
| — | 5.00 | — | — | ||
| Transportation of S&T material leading up to 1 Km including Loading from Starting point, unloading & Stacking at destination. | — | — | — | 2,262.9 | |
| — | 300.00 | — | — | ||
| Extra for each additional 1 Km or part thereof | — | — | — | 1,230 | |
| — | 2400.00 | Man-Days | — | ||
| As and when required by the Engineer in charge arranging /providing of labors for various safety related works such as protection of track etc. with contractor's T&P, equipment, hand signal flags, spanners, hammers, etc. as per specification special conditions and detailed scope of work as furnished in the tender and directed by the engineer incharge. | — | — | — | 15,59,304 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACSUPTO11_compressed.pdf
ATTACHMENT
DRM-RJT-26-27-SnT-E-06-GCC2022ACS11.pdf GCC with ACS up to 11
ATTACHMENT
SpecialconditionofcontractOutsourcingRJT.pdf Special condition of contract
ATTACHMENT
TechnicalspecificationofWork.pdf
ATTACHMENT
DRM-RJT-26-27-SnT-E-06-GCC2022ACS11.pdf
ATTACHMENT
SpecialconditionofcontractOutsourcingRJT.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .