Enquiry No I-13195/WEB/CONT/BT

Amount

Termination of 1.1KV grade cable 3.1/2C x 95 Sq.mm to 120 Sq.mm through suitable glands & lugs. The glands & lugs shall be supplied by the Contractor.

Repair of 250W HPMV & above fittings by replacing reflectors, bulbs, choke & ignitors. The materials shall be supplied by HCL/ICC.The job includes opening & reinstallation of light fixture.

Repair of Below 250W light fittings. by replacing reflectors, bulbs, choke & ignitors. The materials shall be supplied by HCL/ICC.The job includes opening & reinstallation of light fixture.

Installation/testing & commissioning of TPN Switches above 160A to 250A.

Installation, testing & commissioning of 63A TPN S/F unit

Replacement of 15/20A tumbler switches/toggle switches or Rotary switches. from the existing lighting/welding DBs or any other place & necessary painting of the DBs after tit bit repair.

REPLACEMENT OF OLD DAMAGED AL. CONDUCTOR PIPE WITH NEW ONE, EACH LENGTH 4 MTR. OD 3", WITH AL. CLAMP & TIGHTENING WITH G.I. NUT, BOLTS & SPRING WASHERS, (AL. PIPE, CLAMP, NUT, BOLTS & WASHER WILL BE SUPPLIED BY HCL/ICC FREE OF COST)

Supply of complete material of stay set & associated civil job along with fixing of stay wire across H Poles/tubular pipe poles/towers of 33KV O/H transmission line civil job includes excavation of stay pit, fixing of stay rod & their concr

PCC concreting of damaged foundation of H Pole/tower of overhead transmission line. Job includes excavation in any type of soil at base of H Pole/tower, dismantling of damaged concrete foundation, shuttering & PCC concreting mix (1:2:4).

Laying/Re-routing of 1.1KV grade PVC armoured cable of size 3.1/2C x 95 to 120 Sq.mm. PVC armoured cable.

CONSTRUCTION OF 3.5 M DEEP EARTH PITS NEARBY H POLE OR TOWER OF OVERHEAD LINE ALONG WITH SUPPLY OF ALL DESIRED MATERIAL FOR THEIR CIVIL JOB AS WELL AS FOR EARTHING CONNECTION WITH H POLE & O/H EARTHING WIRE.

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/heat shrink type and straight through jointing (M.Seal type). The termination/striahgt through jointing kit shall be supplied by the Contractor. Size 3C x 150 Sq.mm.

Digging of cable trench and its refilling by excavated soil, sand and bricks after laying the cables. Size of trench 300mm x 950 mm depth.

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/heat shrink type & straight through jointing (M.Seal kit).The termination/straight through joint kit to be supplied by the Contractor.Termination of 11KV cable 3Cx120-185 Sq.mm.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 3.1/2C x 150 Sq.mm to 300 Sq.mm .

Termination of 1.1KV grade cable through suitable glands & lugs The glands & lugs shall be supplied by the Contractor. 3.1/2C x 150 Sq.mm to 300 Sq.mm.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 4C x 16 Sq.mm to 70 Sq.mm

Laying/rerouting (if necessary) of 11KV PILC/XLPE cable of 3C x 120 -150 Sq.mm.

Dismantling of any damaged structure, platform, cable tray or column related to electrical equipment, including pipe line of A.C etc.

REPLACEMENT/CONNECTION /REPAIR OF 7/8" THICK ACSR CONDUCTOR WIRE LOOP (JUMPERS) / CAPACITORS/INSULATORS/ LIGHTENING ARRESTERS ETCON OVERHEAD STRUCTURE OF 33 KV YARD.

LAYING, STRINGING & TENSIONING OF 33 KV OVERHEAD ACSR CONDUCTOR /EARTHING CONDUCTOR AT 10 TO 12 MTR. POLE HEIGHT

MISC. PREVENTIVE MAINTENANCE /BREAKDOWN REPAIR JOBS OF ISOLATORS AT 4 TO 10 MTR. HEIGHT, BUS BARS, CONNECTION JOINTS/ NUT-BOLTS & SHEET REPLACEMENT/CHANGING OF ACSR WIRE JUMPERS

REPLACEMENT, ADJUSTMENT & REPAIR OF BROKEN OR BENT BRACKET OF 33 KV H-POLES (DP)/TOWERS OF 10 TD 12 MTR. HEIGHT

STRAIGHTENING OF EVENTUALLY BENT 10 TO 12 MTR. HIGH H-POLES (DP)/TOWERS OF 33 KV LINE

FABRICATION & FIXING OF CROSS (X) BRACING/CROSS ARMS & THEIR ASSOCIATED FIXING MATERIALS

FABRICATION, FIXING & ERECTION OF H-POLE (DP) FOR OVERHEAD 33 KV LINE ALONG WITH BRACKETS, INSULATORS ON THE POLE & STAY WIRE ARRANGEMENTS CIVIL JOB RELATED TO POLE ERECTION IS UNDER SCOPE OF CONTRACTOR

FABRICATION OF BRACKETS & THE ASSOCIATED FIXING CLAMPS

FORMATION ,WEARING & ERECTION OF GUARD WIRE BELOW OVERHEAD TRANSMISSION LINE. GUARD WIRE TO BE BRIDGED ALONG SPAN LENGTH BY THREE PARALLEL WIRES & CROSS WIRE OF APPROX. 3MTR. LENGTH AT A DISTANCE OF EVERY 2 MTR

MAITENANCE OF P.T. ( OIL IMMERGED)

OVERHAULING OF 11 KV,VCB

MAINTENANCE OF 33 KV/11 KV TRANSFORMER

MAINTENANCE OF 11 KV/440 V TRANSFORMER

MAINTENANCE OF 33 KV ISOLATORS

MAINTENANCE OF 33 KV BUS-BAR

ON LINE OIL FILTRATION

REPLACEMENT OF H.T. LINK FUSE

REPLACEMENT OF 11 KV CAPACITORS

DISMANTLING AND REPLACEMENT OF OLD DAMAGED T-CLAMP/U CLAMP/BUSBAR CLAMP/CONNECTOR ETC.WITH NEW ONE AND TIGHTENING WITH G.I NUTS , BOLTS & SPRING WASHER ETC.

OUTDOOR/INDOOR TYPE END TERMINATION OF 33 KV GRADE XLPE/PILC CABLE BY HEAT SHRINK JOINTING KIT/M-SEAL TERMINATION KIT, SIZE :3CX 240 TO 300 SQ. MM XLPE/PILC AL.

OPERATION AND MONITORING OF 33 KV BANALOPA SUB-STATION ON PER MONTH BASIS

Operation & monitoring of 33Kv MBR sub station per month basis

REPLACEMENT/NEW-INSTALLATION OF CEILING FANS INCLUDING THEIR CONNECTION IN MOUBHANDAR QUARTERS/OFFICES OF ICC.JOB INCLUDES SHIFTING OF FANS FROM DEPTT AND RETURN OF OLD FAN TO DEPTT

33 KV OVER HEAD LINE PATROLLING , TRIMMING OF TREES BESIDE THE LINE FROM DVC YARD TO MBR 33KV S/S AND SURDA 33 KV O/H LINE. DETAIL AS PER ANNEXURE.

PAINTING OF 33KV STRUCTURES AND POLES. DETAILS AS PER SCOPE OF JOB.

Excavation pit & Grouting of new Street light poles (upto 13mtr height) with concrete. Size of pit: 1.5 mtr depth, 1Mtr width. The detail job as per annexure.

ELECTRICAL WIRING/CABLING. THE DETAIL JOB AS PER ANNEXURE

PAL ENGINEERING ENTERPRISES