Improvement of LIS Majherna in Tehsil Baijnath District Kangra HP Under NABARD

Excavation In foundations, trenches etc., in earth work,lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in alead of 20 metres complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Boulder/stone filling behind retaining wall/ dry hand packed tightly compelete under lean concrete to prevent the entry of surface water complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing laying of brick work using common burnt clay 2nd Class building bricks in supper structurs avobe plinth level upto floor two level in cement mortar 1:6 (1 cement :6 sand) including complete curing complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing and fixing of fencing panel of size 1.80 x 1.20 metres of Jali 25x25 milimetre mesh welded to mild steel black tube 32 milimetre dia of 14 gauge with mild steel flat cover 20 x3 milimetre welded all arround the pipe panel on both sides and providing hold fast 7 Nos. of Mild steel flate 32 x 5 milimetre thickness having consting of tee of size 15 x 15 cms tee acting as hold fasts including cutting, welding, painting with red oxide paint material should be ISI Marked make of TATA /Jindal complete in all respect and to the entier stisfaction of Engineer-in-charge within all leads and lifts.

Providing and Fixing of MS Gate complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .