SPECIAL REPAIR TO BIRD PROOFING NETS IN HANGERS, SUN SHELTERS AND CERTAIN MISC WORKS AT AF STN JAMNAGAR UNDER GE (AF) JAMNAGAR NO 1

Amount

Demolition of Bricks work of stone/boulder masonary, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified as directed by Engineer in Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified as directed by Engineer in Charge.

S & F for false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement , quartz and celluose and cured with high pressure steam using auto claving process confriming to IS 14862, of size 600mmx600mmx 4mm thick fixed over and including anodised aluminiuum power coated (minimum tickness of power coating 50 micron) snap grid frame work of T section (main & cross member) of size 25mmx25mmx1.5 mm thick in square pattern of grid size 600mmx600mm (i) The aluminium frame work willl supported on side wall with used of aluminium L section of size 25 mmx25mmx1.5mm angle etc. Snap grid shall be supported with hanger of 4mm dia, galvanised iron wire adjusting level fixed to roof slab/ truss etc by means of ceilling cleats made out of galvanised iron flat o sixe 40x3 mm size 60mm long and expension hold fastenets 12.5 mm dia 40 mm long complete all as specified as directed by Engineer in Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement laid over 20mm thick Cement screed bed over 25mm PCC (1:2:4) type B0 (12.5 mm graded aggregate) complete all as specified as directed by Engineer in Charge.

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement as dado and laid over 10mm thick cement backing coat in Cement Mortar 1:3. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed by Engineer in Charge.

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each complete all as specified as directed by Engineer in Charge.

S & F in position anodised aluminium power coated (minimum thickness of power coating 50 mircon) door shutter with frame, partly glazed wirh 5 mm thick tinted glass and partly panelled with 9mm thick perlaminated partical board with both side decorative laminnated including rubber bead, jointing cleat for fixing in position, aluminim door handle 150 mm size, aluminium barrel bolt 200mm size etc including taking down of old frame with shutter of any size complete all as specified as directed by Engineer in Charge. (a) Frame (top & side) section shall of size 101.60x44.75x2.4mm (section No 14021) (b) Vertical members of shutter secction shall be of size 85.00x44.45x2.00mm (section No 19560) (c) Top member of shutter section shall be of size 83.50x44.45x2.00mm ( Section No 19596) (d) Lock rail (middle member) of shutter section shall be of size 150.00x44.45x3.00mm (Section No 19596 9e) Bottom member of shutter section shall be of size 150.00x44.45x3.10mm (section No 19584) (f) Glazing clip for securing glass of shutter shall be of 0.80mm thick (Section No 19370) Note :- Section nos given above are of make jindal, contactor may be use similar section of other make mentioned in Appx 'B'.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified as directed by Engineer in Charge.

Rendering 10mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth (wihout using exra cement) complete all as specified as directed by Engineer in Charge.

M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over and including chalk whiting on plaster surfaces preparatory to distember complete all as specified as directed by Engineer in Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified as directed by Engineer in Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point and depositing where complete all as specified as directed by Engineer in Charge.

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed by Engineer in Charge.

M & L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base, sub floor and paving etc complete all as specified as directed by Engineer in Charge.

M & F for Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete all as specified as directed by Engineer in Charge.

M&L for sand cushioning 25mm thick over hardcore/Concrete surfaces, spread complete all as specified as directed by Engineer in Charge.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or part thereof (upto 1.0 km total distance) beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified as directed by Engineer in Charge.

Taking down old Nylon Net of Bird proofing for Shed/Storage Accn/ Hangers including fittins such as wooden fllets/boadings and refixing in same posiition after cleaning down/washing till dirt and dust free including fixing material such as wooden fillets/boardings, clamps, nut & bolt, washers, wire/nylon rope, etc to make the site bird proof complete all as specified as directed by Engineer- in-charge. Note:- This item shall be executed for the building upto 10 metre height from ground level and quoted rates shall be deemed to include for all necessary arrangement for execution of this item upto 10 meter height.

S & F for Nylon Net for bird proofing for Shed/Storage Accn/ Hangers including fixing material such as wooden fillets/boardings, clamps, nut & bolt, washers, wire/nylon rope, etc to make the site bird proof complete all as specified as directed by Engineer-in-charge complete details as under :- (i) Burst Strength up to 44 pound (ii) Shall meet ISO 1806 protocols (iii) Size of mesh 20 mm x 20 mm. (iv) Thickness 0.071 inch (6 Strand each .012 inch) (v) Quality control :- Filament are Wisted and Knoteed pressure, Strtched and tightened. (vi) Break Strength : 52 lbs/2316 Kg per strand (vii) Chemical Properties : Polyethylene ( a paraffin hydrocarbon, chemically inert, flame retardant and highly resistant to most chemical at temperature. High resistance to acids and alkaloids at all concentration.

S& F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified as directed by Engineer in Charge.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and painting two coats of synthetic enamel paint over a coat or red oxide primer complete all as specified as directed by Engineer in Charge.

Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in modular metal box , modular fittings etc including 1.5 sqmm PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including sutable size modular box, cover plate and repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specifed as directed by Engineer in Charge.

All as per Sl item No 22 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specifed as directed by Engineer in Charge.

Supply and fixing modular Socket, 6A - 2/3 pin combined 2 module complete all as specifed as directed by Engineer in Charge.

Supply and fixing Modular switch 1 way 6A, 1 module complete all as specifed as directed by Engineer in Charge.

M&L for MCB, single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA(type 'B) complete all as specifed as directed by Engineer in Charge.

Supply & Fixing MCB SPN, 240 Volts, 40 Amps breaking capacity 10 KA (type C curve) complete all as specifed as directed by Engineer in Charge.

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specifed as directed by Engineer in Charge.

M&L in sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRI-S PVC 6sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 25 mm dia complete, fixed on walls/ceilings with PVC saddles as per IS including of 6 sqmm FRI-S PVC Copper cable green colour as earth wire connected to earth complete all as specifed as directed by Engineer in Charge.

Supply and fixing LED lights fitting 1 x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed as directed by Engineer in Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specifed as directed by Engineer in Charge.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 4 core complete all as specifed as directed by Engineer in Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, mattioles, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specifed as directed by Engineer in Charge.

Refurning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as specifed as directed by Engineer in Charge.

M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer complete all as specifed as directed by Engineer in Charge. Note: Punned thickness of sand shall be considered for pament 18cm)

Supply & laying ISI marked & conforming to IS-5820-1970 unreinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm in trenches as protection to LT UG cable complete all as specified as directed by Engineer in Charge.

indian construction (BID ID -3407418)

M/s. Ambabhai K patel (BID ID -3408954)

suvidhiconstruction (BID ID -3409435)

RACON CONSTRUCTION (BID ID -3410262)

Honest builders (BID ID -3410005)