SETTING UP SOIL TESTING FACILITIES FOR QUALITY CONTROL LABORATORY KOTTAYAM

Wooden mallet for breaking clods

ENAMEL TRAY - 450 X 300 X 40 MM (18" X 12")

MORTAR AND RUBBER COVERED PESTLE

EVAPORATING BASIN - PORCELAIN DISH - 150 MM DIA

MOISTURE CAN-50MM X 50MM-ALUMINIUM (120 GM)

MOISTURE CAN-75MM X 50MM-ALUMINIUM (230 GM) Moisture Content Tin with Lid. Dia. Ø : 75 mm x Height : 50 mm, Aluminum. Capacity : 230 gm (Approx.)

COMPACTION MOULD 100 mm internal dia x 127.3 mm height, 1000 ml volume complete with collar and base plate, all made of mild steel tie rods of mild steel and wing nuts for clamping.

COMPACTION RAMMER , Light Compaction rammer, light, made of mild steel 2.6 kg weight, 50 mm dia compaction face, 310 mm controlled free vertical fall.

EXTRACTOR FRAME - HYDRAULIC - HAND OPERATED Application : This Extractor Frame is used for taking out soil samples compacted or undisturbed, from 100mm diameter and 150mm diameter cylinder such as core cutters, Proctor moulds, C.B.R. moulds, marshall moulds etc

Density Spoon

Trowel medium 6"

Spatula 8" It shall be made of stainless steel with wooden handle. Size of blade 20 cm long. Width of blade 30 mm approx

MOISTURE CAN-100MM X 100MM-ALUMINIUM (1.050 GM) Moisture Content Tin with Lid. Dia. Ø : 100 mm x Height : 100 mm, Aluminum. Capacity : 1.050 gm (Approx.)

EVAPORATING BASIN -PORCELAIN DISH - 200 MM DIA

GLASS PLATE - 450MM X 450MM X 8 MM

COMPACTION MOULD Compaction mould 150 mm internal dia x 127.3 mm height, 2250 ml volume, complete with collar and base plate all made of mild steel, fixing tie rods of mild steel with wing nuts.

Compaction Rammer 4.9 KG Heavy Compaction rammer, made of mild steel 4.89 kg weigh, 50 mm dia compacting face, 450 mm controlled free vertical fall

Liquid Limit Device- Hand operated with counter The apparatus consists of a brass cup, a crank and cam mechanism, mounted on a rubber base of a specified hardness. A brass pin having a knurled end for easy removal holds the brass cup. The height of fall of the cup can be adjusted by a horizontal lead screw. Fitted with a drop counter to automatically record number of drops of the cup.Supplied complete with: Grooving Tool Type ‘A’ and Gauging Block as per IS: 9259 IS:2720 (Part-V).

Palette Knives two with blade 20 cm long and 3 cm wide for mixing soil and water in the glass plate.

BEAKERS - BOROSILICATE GLASS - LOW FORM ,CAP. ; 500ML

Plastic Limit Apparatus Conforming to IS: 2720 (Part V) The apparatus consists of : i) Glass plate 200 mm x 150 mm x 3 mm thick ii) Porcelain evaporating dish iii) Brass rod 3 mm dia, 100 mm long. iv) Flexible spatula with 80 mm long, 20 mm wide blade. v) Moisture Cans, 12 Nos.

Sand Pouring Cylinder (Small) The apparatus is suitable for field density estimation of fine and medium grained soils, as per IS: 2720 (Part XXVIII). It consists of: i) Sand Pouring Cylinder 115 mm internal dia with conical funnel and shutter. ii) Calibrating Container, 100 mm inner dia and 150 mm deep with flange 50 mm wide. iii) Metal tray 300 mm square x 40 mm deep with a 100 mm dia hole at the centre.

Sand Pouring Cylinder, (Large) The apparatus is suitable for estimation of field density of fine, medium and coarsegrained soils, as per IS : 2720 (part XXVIII) and consists of :- i) Sand Pouring Cylinder, 215 mm internal dia, with conical funnel and shutter. ii) Calibrating container 200 mm inner dia x 250 mm high with 75 mm wide flange. iii) Metal tray 450 mm square x 50 mm deep with a 200 mm dia hole at the centre.

Scraper for sand pouring cylinder

G.I.TRAY - 450 X 450 X 50MM for sand pouring cylinder

G.I.TRAY - 300 X 300 X 50MM (12" X 12" X 2")

STANDARD SAND FOR FIELD DENSITY TEST - BAG OF 25 KG

Hydrometer with Jar As per IS 2720, Part-IV, 1985. Complete with Soil Hydrometer, Hydrometer Jar and Rubber cork.

SPECIFIC GRAVITY BOTTLE - 50 ML. NARROW MOUTH FOR SOIL As per IS:2720 (Part 3), with stopper.

RAPID MOISTURE METER-0 - 25% WITH PRESSURE GAUGE The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 25% X 1% on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls(3 OF 12.5 MM AND 1 OF 25 MM DIA) for thorough mixing. Complete in highly polished wooden carrying case with handle. AS PER IS:2720(PART II) / IS 12175

Sodium hexa meta phosphate 1Kg