WBNADIA/NAB/CMCB/029/2025-26 UNDER 15TH FC

(Page no-12, Item no-1) Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(Page no-32, Item no-29) 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor

Page no-15, Item no-7(i) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

(Page No-197, Item No-15/iii) Applying decorative cement based paint of approved quality after preparing the surface including scrapping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In ground floor. (iii) Two coats

Page no-189, Item no-1(i)(c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary.(Ground floor) [Excluding cost of chipping over concrete surface] B. 15 mm thick plaster in cement sand mortar (1:6).

(Page No-165, Item No-8) Neat cement punning about 1.5 mm thick in wall dado, window, sills, floor, drain etc.

(Page No-78, Item No-10/a) M.S or W.I ornamental grill of approved design joints continuously welded with M.S, W.I Flats and bars of window, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

[Page no-64, Item no-35(A)(a)(i)] Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor, With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m

(Page No-176, Item No-7) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. In ground floor. On steel surface. Two coats

(Page No-176, Item No-8) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. In ground floor. On steel surface Two coats

(Page no-74, Item no-4) Supplying, fitting and fixing Orissa pattern water closet in white glazed chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing) (ii) 530 mm x 410 mm

(Page no-62, Item no-14) Supplying, fitting and fixing cast iron 'P' or 'S' trap conforming to I.S.: 3989/1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface (Painting to be paid separately) (ii) 'P' Trap 9ii) 100 mm dia.

(Page no-75, Item no-9) Supplying, fitting and fixing Foot rest for water closet of size 275 mm x 125 mm with (b) Porcelain of approved make.

Page no-88, Item no-4 Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, ................................tc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. (i) For 10 users A) With Pakur variety. (SAIL/TATA/RINL)

Page no-89, Item no-4 Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer ......................................With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (Other than SAIL/TATA/RINL)

(Non Schedule Item) Construction of 1.25 m X 1.25 m X 0.150 m height tube well platform with 75 mm thick cement concrete (1:3:6). A single B.F. flat soling 1.25 m x 1.25 m including cement concrete with (1:2:4) 75 mm thick and 20 mm thick cement plater (1:6) with 1.5 mm thick neat cement punning on all complete.

Supplying, fitting & fixing 'Display Board' of Marble plate engraved in brick masonry with 3 good quality photograph (Before work, Ongoing work, after Completion of work

Please Enable Macros to View BoQ information