CONSTRUCTION OF ANGANWADI AT NO.110 AT RAVNAGAR, IN T.P.S.NO.39 (LIMBAYAT-UDHANA),IN SOUTH EAST ZONE (LIMBAYAT), SURAT. (3RD ATTEMPT)

Name of work : Proposed Estimate work for Anganwadi No. 110 at TP Scheme No. 39 (Udhna-

Limbayat), Ravnagar, South East Zone (Limbayat).

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

1 mt. Lead & all lift, watering etc.Comp.

(A) Loose or Soft soil Executed With Mechanised Efforts / Machinaries

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal ofthe surplus excavated soil as directed

2 within a lead of 50 M. For following diameter of piles.

250mm dia 9.00 Rmt 326.84

SMC SOR ITEM NO. 94, PG.NO.

Providing and filling rubbles including hand packing and

3 filling interstices with quarry spalls behind abutments and

between returns as directed.

SMC SOR , ITEM NO. 22, PG. NO. 3 16.00 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :(a) foundation & Plinth

(A) Foundation 6.00 C.M. 3005.76

(C) Grade Slab 5.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2

sand:4 graded stone agg. 20 mm nominal size)& curing

comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass

(C) Grade slab 6.00 C.M. 3637.34

SMC SOR, PAGE NO 09 IT NO

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS

6 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS

7 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12550.27

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

(2) Having cross sectional area more than 0.085 sq. mt .up

(3) Having cross sectional area more than 0.12 sq. mt. 5.00 C.M. 9153.32

SMC SOR, PAGE NO 14 DESIGN MIX M20

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8957.39

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq. mt .

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

8 for R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 1787.00 Kg. 76.21

SMC SOR, PAGE NO 1 IT NO

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash

SMC SOR, PAGE NO 2 IT NO 16 16.00 C.M. 4511.97

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

SMC SOR, PAGE NO 1 IT NO 10 196.30 C.M. 130.39

Filling in foundation and plinth with murrum or

11 selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

SMC SOR, PAGE NO 1 IT NO 11 40.10 C.M. 289.06

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for termite

control treatment including labour and material

consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration

12 Weight one percent is recommended i.e. one litre 20 EC 54.00 S.M. 82.89

chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication at the

rate of 5 litre chemical / Sqm of surface is recommended as

SMC SOR, PAGE NO 12 IT NO

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

SMC SOR, PAGE NO 3 IT NO 28 MR 29.80 S.M 324.00

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.) of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly

clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing

14 with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application

of putty is not recommended. Minimum 4-6 hours duration

is required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 MR 29.80 S.M 82.00

TOTAL COST UP TO PLINTH

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS

15 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12550.27

First Floor 0.00 C.M. 12589.87

Terrace Floor 0.00 C.M. 12629.47

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11099.15

First Floor 0.00 C.M. 11138.75

Terrace Floor 0.00 C.M. 11178.35

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 4.00 C.M. 9153.32

First Floor 4.00 C.M. 9192.92

Terrace Floor 2.70 C.M. 9232.52

(SOR SMC Pg No. 14 Design Mix M20)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8957.39

First Floor 0.00 C.M. 8996.99

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 0.00 C.M. 8038.38

First Floor 0.00 C.M. 8077.98

Terrace Floor 0.00 C.M. 8117.58

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 8.10 C.M. 6961.62

First Floor 8.10 C.M. 7001.22

Terrace Floor 2.50 C.M. 7040.82

(SOR SMC Pg No. 14 Design Mix M20)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7850.27

First Floor 0.00 C.M. 7889.87

Terrace Floor 0.00 C.M. 7929.47

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7268.63

First Floor 0.00 C.M. 7308.23

(4) Having more than 13 cm. Thickness

Ground Floor 6.50 C.M. 6690.46

First Floor 6.50 C.M. 6730.06

Terrace Floor 1.60 C.M. 6769.66

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.60 C.M. 9381.78

First Floor 0.80 C.M. 9421.38

Terrace Floor 0.12 C.M. 9460.98

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.90 C.M. 6875.78

First Floor 0.90 C.M. 6915.38

Terrace Floor 0.20 C.M. 6954.98

(SOR SMC Pg No. 14 Design Mix M20)

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

16 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97) 2.74 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M20 Design mix concrete as per IS

17 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(F) Stair cases including landing etc.

Ground Floor 2.30 C.M. 7062.46

First Floor 2.30 C.M. 7102.06

(G) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9275.80

First Floor 0.00 C.M. 9315.40

(SOR SMC Pg No. 14 Design Mix M20)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

18 for R.C.C. work incl. bending, binding & placing in position

Ground Floor 3160.00 Kg 76.21

First Floor 3174.00 Kg 77.21

Terrace Floor 1262.00 Kg 78.21

(SOR SMC Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash

Ground Floor 17.00 C.M. 4511.97

First Floor 17.00 C.M. 4786.95

Terrace Floor 8.00 C.M. 5061.92

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

20 Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 94.00 S.M. 678.86

First Floor 94.00 S.M. 685.11

Terrace Floor 13.00 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for

plastering & finished even & smooth with a floating coat of

21 cement slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement :

3sand) (A) For wall and similar surfaces.

Ground Floor 233.00 S.M 237.51

First Floor 236.00 S.M 265.65

Terrace Floor 52.00 S.M 293.79

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

22 slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

(B) for ceilings and soffits of stairs

Ground Floor 66.00 S.M 214.60

First Floor 66.00 S.M 242.74

Terrace Floor 13.00 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick work

and RCC work or two dissimilar surfaces, at all heights

23 fixed by nails, rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 15.00 S.M. 102.00

First Floor 16.00 S.M. 102.00

Terrace Floor 4.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand)

apply thick cement slurry and apply roller horizontal as

well as vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

Ground Floor 106.00 S.M 324.00

First Floor 106.00 S.M 324.00

Terrace Floor 149.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to

R.C.C. chajja etc. comp.. For all floor

Ground Floor 23.50 R.M 41.66

First Floor 23.50 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

Ground Floor 23.00 R.M 50.00

First Floor 23.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24"

x 24" in flooring treads of steps and landing laid on a

27 bed of 12mm thick cement mortar 1:3 (1 cement :

coarse sand) finishing with flush pointing in white cement.

Ground Floor 0.00 S.M 1040.35

First Floor 0.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24"

x 24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

Ground Floor 63.00 S.M 1081.71

First Floor 63.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement :

Coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

comp.Size 24" x 24" For Antiskid tiles

Ground Floor 8.50 S.M 1397.83

First Floor 8.50 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

30 coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 45.00 S.M 989.45

First Floor 44.00 S.M 989.45

Terrace Floor 4.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse

31 sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete.

Ground Floor 15.00 S.M 1076.94

First Floor 14.00 S.M 1076.94

Terrace Floor 0.60 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone

cooking platform 0.6 mt. wide & 0.75 mt. height,

including one end side granite stone (Double Polish) of

1.25 mt. height & front granite stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M. 1:4 and

32 10mm th. plaster in 1:3 with finishing smooth with

cement slurry as required and Stainless Steel sink of

mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors. (Basic rate of Granite

Ground Floor 3.50 R.M. 3128.00

First Floor 3.50 R.M. 3128.00

Terrace Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by

Engineer in charge etc. comp..

All Floor 7.20 C.M 500.00

(SMC SOR,Pg No.6, It No. 61)

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing 35mm.th. Indian teak wood shutters

for doors, windows & clearstory windows incl. Indian

teak wood frames of finished size 12cm x 7cm.incl.

anodized aluminum fixtures & fastenings incl. Primer coat

of approved quality & two coats of oil painting etc. For all

(A) Fully Panelled 6.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP FRAME size 125 x 65 mm and

35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement

on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ along with embedded wooden pieces for

35 stiffening & also taking hinges & fixtures. The whole FRP

frame & shutter is to be water proof weather

proof,termite proof &resistance to mild acid/alkali.

Rates are to be inclusive of S.S.hinges with fastener sleeve &

alluminium fixtures & fastentings.

(A)'Same as Above But Without Frame 8.00 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double

Core type Both Face water proof Ply Vennered &

mm th.laminate shall be pasted on both side with adhesives

as specified by the manufacturers. The laminate shall be as

36 per approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 17.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size

mm x 31.75 mm x 1.20 mm (of jindal section no:8687,

@ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

0.659 kg/mt) with sliding shutters of horizontal member

size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949,

37 @ Wt. of .456 Kg/mt) vertical member of size 40 mm x

mm x 1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm

thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

(A) Same as above but colour anodized 6.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A)

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 95 mm x

24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of

0.738 Kg/mt), horizontal Three track member size

mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

mm x 1.50 mm (of jindal section no:8933, @ Wt.

Kg/mt) with sliding shutters of horizontal member size

38 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of

0.456 kg/mt), vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt)

with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per

(A) Same as above but colour anodized 10.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A)

Providing and fixing standared extruded of aluminium

section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc. complete for fix

window 0.00 S.M 2336.00

A) Same as above but Colour anodized 2.00 S.M 2336.00

SMC SOR Alluminium Work ITEM NO.5A MR

Providing & laying granite slab 18mm thick in Window-

Door seal Frame Etc laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) with nessary adhesive

40 material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:-

For all Floors. 46.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

Labour Charges For Edge Finished For Granite for all floors

For all Floors. 404.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp.

(A) Plain grill For all Floors 989.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

43 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters

For all Floors 50.00 S.M 65.31

SMC SOR, COLOUR IT.No. 8, Pg No.15

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners

44 stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as

per approval of Engineer-incharge, (for payment purpose

only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners

SMC SOR, PAGE NO 11 ITEM NO 120, MR 236.00 Kg. 450.00

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

45 prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test

as directed. (M.R.)

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations. (a) Applying and grouting a slurry coat

of neat cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface

before tratment.(b) Laying cement concrete using broken

bricks/brick bats 25 mm to 100 mm size with 50% of cement

mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with

false chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other

adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as

mm.(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and for

final test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order and

as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 75.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing and laying broken china mosaic flooring for

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and

extending them upto 15 cm along the wall clearing with

water and oxalic acid etc. as directed.

SMC SOR, PAGE NO 12 IT NO 131 75.00 S.M 747.29

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to

47 give an even shade including thoroughly brushing the

surface free from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 521.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 145.00 S.M 40.59

SMC SOR, COLOUR IT.No. 4, Pg No.15

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 521.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 145.00 S.M 79.39

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly

clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing

49 with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application

of putty is not recommended. Minimum 4-6 hours duration

is required between each coat of weather shield max paint

For all Floors 361.00 S.M 82.00

SMC SOR, colour works,Pg No.16,item no.-17

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

50 mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete.

(Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 0.00 S.M 2410.00

SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:-

SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R. 0.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs

52 curing, layig including painting the exposed portion of

loops, all as per standard design complete.

For all Floors. 15.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists

53 channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like.

For all Floors. 5.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel shutters

with vertical channels 20 x10 x 2 mm. Braced with flat

iron diagonals 20 x5mm size with top & bottom rails of T-

54 iron 40x40x6mm. with 38mm dia. steel pulleys comp. with

bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 6.50 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

55 with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 0.00 S.M 1050.00

56 Wall Vinyl Sticker 22.00 SqFt. 28.00

SMC SOR, PAGE NO.14,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100

SMC SOR, PAGE NO.14,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.14,IT NO 148 (MR)

59 5mm PVC sheet Eco Vinyl (Any size) 22.00 SqFt. 55.46

SMC SOR, PAGE NO.14,IT NO 149 (MR)

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Decorative theme base designing & painting with all

waterproof materials

SMC SOR, PAGE NO.14,IT NO 150 (MR)

fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled

with Co2 Gas as per IS 15222 with controll discharge

61 mechanis, fitted with Hose & Horn applicable on Class B fire 8.00 Nos 4200.00

rating 21B confirms to IS 15683 bearing ISI mark. Co2

cylinder as per IS

SMC SOR, PAGE NO.12,IT NO 136 (MR)

Supplying & erecting ABC powder type 'Ceasefire' type

62 Fire extinguisher as per IS 4308 with necessary clamp for 8.00 Nos 2000.00

erection on wall.6 Kg Capacity

SMC SOR, PAGE NO.12,IT NO 135 (MR)

Supplying FIRE bucket round bottom of 9 litres

capacity made out of 24 gauge G.I. sheet with extra handle

at bottom duly painted white inside and Red out side with

FIRE mark, filled with dry-sand and kept on existing

stand provided or hung on wall hook.

SMC SOR, PAGE NO.12,IT NO 137 (MR)

Supplying and erecting floor mounting stand for keeping

four nos. of FIRE buckets comprising 1500mm in lenght,

900mm height frame made out of 30mm x 30mm x 4mm

64 angle from with cross supports for legs, welded with 4 4.00 Nos 903.00

hooks and duly painted with one coat of red lead and two

coats of approved enamelled silver paint.

SMC SOR, PAGE NO.12,IT NO 138 (MR)

TOTAL COST OF SUPER STRUCTURE

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Water Supply & Sanitation

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

100 mm size "P'or "S" trap for water closet squatting pan

joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware

C0117CS/C0117*,Jaquar,HindWare

For all Floors. 4.00 Nos. 3275.00

SMC sor- Sanitary Items,Page no22,It No.

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap with normal closing

66 seat cover L bend ncluding jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278,HindWare sleek 20011, Jaquar- CNS-WHT- 4.00 Nos 3282.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing plastic seat and cover for wash down

67 water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover.

For all Floors. 4.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

68 M.S. Brackets painted white incl. cutting holes & making

good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

SMC sor- Sanitary Items,Page no21,It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet

69 or plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 4.00 Nos 833.73

SMC sor Page no7 It No.

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N 4.00 Nos 1423.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB 10.00 NO 1323.00

SMC sor Sanitary Items,Page no21,It No.

Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare F280052 4.00 NO 2110.00

& CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no21,It No.

Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

73 nuts, washer and brass flange complete, including cutting

and making good the wall where required.

Make- Cera, Parry ware,HindWare

For all Floors. 4.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 4.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish

75 of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 4.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 110x110 mm diameter with jali of the following

76 nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and

making good the walls.

All floor 10.00 Nos 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS

no. 13592 (Type "B") of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make for soil and waste discharge system at

all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc.

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no.

13592 (Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/

Finolex make for rain water at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.)

SMC sor ,Page no 8, It No. 85 M.R.

Providing & Fixing in position PVC Cowl vent to pipes of

79 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC

drainage pipes for concealing with cement plaster 20 mm

80 avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing

as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 41.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 61.00 R.M 180.00

SMC sor- Page no 8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make including fittings make or equivalent

as approved by angineer-in-charge. Pipe shall be fixed on

81 the wall the help of clamp at every two meter C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

SMC sor Page no 8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including cost

of cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing & fixing Z - clamps at all floor levels of approved

84 design to C.I. S.C.I. or PVC pipes including the cost of cutting

holes & making good the wall etc.

(B) 75 to 90 mm Dia 7.00 NO 75.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing & Fixing gun metal check or non return full

85 way wheel valve at all floors levels, etc. complete.

SMC sor Page no 8,It No.

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & Fixing abonite ball cock of approved qualities

directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering & laying joining R.C.C. NP2 CLASS

87 Pipe In C.M. 1:1 of following nominal internal diameters

incl. Testing of pipes and joints etc. Comp.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 20-21, Page no1 It No.1

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5)chamber & water tight C.I. cover with

frame of 300mmx300mm size (inside) with weight includ.

plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 100mm x 100mm Size -

SMC sor,Page no 7, It No. 73 4.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside

89 to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 0.00 No. 3155.63

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th'

B.B. Masonary in C.M 1:5 with cement plaster 15 mm th'

in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab

with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

90 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover 0.00 No. 2932.93

with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

SMC sor - Page no7,It No.76

Providing and fixing C.I. manhole cover 0.60 mt. x

91 mt. size having weight not less than 35 kg. etc. complete.

SMC sor- Page no.8, It No. 83 6.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia

and 30 cm Length

SMC sor- Page no 6 It No. 64 0.00 NO 101.91

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL 60001 0.00 NO 2476.00

SMC SOR- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

94 with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 0.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C.

work incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom

slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm

th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

95 outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of

tank curing etc. comp. incl. Locking arrangement, outlet,

inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as

per structural drawing excluding Steel & as directed by

Engineer in-charge

Under Ground water Tank 10000.00 Lit 5.46

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels,

in flooring, treads of steps & landings laid on a bed of

mm. Av. Th.C.M.1:3(1cement :3 sand) finished with flush

pointing in white cement etc.com. For all floors

Under Ground water Tank 11.50 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th.

C.M.1:3(1cement :3 sand) including necessary cement paste

for fixing and joined with white cement slurry etc. complete.

Under Ground water Tank 29.00 SM 887.64

SMC SOR, Page no4, It No.35

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

98 for R.C.C. work incl. bending, binding & placing in position

etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 800.00 Kg. 76.21

SR. DTS SOR RATE-

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex / Super /

Reno PVC (ISI) mark water tank of required capacity each

with all necessary fittings & connection etc. complete on

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

final Tp 39 Aanganwadi -110

ABSTRACT SHEET-(2023-2024)

SOR 2023-24 & MR

Sr. Description of Work/ Item Qty. Estimated Total

No. Rates WITH Amount

Part-01 Point wiring in Copper (MODULAR)

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling 20.00 Pt. 471.83

Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade ZHFR PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III 12.00 Pt. 660.55

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

3 1-2-3. complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III 10.00 Pt. 496.99

Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on

4 1-2-3. surface of wall / ceiling complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with

following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III 5.00 Pt. 732.46

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories

Cat. III 5.00 Pt. 240.51

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 KV grade ZHFR PVC

insulated multi strand copper wires erected in below

type of pipe with 6A Modular type switches and

6 1-2-5. following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling

rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III 2.00 Pt. 586.86

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

Cat.III 0.00 Ea. 152.35

8 1-2-6. (4) TV Co-axial Socket outlet Cat.III 1.00 Ea. 152.35

(22) 16/20/25 Amp. Modular Starter for Motor / A.C.

Unit Complete Cat.III

Conduits & Pipes

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (1)

Supplying & erecting UPVC Mini trunking (PVC

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not below

12 1-3-5. 12.5 mm in height as per IS with accessories of 0.00 Mtr. 29.10

PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of

following size .(2) 25 mm

Mains with 1.1 KV grade ZHFR PVC insulated ISI

marked stranded Copper conductor wire in following

13 1-4-1. type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

ZHFR PVC insulated stranded wire of green colour

for earth continuity of following size

(C) With oval conduit /PVC casing capping double

(a) 2 wire 1.5 sq. mm 50.00 Mtr. 55.72

(b) 2 wire 2.5 sq. mm (From LDB to SB and SB to

Mains with 1.1 KV grade ZHFR PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

15 1-4-2. 2.5 sq. mm copper conductor ZHFR PVC insulated

stranded wire of green colour for earth continuity of

following size (C) with oval conduit /PVC casing

capping double lock type

1-6-12. Decorative call bell Ting-tong box type 250 volts

complete erected

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

(B) 4 core 25 Sq. mm 0.00 Mtr. 187.44

(C) 4 core 35 Sq. mm 0.00 Mtr. 251.64

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

17 4-5-8. material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia 0.00 Mtr. 61.62

(B)63mm outer dia 0.00 Mtr. 72.75

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

18 4-4-4. conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm 0.00 Mtr. 506.71

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

Providing and erecting Street Light pole bracket comprising main

B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

19 6-5-2-b fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr 1 Ea. 683.03

Supplying & erecting approved make street light

box comprising CNC Processed robust housing

made from single sheet multi folded with high

6-4-4. grade powder coating ( RAL-7032 Structure 1 Ea. 834.53

finish as Standard) of IP-55 degree of Protection

Gasket(PU Gasketing) of following size of Box.

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

2-16-1. embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(ii) 15 to 24 Watts 1 Ea. 1805.00

Subtotal Part-01

Part-02 LT Switchgear, Distribution Boards & LT Panel

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP

Cat. III 1.00 Ea. 2233.98

Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed.

(ii) 40Amps. FP

Cat. III 0.00 Ea. 2636.27

(iii) 63 Amps. FP Cat. III 0.00 Ea. 3038.55

Supplying & erecting approved make RCCB +

MCB (Electro magnetic type only) working on

residual current device having 10 KA short

circuit breaking capacity and 30 mAmp.

Sensitivity & 30 mili sec. tripping time

conforming to IS 12640 test knob facility trip free

mechanism operating for rated leakage at

nominal ten volt, complete erected including all

materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

18 3-11-5. rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI)

(b) sheet steel double door

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

19 3-10-1.(B) A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Cat III 6.00 Ea. 111.27

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity

sheets Steel powder coated enclosure suitable for

incorporating One/Two nos. MCB

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

Cat-lll 0.00 Ea. 2610.59

Cat-lll 0.00 Ea. 4784.66

Subtotal Part-02

Part-03 Indoor Lighting Item

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(iii) 10 to 15 watts Cat-III 5.00 Ea. 188.30

(B) LED Panel Light with provision for Plane

24 2-15-3 front frame with translucent cover fixed to

housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV 0.00 Ea. 1794.03

Subtotal Part-03

Part-04 Fan & Accessories

Supply, Installation, Testing and Commissioning of

suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit

with earthing provision, copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM,

24 5-1-7. RPM,230v (tolerance as per IS : 374-2019), THD <

10%, with remote unit for Speed Control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection ,

Hz, Single phase AC Supply, earthing etc. Complete

as required.[ Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leckage and earthing.

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm

26 5-2-3. length each side and pierced through a 16 Gauge 12.00 Ea. 106.99

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

27 5-3-4. mounted low noise operation suitable for medium

duty having following dia size and maximum speed in

[A] 305 mm dia 900 RPM Cat.II 6.00 Ea. 2054.23

Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box.

Subtotal Part-04

Part-05 Earthing System

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc. using

Providing and erecting Annealed bare Copper wire

Providing and erecting HOT deep Galvanised iron

strip wire 8 to 16 SWG.

Providing and erecting Pipe type earthing with 40 mm

dia 2.5 mtr long 'B' grade G.I. pipe with necessary

26 3-14-6-B coupling buch buried in specially prepared earth pit & 1.0 Ea. 821.69

G.I. earth wire of 8 SWG erected & connected as

directed (For panel)

For using salt and charcoal / coke as required for pipe

Supplying & erecting funnel type earthing having

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with

following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 1 Ea. 2311.01

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

29 3-14-9 dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report

must be submitted.

(b)For Electrical installation up to 11 KV in normal

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e 0.00 Ea. 8634.64

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Subtotal Part-05 0

Part-06 Water Cooler & Purifier

8-13-1. Providing and erecting water cooler having

storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C

within a hour, The water cooler should be

comprising of hermetically sealed compressor, Ea.

fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be

made from Stainless Steel. ◦

SMC (66) SITC of Water Purifire Eureka Forbs Make AG

(MR) or Equivalent

Subtotal Part-06 0

Part-07 Motor, Pumps & Starter

Providing & erecting open well horizontal mono

block pump set with cast iron body, complete for

three phase submersible motor having

(B) 0.75 H.P. single phase open well motor

pump set having discharge of 170 LPM @

mtr. head suitable for 25 mm dia delivery pipe

with control panel

Supplying and erecting Direct - On - Line Starter

with 18 A. rating contactor and with 3.5 Amp.

18A range directly operated in totally insulated

2 9-1-1 elegant enclosure for single phase operation up 1.00 Ea. 2080.00

to 3 HP as per IS 13947 complete erected on

P.W. Block with necessary connection.

Supplying & erecting approved make Automatic

liquid level controller 6A. with sensor testing as

per instruction of Engineer in charge on site

complete with wiring connection with existing

wires , with copper conductor from pump to

upper and lower tank.

Subtotal Part-07

Subtotal of All Items

Total Amount Of Electrical

Total Amount Of Electrical

Total Amount Of Civil Work

Total Amount Of Civil Work

Total amount of Tender

Total amount of Tender