SPECIAL REPAIR TO BLDG NO PRR-206 (OR LIVING) AND T-21 (JCOs MESS) OF 787 (I) AD BDE UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Dismantling CGI (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S& F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item no 3 above but fix in valley gutter / ridge,plain/corrugated.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A)

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cm in width and setting in cement morter 1:6 complete all as specified and ditected by Engr-in-Charge.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

M & L for Preparation of Old previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for preparation of surfaces of Old plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

Taking down Chowkat/frame exc 1.5 sq.m & n.exc 4 sq.m including removing to store,complete all as specified.

Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each and removing to store,complete all as specified.

Taking down Chowkat/frame n.exc 1.5 sq.m including removing to store,complete all as specified.

S&F plain solid straight chowkat and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint in 2ND class hard wood,complete all as specified.

S&F Glazed and skeleton shutter 35 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified.

S&F plain framed paneled shutter 32 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S & F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed, complete all as specified

S & F Extruded Aluminium alloy handles, fabricated type, anodised 150 mm size, complete all as specified

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified

S & F 125 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

S&F Anodised aluminium window and ventilator shutters (three shutters), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.

M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick etc.,complete all as specified.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M& L Chequared Cement Concrete Tiles 300 x 300 MM thick set and jointed in cement slurry and pointed in neat grey cement & reflective coloured over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, complete all as specified.

M & L for taking out old water proofing treatment from roof including cement screed bed and applying water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge :- (b) The roof surface shall be thoroughly wire brushed cleaned to eliminate all sharp projection, washed, dried up and cleaned of all foreign material and dust to receive primer. (c) On the dried plastered surface, one coat of approved bituminious primer @ 0.25 Kg/Sqm shall be applied. (d) On this primered surface, APP modified bituminous membrane with non woven polyster mat reinforcement weighing not less than 3 Kg/Sqm with plain finish shall be laid by torch application method (e) The overlap while torching shall be 100mm on transverse direction and 75mm on longitudinal direction. (f) Top surface shall be applied with bituminious aluminium paint (g) The treatment shall be carried as per manufacturer’s instructions and removal and roughening of existing treatment if any may be done before application of above as directed by Engineer-in-charge. (for Six Esh shed only)

M & L for Rendering 10mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement

S & F in repairs 15 mm bib taps fancy type long shank cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified

M&L 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base

Demolition of cement concrete (reinforced) as in Slab, rack etc

M&L for providing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in slabs. complete all as directed by Engr-in-charge.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel deformed bars 6 to 8mm dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all as specified and directed.

Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

S & F in repair Ball brass valve, high pressure, with polythene float horizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 15 mm bore complete all as specified and as directed.

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.

M&L Two coat of synthetic enamel paint on New steel surfaces over 10 cm width or girth incl prepration of surfaces complete.

M&L for preparation of old painted surfaces of Steel and Steel materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified by Engr-in-Charge.

S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing M&L 9mm thick Acoustical board/tiles for insulation and accoustic purposes, (60x60) cm in size, fixed in celing with screws to frame work or with staples on snap grid, hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specied and as directed.

M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 61 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing new plastered surfaces & applying two coats of Oil bond Distemper on walls. complete all as specified and directed.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

E/M PART

Taking down old point wiring and M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws :-

One light point controlled by one switch

One fan point controlled by one switch & regulators

One socket 5 pin 5 Amps flush type on independent board

One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC Boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing.

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

supply and fix in repair MCB DB TPN sheet enclosure double door Vertical type suitable for mounting MCB with 415 volts with 200 Amps rated busbar 12 way

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

supply and fix in repair isolator TPN 40 Amps 415 volts

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply & fixing in replacement of LED Slim Surface mounted down luminair 18 watts Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination complete with electronic driver , size 200x23 mm all as specified. Cat no D641865 of wipro or eq in Havells/Bajaj/Crompton

Supply & fixing in replacement of LED Recess mounted/POP mounted down luminair 20 watts Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for grid ceiling complete with electronic driver suitable for ceiling cut size 220x220x32 mm all as specified. Cat no 20W6500K of wipro or eq in Havells/Bajaj/Crompton

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair wall mounted decoration lights ,18 watts including driling of wall ,fitting of light on the wall with necessary accessories all as specified and directed by engr in charge . Make :-Make:- Philips/Havells/Bajaj

S&F in repair Supply and fixing LED street light fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : ENDURAPEARLS35WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make :- Havells/Bajaj/Crompton.

Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge.

16 sqmm x 2 core

16 sqmm x 4.0 core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Soft / loose soil

Hard dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

50 mm dia

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

H S TAKHI

AVS CONSTRUCTION

DR J S CHADHA AND SONS

M/S K.D.MATE

Ganesh Sonajirao Garje

Shri Sant Cosntruction

M/S B.A. GAIKWAD