Building Work

Name Of Work :- Construction of 2 Boys & 1 Girls Toilet Block along with Drinking Facility At ITI Bilimora Dist:

: : BILL OF QUANTITIES : :

Item Description Quantities Unit Item Rates Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 573.70 Cum. 120.00

stacking of useful materials and disposing off the excavated stuff as directed

upto 50 Meter lead (A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 579.30 Cum. 133.04

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

3 Providing and laying cement concrete work 1:2:4 (1-Cement : 2- Coarse sand 23.30 Cum. 3989.03

: 4- graded stone aggregates 20mm nominal size) and curing complete

excluding cost of formwork and reinforcement for reinforced concrete work

4 Providing and laying controlled cement concrete M.150 and curing complete 39.60 Cum. 5232.81

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Plinth Slabs

5 Brick work using common Brunt clay building bricks having crushing 101.00 Cum. 4121.54

strength not less than 35 Kg./ Sq.cm. in foundation and plinth in cement

mortar 1:6 (1 cement: 6 fine sand) (b) Conventional.

6 Providing and laying controlled cement concrete M.200 and curing complete 30.00 Cum. 4546.01

including the cost of formwork but excluding reinforcement for reinforced

concrete work in (A) Foundations, footings, and Mass concrete.

7 Providing and laying controlled cement concrete M-200 and curing complete 34.90 Cum. 6281.19

Including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in : for Beams

8 Brick work using common Brunt clay building bricks having crushing 76.80 Cum. 4403.39

strength not less than 35 Kg./ Sq.cm. in foundation and plinth in cement

mortar 1:6 (1 cement: 6 fine sand) (b) Conventional. For Ground Floor

9 Half brick masonry in common brunt clay building bricks having crushing 70.20 Sqm. 734.29

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three

course embedded in Cement Mortar (B) Conventional. For Ground Floor

10 Providing and laying controlled cement concrete M-200 and curing etc. 4.40 Cum. 6871.03

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintal for Ground floor

11 Providing and laying controlled cement concrete M-200 and curing complete 16.50 Cum. 8974.86

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (d) columns

Item Description Quantities Unit Item Rates Amount

12 Providing and laying controlled cement concrete M-200 and curing complete 1.70 Cum. 6640.75

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for Ground floor

13 Providing and laying controlled cement concrete M.200 and curing complete 21.20 Cum. 6619.54

including the cost of formwork and excluding reinforcement for reinforced

concrete work in (C) Ground floor Slab

14 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 212.80 Cum. 133.65

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

15 Filling in foundation and plinth with murrum or selected soil in layers of 33.50 Cum. 296.29

20cm. thickness including watering, ramming and consolidating etc.

16 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 16063.00 Kg. 77.28

binding and placing in position complete upto floor two level

17 20mm thick sand faced cement plaster on walls upto height 10 metres above 491.50 Sqm. 339.14

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

18 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of 435.50 Sqm. 198.91

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

19 Applying two coats of putty & two coats of primer of approved brand and 186.50 Sqm. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

20 Wall painting (two coats) with plastic emulsion paint of approved brand and 186.50 Sqm. 81.05

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

21 Providing and fixing mirror polished 18 mm thick Black Granite stone with 76.60 Sqm. 2025.05

full round edge and polished of approved quality in clading on sill and around

the doors/ windows/ ventilation with 12 mm thick cement mortor CM (1:4)

and fixing with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

22 Providing and laying Matt Finished Antiskid Ceramic (300mm X 300mm) 26.70 Sqm. 1258.46

tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in jointed with Epoxy Grouting.

Item Description Quantities Unit Item Rates Amount

23 Providing and laying coloured glazed tiles of the size 300 mm x 600 mm x 8 344.20 Sqm. 1477.24

mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement slurry

24 P & L 24" x 24" Matt antiskit Porcelain 8 mm thick tile flooring over 20 mm 113.80 Sqm. 1053.31

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with Epoxy Grouting including

finised with flush pointing & cleaning the surface etc. complete for Matt

antiskid Porcelain.

25 Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR 32.20 Sqm. 2038.18

SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness

and size of 19mm x 19mm for stiles and 15mm x 15 mm for top and bottom

rails. M.S. frame shall have a coat of steel primers of approved make and

manufacture, M.S. frame shall be covered with 5 mm thick heat moulded PVC

‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC

sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x

2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom

rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together with solvent cement adhesive,.

An additional 5mm thick PVC strip of 20mm width is to be stculk on the

interior side of the ‘c’ channel using PVC solvent cement adhesive with 2 nos

15cm long stainless steel handle,1 Nos S.S. Stopper 20 Cm long of ASIS 304,

nos S.S. Aldrop 20 Cm long of ASIS 304 Grade, 3 nos S.S Hinges and

necessary fixtures & fastenings etc. complete as per direction of Engineer in

26 Finishing wall with weather proof exterior emulsion paint on wall surface 491.50 Sqm. 117.40

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc

27 Providing and fixing Ventilation of standard extruded anodised Alluminium 14.50 Sqm. 2330.35

section of size 65 X 25 X 1.25 mm of section no 14031@ Wt 0.59 kg/Rmt

with colour anodized alluminium fame with 3 mm thick Bajari figured glass

with adjustable louvers of standard (I.S.) and The ventilator shall be

provided with an integral aluminium frame/opening suitable for fixing an

exhaust fan of the specified size as shown in the drawings make as per detail

given in elevation etc complete as per instruction of Engineer in charge &

28 Providing and fixing water closet squatting orissa type W.c. pan size 580mm 7.00 Nos 1390.30

integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass

flush valve and GI inle connection etc. comp. (A) Vitreous china long pattern

white or color.

29 Providing and fixing wash down water closet (European wc .pan) with 11.00 Nos 2613.57

integral "P" or "S" trap and PVC flushing cistern with a pair of C.LI. Or Mild

steel Brackets, complete with fittings such as lead value siphon, 15 mm.

Nominal size brass ball valve with polythene float, C.P. Brass handle unions

and couplings for connections with inlet, outlet and overflow pipes, 40 mm.

dia. flush bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc comp incl plastic sheet

cover including jointing trap with pipe in cm 1:1 & Jet spray heavy duty with

S.S. Braided hose 60 cm long (a) Vitreous china in white or color

Item Description Quantities Unit Item Rates Amount

30 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 150.00 Rmt 72.64

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials

31 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 150.00 Rmt 91.83

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials

32 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 285.00 Rmt 195.66

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials

33 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 150.00 Rmt 857.65

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

34 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 150.00 Rmt 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

35 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 13.00 Nos 1819.76

brackets painted white including sutting holes and making good the same but

excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x

400mm size. (i) In white colour With C.P. brass waste for washbasin or sink.

(A) 32mmdia and chromium plated, bottle trap with necessary couplings of

approved quality for wash basin.

36 Providing and fixing Gun metal check or non return fullway wheel valve.(A) 25.00 Nos 186.82

37 Providing and fixing chromium plated brass half turn flush cock of approved 53.00 Nos 263.77

quality including fixing in pipe line etc. complete.(ii) 25mm dia.

38 Providing and fixing screw down bib taps of following size.(B) Brass 24.00 Nos 186.82

chromium plated screws down Bib Tap. (i) 15mm dia.

39 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25.00 Nos 420.63

Item Description Quantities Unit Item Rates Amount

40 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 25.00 Nos 585.36

diameter with jali of the following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

41 Providing & Fixing S.W. Gully trap with C.I. Grating brick masonay chamber 3.00 Nos 1246.91

and water tight C..I Cover with frame of 300 mm X 300 mm Size ( Indian )

with standard weight (i) Square mouth traps (C) 150 mm x100 mm size P or

42 Providing & Fixing CP brass screw down/Half turn stop cock of approved 15.00 Nos 186.82

quality of 15mm dia.size with adjustable wall flange.

43 Providing erecting and fixing double coated ISI water tank of required 15000.00 Liter 3.94

capacity each with all necessary fittings and connection etc. complete on

44 Constructing brick masonry chamber for underground C.I. Inspection 9.00 Nos 3660.75

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe

line with one or two inlets.

45 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 13.00 Nos 851.12

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

46 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at 5.70 Sqm. 3093.41

top and 30 mm thick Kota stone slab flooring fitting at bottom with

cementing Materials / adhsives including macking necessary grooves in

walls with Vertical Kotastone 30 mm x 2 No sandwitch thick every 60 cm

centre to cenre including all labour material of approved quality incl. full

moulded round front edge fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete .

47 Providing and Fixing Name/Number Plate in 4 mm thick Acrylic sheet 3.00 Nos 954.45

Sticked,writing and screw fitting as directed by Engineer in Charge.

48 Providing and fixing heavy-duty anti-skid rubber floor mat of approved 12.30 Sqm. 606.00

make, 8–12 mm thick, manufactured from high-quality natural/synthetic

rubber with anti-slip textured surface and non-slip backing, suitable for wet

areas such as toilets and bathrooms completing the work in all respects as

directed by the Engineer-in-Charge.

49 Providing and developing flower bed of approved shape and dimensions by 12.90 Sqm. 1755.38

removing all debris, rubbish and unsuitable material, filling with good quality

fertile garden soil mixed with well-decomposed farmyard manure (FYM),

river sand and organic compost in the required proportion, dressing, leveling

and watering the bed, including supplying and planting approved seasonal

flowering plants/shrubs at the specified spacing, applying manure/fertilizer,

and carrying out all necessary horticultural operations to ensure healthy

growth of plants, complete with all labour, materials, tools, equipment,

transportation and incidental charges, as directed by the Engineer-in-Charge.

Item Description Quantities Unit Item Rates Amount

50 Providing and fixing Urinal or approved quality including conecting the 28.00 Nos 1130.08

Urinal with waste pipe , tap etc. (A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm And C.P. brass waste for washbasin or

sink. (A) 32mmdia.complete.

51 Providing and fixing M.S. Ladder of required pattern fabricated from 238.50 Kg. 115.14

approved quality mild steel sections comprising side members of M.S. flats

mm × 3 mm and rungs of 12 mm diameter M.S. round bars or 12 mm square

bars placed at uniform spacing, including cutting, drilling, bending, welding

or fixing with round-headed bolts, nuts and washers as required. The item

shall include all necessary anchor fasteners, holdfasts, clamps, brackets,

supports, labour, tools and tackles for complete installation in position. The

ladder shall be cleaned, one coat of approved anti-corrosive metal primer

shall be applied followed by two coats of synthetic enamel/oil paint of

approved shade, complete in all respects as per the approved drawing and as

directed by the Engineer-in-Charge.

52 Providing and fixing 90 cm high Stainless steel railing made from 30.00 Rmt 3603.68

anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand rail with S

S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical support fixed in

RCC slab at 1.2m c/c including three horizontal S S pipes of 25 mm dia

(16Gauge) at eqal distance fixed by 18.75 mm dia (16Gauge) S S pipe with

baluster including accessories as per detailed drawing as directed etc.

53 Providing and fixing toilet accessories comprising approved quality liquid 3.00 Nos 7131.61

soap dispenser, plastic water bucket (minimum 15–20 litre capacity), plastic

mug (minimum 1 litre capacity), and plastic waste bin with lid (minimum

10–15 litre capacity) of approved make and colour, complete with all

necessary screws, wall plugs, brackets and other fixing accessories wherever

required. The item includes supplying, fixing, placing in position, labour,

transportation, and all incidental charges, complete in all respects as directed

by the Engineer-in-Charge.

54 Providing and fixing Horizontal and Vertical Grab Bar of Stainless Steel Grade 2.00 Nos 4239.98

SS 304, minimum 32–38 mm outside diameter, 600 mm long (or as

approved) and Folding (Flip-up) Grab Bar of Stainless Steel Grade SS

minimum 32–38 mm outside diameter and 750 mm long (or as approved)

with satin/matt finish, complete with concealed stainless steel wall flanges,

heavy-duty fixing arrangement, stainless steel screws, nylon plugs and all

necessary accessories, securely fixed to the wall adjacent to the water closet

at the required height as per approved drawings and accessibility guidelines,

including all labour, materials, tools, testing and making good the disturbed

surface, complete.

55 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 51.50 Rmt 43.21

56 Providing and laying broken chine mosaic flooring for terrace using 12 mm 176.90 Sqm. 765.97

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

57 Providing and Laying Machine cut , Machine polished 7.5 cm wide Black 13.20 Sqm. 2896.62

Granite strip flooring laid on 20 mm thick cement mortar 1:6 ( 1 Cement :6

Sand ) on Ramp, jointed with grey cement slurry with pigment including

rubbing polising, finishing etc complete as directed by Engineer in charge.

58 Providing and fixing Swan neck type with swivel spout pillar cock with hook 16.00 Nos 1626.10

with fitting of standard quality as directed by engineer in charge including all

materials and labours etc complete. (i) 15mm

Item Description Quantities Unit Item Rates Amount

59 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete 210.00 Sqm. 704.07

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

60 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 18.00 Cum. 471.69

including watering ramming and consolidating etc. comp.

61 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 15.00 Cum. 3080.90

machine cut stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

62 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 53.00 Pt. 582.77

(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

63 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 6.00 Pt. 309.06

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

64 Providing following type of Modular Type Accessories mounted with PVC / 6.00 Nos 180.79

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (9) 16 Amp. SP one way

65 (10) 6/16Amp. Universal socket Cat.III 6.00 Nos 199.98

66 Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 120.00 Mtr. 104.03

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

67 providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 150.00 Mtr. 140.39

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

68 (b) 2 wire 6 sq. mm 75.00 Mtr. 184.83

69 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 27.00 Nos. 373.70

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat.III

Item Description Quantities Unit Item Rates Amount

70 Supplying and erecting led lamps with following wattage capacity of 220 to 20.00 Nos. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable

LAMP holder (ii) 5 to 8 watts Cat-III

71 Providing and erecting Miniature circuit breaker single pole 6A to 25A 24.00 Nos. 123.22

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat-

72 Providing & erecting 240 V MCB double pole switch for motor & inductive 6.00 Nos. 362.59

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp. Cat-III

73 Sheets steel powder coated enclosure suitable for incorporating One/Two 12.00 Nos. 176.75

74 Providing and erecting Sheet Steel powder coated MCB distribution board - 3.00 Nos. 1492.78

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (A) single phase incoming and horizontal single phase

outgoing (b) sheet steel double door (IP-43) (iv)12 way

75 providing and erecting Approved make RCCBs conforming to IS: 12640 and 12.00 Nos. 2458.34

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

76 Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. 15.00 Kg. 794.87

77 Supplying & erecting earth pit of minimum bore dia.150mm size approved 3.00 Nos. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover. (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

78 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 150.00 Mtr. 366.63

multistrand Copper conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (C) 2 core 6 Sq.

Item Description Quantities Unit Item Rates Amount

79 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 120.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

80 Providing & laying approved make Double walled corrugated pipes (DWC) of 120.00 Mtr. 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)50 mm outer dia

81 Providing and, fixing heavy duty flange type brass cable gland with rubber 6.00 Nos. 38.38

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm

82 Solder less crimping type Copper lugs conforming to IS suitable for cable of 24.00 Nos. 8.08

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/ cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

83 Supplying & erecting single phase approved make industrial exhaust fan 6.00 Nos. 2054.34

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM. [A] 300-

305 mm dia 900 RPM, Cat.II

84 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 3.00 Nos. 61482.74

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel and ISI Certified.

85 Supplying & erecting reverse osmosis (RO) water purification system with 3.00 Nos. 77891.20

M.S. powder coated pedestal frame, prefilter housing carbon filter suitable

buster DC pump, auto low & high pressure switches with following size of

LPH capacity & erected as directed [D] 100 LPH with 1 phase / 3 phase Raw

water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual

media filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High

pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO

Membrane housing with RO membrane of 40*40 - (1No), RO pressure tube 4"

x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

86 Supplying and erecting horizontal / vertical mounting type storage water 6.00 Nos. 11455.42

heater with copper container housed in M.S./S.S./ABS body insulated with

glass wool/puff complete with heating elements,adjustable thermostats 300C

to 850C, indicating lamp, safety valve, fusible plug, etc.complete erected with

coach bolts, nuts. washers & cementation (C)25 Ltr. with 2 KW. heating

element Premium Category

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in figures and words) of the

estimated rate mentioned above Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ……. % Above

Net Rs. …………………….… Total Rs. ………….…

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In – Charge for

which no extra payment shall bemade.

Item Description Quantities Unit Item Rates Amount

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate i.e.

6176/- per mt. mentioned in all the tender.

Dated Signature of the contractor