CERTAIN MISC WORKS PERTAINING TO POP UNDER AGE B/R-II AT IMA DEHRADUN.

Amount

M&L for application of Ist coat including preparation of existing black top road surface by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean 3:1 ratio( water : paint) complete all as spd and directed.

M & L for application of 2nd coat after two days of Ist coat (given in Item No.-1) and prep[ration of existing of black top road surface by bru;shing with wire brushing for removing cacked mud etc sweeping with brooms and finallyfanning th e plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean3:1 ratio( water : paint) complete all as specified and directed.

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads and ermoving of existing old paint etc all as per manufacture instructions complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified.

M&L for preparation of old painted plastered surfaces of walls, pillars and applying one coat of synthetic enamel paint over 1-2 mm thick wall care putty complete all as specified and directed

M&L for preparation of old painted wooden surfaces over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces exc 10cm width or girth etc and applying one coat of synthetic enamel paint complete all as specified.

M&L preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish complete all as specified.

M&L for preparation of existing old surface of any type and apply two coat of weather coat exterior emulsion on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc complete all as per manufacturers instructions. (Rate shall be inclusive of scafolding and other arrangement upto 15m height)

M&L for preparation of existing old surface of any type and apply one coat of weather coat exterior emulsion on vertical as well as horizontal surface inlcuding brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorecence salts, trading oil, greasy spots vegitation, green fungus etc complete all as per manufacturers instructions. (Rate shall be inclusive of scafolding and other arrangement upto 12m height)

M&L for preparation old metal sheet roof of any height by removing mild, dirt and any loose flaps of old paint on roof surface and apply one coat of synthetic enamel paint by mechanical means of machine spray Complete all as per manufacturers Instructions and directed by Engr in Charge.

M&L for complete removal of existing treatment of over concrete kerb stone and applying two coat of synthetic enamel paint over one coat of primer , complete all as spd.

M&L for complete removal / scrapping of existing treatment on wall / ceiling using machine scrubber etc upto to the height 15m complete all as per manufacturers instructions and directed by Engr in Charge (Rate shall be including scafolding and other arrangement to reach height)

M&L for one coat wall putty on wall / ceiling through normal applications to provide smooth surface complete upto to the height 15m complete all as per manufacturers instructions and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for one coat of primer on wall / ceiling through normal applications complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for two coat of plastic emulsion paint (light / dark shade) on wall / ceiling through normal application complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for providing and fixing 25 to 30mm thick plaster of paris ceilling/wall POP designer frame ( gypsum anhydrous) to flat surface over metal frame work and reinforced ,with G.I. wire mesh and fillets any sunk or raised moulding completed all as specified and directed

Ditto - but to curved surface.

M&L for preparation of existing old surface and one coat of plastic emulsion (light / dark shed) on wall complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

Demolition of cement concrete in ground floor and pavings n.exc. 15 cm thick below or above ground level. (un renforced)

M & L for machine pressed coloured rubberised precast concrete interlocking paver block any shape and size conforming to IS -15658 - 2006 of 80 mm thickness, M-40 grade set, jointed and pointed in neat cement slurry in floors with cement pigment completed all specified and directed.

M & L for machine pressed coloured rubberised precast concrete interlocking paver block any shape and size conforming to IS -15658 - 2006 of 60 mm thickness, M-35 grade set, jointed and pointed in neat cement slurry in floors with cement and pigment complete all specified and directed.

M&L for Sand cushion layer not exceeding 25mm thick under paver block etc complete all as specified. completed all specified and directed.

M&L 4mm thick AC building board fixed to timber frame work in ceiling with screw or with nails to timber framework including dismantling

S&F machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer –in-Charge. Complete all specified and directed .

M&L for Grinding , rubbing and polishing on existing marble / granite/ kota stone /mozaic/ stone work where ever required to give high gloss finish complete

M&L 16 - 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved all as specified and directed.

M&L for PCC 1;4;8 type D-2 (40 mm graded stone aggt) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed

M & L for chequered heavy duty glossy finish cement tiles 30cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments complete all as spd. & directed,

M & L for 20 mm thick scred bed or bedding layer of mortar in 1:6 for laying of flooring complete all as specified and directed.

Regular repair for building work related to joinery & masonary and plumber work , including minor repair to doors , replacment of glass pans tighting of wire cloths oil putty bow handle , tower bolt , sliding bolts etc, Repair to brick work , plaster repair of boundary wall pillers drain repair of brick work , plaster repair boundary wall pillers .Repair and replacment ,WHB, WC , stop cock, tabs, water tanks fittings and cleaning flote valve etc. Providing One mason , one plumber, and one carpenter per day for full day in normal working hours, complete all as specified and directed by Engr-in -Charge. Note:- Attending one copmlaint shall be measured as one job

Providing, cement concrete type 1:2:4 B-1 20mm graded in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, gola ,kerbs not provided for in Item 04028, water troughs and the like ncluding weathering, slightly rounded or chamfered angles and throating, as directed

M&L for Exterior colour tile skirting and dado of size 30x60cm x7to 8 mm thick and jointed with grey cement slurry and pointed in same colour tile grout to match the shade over and including screed bed or bedding layer or mortor 15mm thick in cement mortor 1:6 including dismantling existing tile complete all as specified and directed.

M&L for 20mm thick screed bed in CM (1:4) over concrete surface finished even & smooth with out extra cement with water proofing compound @ 3% by weight of cement or as per manufacturer instructions while the concrete is green (WPC shall be paid for separately)

M&L for Coloured Vitrified tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade/colour of tile.

M&L for heavy duty precast prepolished coloured cement concrete cobble stones paver block of size 100x100mm and 80 mm thickness of M-35 grade of fiber reinforced concrete (FRC) with approved colour, design and pattern, thickness & size / shape made by table vibratory method using rubber mould with strong vibratory compaction laid over 100mm thick PCC (1;4;8 type D-2), using 40 mm graded stone agg and 20 mm thick 1:4 Screed bed or bedding layer of mortar including dismantling of existing damaged flooring etc complete, all as specified and directed.

M & L a coat of cold applied bituminous primer over cleaned surface @ 0.50 Kg/Sqm and laid 3mm thick APP modified five layer ploymeric membrance, minimum wt 3.60 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 150gms/Sqm) with torch application mathod as per the manufacturers instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces wih grooves & make good in cement mortar 1:3 , finally if required & finally finished with bituminous aluminium paint @ 0.20 Kg/Sqm etc complete all as spefified including taking down existing roof treatment from the RCC slab, cleaning off all foreign material by wire brushing cleaning off surface and removal of spoil to a distance n.exc 500 mtr complete all as directed. Make Approved by GE. NOTE :- (a) Work shall be executed by authorised applicator of manufacture as per manufacturers instructions and upto roof hight of tripple stories building.(b). 10 years of manufacture s guarantee shall be excuted in smart assurance system complete all as spfd and directed. (Incl removal of existing roof treatment / padding)

Supply only water proofing compound. completed all specified and directed.

M&L for repair by dismantlig of existing wooden floor and provide new HDF laminate wooden flooring of 15 mm thick over 2 mm thick Foam sheet over a layer of polythene film sheet over and including wooden fillets of size exc 16 sqcm but not exceeding 25 sqcm and all necessary fixtures to match with existing floor level and finished top finished floor. completed all specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified

S&F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified

S&F in repairs pre-painted galvalume aluminium zinc coating GI based tile profile corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws all as specified. Tata Blue Scope, JSW Steel ( colour on +) Jindal india Ltd (Neu colour+)

M&L for applying a coat of Texture paint of any colour/shed including complete removal of old coating as per manufactures instructions complete all as specified.

M&L for preparation of cement concrete ground floor/surface by brooming , washing and scrubing with wire brush to remove algae,fungus and moss growth than apply a self priming coat of acrylic waterproof floor paint after diluting the emulsion with 30-40% water and after 6-7 hours apply 02 coats of acrylic waterproof floor coat emulsion for outdoor application after thining with water to obtain brushable consistency and glossy finish etc all as directed by Engr-in- charge.

M&L for Coloured durastone heavy duty vitrified tiles 9 to 10 mm thick Sq/rectangular tiles area of each tile not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade /colour of tile.

Aggrawal Builders and Furnishers (BID ID -3446379)

M/S PUNDIR BUILDERS (BID ID -3446863)

Aron Water Proofing and Pest Control (BID ID -3446715)

M/S RAJESH KUMAR GOYAL (BID ID -3446839)