Construction of ladies toilet block and Providing &Powder Coated GI Sheet at RSO Narol Campus under Sabarmati Circle office

Name of work: Construction of ladies toilet block and Providing & Fixing Powder Coated GI Sheet at RSO Narol

Campus under Sabarmti Circle Office.

Sr. Description Qty. Unit Rate Amount

1 Dismentaling of sheet roofing including ridges, 1300.00 SMT.

Hips, Valleys, Gutters etc. stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.(i) G.I.sheet roofing.

2 P/F powder quoted GI sheet of Jindal or equivalent make 1300.00 SMT.

having width of 1050mm ( effective 1000mm) of 0.6mm thick

of required clour blue/or white with instakllation as per

directied by EIC complete etc . The rates are excluding cost of

Purlins , Rafters and trusses etc.

3 Painting two coats (including priming coat) on new steel and 590.00 SMT.

other metal surfaces with enamel paint, brushing interior to

give an even shade including cleaning the surface of all dirt,

dust and othr foreign matter.

4 Dismentalling tiled of stone floors laid in moter including

stacking of serviceable materials & dispossal of unserviceable 50.00 SMT 47.25

materials with all lead & lift

5 Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and 10.00 Nos. 185.85

lift.(i) Not exceeding 3 Sq.M. in area.

6 Dismentalling santtary fittings like wash basin W.C.pan

Indian and Euripean type, flushing tank etc. including stacking 5.00 Each 401.63

the materials with all lead and lift.

7 Providing & laying coloured glazed tiles 6mm. Thick in

flooring, treads of steps & landing laid on a bed of 12mm.

Thick cement mortar (1:3) (1 cement : 3 coarse sand finished

with flush pointing in white cement.

8 Providing & laying coloured glazed tiles of size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm / bigger than size

shown in skirting, risers of steps & dedo on 10mm thick 50.00 SMT. 1426.95

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with

white cement slurry

9 Dismentling doors, windows, ventilators etc. (wood or steel) 6.00 Nos.

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area.

10 Pro. And fixing single layer water proof gypsum board 12.5 15.00 SMT

mm thick sections using water proof board of size 1220 mm x

1830 mm x 8.0 mm suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate channel og size 18 mm x

40 mm x 0.8 mm at 1220 mm center to center ceiling section of

size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter

channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges

& drops incl.paper tap sand sofit cleat, anchor fastener, scoch

bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc. comp. as

per detail drawing as directed

11 Providing & Fixing EUROPEON TYPE W.C. commode of 2.00 No

CERA make including necessary `P' or `S' trap, bends &

having plastic `ARAM' seat with cover fixing with screws

with fixtures & connection for flush cock etc., complete

including C.I. Pipe connection up to manhole chamber for G.F.

& up to outside wall for other floors with bends etc., complete

in working condition as directed by E.I.C.(with 12.5 liter PVC

flush Tank incl. all accessories) Providing & fixing plastic seat

cover for wash down water closet with C.P brass hinges and

rubber buffers.(B) Black plastic seat and coverProviding and

fixing 12.5 litres low level flushing cistren with a pair of C.L.I.

Or Mild Brakets, complete with fittings such as symphonic

arrangements, 15 mm. nominal size brass ball valve with

plythene float lever, G.I.chain (60 cm.) and pull union and

couplings for connections with inlet, outlet and over flow,

pipes etc. including cutting holes in walls and making good the

same (over flow pipe to be measured and paid for seperately)

Item, the whole terrace shall be flooded wit

12 Providing and fixing washbasin with single hole for pillar tap 2.00 No

with C.I or M.S brackets painted with including sutting holes

and making good the same but excluding fittings. (A) Vitreous

China (ii)Flat back wash basin 550 mm* 400 mm size. (i) In

13 Providing Laying and jointing in true line & level 15 mm dia. 25.00 RMT

U.P.V.C. pipe (Sch 40) for cold water including fittings of

make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent

as approved by EIC. pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concelled as

directed including necessary fittings etc and fixing the same

with adhesive solvent including cost of all materials etc

14 Providing Laying and jointing in true line & level 25 mm dia. 25.00 RMT

U.P.V.C. pipe (Sch 40) for cold water including fittings of

make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent

as approved by EIC. pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concelled as

directed including necessary fittings etc and fixing the same

with adhesive solvent including cost of all materials etc

15 Providing & fixing 600mm x 450mm bevelled edge mirror of 2.00 No

superior glas mounted on 6mm thick AC sheet or plywood

sheet and fixing to wooden plug with CP brass screws and

16 Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 3.00 No

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I. screw down or hinged grating

including cost of cutting & making good the walls and floor

17 Providing & Fixing S.W. Gully trap with C.I. grating brick 3.00 No

masonary chamber & water tight C.I. cover with frame of

300mm X 300mm.size inside with standard weight. (i) Square

mouth trap (B) 150mm. X 100mm. size P or R type.

18 Providing and fixing to wall ceiling and floor 10.0 kg./cm2

working pressure polythylene pipes of the following outside

dia. special density, complete with special flange compression 15.00 RMT 124.43

type fittings, wall clips etc. including making good the wall

ceiling and floor.

40 mm. dia. PVC pipe.

19 Providing and fixing to wall ceiling and floor 10.0 kg./cm2

working pressure polythylene pipes of the following outside

dia. special density, complete with special flange compression 20.00 RMT 274.68

type fittings, wall clips etc. including making good the wall

ceiling and floor.

75 mm dia PVC pipe

20 Providing and fixing to wall ceiling and floor 10.0 kg./cm2

working pressure polythylene pipes of the following outside

dia. special density, complete with special flange compression 25.00 RMT 332.91

type fittings, wall clips etc. including making good the wall

ceiling and floor.

110 mm dia.PVC pipe.

21 Providing & Fixing Screw down bib taps of following size (B)

Brass chromium plated screw down bib tap of 15MM. Dia.

22 Providing & fixing pillar tap capstan head, screw down high

pressure with screws, shanks and back nuts. 15MM DIA. 4.00 No 305.67

23 Providing & Fixing brass screw down stop cock of 15mm dia 4.00 No 203.79

24 Providing & Fixing chromium plated brass half turn flush cock of

approved quality including fixing in pipeline etc.. Complete……… 4.00 Each 261.16

25 Providing and fixing standard extruded alluminum section of size

63mm x 38.10mm x 1.2mm (of Jindal Section no. 2434,@ Wt.

0.643 Kg/Rmt) with colour powder coated alluminium frame for 3.00 SMT 1163.92

ventilation with 5mm thick frosted glass as per details etc complete

for louvered glass Ventilation.

26 Providing & fixing concealed point wiring with single PVC

insulated flexible wire 1100 volt grade copper stranded, (FR

grade) ISI mark of approved quality ; using 1.5 mm thick 1"dia

sized ISI mark PVC Pipe with shock proof ISI mark standard brand

switch as per instruction of E.I.C. (Excavation of cavity in wall/

ceiling, laying of PVC pipe,Drawing of copper wire lines, providing 3.00 RMT 317.00

of switches, switch board (Acralic Sheet with 4mm thick laminated

sheet) socket, plug etc, finishing the wall/ ceiling. The length of the

off wire up to 5 mtr)

Notes : Rates applicable per POINT i.e NOs.

27 Providing & fixing 15Amp. 250 Volt ISI mark plug socket with

switch on same switchboard provided for item no.1 including

necessary wiring & adequate earthing wire as per specification &

instructions of E.I.C. Laying of Phase wire, (2+3 Plug socket, 2-in-1 1.00 Nos. 364.00

plug socket on the board, with the switch) Rates are applicable per

28 Providing & Fixing of Fixtures for CFL/ Tubelight fixtures in POP

as per instructiopn of the E-I-C.

29 Providing & Fixing heavy duty electric exhaust fan of sweep size

300 mm of ISI approved make as directed.

30 Providing and fixing FRP frame size 100x50 mm and 28mm thick

FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is to be 5.00 SMT 2354.22

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.

31 Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one percent is 9.00 SMT 104.9

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

32 Providing and laying Polished Kota stone slab 25 mm. Thick

in resiers of steps. Skirting Dado and pillars laid on 10 mm.

Thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed

with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc complete.

33 Demolition and disposal of unserviceable materials with all 3.00 CMT

lead and lift. (i) PCC

34 Demolition of Brick work and stone masonry including 10.00 CMT

stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.(ii) In Cement Mortar.

35 Providing and laying cement concrete 1:4:8 (1 Cement : 4 3.00 CMT.

coarse sand : 8 Machine crush metal aggregates 40 mm

nomial size) and curing complete excluding cost of form work

in (A) Foundation and plinth

36 Brick work using common burnt clay building bricks having 4.00 CMT.

crushing strength not less than 35 Kg./ sq.cm. in foundation &

plinth in cement mortar 1:6 ( 1 cement : 6 Fine sand )

(B) Conventional

37 Brick work using common burnt clay building bricks having 10.00 CMT.

crushing strength not less than 35 Kg./ sq.cm. in Super

structure above plinth level (upto floor two level) in cement

mortar 1:6 ( 1 cement : 6 Fine sand ) (B) Conventional

38 Providing 20 mm thick double coat mala cement plaster on 35.00 SMT

interior brick / concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

39 20mm. Thick sand faced (Tipani) cement plaster on walls up 50.00 SMT.

to height 10 meters above ground level consisting of 12mm.

Thick backing coat of C.M. 1:3 ( 1 cement : 3 sand ) and 8

mm. thick finishing coat of C.M. 1:1 ( ! Cement :1 sand) etc..

40 Applying two coats of Birla (White cement based) Or Asian 15.00 SMT

(acrylic lapi-putty) or equivalent & two coats of primer

approved brand and manufacture on new wall surface to give

an even shade including throughly brushing the surface free

from mortar dropping and other foreign matter and sand

41 Wall painting two coats with weather proof acralic emulsion 50.00 SMT.

APEX type paint of approved brand & manufacture and of

required shade on exterior wall surface to give an even shade

over and including a primery coat with alkaly resistance

primer of approved brand after throughly brushing surface to

remove all dirt and remains of loose powdered materials etc

comp. for all height.(R.A)

42 Providing & fixing china mosaic tiles flooring as water 12.00 SMT.

proofing treatment including (a ) Applying cement slurry of

cement admixed with water proofing compound after cleaning

the surface properly. (b) Cracks in slab shall be open in ' V '

groove & all loose materials shall be removed & crack filling

shall be done with special & approved type of expanding crack

fillet material . ( c ) Depressions in slab if any be filled up

with C.C.(1:2:4 ) I.P.S.flooring. ( d ) P / L 20 mm thick plaster

layer in C.M. ( 1:4 ) with cement admixed with water proofing

compound including rounding of junction of walls and slab by

making cement vata. ( e ) Finishing the surface with china

mosaic tiles (pieces ) flooring incl.fixing the same in cement

mortar (1:2) setting with ready made tile adhesive as

recommended by manufacturer’s including fillings of joints

mixed with pigmented white cement slurry of matching shade

& finally finishing the surface with trowel with white cement

slurry etc., complete ( f ) After finishing, the whole terrace

shall be flooded with water to check the performence of work.

43 Providing & Laying cement concrete M-200 and finishing 2.00 CMT.

smooth with curing etc. complete including the cost of form

work but including the cost of reinforcement for R.C.C. work

in (II) slab having more than 10cm & up to 13cm.

thickness. (Upto floor two level).

44 Providing TMT bar FE 500 reinforcement for RCC work 690.00 KG.

including bedding binding and placing in position complete

upto floor two level.

45 Constructing brick masonary chamber for underground C.I

Inspection chamber and bends with bricks having crushing

stregth no less then 35 kg/cm2 in c:m 1 :5 C.I. cover with

frame (light duty) 445 mm x 610 mm internal dimensions total

weight of cover with frame to be not less than 38 kg (wt. or

cover 23 kg. and wt of frame 15 kg) R.C.C.top slab with 1: 2 :

4 mix (1 Cement :2 coarese sand : 4 grade stone aggregate

mm size) foundation concrete 1 : 5 : 10 inside plaster 15 mm

thick with cement mortar 1 : 3 finished smooth with a floating

coat of neat cement on walls and bed concerete etc. complete.

i) Inside dimensions 455 mm x 610 mm x 450 mm deep for 2.00 NOS.

single pipeline

46 Providing & laying R.C.C. Coping in ordinary cement 1.00 CMT

concrete M-200 and curing complete including cost of form

work but excluding cost of reinforcement steel etc complete

(For building up to floor two level)

47 Providing formwork of ordinary timber planking so as to give 3.00 SMT

a rough finish including centering shuttering strutting and

propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete

work in. (I) Edges of slabs and Breaks in floors and walls.

48 Providing & Laying ordinary cement concrete M-200 and 3.00 CMT

finishing smooth with curing etc. complete including the cost

of form work but excluding the cost of reinforcement for

R.C.C. work in Beam (up to floor two level) Note: Cement

consumption rate diff. added Rs.435.37 for ordinary concrete

Estimated Cost = A

B Bidder's offer (+/-) in %

C Grand Total [C = A + (A*B %)]

C Grand Total [C = A + (A*B %)]

D Add 1% Welfare cess on C

E Sub Total (Incl. Welfare Cess) E=C+D

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including GST------G=E+F

G Grand Total including GST------G=E+F

Final offer (in Rs.)

Final offer (Rs. in Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications

put up by UGVCL on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We

am/are willing to carry out the work at quated rate as above.

Seal & Signature of Contractor Addl. Chief Engineer

UGVCL, CO, Sabarmati