REPLACEMENT OF UNSV/BROKEN LT OVERHEAD LINES AND POLES NEAR PH NO 2 LAKKARMANDI AT AIR FORCE STATION DALHOUSIE UNDER GE AIR FORCE PATHANKOT

Amount

1 M&L for dismantling form insulators including taking down ACSR conductor any sized from overhead lines complete all as specified. -2.56 Per Qtl 2 M&L for dismantling insulator any type and any size from overhead lines completes all as specified – 24 Each 3 M&L for cutting/trimming tree branches around overhead lines to a distance of 01 meter both size from overhead lines or poles after taking proper shut down of electric supply from MES all as directed by Engr-in-Charge. -2 Per 500 RM 4 M&L for ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connected all as directed. – 2.56 Qtl 5 M&L for shackle type, porcelain vitreous white, brown or green insulator including galvanized mild steel straps, washers, insulator bolts, washer and nuts of size 100 mm height and 115 mm dia for 1100 volts grade complete all as specified and directed. 6 M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint. 7 S&F PVC 1100 volts LT phase separator/spacer for 3 phase 4 wire system incl taking down U/S separate all as specified by Engr-in-Charge. – 40 Each 8 M&L for dismantling taking out broken/ worn out steel pole of 8.5 to 9.0 Mtr long and keeping aside for refixing including conductor, insulator etc or carrying to store for credit – 6 Each 9 M&L for steel tubular swaged pole complete with cast iron base plate, final tapper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS : 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9Mtr Long) – 6 Each 10 M&L for excavation in trenches in any type of soil, not exceeding 1.5m in depth : for foundation, laying of cable / poles and getting out complete all as specified & as directed by by Engr-in-Charge. – 6 Cum 11 -ditto- as per item No 10 above but beyond 1.5 m depth. – 0.65 Cum 12 M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layer all as specified. – 2.77 Cum 13 M&L for removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified. – 3.88 Cum 14 M&L for cement concrete in foundation, filling and mass concrete type D2 1:4:8 with 40mm graded aggregate for pole bedding. – 0.65 Cum 15 M&L for cement concrete in foundations, filling and mass concrete type C2 1:3:6 with 40mm graded aggregate for foundation of pole. – 3 Cum 16 M&L for cement concrete in foundations, filling and mass concrete type B2 1:2:4 with 40mm graded aggregate for coping of pole. – 0.20 Cum 17 M&L in replacement of earthing complete with M.S galvanized earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (13:6) type C-1 chamber with RCC cover (1:2:4) type B1q, 40 mm thick reinforced with 6 mm dia bar, 3 Nos both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of zie 20 mm dia med. Grade, lugs, main earthing lead upto 7.5 mtr incl, charcoal dutst, salt etc, all as shown in electrical plate No 3 of SSR Pt-I 2009 specification. 1 Each set 18 M&L in replacement of Stay assembly with stary rod 20 mm dia, 1.8 mtr in length complete with accessories as shown in electrical Plate No 1 (size of stary strand 7.4.00 mm, stay grip 7/3, 15 mm) including loop type insulator large size with overall dimensions 140 mm dia, clearance of hole 25.5 mm, stay clamps and necessary excavation and PCC complete for LT pole as required- 4 per set

M/S SINGH AND ASSOCIATES (BID ID -3129115)

PARVINDER BHARDWAJ (BID ID -3129143)