REPAIR MAINTENANCE OF FITTINGS FIXTURES REWIRING AND REPLACEMENT OF DB MCB LIGHT FITTINGS ETC AT AMBC BUILDINGS ORA SINGLE OFFICERS OTM OFFICER MESS DSC LINE AREA ACCNS AT ETTIKULAM ETC AT INA EZHIMALA

Amount

Notes for all items of BOQ :- 1. The contractor should visit the site before quoting the tender to know the exact working condition of the station. 2. All requisite safety measures to be adopted by contractor on site. 3. The contractor shall provide and deploy sufficient electrician ( as approved by GE/ Engineer in charge) shall report at 9.00 hrs to JE E/M / Engineer in charge to collect the complaints job card in working days and complete the same complaint within 24 Hrs. 4. The complaints shall be rectified within 24 Hrs, if the complaints is/are not attended / not completed with in 24 Hrs ( except repair/replacement of major items) recovery will be done at Rs. 500 per complaint per day. 5 For major parts like rplacement of MCB,DBs,MCCBs etc should be rectified within 5 working days, if the contractor not rectify within time then the recovery will be done at Rs 1000 per complaint per day. 6. After completion of Job work complaint, the contractor has to produce job card duly signed by user & JE /Engineer in charge. 7 If contractor failed to provide their electrician or attend the complaints then recovery will be done at Rs 1000 per day.

M&L for sub main wiring using 2 runs of 2.5 Sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed/open conduit along with 1 run of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly including taking down the unserviceable wiring complete all as specified and directed by Engineer-in-Charge.

All as per item No.02 above but FRLS cable of 2 runs 1.5 sqmm with earth wire 1.5 sqmm 1 run complete all as specified and directed by Engineer-in-Charge.

All as per item No.02 above but in pvc casing and capping of suitable size complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring using 2 runs of 4 Sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through PVC casing capping along with 1 run of 4 Sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly including taking down the unserviceable wiring complete all as specified and directed by Engineer-in-Charge.

All as per item No.05 above but in pvc conduit of suitable size complete all as specified and directed by Engineer-in-Charge.

All as per item No.05 above but in pvc conduit of suitable size and FRLS cable of 2 runs 10 sqmm with earth wire 10 sqmm 1 run complete all as specified and directed by Engineer-in-Charge.

All as per item No.05 above but in pvc conduit of suitable size and FRLS cable of 2 runs 6 sqmm with earth wire 6 sqmm 1 run complete all as specified and directed by Engineer-in-Charge. Note for Item No 2 to 8:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Three runs of cable and one run of conduit /casing & capping with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for sub main wiring using 4 runs of 4 Sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through PVC casing capping along with 2 runs of 4 Sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly including taking down the unserviceable wiring complete all as specified and directed by Engineer-in-Charge.

All as per item No.09 above but in pvc conduit of suitable size complete all as specified and directed by Engineer-in-Charge.

All as per item No.09 above but in pvc conduit of suitable size 4 runs of 6 sqmm cable with earth wire 6 sqmm 2 run complete all as specified and directed by Engineer-in-Charge. Note for Item No 9 to 11:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Six runs of cable and one run of conduit /cassing & capping with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Supply and fixing in repair MCB protected socket PVC plastic Base model with one single pole MCB, AC 240 Volts, 20/32 Amps complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB TPN double door for 4 way with 200 Amps rated bus bar 415 Volts, AC supply fixed to the existing wall after removing the unserviceable MCB DB and reconnecting the electrical connections and making good the disturbed portion surfaces with same as existing wall complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB TPN double door for 8 way with 200 Amps rated bus bar 415 Volts, AC supply fixed to the existing wall after removing the unserviceable MCB DB and reconnecting the electrical connections and making good the disturbed portion surfaces with same as existing wall complete all as specified and directed by Engineer in charge.

S&F in repair MCB TPN 415 Volts 25/32 Amps,C series, 415 volts, 50 Hz, 10 Ka breaking capacity complete all as specified and directed by Engineer in charge.

S&F in repair MCB TPN 415 Volts 40/63 Amps C series, 415 volts, 50 Hz, 10 Ka breaking capacity complete all as specified and directed by Engineer in charge.

S&F in repair MCB single pole 6 to 32 Amps capacity,C series 230 Volts complete all as specified and directed by Engineer in charge.

S&F in repair MCB single pole and neutral 32 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts complete all as specified and directed by Engineer in charge.

S&F in repair MCB single pole and neutral 40 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts complete all as specified and directed by Engineer in charge.

S&F in repair RCBOs for earth leakage protection 2 pole 30m Amps,25 Amps complete all as specified and directed by Engineer in charge.

S&F in repair RCBOs for earth leakage protection 4 pole 30m Amps,63 Amps,415 Volts complete all as specified and directed by Engineer in charge.

S&F in repair RCBOs for earth leakage protection 4 pole 30m Amps,25/32 Amps,415 Volts complete all as specified and directed by Engineer in charge.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, etc and making good matching to the existing colour to the disturbed surface complete all as specified and directed by Engineer in charge.

M&L for color code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size, concealed /open suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches,regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly all as specified for the following:- Note:- i. Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. ii. Same size wire shall be used for phase, neutral and earth conductor. iii. The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads.

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches

(c) 5 Amps socket point on independent board

M&L for color code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC Casing and caping of suitable size, suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) including FRLS 1.5 sqmm earth wire copper insulated connected to common earth dolly all as specified for the following:- Note:- i. Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. ii. Same size wire shall be used for phase, neutral and earth conductor. iii. The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads.

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches

(c) 5 Amps socket point on independent board

All as per item no 24 here in above but 2.5 sqmm for 5/15 Amps socket on independent board complete all as specified and directed by Engineer in charge.

All as per item no 25 here in above but 2.5 sqmm for 5/15 Amps socket on independent board complete all as specified and directed by Engineer in charge.

Supply and fix in repair lamp holder,PVC/Polycarbonate type with back plate suitable to batten/bracket fittings complete all as specified and directed by Engineer in charge.

S&F in repair calling bell, ding dong AC 230 Volts, single pole complete all as specified and directed by Engineer in charge.

S&F in repair ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engineer in charge.

S&F in repair modular switch one way 6 Amps 1 module complete all as specified and directed by Engineer in charge.

S&F in repair modular socket 6 Amps 2/3 pin 2 module complete all as specified and directed by Engineer in charge

S&F in repair modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose,complete all as specified and directed by Engineer in charge.

S&F in repair modular switch one way 16 Amps 1 way 1 module , complete all as specified and directed by Engineer in charge.

S&F in repair modular two way switch 6 Amps 1 module,complete all as specified and directed by Engineer in charge.

S&F in repair modular bell push flush type 6 Amps 1 module, complete all as specified and directed by Engineer in charge.

S&F in repair modular fan step regulator 120W, electronic 2 module step up type AC 230 Volts complete all as specified and directed by Engineer in charge.

S&F in repair 6 Amps 3 pin Plug top complete all as specified and directed by Engineer in charge.

S&F in repair 16 Amps 3 pin Plug top complete all as specified and directed by Engineer in charge.

S&F in repair Switch socket combination 5 pin 6A/5A with box complete all as specified and directed by Engineer in charge.

S&F in repair Switch socket combination modular type 5 pin 15/16A with box complete all as specified and directed by Engineer in charge.

S&F in repair Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB SPN 230V double door type with bus bar of appropriate current carrying capacity, neutral link, earth bar and din rail complete all as specified and directed by Engineer in charge of following size:-

S&F in repair Modular white cover plate with frame, 2 module complete all as specified and directed by Engineer in charge.

All as per item No.44 here in above but 3 module.

All as per item No.44 here in above but 4 module.

All as per item No.44 here in above but 6 module.

All as per item No.44 here in above but 8 module.

All as per item No.44 here in above but 12/18 module.

S&F in repair thermostat for all type of geyser 2000 Watt as required at site complete all as specified and directed by Engineer in charge.

S&F in repair geyser element 2000 Watt triangle type complete all as specified and directed by Engineer in charge.

Disconnect electric connections and taking down carefully unserviceable ceiling light/flood light/ Highbay light fittings of different capacities at Nalanda main building/ Aryabhatta/ Bhaskara/ Panini Library/ URU tennies court /badmintion court etc.opening of cover and body for repair/ replacement of electrical items and refixing the same or fixing only new items /fittings including connecting/ testing complete all as specified and directed by Engineer in charge. Note:- Fitting are fitted at 16 to 20 mtr height.The contractor shall arrange ladder/ scaffolding of required height at his own arrangement.The rates quoted are deemed to be included for the above provision.

Supply only energy saving, enviormental friendly, long life, exclusive innovative die cast aluminium IP 66 flood light 150 W LED With 10 KV SPD complete all as specified and directed by Engineer in charge. Make:- Crompton Model Pluto Neo. cat part No LFLN-150-CDL/60-M or equivalent in Philips/ Wipro/Jaquar/Havells

S&F in replacement wall mounted 20 W LED 4ft batten with colour temp 6000K having extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make : Crompton cat No LDL 20 - CDL or equivalent in HAVELLS/ PHILIPS/WIPRO/JAGUAR

S&F in replacement of 18 W round recess mounted LED , Pressurised Die cast Aluminium Housing and high translucent frosted plastic diffuser with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat No LSCRM-18-CDL Model Pearl Nios-R or equivalent in Philips/Wipro/Jaquar/Havells

S&F in replacement Recess mounted down lighter 15 w with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-15W-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Recess mounted down lighter 12 w with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-12W-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Recess mounted down lighter 18 w,warm white with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-18-WW or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Recess mounted down lighter 12 w ,warm white with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-12W-WW or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement surface mounted down lighter 12 w ,warm white with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCSM-12W-WW or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Recess mounted down lighter 18 w , with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-18W-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Recess mounted down lighter 12 w , with pressure diecast aluminium heat sink & PC diffucerin white powder coated finish withintegrated driver and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat part No LSCRM-12W-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F slim design LED 12 w recessed square poly carbonate housing down lighter with superior light output integral driver. Efficacy 100 lm /w complete all as specified and directed by Engineer in charge. Make:- CG model QUARTZ+S cat part No LSDEP- 12-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F slim design LED 9 w recessed square poly carbonate housing down lighter with superior light output integral driver. Efficacy 100 lm /w complete all as specified and directed by Engineer in charge. Make:- CG model QUARTZ+S cat part No LSDEP- 09-CDL or equivalent in Havells/Wipro/Philips/Jaquar.

S&F spot light upto 7 watt WH/WW LED white body wall light for focusing wall complete all as specified and directed by Engineer in charge. Make:- Luker code No LSPO7 or equivalent in Crompton or Havells/Wipro/Philips/Jaquar.

S&F slim design LED 9 w recessed square poly carbonate housing down lighter with superior light output integral driver. Efficacy 100 lm /w complete all as specified and directed by Engineer in charge. Make:- CG model QUARTZ+S cat part No LSDEP- 09-NW or equivalent in Havells/Wipro/Philips/Jaquar.

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 W with opal diffuser with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make :-Jaquar Cat part No LBL01x010xC or equivalent in Havells/Wipro/Philips.

S&F in replacement 18 Watt High efficacy 1x1 LED flat panel with CRCA housing and high brightness LED for glare-free homogenous illumination complete all as specified and directed by Engineer in charge. Make:- Crompton Cat NO LCTLSNE-18-FO-CDL/ or equivalent in Havells/Wipro/Philips/Jaquar.

S&F surface/ ceiling mounted LED batten fitting 20 W( 4 feet) warm white extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver including taking down of old fittings complete all as specified and directed by Engineer in charge. Make :- Crompton TRIM LINE cat part No LDL-20 -WW or equivalent in Jaquar/Havells/ Philips/Wipro.

S&F surface/ ceiling mounted LED batten fitting 10 W(2 feet) warm white extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver including taking down of old fittings complete all as specified and directed by Engineer in charge. Make :- Crompton TRIM LINE cat part No LDL-10 -WW or equivalent in Jaquar/Havells/ Philips/Wipro.

S&F surface/ ceiling mounted LED batten fitting 10 W(2 feet) extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver including taking down of old fittings complete all as specified and directed by Engineer in charge. Make :- Crompton TRIM LINE cat part No LDL-10 -CDL or equivalent in Jaquar/Havells/ Philips/Wipro.

S&F in replacement Recess full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 W (2 ' x 2 ') in MS housing with opal diffuser with colour temp 6000K, Luminous efficacy-> 100/watt,CCT> 5500 k,CRI- 80,Power factor >0. 95,THD < 10 with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/ connection terminals including aluminium frame for fitting the same complete all as specified and directed by Engineer in charge. Make :- Crompton cat part No LCTLRNE-36-FO-CDL or equivalent in Jaquar/Havells/ Philips/Wipro.

S&F in repair capacitors 4 mfd, AC 440 Volts suitable for exhaust fan complete all as specified and directed by Engineer in charge.

S&F capacitors 2.5mfd, AC 440 Volts suitable for celling fan/ exhaust fan complete all as specified and directed by Engineer in charge.

S&F 9 W LED lamp with base B22 complete all as specified and directed by Engineer in charge.

S&F 9 W LED lamp warm white with base B22 complete all as specified and directed by Engineer in charge.

S&F 9 W LED lamp warm white with base E27 complete all as specified and directed by Engineer in charge.

S&F hylam sheet 3mm thick suitable for switch board etc complete as specified and directed by Engineer in charge.

S&F in repair MCCB four pole 100 Amps 16/18 kA 415 Volts, 50 Hz suitable for existing busbar size complete all as specified and directed by Engineer in charge.

S&F in repair MCCB four pole 160 Amps 25 kA 415 Volts, 50 Hz suitable for existing busbar complete all as specified and directed by Engineer in charge.

S&F in repair modular box suitable for fixing 1/2 module complete all as specified and directed by Engineer in charge.

S&F in repair modular box suitable for fixing 3 module complete all as specified and directed by Engineer in charge.

S&F in repair modular box suitable for fixing 4 module complete all as specified and directed by Engineer in charge.

S&F in repair modular box suitable for fixing 6 module complete all as specified and directed by Engineer in charge.

S&F in repair modular box suitable for fixing 8/12 module complete all as specified and directed by Engineer in charge. Note for item No.76 to 80:- The rate quoted for replacing of modular box is deemed to be inclusive of necessary cement/putty work and finishing work of white wash /colour wash for matching with existing surface.

S&F in replacement high efficacy 1x1 LED 18 watt surface full lit luminaire with glare free unifrom illumination with longer life and less maintenance and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals Luminous efficacy > 100/w, CCT .5500 k,CRI > 80,PF .0.95 complete all as specified and directed by Engineer in charge. Make:- Crompton LCDSPLN-S-18-CDL or equivalent in Philips/Wipro/Jaquar / Havells

S&F in replcement of 18 W round surface mounted LED pannel, Pressurised Die cast Aluminium boHousing and high translucent frosted plastic diffuser with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton LCDSPLN-R-18-CDL Model Pearl Nios-R or equivalent in Philips/Wipro/Jaquar/Havells

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire out put lumen >100 lumen/w, CCT > 5500 k, power factor > 0.95 comprising of high brightness LEDs 10 W with opal diffuser with all accessories pre-wired and including connecting up with 3core flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Jaquar cat No LBLK01x010xC or equivalent in Havells/ Crompton/Philips/Wipro.

S&F in replacement Decorative wall light (Globe Type ) fixture made up of poly carbonate suitable up to 1 x 10 W LED Bulb (B-22 base ) complete as specified and directed in replacement of existing CFL globe light fittings. Make:- Havells code No. LHFOFUE1T21W012 or equivalent in Philips/ Crompton / Wipro / Bajaj.

S&F in replacement surface full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 W (2 ' x 2 ') in MS housing with opal diffuser with colour temp 6000K, Luminous efficacy-> 100/watt,CCT> 5500 k,CRI- 80,Power factor >0. 95,THD < 10 with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/ connection terminals including aluminium frame for fitting the same complete all as specified and directed by Engineer in charge. Make:- Crompton Cat No. LCTLSNE-36-FO-CDL or equivalent in /Havells /Philips/wipro/ Jaquar.

S&F in replacement 2 x 2 Recess ceiling light luminaire 36 watt with human centric light , CRCA light sheet housing comprising of LEDs connected in series parallel, high quality opal diffuser , wide CCT range with dimmable option for various application. operated through mobile application , wireless operation with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/ connection terminals including aluminium frame for fitting the same complete all as specified and directed by Engineer in charge. Make :- Bajaj cat part No. BZRSQL R 36 W LED HCLOD SD or equivalent in Crompton/Havells /Philips/wipro.

S&F in replacement LED Downlighter 30W with colour temp 6000K , Luminous efficacy-> 100/watt,CCT> 5500 k,CRI- 80,Power factor >0. 95 deep recessed antiglare led downlight for general and accent lighting with premium white reflector matches the ceiling and accentuates the architecture of the area without compromising the light output including driver and all connected accessories with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals and adjusting rings for fixing etc complete all as specified and directed by Engineer in charge. Make :- Crompton Cat No. CDR-216-30-57-SL or equivalent in Havells/Philips/Wipro/Jaquar.

S&F in replacement High efficacy 1x1 LED 18 watt Recessed full lit luminaire with glare free unifrom illumination with longer life and less maintenance and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals ,Luminous efficacy > 100/w, CCT .5500 k,CRI > 80,PF .0.95 complete all as specified and directed by Engineer in charge. Make :- Crompton Cat No. LCTLRNE-18-CDL or equivalent in Havells/Philips/Wipro/Jaquar.

S&F in replacement suspended luminairies 36W LED 4 feet with colour temperature 6000K having extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including 02 Nos suspension kit, CRI -80,THD- < 10 %,Lumens >100,Powerfactor-.0.92,Internal surge voltage- 2kv, complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make :- Crompton Cat No. LCLP-36-CDL or equivalent in Havells/Philips/Wipro/Jaquar.

S&F in replacement LED spot light ideal for wardrobes,furniture lighting,displays& interior decorations Luminous efficacy-> 100/watt,CCT> 5500 k,CRI- 80,Power factor >0. 90 including connecting up 3 core copper conductor cable of suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make :- Crompton Cat No. LCSSR-6-CDL or equivalent in Havells/Philips/Wipro/Jaquar.

S&F in replacement LED flat downlighter 12W in round profile, Luminous efficacy-> 100/watt,CCT> 5500 k,CRI- 80,Power factor >0. 90 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make :- Crompton Cat No. LCDSPLN-R-12-CDL or equivalent in Havells/Philips/Wipro/Jaquar.

S&F in repair arcus under water light 18 watt, hard chrome plated stainless steel with silicon sealed glass, offers colourful illumination for waterbodies in architectural and landscape areas complete all as specified and directed by Engineer in charge. Make :- Crompton /Havells/Philips/Wipro/Jaquar.

S&F LED linear batten with smart sensor, inbuilt sensor based smart LED auto dimmable batten , made from industrial engineering grade extruded polymer housing ,opaque glare free diffuser, pre wired with all accessories complete all as specified and directed by Engineer in charge. Make :- Shakti Cat No. SZSLBMX010-iSS or equivalent in Crompton/Havells/Philips/Wipro/Jaquar.

S&F in repair single pole and neutral enclosure with two pin and plug and socket complete with one single pole MCB, AC 240 Volts, 20 Amps complete all as specified and directed by Engineer in charge.

S&F in repair triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp 240 Volts complete all as specified and directed by Engineer in charge.

Dismantling of ceiling fan of 1200 mm sweep of any make and model, removing the defective burnt windings, rewinding the same with appropriate gauges of super enamelled copper winding wire including varnishing, drying and re assembling, refixing, making electrical connection complete in all respect all as directed.

Dismantling of exhaust fan of 300/450 mm sweep / wall mounted fan of any make and model , removing the defective burnt windings , rewinding the same with super enamelled copper winding wire of appropriate gauge including varnishing, drying and re assembling , re fixing, making electrical connecting complete in all respect all as directed.

S&F in repair arcus under water Light 18 watt, hard chrome plated stainless steel with silicon sealed glass, offers colourful illumination for waterbodies in architectural and landscape areas complete all as specified and directed by Engineer in charge. Make :- Crompton /Havells/Philips/Wipro/Jaquar.

S&F LED linear batten with smart sensor, inbuilt sensor based smart LED auto dimmable batten , made from industrial engineering grade extruded polymer housing ,opaque glare free diffuser, pre wired with all accessories complete all as specified and directed by Engineer in charge. Make :- Shakti Cat No. SZSLBMX010-iSS or equivalent in Crompton/Havells/Philips/Wipro/Jaquar.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 meter deep below ground level, connected to 25x4 mm size galvanized iron strip as earthing strip by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including provn of necessary excavation and earthwork in any type of soil, PCC pit, RCC cover and 20 mm bore medium grade watering pipe, water funnel with GI wire mesh, 40 mm bore medium grade protection pipe, common salt, charcoal dust, returning filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified and directed by Engineer in charge.

M&L for earth continuity conductor or main earthing lead fixed to wall on epoxy /OMC insulators or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 25 x4 mm galvanised iron strip complete all as specified and directed by Engineer in charge.

All as per item No.101 above but copper strip 20x3 mm size complete all as specified and directed by Engineer in charge.

ROTECH ENGINEERS AND BUILDERS

Benchmark Engineers and Contractors