REPAIRING OF AWC CENTRE AT KALIRSTHAN CODE-19328260306 UNDER PADAMATI-II GRAM PANCHAYAT WITHIN JURISDICTION OF MAYNAGURI BLOCK.

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)………

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.(a) 1:2:4 proportion

MORTAR(1:4) IN GROUND FLOOR

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Colour washing with "ELLA" with a coat of white wash priming including cleaning and smoothening surface thoroughly : (b) Two coats Details in Bill.

(a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.

(B) Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (b) Two coats Details in Bill

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. Shutter with 25mm thick planks, 19mm thick battens. (i) Sal:Local

Wood work in door & window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron butt hinges & M.S. clamps. (d) Sal: Local. G.F. level:

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : (ii) Two coats (white in shade)

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.

Galvanized corrugated iron sheet work ( Excluding the supporting frame work) fitted and fixed with 10mm dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150mm end lap and one corrugation minimum side lap. In roof With 0.60 mm thick sheet

Supplying, fitting, fixing 0.50 H.P. Pump of (Crompton Greaves Mini Star III) ….. L.S

Electric Wiring and connection charge & other fittings & labour charges for room running water etc. (L,S)

Add GST @ 18 %

Add Cess @ 1%