Repairing of damaged traverse wall in Bldg. No. 225 of TNT Section, at HEF.

Amount

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard / dense soil.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.

Removing building material to distance 1Km beyond the lead included in the rates, including loading, unloading & stacking at the destination

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.

Excavating in trenches, exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading levelling, watering & well ramming in layers not exc 25cm.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in 1:4 mix cement mortar.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in 1:4 mix cement mortar but except stone.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Fair finished formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Reinforced cement concrete (nominal mix) in type B1, 1:2:4 mix in Beams, cantilevers, bressummers, lintels over 1.5m span

S & F of PVC (SWR) pipes single socketed in any length laid along the masonry as weep holes 110mm bore.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:3.

M & L for providing cement concrete type B0, 1:2:4 mix using 12.5 mm graded aggregate in coping over masonry wall.

M & L for preparing of surfaces and applying two coats of cement based paint on external wall surfaces.

Ambaji Corporation (BID ID -801896)