Miscellaneous MS structural works inside factory

Amount

Dismantling old/ damaged MS structural works such as roof cladding partitions, bracings, platforms, stairs, handrails etc of all sizes and shapes at all locations and elevations up to 10m from ground level, carefully lowering by standard methods, conveying the dismantled materials by hand, cart/ tempo van/ lorry and stacking the items category wise at places pointed out inside factory compound within a lead of 50m, including all labour charges, hire of tools, machineries, pipelines, cables, all safety measures such as safety net safety belt, helmet, goggles/ face shield, safety shoes, gloves, life line for hooking safety belt etc approved by engineer in charge and safety engineer including obtaining safety permit approval from concerned sections before starting the work on each day provided at contractors risk and cost and approval of TCC.

Fabricating, erecting, setting, bolting/ welding in position MS structurals with new MS angles, channels, plates, rods, ISMB sections, joists etc for roof works, inspection ladders, platforms, handrails, racks etc as per the instruction of engineer in charge including straightening, marking, cutting, drilling, welding, bolting etc all as per standard practices and scrapping thoroughly to remove dust, painting one coat of primer and finish paint of two coats of chlorinated rubber including all labour charges, hire for tools, welding sets, gas cutting equipments, derricks, tackles, pipelines, cables,all cost of consumables such as welding rods, cutting gas, all safety measures such as safety net safety belt, helmet, goggles/ face shield, safety shoes, gloves, life line for hooking safety belt etc approved by engineer in charge and safety engineer including obtaining safety permit approval from concerned sections before starting the work on each day provided at contractors risk and cost and approval of TCC. (MS section, MS bolts, nuts, washers and paint will be issued free of cost by TCC.)

Fabrication and erection of Lightweight structurals such as GI tubular sections and GI pipes of all sizes for roof purlins, truss members, stairs, handrails, platforms etc using standard GI sections as supplied from stores, including painting two coats of chlorinated rubber paint above one coat of primer, setting and fixing to position by welding/ bolting to the required line, level and slope over MS section up to a height of 20 m from ground level, provided that all safety precautions to men and materials are at contractor's risk and cost including all labour charges, hire for tools, welding sets, gas cutting equipments, derricks, tackles, pipelines, cables,all cost of consumables such as welding rods, cutting gas, all safety measures such as safety net safety belt, helmet, goggles/ face shield, safety shoes, gloves, life line for hooking safety belt etc approved by engineer in charge and safety engineer including obtaining safety permit approval from concerned sections before starting the work on each day provided at contractors risk and cost and approval of TCC. (GI tubes, pipes and paint will be issued free of cost by TCC.)

Roofing, side cladding, with galvalume sheets of required size and shape in required position at all locations and height up to 10 m from existing ground level, using new roofing sheets, (JSW/ TATA/ EVEREST, grey colour 0.5mm thick) by drilling holes for bolting and fitting roofing sheets in position with suitable GI bolts, nuts, GI washer etc and covering bolt holes using sealants, roofing compound etc, including all cost of sheets, bolts, nuts, washer etc, all labour charges,hire for tools, standard lifts, devices, scaffolding charges all protection works to workers, materials, equipments, machineries, cables etc provided at contractor's risk & cost, approved by engineer in charge and safety engineer including obtaining safety permit approval from concerned sections before starting the work on each day.

Engaging labourers for executing miscellaneous items of works at all locations and elevations, including all benefits payable, hire for tools, all safety precautions etc provided at the risk and cost of contractor. Man Mazdoor

MANIKANDAN C

K M Shajahan

ASHOKAN M S ENGINEERING WORKS

Devi Engineering Works