Construction/Extension of tubewell rooms near B.No. 102 and near CBA Lake etc.

Amount

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2010.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2010.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2010

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2010

M/L brick work in cement mortar 1: 4 straight or curved on plan exe. 6m mean radius with sub class ‘A’ brick all as specified in MES SSR 2010.

Providing & laying autoclaved aerated cement blocks masonry with 150mm/230/300mm thick AAC blocks in superstructure above plinth level up to floor V level with RCC band at Sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately).

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2010

S/F 2nd class Hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2010.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. In MES SSR 2010 all as sp. in MES SSR 2010.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2010.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2010.

S/F of 2nd class Hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters all as specified in MES SSR,2010.

S/F 2nd class Hard wood, plain framed & paneled factory made shutters (Two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I ) kiln seasoned and chemically pressure treated all as specified in MES SSR,2010.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2010.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2010.

M/L screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:3 for laying floor finishes all as specified in MES SS 2010.

M/L glazed ceramic tiles 300 mm x 300mm or 450mm x 300mm x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR, 2010 ( colored tiles) including screed 15-20 mm thick.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2010 ( colored tiles).

S/F Aluminium Frame Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for windows, doors & partly fixed, partly openable frame complete all as specified in MES SSR 2010.

Providing & fixing 10-12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface (RCC ceiling surface) with design as per requirement and approved by the Engineer-in-charge all as specified in MES SSR, 2010

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

Putty filling two coats application of one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

M/L painting 2 coats with synthetic enamel on wood work/steel/brick work and one coat of primer all as specified in MES SSR, 2010

Bidder Name

Amount

R.N.Company(GSTN-06AJPPK4897H1ZK)

M/s A N BUILDERS(GSTN-06AADFA9365M1Z2)

om jagdish builder(GSTN-06AAEFO2949J1Z1)

s s builders(GSTN-NA)

M/s A N BUILDERS

om jagdish builder

s s builders

s s builders

R.N.Company

om jagdish builder