Improvements and Constructions of bath rooms at South and West side of General bathrooms at Cellar floor floor foir KKC in Nandakam Rest House at Tirumalsa

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead of brick work.

Demolishing and disposal of unserviceable materials within 100 metres lead of unreinforced cement concrete up to 15cms thickness.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work in Ordinary soil-Manual means upto 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Conveyance of excavated surplus earth/debris to a distance of 2 KM's from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution etc., complete..

Cement Concrete (1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing,cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) - Grade M15 using 20 mm ( 0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing,cost and conveyance of all materials etc., complete.

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cum,6mm HBG Crushed metal 0.320cum,sand 0.400cum and cement 350Kgs with water cement ratio of 0.53(185.50 ltrs/cum of CC) etc., from any source confirming to the relavant ISI standard including cost and conveyance of all mterials like cement, fine aggregare (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges,centering charges,shuttering charges for finished item of work (APSS No. 402)

--do-- 50mm thick precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards with necessary reinforcement, Excluding cost of steel and tying of grills, centring charges but including cost of necessary form work etc., complete as directed by the department.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36 mm Fe 500 grade/Fe-500D grade (as per IS 1786 - 1979) for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

- do- in C.M( 1:5)12 mm thick

- do- in C.M( 1:5)20 mm thick

Finishing the sides of walls with 1st quality glazed red or white full body ceramic wall tiles of size 300X600 and thikness between 6-8mm 1st quality conforming to IS:13711,IS:13712,IS:13630 (part 1 to 15 ) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10Sqm shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). ( Note: Unless otherwise laying complete of flooring is finished, no pre-payment shall be made for the tiles agnist supply)

Flooring with supply of Non-Skid red or white full body ceramic floor tiles of size 300x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711,IS:13712,IS:13630 (Part 1 to 15) of any colour and finish in all shades and designs (as per manufacture specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sqm. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying complete of flooring is finished, no pre-payment shall be made for the tiles agnist supply)

Supply and fixing of 10mm wide PVC edge beading including cost and conveyance of all materials and incidental charges etc., complete.

Painting priming coat with ready mixed Cement primer (water thinnable) for old plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

- do-cement primer for exterior grade - 2 for old work

Painting Two coats for External walls -New with Acrylic Emulsion paint exterior grade with silicon additives having VOC(Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work for external walls.

Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.

Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebate of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & Minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.

Supply of the following Anodised Aluminium fittings for doors and windows including cost and conveyance of all materials etc., complete with ISI Mark IS 204"

Anodised Aluminium tower bolts 10 mm dia with ISI Mark IS 204 of 150mm long

Anodised Aluminium Tower Bolts of 10mm dia with ISI Mark IS 204 of 200mm long

Anodised Aluminium IS 205 of Butt hinges 100mm long

Anodised Aluminium IS 208 of Door Handles 150mm long

Anodised Aluminium Aldrop Sliding door bolts size 16mm x 250mm (3T-pieces)

Hire charges of the core drilling machine/ Drilling Equipments

Supplying and fixing in position M.S tubes & pipes of all diameters as per ls-1161 of approved size design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the same with Two coats with Synthetic enamel paint in all shades grade - I having VOC (Volatile Organic Compound) content less than 50 grams / liter approved make and colour over a Primary coat (Red oxide metal primer) (total three coats) including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Zinc coating Z120 GSM. Tensile strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution. (original coil shall be of make TATA blue scope JSW) Note:- Galvalume sheet of 300 Mpa is to be used for crimping (Curved portions)

Supply, laying and jointing in position the following dia metre of P.V.C / S.W.R pipes & fittings (as ISI standard)- 6 kg/ Sq.cm(Type-B) including cost of labour charges for laying, fixing and commissining the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends ,plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice

-do- 110mm dia 3M double socket pipe

-do- 75mm dia 3M double socket pipe

Supply of following dia metre of PVC SWR pipe fittings ( U.V resistant) as per approved make with BIS standards

110mm dia Palin Bend 87.5 Degree

110mm dia Door bend 87.5 Degree

110mm dia Single Tee

110mm dia Single Y

110mm dia Double Y

110mm dia Coupler

110mmX 75 mm dia Reducer

75mm dia Palin Bend 87.5 Degree

75mm dia Door bend 87.5 Degree

75mm dia Single Tee

75mm dia Single Y

75mm dia Double Y

75mm dia Coupler

Supply of 4" (101.6 mm ) Nahany Trap (with out Jali with inlet) of UV resistant - UPVC / SWR pipe fittings (as per BIS standards)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") Flowgurard SDR 11 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

28.60 mm OD pipe SDR - 13.5

22.20 mm OD pipe SDR - 11

34.90 mm OD pipe SDR - 13.5

Supply & fixing towel rod (CP) of 24'' long and 3/4'' dia

Supply & fixing NP soap dish heavy type with NP Screws

Supplying & fixing NP coat hook

Supply and Fixing CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make 400 grams of seiko/senoir

Supply and Fixing angle stop cock 12.7 mm (1/2") dia first quality Indian Make heavy duty 400 grams of Seiko/senoir

Supply & fixing of round jalis

Supplying and fixing of scaffolding to structure ornamental works and sculpture works including cost and conveyance of all materials such as Casurino poles, Bamboos, country wood planks, nails and coir puri to provide working plot form covered with coconut leaves mats to protect the working item from sun rays and rains and also provided ladder up to roof level strongly. After completion of work scafolding should be removed carefully as directed during the execution etc., complete.

-do- up to 20'-0'' height

-do- up to 20'-0'' to 30'-0'' height

-do- up to 30'-0'' to 45'-0'' height

-do- up to 45'-0'' to 60'-0'' height

Supply and fixing of stainless steel SS304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing to present seamless finishing etc., complete as directed during execution

Supply of 304 grade stainless steel fly proof wire mesh of 26 gauge