PROVISION OF DEFICIENT TOILET BATHROOM FACILITIES AND ELECTRIC SUPPLY WITH FITTINGS AT CAMP SITE AND ADDITION ALTERATION TO FLOORING AT ASSEMBLY AREA OF NAVAL KG SCHOOL AND SYSTEM LAB AT ECE FACULTY AT INA EZHIMALA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified and as directed.

Material & Labour for Cement concrete type D2 1:4:8. in foundations, filling and mass concrete all as specified and as directed.

Material & Labour laterite block masonry set and jointed in CM 1:4 all as specified and as directed

Pre- painted galvalume aluminum zinc coating GI based corrugated steel flat / curved sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws all as specified and as directed.

Material & Labour Steel work in tubular trusses in any shape flat or curved section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and as directed.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Supply & Fix Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

Material & Labour for hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n. exc 15cm thick, watered and rolled/rammed to a true surface (broken stone or boulder) all as specified and as directed.

Material & Labour for PCC 1:4:8 type D2 75 mm thick in flooring all as specified and as directed.

Material & Labour for PCC 1:2:4 type B1(using 20 mm graded aggregate) 70 mm thick and finishing even and smooth using extra cement all as specified and as directed.

Supply and fix vitreous china, wash down water closet (EWC) P type star white with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

Supply & Fix 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets all as specified and as directed.

Supply & Fix PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 and necessary fittings on walls/ceiling or laying in floors including cutting chases, chipping masonry to conceal pipes and concealing the pipeline inside wall and finishing the surface with CM 1:4 even and smooth and painting to match the adjecent laterite surfaces complete all as specified and as directed.

Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 and necessary fittings on walls/ceiling or laying in floors including cutting chases, chipping masonry to conceal pipes and concealing the pipeline inside wall and finishing the surface with CM 1:4 even and smooth and painting to match the adjecent laterite surfaces complete all as specified and as directed.

Supply & Fix PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls or floors including fixing arrangements to walls, making holes on walls to take pipes through, filling the joints and matching it with adjecent surfaces with cement and paints complete all as specified and as directed

Supply & Fix PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls or floors including fixing arrangements to walls, making holes on walls to take pipes through, filling the joints and matching it with adjecent surfaces with cement and paints complete all as specified and as directed

Supply & Fix 110 mm bore PVC SWR junction single tee with acces door complete all as specified and as directed.

Supply & Fix 75 mm PVC (SWR) floor trap plain including jointing with solvent cement all as specified and as directed.

Supply & Fix 110mm bore PVC SWR bend with acces door complete all as specified and as directed.

Supply & Fix CP grating of 110 mm da including jointing with solvent cement all as specified and as directed

Supply & Fix Chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.

S & F 110 mm PVC (SWR) gully trap setting and jointing with solvent cement all as specified and as directed.

Supply and fix vitreous china wash basin star white including waste coupling chromium plated, fixing brackets, waste pipe, cutting for and pinning in ends of brackets complete all as specified and as directed.

Supply & Fix 15 mm long body fancy type Bib tap standard of PTMT any colour high pressure screwed for CPVC pipe and fixed all as specified and as directed.

Supply & Fix 15 mm Angle stop valve of PTMT any colour high pressure screwed for CPVC pipe and fixed all as specified and as directed.

Supply & Fix 20 mm Stop valve long shank and cup concealed type of PTMT any colour high pressure screwed for CPVC pipe and fixed all as specified and as directed.

Supply & Fix 15 mm shower and arm of PTMT any colour, shower arm of 195 mm long and 45 degree bend fixed to CPVC pipe all as specified and as directed.

Supply & Fix Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified and as directed.

Supply & Fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) all as specified and as directed.

Supply & Fix 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm all as specified and as directed. make : FESTELor equivalent

Supply & Fix fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr all as specified and as directed. Make: FESTELor equivalent

Supply & Fix 100mm mild steel butt hinges, cold rolled medium weight all as specified and as directed.

Supply & Fix 150mm Aluminum anodised barrel tower bolts of extruded section all as specified and as directed.

Supply & Fix 125mm extruded aluminium anodised alloy handles fabricated type all as specified and as directed.

Supply & Fix 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed.

Supply & Fix ISI marked triple layer 100% food grade rotational moulded Polypropylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, connecting to both inlet and outlet pipelines with necessary connections and connectors all as specified and as directed..

Rendering 15mm thick on fair faces of brick work or concrete surfaces - Cement plaster 1:6 to be finished even and smooth without using extra cement all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces - Cement plaster 1:4 to be finished even and smooth without using extra cement all as specified and as directed.

Material & Labour for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggreate) finished even and smooth without using extra cement as in plinth protection all as specified and as directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces including washing, rubbing down and stopping of distempered and painted surfaces all as specified and as directed.

Material & Labour for preparation of new surfaces and appling two coat of acrylic emulsion paint (interior grade) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on walls and ceilings all as specified and as directed.

Material & Labour for Concrete bed to drain pipes for 150mm bore pipe including packing under, and haunching against the sides of pipes after they are laid and tested; in and tested all as specified and as directed.

Material & Labour mat finished coloured Virified Ceramic tiles (square/ rectangular) 600x 600x10 mm thick fixed on floors with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge. Note: Epoxy should be filled to a depth equal to the thickness of tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 15mm thick screed bed in CM 1:6 all as specified and as directed.

All as per item No 46 above but on vertical surfaces such as skirtings, dados etc. and including 10mm thick rendering as backing coat in CM 1:4 all as specified. Note: The ends of corner tiles at all horizontal and vertical joints shall be mitered/provided with PVC corner strips whichever found aesthetic and approved by GE at ground,to match the edges properly.There should not be any voids behind the any tiles all as specified and as directed. Note: The epoxy to be filled to a depth equal to the thickness of tiles. The rates quoted shall be deemed to be all inclusive.

Material & Labour reinforcement concrete (Nominal mix) Type B1 1:2:4 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

All as per Srl Item No 48.00 here-in-before but in chajjas

Material & Labour TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed..

All as per Srl Item No 50.00 here-in-before but 6mm to 8mm dia

All as per Srl Item No 50.00 here-inb-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Material & Labour for formwork to rough finished sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.) complete all as specified and as directed..

Material & Labour for formwork to rough finished concrete surface of chajjas, troughs and similar items including edges complete all as specified and as directed.

Material & Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Material & Labour for formwork to edges of rough finished concrete slabs exc 5cm but not exc. 10cm wide complete all as specified and as directed.

Material & Labour powder coated Anodised aluminium frame for doors,windows (3 tracks), ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Material & Labour powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fitings such as peg stays 150mm long, hinges tuype B-21 suitable handles complete all as specified and as directed..

Supply and Fix sheet glass 5.50mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified and as directed.

Material & Labour for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard /dense soil all as specified and as directed.

All as per Srl Item No 60.00 here-in-before but exc 1.5 m and n.exc 3.00m deep and getting out in hard /dense soil all as specified and as directed.

Material & Labour for PCC (1:3:6) type C-2 (using 40mm graded stone agg) for foundation including finishing complete all as specified and as directed by Engr-in-charge all as specified and as directed.

Material & Labour for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar,complete built in CM 1:6 all as specified and as directed.

Material & Labour for Sand filling ssing 'M' sand under floors or in foundations including watering and consolidation all as specified and as directed.

Material & Labour for providing reinforced precast cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slab set in CM (1:6) complete all as directed by Engr-in-charge all as specified and as directed.

Material & Labour for rendering 15mm thick in CM 1:3 on stone masonary surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge all as specified and as directed.

Material & Labour for rendering 10mm thick in CM 1:3 on stone masonary surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

Supply & Fix 110mm dia PVC (SWR) junction single, (Single T) equal or unequal all as specified and as directed.

Supply & Fix 110mm dia PVC (SWR) vent cowl all as specified and as directed.

Material & Labour for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed of drain for 150mm bore pipe incl packing under , and haunching against the sides of the pipes after they are laid in and tested all as specified and as directed.

Material & Labour for PCC 1:3:6 type C-I using 20mm graded stone aggregate as in benching & coping to Masonry complete all as specified and as directed.

Material & Labour for old size brickwork with sub- class ‘B’ bricks laid dry as in brick bats all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

Supply only Liquid water proofing compound all as specified and as directed.

Material & Labour 40mm Damp proof course PCC 1:2:4 type BO using 12.50mm graded stone agg to horizontal or vertical urfaces including necessary formwork all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard /dense soil all as specified and as directed.

Material & Labour for Cement concrete type B2 1:2:4. in foundations, filling and mass concrete all as specified and as directed.

Material & Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

Material & Labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Gde E- 165) all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed.

Material & Labour for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) for levelling course complete all as specified and as directed.

Material & Labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm screed bed in CM 1:6 (including hacking out of floor surfaces if necessary)complete all as specified and as directed.

Taking down mechanically operated rolling shutters (n. exc. 12 sqm area of clear opening each shutter) including hood covers, suspension shaft, guiding rails completed all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Material & Labour for Pre-cast cement concrete block masonry type C1 1:3:6 (using 20 mm aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and as directed.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (Work in foul condition and in shaft) complete all as specified and as directed.

Material & Labour for Rendering 15mm thick on fair faces of PCC Block, brick work or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with liquid water proofing compound all as specified. Note - Liquid water proofing compound measured & paid separatly all as specified and as directed.

Material & Labour for 10mm thick rendering in CM 1:6 on fair faces of PCC block, brick work or concrete surfaces finished fair and even all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or aluminium partition/ insulation boards/slabs/ blankets, any thickness, including cover fillets at any height. The rate shall be inclusive of scaffolding needed for the work all as specified and as directed..

Fixing only aluminium partition upto 1.5 height consisting of prelaminated particle board and powder coated aluminium frame fixed to wall and floor with screws and joining cleats complete all as specified and as directed.

Supply and Fix Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to Aluminium (extruded section) body complete all as specified and as directed.

Material & Labour 9 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws/rubber beeding to aluminium frame work complete all as specified and as directed.

Providing and fixing modular 04 cluster L shaped cubical work station of seating capacity for 4 persons with each cubical table edge to shape of size 1.5m x 1.5 m and 0.75 m high. Top and bottom of table made of 19mm thick BWR ply finished with 1mm laminate and 2mm PVC edge banded finishing, grommet cap. The height of the partition will be 1.20 m and aluminium extraction will be 1.5 mm thick duly powder coated. The panels made of BWR ply and finished 1 mm thick laminate board fabric. The panel supports internal cable for electric power, data connections including floor mounted modular pedastal unit with 03 drawers height upto table top including all accessories & fittings and complete accessories and fittings comple all as specified and as directed.

Providing and fixing L shaped executive desk with side return, drawers, and cable management with dimensions Main desk : 1800 mm (L) x 800mm (W) x 750mm (H) and side return 1200 mm (L) x 500mm (W) x 750mm (H). Work top of table made of 25 mm thick pre-laminated board and 2mm PVC edge banded finishing.Left or Right return option and integrated cable management ports, lockable drawers (3 drawer pedastal) complete all as specified and as directed.

Material & Labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint interior grade ( Apex ultima of Asian paints or equivalent make) on wall all as specified and as per manufacture's instructions all as specified and as directed.

Material & Labour for preparation of external new wall surfaces and applying two coats of santex matt finish including applying external primer all as specified and as per manufacturer instructions.

Material & Labour for preparation of new wall surfaces and applying two coats of acrylic emulsion paint interior grade (Apcolite of Asian paints or equivalent make) over a coat of emulsion primer over a coat of wall putty of uniform finish complete all as specified and as directed.

Material & Labour colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size, concealed / semi concealed/open suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches or sockets regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly all as specified for the following:- Note i. Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. ii. Same size wire shall be used for phase, neutral and earth conductor. iii. The wiring shall be done strictly by proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads.

(a) One Light/ fan/bell point controlled by one switch

(b) 5 Amps socket point on independent board

(c) 5 Amps socket on same board

All as per item no 02 here in above but 2.5 sqmm for 5/15 Amps socket on independent board all as specified and as directed.

Supply & Fix ceiling rose 3 terminal/PVC/polycarbonate isolated body all as specified and directed by Engineer in charge

Supply & Fix modular switch one way 6 Amps 1 module all as specified and directed by Engineer in charge Make Legrand/Crabtree

Supply & Fix modular socket 6 Amps 2/3 pin 2 module. Make Legrand /Crabtree

Supply & Fix modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose, Make Legrand /Crabtree

Supply & Fix modular switch one way 16 Amps 1 way 1 module, Make Legrand /Crabtree

Material & Labour sub main wiring using 2 runs of 2.5 Sq mm FR PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed/open conduit along with 1 run of 2.5 sq mm PVC insulated copper conductor FR cable as earth lead connected to common earth dolly complete all as specified including taking down the unserviceable wiring. Note : One run of PVC conduit, 2 runs of 2.5 sqmm PVC insulated copper conductor and 1 run of 6 sqmm PVC insulated copper conductor cable will be measured as one unit all as specified and as directed.

Supply & Fix SPN 12way MCB DB double door 240 volts complete all as directed by Engr-In-Charge

Supply & Fix MCB SPN 32Amps type 240V, 10KA C curve for fixing in DB complete all as directed by Engr-In-Charge

Supply & Fix MCB SP up 6 to 32A in DB as directed by Engr-In-Charge

Supply and fixing LED tube lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED tube light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver,holder including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & Fix LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket to mount on wallcomplete. with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated heavy duly galvanised steel strip armoured LT1100 volt grade with aluminium conductors of size 10 sqmm 4 core complete all as specified and directed by Engr-in-charge.

Material & Labour for spreading riddled earth for cushioning of the UG cable in trenches all as specified and directed.by Engr-in-charge

Supply and lay PCC un reinforced cable cover of size 250 mmx150mmx40mm , class LV type I flat for cable protection complete all as specified and as directed.

Material & Labour for Earthing for DBs other machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode complete all as specified and as directed.

Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire. Complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m complete all as specifed and directed by Engr In Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers. complete all as specifed and directed by Engr In Charge.

MUNEER P (BID ID -3345416)

SATHEESAN.T.K (BID ID -3343863)

Gates Infra Construction Co (BID ID -3347625)

TAMS ASSOCIATES (BID ID -3345535)

NRI BUILDERS AND MATERIAL SUPPLIERS (BID ID -3345541)