Construction of 04 Classroom Framed Structure in Different Primary School of Kawant Taluka in Chhotaudepur District.

No. 2023-24 L.C L.C Unit Amount

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

1 excavated stuff upto 50 Meter lead.(B) Dense or hard soil

CH-4 ITEM CODE 04001B PG-46

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

2 and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or hard soil

CH-4 ITEM CODE 04002B PG-46

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

3 complete excluding cost of form work Below Tie beam & Plinth

protection.

CH-5 ITEM CODE 05010AA PG-48

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork and excluding cost

of reinforcement for reinforced concrete work in (A) 15.88 3963.89 39.64 4003.53 Cmt

Foundations, footings,Base of columns and Mass

concrete (Cement Level 290 Kg)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundationand

5 plinth in Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash

CH-6 ITEM CODE 6002CA PG-58

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding

6 20cm in depth consolidating each deposited layer by ramming and

CH-4 ITEM CODE 04006 PG-47

of 20 cm. thickness inculding watering, ramming and consolidation 289.80 286.20 2.86 289.06 Cmt

etc. complete.

CH-4 ITEM CODE 04008A PG-47

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding cost

of reinforcement for reinforced concrete work in (a)

8 Foundations, footings Bases of columns and the like and Mass

conrete work in footing. (Cement Level 380 Kg)

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse

sand :8 hand brocken stone aggregates of 40mm nominal size) in

9 plinth and curing complete excluding cost of formwork.

CH-5 ITEM CODE 05004A PG-49

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding cost

10 of reinforcement for reinforced concrete work in Plinth

Beams. (Cement Level 380 Kg)

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Brick work using common burnt clay building bricks having

crushing strength not less than 35Kg./Sq.Cm. for superstructure in

cement mortar 1:6(1 cement :6 fine sand) including curing etc. 119.76 4991.25 49.91 5041.16 Cmt

complete. (C) Fly Ash Bricks For all heights and all floor

CH-6 ITEM CODE 6002CA +6006C PG-58

Half brick in common brunt clay building bricks having crushing

strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement

12 : 4 coarse sand) (C) Fly Ash Bricks in super structure including

curing etc. complete.For all floors

CH-6 ITEM CODE 6008A2A +6010B PG-59/60

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding cost

13 of reinforcement for reinforced concrete work in Beams for

all floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding cost

of reinforcement for reinforced concrete work in Column Up 21.32 7156.00 71.56 7227.56 Cmt

to Plinth & all floors.. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding cost

15 of reinforcement for reinforced concrete work in Column for

all floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding cost

16 of reinforcement for reinforced concrete work in Slab for all

floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding cost

of reinforcement for reinforced concrete work in sloping

17 slabs & Staircase having thickness more than 10 cm and upto

cm thickness.For all floors. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding cost

of reinforcement for reinforced concrete work in Chhajja for

18 all floors level including finishing with cement mortar 1:3 (

cement :3 Sand ) and curing etc complete. (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

Confirmed to IS-1786 for R.C.C.work including Cutting, bending,

19 binding and placing in position etc. complete.For all floors

CH-5 ITEM CODE 05014C PG-50

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

20 cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

CH-17 ITEM CODE 17001B+17004A PG-89

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

21 mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

CH-17 ITEM CODE 17002A+17004A PG-89

20mm thick sand faced cement plaster on walls above ground

level consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 782.28 326.03 3.26 329.29 Smt

1:1(1 cement 1 sand) watering, curing etc.complete for any Height.

CH-17 ITEM CODE 17009 PG-89

Provinding & applying three coat of 100% acrylic base matt

finishing exterior paint of approved manufacture of required shade

on external surface to give an even shade after throughly brushing 782.28 113.40 1.13 114.53 Smt

the surface free from morter dropping & other foreign matter

Providing & laying 24"x24" vitrified 8mm thick tiles flooring over

20mm (average) base of cement mortar 1:6(1cement:6course

sand) on new surface or fixing on exiting flooring by

adhesivematerial including dismentalling of existing flooring and

24 jointed with colour cement slurry including finish with flush pointing

and cleaning the surface etc. complete for antiskid.(As Per List of

Approved Materials) for Light/Dark shade as per the given pattern.

(Item No- 14021A , Pg No- 85)

Providing and laying 25 mm th. Polish Kota stone slab flooring over

20mm. (average) base of cement mortar 1:6 (1 cement :6 coarse

sand) of L.M. 1:1.5 and laid and jointed with grey cement slurry 96.08 967.05 9.67 976.72 Smt

including rubbing and polishing complet.

(Item No- 14.43 , Pg.No. 84)

Providing & laying cement concrete flooring over 40 mm (average)

thick base of cement flooring 1:2:4 (1cement:2 coarse sand:4

graded stone aggregates 20mm normal size) laid in one layer 349.52 280.35 2.80 283.15 Smt

finished with a floating coat of neat cement curing etc. complete.

(Item No-14.71 , Pg.No. 85)

Providing cement vata (10cmx10cm size)quarter round in cement

mortar 1:1 including neat cement finishing,watering etc. complete ) 45.32 23.45 0.23 23.68 Rmt

Providing & Fixing in position M.S.Angle 40mmx40mmx6mm Angle

frame for door and 35mmx35mmx5mm angle frame for shutters,18

gauge iron sheet of shutters with 4 nos.of hold fasts for door as per

the approved drawong & design including applying a priming coat.(

Providing & Fixing in position M.S.Angle 35mmx35mmx6mm

frame for windows & ventilation 25mmx25mmx5mm angle frame

for shutters, 18 gauge iron sheet of shutters with 4nos. Of hold

fasts for windows & Ventilation as per the approved drawing &

design including applying a priming coat..( Pg No-68)

Providing & fixing M.S. Railing & M.S grill as per approved drawing

30 & design including one coat of red lead paint etc. complete.( Pg 1923.40 101.60 1.02 102.62 Kg

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Painting two coats (Excluding Priming coat) on new steel and other

metal, surfaces with enamel paint, brushing,interior to give an even

31 shade including cleaning the surface of all dirt, dust and other

foreign matter etc,complete

(Item No-19.7 , Pg.No. 93)

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

length. RA

Distempering with dry distemper of approved brand and

manufacture (Three Coats) and of required shade on wall surface

to give an even shade, over and including a priming coat of whiting 1344.28 60.80 0.61 61.41 Smt

after throughly brooming the surface free from mortar dropping and

other foreign matter.

(Item No- 18.38, Pg.No. + 18.40 Pg.No. 91 )

Providing and fixing Chicken mesh jali (22 gauge)30cm wide at the

junction of 2 different surfaces of different material component at

34 the time of plastering to prevent cracking in plaster surface as and 405.04 45.00 0.45 45.45 Rmt

where directed at all floors with all leads and lifts etc.complete.RA

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete Cat.

III ELE R&B 22-23 1-2-1

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following type

36 erected on PVC / Metallic/Wooden box, single mounting base 16.00 699.00 6.99 705.99 Pt.

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III ELE R&B 22-23 1-2-2

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type

accessories Cat. III ELE R&B 22-23 1-2-4

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front plate

38 modules erected on / in wall / ceiling as per pipe erected with 8.00 781.00 7.81 788.81 Pt.

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.(e) in existing pipe

erected flushed on wall/ceiling complete,Cat. III ELE R&B 22-23 1-

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single Cat.III ELE R&B 22-23

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm ELE R&B 22-23 1-3-2

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

41 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded 35.40 60.60 0.61 61.21 Rmt

wire of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq.

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

42 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded 66.40 51.00 0.51 51.51 Rmt

wire of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

mm ELE R&B 22-23 1-4-1

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

43 copper conductor FRLS PVC insulated stranded wire of green 31.20 123.00 1.23 124.23 Rmt

colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mmELE R&B 22-

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of co-extruded polycarbonate

channel with diffuser part in needed opal finish with company

mark/name 160V to 270V, Power Factor more than 0.9, THD <

CCT 3000 K to 6500K,

44 Luminaire efficacy> 85 lumens/watt ,LED 20.00 345.00 3.45 348.45 NO

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.),(A) Tube Light with integral driver,(ii)

18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll ELE

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

volt A.C. 50 Hz 1200 mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod erected with

core flexible wire with earthing.(Make shall be approved by

Engineer in charge) R&B 22-23 5-1-6

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing ELE R&B 22-23

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted

47 in RCC slab with Making the site as original.ELE R&B 22-23 5-2-2 16.00 50.00 0.50 50.50 NO

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

48 DBs should be used of same company of MCB to be used) 4.00 4525.00 45.25 4570.25 NO

suitable for(B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI),(b) sheet steel double

door,(iv)12 way R&B 22-23 3-11-5

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

49 capacity 10 KA to be erected in existing box. confirming to IS 12.00 117.31 1.17 118.48 NO

8828/1996 with ISI Mark Cat.III R&B 22-23 3-10-1(B)

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Cat. III R&B 22-23

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A) 6 to 32 Amp.

Cat.III ELE R&B 22-23 3-10-3

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.ELE R&B 22-23 3-11-4

Providing & erecting Medium Voltage Danger Notice Board sticker

53 as per language suggested by engineer incharge of standard size 8.00 30.00 0.30 30.30 NO

as per IS-2551 ELE R&B 22-23 3-13-3

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

54 confirms to IS : 8828 in existing box having following capacity ,(A) 4.00 350.00 3.50 353.50 NO

6 to 32 Amp. Cat.III ELE R&B 22-23 3-10-2

Erection & connection charges for 16A / 32 A DP as following (b)

55 on polished wooden block.ELE R&B 22-23 3-6-2 4.00 20.00 0.20 20.20 NO

Item SOR 1% SOR+1% Per Estimated

DESCRIPTION OF ITEM QTY

No. 2023-24 L.C L.C Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providind and erecting HOT deep Galvanised iron strip wire 8 TO

Total Rs.

Total Say RS.

I / WE am / are willing to carry out the work at ________ % above / below (percentage should be written in

figures and words) of estimated rates mentioned above. Amount of my / our tender works out as under:

Estimated amount put to tender Rs. ________________

Deduct / Add: _____ % below / above Rs. ________________

Net Amount Rs. ________________

in words _____________________________________________________________

(Please strike out which ever is not applicable)