MISC REPAIR TO SECURITY FENCING BOUNDARY WALL PATH HARDSTANDING GATES ETC AND CLEANING REPAIR REPLACMENT OF DRAIN SEWAGE LINE MANHOLES DRAIN COVERS ETC TO RESIDENTIAL AREA ZONE B AT KWC AREA UNDER GE I RND DELHI

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid dry or any mortar complete all as specified & directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub floors, filling and mass concrete etc complete all as specified

M&L for machine made Rubber moulded precast concrete interlocking paver block (coloured) pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 50mm average thickness sand cushioning complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded) stone aggregate as in bed blocks.coping etc including necessary form work and all as specified.

M&L for Granite stone 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including painting in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L for painting floors of each coat with ready mixed paint, for use on floors complete all as specified and directed.

M&L for preparing newly concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparing old painted concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar 1:4 with Sub class "B' brick including manhole raising, footpath, etc complete all as specified and as directed .

Dismantling Structural Steel Work including doors, gates but excluding framed truss etc all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of exc. 10 cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Dismantling floor, hearth or wall tiles including cement mortor bedding (but not backing), rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic tiles 600x300x7 to 8mm thick for wall cladding, coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in dado over 10mm thick cement mortar in CM (1:4) complete all as specified and directed.

Dismantling Steel Barbed wire any type complete all as specified and directed

S&F Galavanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails/post straing bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or stell pins etc as directed (each line of wire to be measured) complete all as specified and directed.

S&F for Concertina Coil 0.610 m dia (5 Spiral Per Running Meter) Made from 2.5mm dia High tensile string galvansied steel wire of tensile 1500 Mpa with razor shaped barb of 0.5 mm galavnised steel wire of 10mm length and 12mm width and 25mm spacing centre to centre fixed complete all as directed and specified

M&L for Raking out joints/ Pointing to random rubble or polygon rubble uncoursed or brought to courses (work built in cement mortar) complete all as specified and directed

M&L for Raised Pointing to Random Rubble, Uncoursed, or brought up to course in C.M. 1:4 complete all as specified and directed.

M&L for complete removal of existing finishes on wall and applying 2 coat of premium acrylic smooth exterior paint with silicon additives complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying 2 coat of cement based paint over a coat of alkali resistant primer complete all as sppecified and directed.

Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed

M&L 15mm thick rendering in cement mortar 1:4 on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for finishing of walls (newly plastered) with 2 coat of Premium Acrylic Smooth exterior paint with Silicone additives over a coat of primer of required shade complete all as specified and as directed.

M&L for complete removal of existing finishes of wall and for applying two coat of cement base paint on walls complete all as spd and as directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at approved municipal durmuring ground complete all as specified and directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as per direction of Engineer-in-charge.

Cleaning & Clearing of manholes by taking off manhole covers and re-fixing the same after cleaning of any description, underground any depth by removing any type of blockage including de-silting and de-chocking and flushing after cleaning, clearing of manholes. Sludge/ sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MoD land as directed by Engineer-in-Charge, upto 150mm dia sewage lines complete all as specified and directed.

Removal of blockage in between two manholes spacing upto 18 meters of underground sewage line of any type and size upto 200 mm dia by means of mechnical rodding with vibrations/drilling concept. A trolley mounted motorized sewer cleaning machine for the execution of item shall have to be provided by the contractor. Blocked material, slugging obtained during execution of this item shall be removed from the site through trolly mounted motor out of defence land. Sewage line between existing two manholes shall be flushed with combined high pressure water jetting cum suction (vaccum type machine suitably mounted on HCV having facilities of hydraulic applications with suitable size of nozzle pipes. Item shall be executed by the contractor upto satisfaction of the Engineer-in-Charge. No extra claim, whatsoever shall be entertained at any stage. Quoted rate shall be deemed to include all aspects mentioned herein

Maintenance of sewage system SGSW/PVC(SWR)/NP2 pipe including Nahani/floor traps. Soil/waste pipe running on external wall of building and in trenches with fittings, bends, junctions etc, Gully traps, manholes of all description and sewage lines of all sizes upto soak well/MCD drain of sewage system complete in perfect running/flowing order without destruction by removing all blockage in the system including cleaning the floor trap, gully trap. IWC EWC Wash basin, Urinal pots,bottle trap, in kitchen, lobby, bath room, toilets at any height of floor (Maximum G+10 Floor) including pipe line up to the first manhole including maintaining of drain (Bricks/PCC) in running condition by removing all surplus spoil in entire KWC residential area (Zone - B) under GE (I) R&D delhi, complete all as specified.Notes:- (i) Contractor shall deploy minimum 2 safaiwala solely for the maintenance of sewage system against this item alongwith necessary tools and will be required to report AGE B/R office KWC area to collect the complaint slip from concrened JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, contractor shall provide the same to meet the requirements.These Safaiwala / Mazdoor shall not be deployed for any works other than the scope catered for in this item. For the work considered against other items of this Schedule the contractor shall deploy separate sfafiwala / mazdoor in addition to the safaiwala /mazdoor deployed against this item. (ii) Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc (ii) Sludge slurry / sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land. (iv). Solid waste / sludge / silt deposited in the manholes which can not be removed by rodding, shall be ordered under respective item of this schedule and paid accordingly.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement per IS 12592: 2002 with specified of make approved by GE complete all as specified and directed.

Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Precast RCC work (Nominal Mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, man hole cover drain covers Shelves etc and like complete all as specified and as directed.

M&L for Reinforced Cement concrete nominal mix Type B1 1:2:4(20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal and sloping) to rough finished surface of concrete all as specfied and directed.

M&L for TMT bars of 10mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for TMT bars of 8mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only liquid water proofing compound/liquid etc complete all as specified and directed.

Excavation as in trenches in soft/loose soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers nof exceeding 25 cm thick, complete all as specified and directed.

Removing excavated material/Malba to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Dismantling of 150mm bore SGSW or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches complete all as specified and directed.

Supply and laying 150mm dia Salt glazed stoneware drain pipes laid in trenches and jointed with cement mortar 1:1 and spun yarn soaked in neat cement slurry complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed.

M&L for Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150 mm bore SGSW/RCC pipe, complete all as specified and directed.

S&F in repair 110mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed to wall with MS clamps including taking down pipes complete all as specified and directed.

S&F in repair 75mm intermal dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed to wall with MS clamps including taking down pipes complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius 110 mmmm dia including taking down complete all as specified and directed by Engineer-in-Charge

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed

S&F PVC (SWR) bends any radius 75 mmmm dia including taking down complete all as specified and directed by Engineer-in-Charge

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed

Cleaning of roofs ie. removal of vegetables, roots, removal of blockage from mouth of rain water pipes and rubbish off from premises, brooming etc. up to seven stories buildings all as directed.

M&L providing vitreous china ware squatt pan, orissa pattern size 580mm x 440mm white with integral foot rests E (excluding flushing cistem and flush pipe) complete including provn of lime concrete bedding, fixed in repair complete all as specified and directed. Make Hindware/paryware/Cera

Supply & fixing in repairs vitreous china wash down water closet pedstal pattern white including PVC seat cover we aluminium hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe and PVC valveless syphonic action type flushing cistem low level 10 Ltr Capacity, white, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed by Engr-in-Charge.

Desilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed.

S&F grating droom of size 100/125/140 mm CP in round or square shape for out let of water etc complete all as specified and directed.

Supply and fixing factory made prepainted chequered cement concrete coloured tiles 300mm x 300mm x 22-25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed

M&L for machine cut Kota Stone slab as in flooring/landing of stairs, 18-20mm thick laid over and including thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and polishing complete all as specified

Note: (i) Contractor or his accredited representative will report to JE (Civil) at 9.00 AM morning & 1.30 PM at complaint cell of AGE B/R Cub division at KWC Residential Area on all working days to collect complaints job slip by concerned JE. (ii) Contractor or his accredited representative will report daily to JE (Civil) at 5.00 PM evening for updating of complaint status. (iii) For Srl no 32, 33, 34 complaint will be rectified within 24 hrs (Clock Hours) , Srl no 45, 57, 58, 59 complaint will be rectified within 72 hrs (Clock Hours) wrt date & time (AM/PM) as mentioned in complaint job slip. (iv) All complaint will be considered as rectified with entire satisfaction of Engineer-in-charge & users. (v) In case of non rectified complaint within prescribed time, the penal recovery/penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per 24 Hours (Clock Hours) or part thereof up to rectification of complaint shall be recovered from the contractor’s dues in RAR/FB. time will be considered for panel /penalty recovery excluding Sunday & closed holidays. Contractor or accredited representative will update daily status of each complaint in register (sample provided by Sub divn) (vi) Contractor or accredited representative shall be available during attending of complaints. (vii) Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs. (viii) Complaint slip book in triplicate with machine made srl no, date, time (AM &PM), BOQ item No. for given & returned and register in standard format as per sample kept in AGE B/R Office will be provided by the contractor for recording day to day complaints during currency of contract period & Cost of required complaint slip book, documents, stationery etc is included in this item. (ix) All T&P required for attending the complaints shall be provided by the contractor without any extra. (x) The cost of transportation (to and fro) and necessary T&P / equipment and safety gear shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

m/s Kailash Chander (BID ID -3404827)

SAWARIYA ENGINEERS AND CONTRACTORS (BID ID -3404613)

Sree Ram Enterprises (BID ID -3403430)