Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC 00 IN FRONT OF SHIVPURI HOTEL NEAR KOTHI NO 14 SHIVPURI MADHYA PRADESH 473551 | SHIVPURI | MADHYA PRADESH | 473551 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.5 L+₹4.4 L (10.5%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹47.3 L+₹5.1 L (12.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.1 L+₹6.0 L (14.2%)Rejected-Finance JAVERI BUNGALOW AREA KAVERI HOTEL LINE NH PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.1 L+₹6.0 L (14.2%)Rejected-Finance 33 NATIONAL CHAMBERS NEAR CITY GOLD CINEMA ASHRAM ROAD AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹84,000
Closing Date
8 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Navy Porbandar
GE Navy Porbandar Tija Mile Porbandar
PROVISION OF SERVICING BAY FOR LIFE RAFT SERVICING AND CO2 CHARGING BAY AT NAE AND ONE TOILET NEAR BUILDING NO. P-120 AT NOFRA UNDER GE NAVY PORBANDAR
2024_MES_638020_1
9228/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Navy
₹84,000
Yes
31 Aug 2024
18 Jan 2024
10 Feb 2024
18 Jan 2024
8 Feb 2024
1 Feb 2024
18 Jan 2024 - 31 Jan 2024
Amount
Surface dressing n.exc. 15 cm deep in hard/dense soil including cutting of bushes, sapling etc. complete.
Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in Hard / dense soil complete all as specified.
Excavation in trenches in hard /dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in soft/disintegrated rocks, complete all as direced by Engr-in-Charge.
Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site
Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.
Removing excavated soil n exc. 1.5 km but not exceeding 5 km depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling, floors, sub floors and mass concrete plinth beam .complete all as directed by Engr-in-Charge.
M&L for Treating bottom & sides of Excavation at the rate of 5 litres of emulsion per square metre of surface area
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in sub floors complete all as directed by Engr-in-Charge.
M&L 75 mm thick PCC, type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.
M&L PCC 150 mm thick, type C-2, 1:3:6 (40mm graded aggregate) as in sub-base, complete all as directed.
M&L Treating the AntiTermite Treatment for flooring at the rate of 7.5 litres of emulsion per square metre of surface area
M&L Treating the AntiTermite Treatment for soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)
M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M&L for RCC type M-30 (Design Mix) (20 mm graded aggregate) as in foundations, plinth beams, bases for column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (Design Mix) (20 mm graded aggregate) as in column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (Design Mix) (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 M-30 (Design Mix) (20 mm graded aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 M-30 (Design Mix) (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed.
M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as directed by Engr-in-Charge.
M&L for form work to sides of columns, square, rectangular, complete all as directed by Engr-in-Charge.
M&L for formwork to chajjas,troughs and similar items including edgeson flat and finished surface.
M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.
Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
S&F Mild steel TMT bars 8mm to 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
M&L stone walling porbandar type block masonary in cm 1:6, brought up to courses, complete all as directed by Engr-in-Charge.
M&L 15 mm thick External Plaster in CM 1:4 mixed with water proofing compound, finished even and smooth (without using extra cement).
M&L 15 mm thick Internal plastering in CM 1:6 finished even & smooth without using extra cement and applying sagol finish complete.
M&L Internal Plastering 5 mm thk to Ceiling in CM 1:3 complete
Supply only Integral waterproofing compound complete all as specified and as directed.
M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Polymeric membrane will be measured and paid separately)
M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c ) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane.
M&L for preparation of new plastered surface and applying two coat of acrylic external emulsion paint over a coat of primer complete as specified and directed.
M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering.
M & L for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash
M&L for Hard core, using broken stone or boulders of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.
M&L Rubber sheet 5mm thk with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and as directed by Engr-in-charge.
S&F powder coated aluminium sliding windows/ventilator, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-charge.
S&F Plain solid, straight chowkats and frames of second class shard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 3097 (Part I), kiln seasoned and chemically pressure treated all as directed.
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described over 10 cm width or grith and painting with 2 coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, Complete all as specified and directed.
S & F 200mm long mild steel barrel tower bolt of extruded section and fixed, Complete all as specified and directed.
S & F 150mm long mild steel handles cast type, Complete all as specified and directed.
S & F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded Complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified & directed by Engr-in-charge.
S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by Engr-in-charge.
S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm length complete all as specified & directed by Engr-in-charge.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified & directed by Engr-in-charge.
S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed.
S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified.
Gypsum board 12mm thick in ceiling board fixed with screw including aluminium anodised snap grid frame for false ceiling including hanging arrangement complete all as specified and as directed.
M&L PCC (1:3:6) type C1 using 20mm graded stone aggregate block masonary in CM (1:6) complete all as specified and directed.
M&L Rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for Applying two coats of Oil bound distember/water based distemper over a coat of primer including applying Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer in Charge
M&L for Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified.
M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 OR 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M & L for Non Skid Ceramic coloured with 2mm to 3mm spacer bar (colour & shade as approved) tiles non skid of size 400x400x7mm-8mm (Exe 0.11 Sqm but n.Exe 0.18 Sqm) thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Supplying and laying of bore 25mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.
Supplying and laying of bore 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.
Supplying and laying of bore 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.
S&F (Angle Valve) 15mm bore size chromium plated fancy type complete all as specified.
S&F Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed.
S&F CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed complete all as specified and as directed.
S & F Table top Vitreous china wash basin, of required size including waste pipe and waste coupling of chromium plated , brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug complete all as specified and directed
S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)
S&F 10litres capacity PVC flushing tank, syphonic action type, high / low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, including taking down / dismantling old unserviceable flush tank (any type) and disposing off complete all as specified and as directed.
S&F swivel shower 100mm dia with arm 15mm bore, 195 mm long with bend of 45 degreee with flange of PTMT any colour for fixing with 15mm pipe
S&F Health faucet (ABS chrome plated) with 1 mtr long flexiable tube & wall hook complete all as specified.
S&F fiber glass reinforced plastic (FRP) door frames of three legged of cross section 90 x 45 mm having single rebate of 32 x 15 mm to receive shutter of 30 mm thick. The laminate door frame moulded with fire retardent grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block of 2nd Class Hardwood in all the three legs. The frame shall be covered with fibre glass from all side M.S stay shall be provided at the bottom to sedy the frame complete as per direction of Engineer - in - Charge.
S&F 30 mm thick glass fiber reinforced plastics paneled door shutter of required colour & approved colour and manufactrures made with fire retardent grade unsaturated polister resin,moulded to 3mm thick FRP laminate for forming hollow rails & styles with wooden frame & suitable blocks of seasoned wood inside at required places for fixing of fittings along with MS tube frame of 19 gauge all around the styles & rails duly coated with steer primer cast monolithically with 5mm thick FRP laminate forpanels & conforming to IS:14856:2000 including fixing to frames with necessary hinges handles , tower bolts etc . The shade & colour shall be approved by Engineer-in-Charge
S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square not exc 0.5 sq. m in each pane all as specified and as directed
M&L for 20mm Granite (of any type) work table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite
M&L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate( WPC Shall be measured seperately) complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius laid in trenches of nominal bore 75 mm complete all as specified and directed
S&F PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 75mm complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) bends any radius laid in trenches of nominal bore 110mm complete all as specified and directed
S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia
M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed
M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement
S&F of rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I
S&F of 20mm ball valves high pressureof PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed min. wt 20mm-210gm Make "Paryag/polytuf"
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for pipe manhole forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150mm dia pipe complete all as specified and directed.
M&L reinforced concrete pipes, 150 mm dia, class NP2, laid and jointed complete with collars
M & L Concrete bed 1 : 3 : 6 Type C2 for drain pipes , including packing under, and haunching against the sides of pipes after they are laid and tested; in 150mm dia bore of pipe.
Material and labour point wiring with 1.5 sqmm (nominal cross section area) single core PVC insulated unsheathed cable of 1100 Volts grade (FRLS) multistrand with copper conductor drawn through and including non metallic, rigid PVC conduit of adequate size with all fittings and conduit accessories concealed in wall/ceiling/floor/roof etc. including 1.6 mm thick sunk mild steel terminal box with 3mm thick plastic laminated sheet top cover, cadmium plated iron screws for housing the switches, socket outlets including provision of 1.5 sqmm green in colour PVC insulated copper conductor single core multistrand (FRLS) for earth continuity conductor and connected to common earth dolly all as specified for the following:-
One light point control by one switch
One ceiling fan/exhaust fan control by one switch
Ditto all as per item No. 95.00 above but for One 3 pin socket 5 Amps on the same board with other switches
Ditto all as per item No. 95.00 above but for One 3 pin socket 5 Amps socket as independent board
Ditto all as per item No. 95.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor.
Ditto all as per item No. 95.00 above but for One bell/buzzer point controlled by one push button
S & F Modular switch 1 way 6A, 1 module all as specified and directed by EIC.
S & F modular socket, Socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC.
S & F Socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC.
S & F Modular switch 1 way 16A, 1 module all as specified and directed by EIC.
S & F Modular bell push 6A, 1 module all as specified and directed by EIC.
S & F Buzzer, Ding dong AC 230V Single pole all as specified and directed by EIC.
Supply and fix ceiling rose three terminal ll as specified and directed by EIC.
Supply and fixing Modular fan regulator120Watt, 2- module , AC 240 Volts complete.
Supply and fix ceiling fan 1200 mm sweep 230 V AC, 5 Star rated with brushless direct current motor (BLDC) complete including connecting up with 3 core cord flexible from ceiling rose to fan etc all as specified and directed by Engr-in-charge.
S & F of LED tube light fittings 4 feet 1x20 Watt ,220V, AC decorative box type with driver,4 V Surge protetction & High Voltage protection upto 440 V ,holder including LED Tube light connecting up with 3 core flexible cppper conductor cable with sutable size from ceiling rose complete all as directed by Engr-In-Charge.
Supply and fixing of LED street light fitting 35 Watt,230 V AC outdoor type with high pressure die aluminium housing and heat resistant complete with driver , lamp, with impact and corrosion resistanct including thermal management in multiple optics, including suitable size mounting bracket , clamps ,nut,bolts complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.
S & F MCB DB double door TPN 4 Way complete all as specified and directed.
S & F MCB SP 6-32 Amps 'C' Series complete all as specified and directed.
S & F MCB TPN 63 Amps 'C' Series complete all as specified and directed.
S & F MCB TP 32 Amps 'C' Series complete all as specified and directed.
S & F MCB DB made of sheet steel, powder painted with bus bar, neutral link, earth bar and Din rail , 240Volts SPN with 4 way Double door IP-43-IK09 protection grade
S & F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps
Supply and fix triple pole and earth enclosure with a three pin and earth plug and socket complete with including one triple pole MCB 32 Amps complete all as specified and directed.
S & f sub main wiring of size 6 sq mm x 4 core (FRLS) along with earth wire of 6 sq mm x 1 core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor throgh concealed PVC conduit of suitable size complete all as specified and directed by Engr-in-Charge.
M&L Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2003 (part-I)
Supply, install, testing & commissioning hi wall split unit air conditioners inverter type indoor/outdoor complete with electric driven single phase, copper tube condensor coil, cordless remote control of capacity of 2.0 TR with minimum 5 star rated EER 3.2 including outdoor unit mounting stand complete all as specified and directed.
Supply and fix voltage stabilizer single phase 50 cycles AC supply designed for input voltage of 170 V to 250V and out put voltage stablised between 215V to 240V of capacity 4 KVA including necessary mounting arrngement complete all as specified & directed by Engr-In-Charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and directed.
Supply and fix PVC pipe 20 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories for drain out condensing water of split AC including cutting of floor/opening of hole in wall and making good after laying of pipe etc to match the existing surface complete.
S & f sub main wiring of size 4 sq mm 2 core (FRLS) along with earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC casing caping of suitable size complete all as specified and directed by Engr-in-Charge.
Supply, laying of cable XLPE Insulated galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.
S& F XLPE insulated armoured and pvc sheated heavy duty electric cable size 3.5 core , 25 Sqmm cross sectional area with aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete Note- rate is inclusive of cable gland & cable lugs Make- Havells/FINOLEX/CCI
S& F laying of Double Walled Corrugated (DWC) HDPE pipe of 40/32 mm outer/inner dia size of conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge Make:-ASTRAL TELEREX /eqivalent as approved by GE
S& F in replacement of laying of Double Walled Corrugated (DWC) HDPE pipe of size 50/38 mm outer/inner dia conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge Make:-ASTRAL TELEREX /eqivalent as approved by GE
Supply & fix Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia along with necessary clamp duly painted with silver aluminuim paint nut bolt etc, including PVC bend of required size for cable entry at bottom of pole complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete including connecting up with 3 core flexible wire from ceiling rose to exhaust fan cover with PVC sleeve all as specified & directed by Engr-In-Charge
M&L of earthing complete with galvanized steel pipe electrode of size 40mm bore medium grade 2.25 mtr length buried directly including chemical powder for earthing and preferably vertically in ground with top edge not less than 1.25 mtr below the normal ground level and connected to galvanised earth strip 25x4mm as eartlung lead all as shown in electrical plate No. 2 of SSR Part-I complete all as specified and directed.
AADESH CONSTRUCTION
BABUBHAI BHIMABHAI PANDAVADRA
OM ENTERPRISE
shree chamunda enterprise
SANVI ASSOCIATES
Vastushilp Building Designer
JAY BHARAT METAL SUPPLIERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .