Repairs of motor of waterworks for Municipal Council Dharashiv

Rewinding Motors, Monoblock, Submersible pumps, Fans etc

Rewinding the motor of table / pedestal / wall bracket / cabin fans of all type and makes including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing for original speed and consumption with guarantee for 1 year including transportation from site and back

Rewinding the motor of the ceiling fan 900mm of all types, makes and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc.& testing for original speed and consumption with guarantee for one year

Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types ,makes and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year.

Rewinding the motor of the Exhaust fan 900 / 1400 RPM 300 mm of all types, makes and over hauling including minor repairs, lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year

Rewinding of electric motor above 5 H.P. upto 7.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 7.5 H.P. upto 10 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 10 H.P. upto 12.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 12.5 H.P upto 15 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 15 H.P. upto 20 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 20 H.P. upto 25 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of electric motor above 25 H.P. upto 30 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

Rewinding of submersible pump motor in Borewell of all types and makes up to and including 5 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

Rewinding of submersible pump motor in Borewell of all types and makes above 5 H.P. up to 25 H.P with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase up to 1 H.P. of all types with Required alignment of the shaft and testing the same

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 1.5 H.P. to 2 HP of all types with Required alignment of the shaft and testing the same

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 3 HP to 7.5 HP of all types with Required alignment of the shaft and testing the same..

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 10 H.P. of all types with Required alignment of the shaft and testing the same

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase 12.5 H.P.to 20 H.P. of all types with Required alignment of the shaft and testing the same.

Replacing the existing driving end bearing of original make for electric motor A.C single phase / 3 phase above 20 H.P. to 30 H.P. of all types with Required alignment of the shaft and testing the same

Replacing the existing ball bearing of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & testing the same.

Supplying and replacing No-Volt-Coil for motor having DOL starters up to 7.5 H.P.

Supplying and replacing No-Volt-Coil for motor having DOL starters from 7.5 H.P. to 10 H.P.

Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 12.5 H.P. to 15 H.P. motor.

Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 15 H.P. to 25 H.P. motor.

Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 20 H.P. to 30 H.P. motor.

Supplying and replacing No-Volt-Coil for motor having Star-Delta Starter from 25 H.P. to 35 H.P. motor.

Supplying and replacing No-Volt-Coil from 30 H.P.to 90 H.P. motor starter.

Supplying and replacing thermal over load relay for motor starter 40 H.P. to 50 H.P.

Supplying and replacing thermal over load relay for motor starter 60 H.P. to 90 H.P.

Supplying & replacing contactor for DOL motor starter from 7.5 H.P. to 10 H.P.

Supplying and replacing contactor for motor starter suitable for above 30 H.P. to 40 H.P.

Supplying and replacing contactor for motor starter suitable for 75 H.P. to 90 H.P.

Supplying and replacing contactor for motor starter suitable for 100 H.P. to 125 H.P.

Replacing suitable capacity motor of water pump of air cooler of any capacity and type in lieu of old one.

New Submersible Motors and accessories

Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 120 to 390 LPM discharge at 55 to 11 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying and erecting minimum Three & above star rated submersible pump set of 3 KW/4 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 200 to 750 LPM discharge at 29 to 7 m head & discharge & delivery Pipe of Size-75 mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying and erecting minimum Three & above star rated submersible pump set of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 100 to 400 LPM discharge at 132 to 27 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

तेर पंप हाऊस 120 हॉ.पॉ.विद्युत मोटार , स्टार्टर दुरुस्ती

120 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्तीत व वर्कशॉप कामासह वाहतुकीसह

120 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोलफिटींग करने व वर्कशॉप कामासह

120 हॉ.पॉ. मोटार काढुण दुस-या असेंब्लीवर बसविणे

120 हॉ.पॉ. मोटारीच्यास केबलला कॉपर लग्जस बसविणे व स्टाहर्टरच्या लग्जत बसविणे

120 हॉ.पॉ.पंपाची बॉऊल असें ब्लील खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्तीव करने वाहतुकीसह

पुर्ण एम.ई.आय स्टर्टर रिपेअरींग करने व खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह

अॅटो ट्रासफॉर्मर रिवायडींग करने व खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह

स्टार्टरच्या केबलला व मोटरच्या केबलला अल्युमिनीयम लग्ज बसविणे

मोटार पॅनल बोर्डातील साहित्य दुरुस्ती करने

उपळा बुस्टफर 100 हॉ.पॉ. विद्युत मोटार दुरुस्ती

100 हॉ.पॉ. मोटार रिवायडींग करने खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने वाहतुकीसह

100 हॉ.पॉ. मोटारीस बेअरींग बसविणे वर्कशॉप काम करने व खोलफिटींग सह व वाहतुकीसह

100 हॉ.पॉ. मोटारीच्या केबलला अॅल्युकमिनियम लग्ज बसविणे

100 हॉ.पॉ. मोटारीस बेअरींग बसविणे शॉप्ट झीज झालेला गाळा भरणे, बुशींग तयार करुन बसविणे वर्कशॉप कामासह व वाहतुकीसह

100 हॉ.पॉ. मोटारीस व स्टार्टरला कॉपर लग्ज बसविणे व त्यास लागणारे साहित्यासह

रुईभर पंप हाऊस 125 हॉ.पॉ. विद्युत मोटार, स्टार्टर दुरुस्ती

125 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्ती् करने वर्कशॉप कामासह

125 हॉ.पॉ.पंपाची बॉऊल असेंब्ली खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने

125 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह

100 हॉ.पॉ. व 125 हॉ.पॉ. मोटारीचे टर्मीनल प्लेट (कनेक्शन प्लेट) बदलणे

125 हॉ.पॉ. मोटारीच्या आतील कनेक्शनसाठी कॉपर लँग्ज सॉल्डर करुन बसविणे

पुर्ण जे.एम.पी स्टा्र्टर दुरुस्ती करने

जे.एम.पी स्टासर्टरचे फिक्सु अॅड मुहींग कॉटेक्ट बदलणे

एन.ओ.सी कॉईल बदलणे.

जे.एम.पी स्टालर्टरचा अॅटो ट्रान्स फार्मर रिवायडींग करने खोलफिटींग वाहातुकीसह

स्टार्टरच्या केबलला अॅल्युमिनीयम लँग्ज बसविणे

ओ.सी.बी. 300 अॅम्पीअर दुरुस्ती करने

मेन पॅनल बोर्डातील दुरुस्ती करने मेन स्वीच व इतर साहित्य् दुरुस्ती करणे ओ सी बी चे कॉटेक्ट कॉईल व इतर साहित्य बदलून दुरुस्ती करुन चालु करुन देणे

रुईभर पंप हाऊस 125 हॉ.पॉ. विद्युत मोटार, स्टार्टर दुरुस्ती

125 हॉ.पॉ. विद्युत मोटार रिवायडींग करने काढणे बसविणे दुरुस्ती् करने वर्कशॉप कामासह

125 हॉ.पॉ.पंपाची बॉऊल असेंब्ली खोलणे व फिटींग करने वर्कशॉप काम करुन दुरुस्ती करने

125 हॉ.पॉ. मोटारीस बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह

100 हॉ.पॉ. व 125 हॉ.पॉ. मोटारीचे टर्मीनल प्लेट (कनेक्शन प्लेट) बदलणे

125 हॉ.पॉ. मोटारीच्या आतील कनेक्शनसाठी कॉपर लँग्ज सॉल्डर करुन बसविणे

पुर्ण जे.एम.पी स्टा्र्टर दुरुस्ती करने

जे.एम.पी स्टासर्टरचे फिक्सु अॅड मुहींग कॉटेक्ट बदलणे

एन.ओ.सी कॉईल बदलणे.

जे.एम.पी स्टालर्टरचा अॅटो ट्रान्स फार्मर रिवायडींग करने खोलफिटींग वाहातुकीसह

स्टार्टरच्या केबलला अॅल्युमिनीयम लँग्ज बसविणे

ओ.सी.बी. 300 अॅम्पीअर दुरुस्ती करने

मेन पॅनल बोर्डातील दुरुस्ती करने मेन स्वीच व इतर साहित्य् दुरुस्ती करणे ओ सी बी चे कॉटेक्ट कॉईल व इतर साहित्य बदलून दुरुस्ती करुन चालु करुन देणे

रुईभर जलशुध्दीकरण केंद्र 40 हॉ.पॉ. विद्युत मोटार दुरुस्ती

40 हॉ.पॉ. विद्युत मोटार रिवायडींग करने खोलफिटींग करने वाहातुकीसह

40 हॉ.पॉ. विद्युत मोटारीस बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह

40 हॉ.पॉ. पंपास बेअरींग बसविणे खोल फिटींग सह वर्कशॉप कामासह

40 हॉ.पॉ. मोटारीच्या केबलला कॉपर लग्ज् बसविणे

40 हॉ.पॉ. स्टार्टरला कॉपर लग्ज बसविणे

संपुर्ण र्स्‍टाटर दुरुस्‍ती करने

र्स्‍टाटरचा एक कॉटेक्‍ट नादुरुस्‍त झाल्‍यास बदलणे

अॅटो ट्रान्‍सफार्मर रिवायडींग करने

र्स्‍टाटर केबलला लग्‍ज बसविणे

40 हॉ.पॉ.मोटारीचे मेन पॅनल बॉक्‍स मधील मेनस्‍वीच दुरुस्‍ती करने व इतर दुरुस्‍ती

20 हॉ.पॉ. मोनो ब्‍लॉक मोटार रिवायडींग करने

20 हॉ.पॉ. मोनो ब्‍लॉक मोटारस वारनीसिंग व सर्विसिंग करने

20 हॉ.पॉ. मेन ब्‍लॉक मोटारीचे निकामी झालेली बेअरींग काढुन नवीन बेअरींग बसवणे

20 हॉ.पॉ. मोनो ब्‍लॉक मोटारीचे बुशींग रोटर शॉप्‍ट वर्कशॉप करने.

उजणी पंपहाऊस व खांडवी पंप हाऊस मोटर, स्टार्टर दुरुस्ती

300 ते 400 एच.पी. मोटर रिवायडिंग करणे.

300 ते 400 हॉ.पॉ. मोटारीच्या आतील कनेक्शन वायरचे कॉपर लग्ज जळलेले नविन लग्ज सोल्डर करून बसविणे

300 ते 400 हॉ.पॉ. ची बॉउल असेंब्ली खोलणे व दुरूस्ती करून फिटींग करून चालू करून देणे

300 ते 400 हॉ. पॉ. मोटारीस नादुरूस्त झालेली बेअरींग खोल फिटींग करून बसविणे वर्कशॉप कामासह

300 ते 400 हॉ. पॉ. मोटारीचे जळालेली कनेक्शन प्लेट काढून नविन बसविणे

300 ते 400 हॉ.पॉ. फुली ऍ़टोमॅटीक स्टार डेल्टा स्टार्टर ( किर्लोस्कर कंपनी ) नादुरूस्त झालेले दुरूस्ती करून देणे

300 ते 400 हॉ.पॉ. ABB कंपनी HTS फूल्ली ऍ़टोमॅटीक स्टार डेल्टा स्टार्टर नादुरूस्त झालेले दुरूस्ती करून देणे

300 ते 400 एच.पी. फुल्ली अटोमॅटीक स्टार डेल्टा स्टार्टरचा अटो ट्रॉन्सफार्मर रिवांयडींग करणे

ACB - 1600AV दुरूस्ती करणे

मेन पनॉल बॉक्स मधील दुरुस्ती करणे

हातपंप दुरुस्ती, बोअरवेल दुरुस्ती ईतर साहित्य

Supplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete

Supplying and erecting high density polythene pipe ISI mark 40 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.

Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete

Supplying and erecting non return valve 25 mm dia in position made of gun metal complete.

Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete

Supplying and erecting 65 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting 75/80 mm dia. gun metal sluice valve at position with necessary materials complete

हातपंप बोअरमधुन काढणे व दुरुस्तीकरुन बोअरमध्ये टाकणे

हातपंपाचे सिलेंडर दुरुस्त करणे

हात पंपाचा नविन ओटा तयार करणे (सर्व साहित्यासह)

जी. आय. पाएपास थ्रेडींग करणे ( 2 ईंच पर्यंत)

जी. आय कपलींग ( 2 ईंची पर्यंत)

बोअरवेल मधुन मोटर काढणे ब परत बसविणे