Renovation and Misc. civil work at all subdivision offices under Palitana division under Bhavnagar Circle.

Name of work: Renovation and misc. civil work at all subdivision offices under palitana Division under

Bhavnagar circle.

Sr No. PARTCULARS OF ITEM RATE UNIT AMOUNT

1 Demolition of Brickwork and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

2 Removing and scraping of old deteriorated plaster of any

thickness fromm wall /R.C.Cmember including stacking

of serviceable material and disposal of unserviceable 132.00 20.16 Smt

from site of work with all lead and lift

3 Dismentling doors,windows, ventilator etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them 4.00 194.71 Each

within all lead and lift.(ii)Not Exceeding 3 Sq.M. in area.

4 Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

5 Dismantling santtary fittings like wash basin, W.C.pan

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

6 Removing dry or oil bound distemper by a washing and

scraping and sand papering thewall surface smooth

including necessary repairs to scratches complete.

7 Removing dry or oil bound distemper by a washing and

scraping and sand papering thewall surface smooth

including necessary repairs to scratches complete.-on

8 Scraping oil paint from steel and other metal surface and

making the surface even (with Hand Scraping.) 32.00 52.49 Smt

9 Brickwork using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1-Cement : 3.00 4268.05 Cmt

5-fine sand) (B) Conventional

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

35Kg/Sq.Cm. in Cement mortar 1:4 (1 Cement:4-coarse

sand) in Superstructure (B) Conventional

11 Providing 15mm thick cement plaster insinglecoat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even 24.00 198.10 Smt

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

12 Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two

level and finished even and smoothin (i)Cement mortar

1:3 (1-cement:3-sand)

13 20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

thick backing coat of C.M.1:3 (1-cement :3-sand) and 132.00 347.10 Smt

8mm thick finishing coat of C.M.1:1 (1-cement:1-sand)

14 Providing cement vata (10cm. x10 cm. size) quarter

round in cement mortar 1:1 including neat cement 10.00 24.04 Rmt

finishing, watering etc. complete.

15 P&L24"x24"vitrified 8mm thick tile flooring over 20mm

(average) base of cement mortar 1:6(1cement:6 coarse

sand) on newsurface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade

16 Providing and laying coloured glazed tiles of the size

300mmx200mmx8mm / 300mmx450mmx8mm in

skirting,risers of steps and dedo on 10mm. thick cement

plaster 1:3 (1cement : 3 coarse sand) & jointed with

white cement slurry.

17 Providing and fixing fully glazed/partly glazed Single door

shutter made, frame of 10.15cmX4.45cm aluminum

section, and Shutter-Top & vertical section of

8.5cmX4.45cm size and bottom section of 11.40X4.45cm

size, using 5mm thick "TRIVENI" or HB4 plain glass

glazing deep rubber gasket with locking arrangement, all 6.00 4080.00 Smt

fixtures & fastening of anodized section with all labours

& materials etc. complete as per drawing & as directed

by EIC Complete as per drawing and as directed by E.I.C..

18 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size

63.50x38.10x 1.95mm, @Wt1.094Kg/Rmt,horizontal two

track member size 61.85mmx31.75mmx1.20mm@wt. of

0.695Kg/mt, vertical member of

size61.85mmx31.75mmx1.30mm@ wt. of 0.659Kg/mt

with sliding shutters of horizontal member size

40mmx18mmx1.29mm@wt. of0.456Kg/mt, vertical

member of size 40mm x 18mm x [email protected]

0.456Kg/mt,@Wt.0.457Kg/mt with 5mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

19 Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe (SCH-40) for coldwater including fittings

as approved by Engineer In Charge.Pipe shall be fixed on

the wall with the help of clamp at every two metre C/Cor

shall be concealed as directed including necessary 20.00 71.93 Rmt

fittings etc. including testing of pipe and joints and fixing

the samewith adhesive solvent, including cost of all

20 Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe (SCH-40) for coldwater including fittings

as approved by Engineer In Charge.Pipe shall be fixed on

the wall with the help of clamp at every two metre C/Cor

shall be concealed as directed including necessary 20.00 90.93 Rmt

fittings etc. including testing of pipe and joints and fixing

the samewith adhesive solvent, including cost of all

21 Providing laying and jointing in true line and level 32mm

dia.U.P.V.C. Pipe (SCH-40) for coldwater including fittings

as approved by Engineer In Charge.Pipe shall be fixed on

the wall with the help of clamp at every two metre C/Cor

shall be concealed as directed including necessary 20.00 117.97 Rmt

fittings etc. including testing of pipe and joints and fixing

the samewith adhesive solvent, including cost of all

22 Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia. 1.00 416.47 Each

23 Providing & fixing to wall, ceiling, floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes

incl. joining with approved solution& all fittings like 22.50 312.00 Rmt

bend, tee. Y bend plug bend with water tight joints (

Finolex or equivalent for rainwater etc. - 110 mm

24 Providing and fixing wash down water closet (European

type,W.C.Pan)with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1(1-Cement :1

fine sand) (Seal andcover to be measured and paid for

separately) (A) vitreous China Pattern :(i) in white colour

25 Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.

(A)White earthenware flat back or corner type size

26 Providing and fixing PVC SWR Nahni trap IS14735 for

drain - 100mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread 6.00 594.29 Each

down or hinge dgrating including the cost of cutting and

making good the walls.

27 Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame

of 300mmx300mm size(insid with standard 6.00 1279.40 Each

weight.(i)Square mouth traps. (A) 100mm x 100mm

28 Providing and fixing screw down bib taps of following

size.(A)Brass screw down bib tap polished bright. (i) 9.00 184.98 Each

29 Providing and fixing wash basin with single hole for pillar

tap with providing and fixung 15mmC.P. brass quarter

turn pillar tap, capstan head screw down high pressure

with screws, shanks and back nutswith C.I. or M.S.

Brackets painted white paint including cutting holes and 6.00 2550.00 Each

making good the same including C.P. brass waste and

waste Pipes - vitreous china.-Flat back washbasin 550 x

400 mm. Size - in colour.

30 Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

Wall painting (twocoats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly 93.00 83.98 Smt

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

32 Wall painting (twocoats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth. in

33 Applying One coat of primer of approved brand and

manufacture on exterior wall surface to give an even

shade including thoroughly brushing the surface free 101.00 28.00 Smt

from mortar dropping and other foreign matter and sand

papered smooth.

34 Finishing wall with weatherproof exterior emulsion paint

on wall surface (twocoats) to give an required shape

even shade after thoroughly brushing the surface to 101.00 120.93 Smt

remove all dirt, and remains of loose powdered

materials.etc complete

35 Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

brushing to give an even shade including cleaning the 32.00 58.76 Smt

surface of all dirt, dust and other foreign matter.

36 Providing and laying kotah stone slab 25 mm thick in

riser of steps, dedo and pillars laid on 10mm thock

cement mortar 1:3(1- cement : 3coarse sand ) and

jointed with grey cement Slurry mixed with pigment to 51.00 1045.80 Smt

match the shade of slab including rubbing and polishing

etc. completed, kotastone- 25mm thick

37 Steelwork welded in builtup sections framed work

including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint.(A In beams and joists,

channels angles Tees, flats, with connecting plates or 250.00 90.18 Kg

anglecleats as in main and crossbeams. Hip and jack

rafters, purlins conneted to common rafters and the like

38 Pro. And fixing single layer waterproof gypsum board

12.5 mm thick sections using waterproof board of

size1220mmx1830mmx8.0mm suspended by GI

suspender channel of size 25mmx3mm with

intermediate channel of size 18 mmx40mmx0.8mm at

1220mm center to center ceiling section of size

40mmx35mmx0.55mm at 457mmc/c and perimeter

channel A of size 20mmx27mmx30mm x0.5mm at edges

& drops incl. paper taps and sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound top coat

on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as

39 Providing & Fixing corrugated G.I. sheets roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer. filled with

white lead complete-excluding the cost of purlins,

Rafters and Trusses. 0.60MM THICK (24 Gauge)

40 Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles tobe laid over cement mortar 1:3 to plain or slope

and to betempered to bring mortar creme out upto

surface usingwhite cement including rounding off

junctions and extendingthem upto 15 cm along the

wall,clearing with water and oxalic

acid etc. as directed

41 Providing B.B. Masonry inspection chamber (MANHOLE)

of approved size including light type C.I. Cover with

frame, necessary excavation bottom concreting of .C.C.

(1:3:6) 150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in C.M.(1:3) inside

& to all exposed faces up to 300mm. below ground level,

curing etc., including disposal off surplus excavated earth 5.00 6467.47 No.

up to radius of 300 mt. including 3 coats of white or

colour wash to all exposed finished surface etc. complete

as directed by E.I.C., (B.B.MASONRY UPTO 1000mm.

DEPTH.)--300x300mm clear size

42 Providing B.B. Masonry inspection chamber (MANHOLE)

of approved size including light type C.I. Cover with

frame, necessary excavation bottom concreting of .C.C.

(1:3:6) 150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in C.M.(1:3) inside

& to all exposed faces up to 450mm. below ground level,

curing etc., 450X610 mm including disposal off surplus 2.00 8187.64 No.

excavated earth up to radius of 300 mt. including 3 coats

of white or colour wash to all exposed finished surface

etc. complete as directed by E.I.C.(B.B.MASONRY UPTO

1000mm. DEPTH.)--450X610 mm clear size

43 Providing 2500mm internal diameter & 3.0 Mt. Deep

soak pit including excavation in all types of soil & soft

rock & CC(1:3:6) bedding, 300 mm thick below masonry

and 450mm thick B.B Masonry in CM(1:6) up to 600mm

height, 350mm thick for further 600mm and 230mm

thick for remaining height honey combed, plastering in

CM(1:3) outside up to 1.5 Mt height and 100mm thick

M200 RCC slab with 600x600mm C.I.HEAVY duty cover

with frame, with necessary reinforcement as per design

& C.I Vent pipe 1800mm long with B.B masonry pillar 1.00 77018.180 No.

350x350x450 plastered all around filling with 40 to

50mm size brick bats up to 1.5 Mt depth, including

16mm dia M.S’U’ shape steps, refilling including disposal

of the surplus excavated earth up to the lead of 500mt.

Radius including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by

44 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure polythene

pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -160 mm Dia.

In words: Rs. Nine Lacs Ninety Four Thousand Four Hundred Twenty Four and Zero Paisa Only

The bidders are requested to submit price – bid (Schedule – B) on-line only and not to submit the price bid in

physical form. This is mandatory. If price bid is submitted in physical form, same will not be opened and only on -

line submitted price bid will be considered for evaluation.