REPAIR TO STEEL FURNITURE (PART-A) AT ARMY AREA JODHPUR UNDER GE (ARMY) CENTRAL

Amount

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L preperation of old surfaces of ALMIRAH MED STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Locking Device, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round of pipe as a one spot) of broken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side or Rear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Bar, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying One Coat of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

M&L ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMS size 35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying one coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L SEAT FRAME made out of Second Class Hardwood of CHAIR CB STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed.

M&L BACK FRAME made out of Second Class Hardwood of CHAIR CBA STEEL W/O ARMS, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMS size 35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.

S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.

S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.

M&L BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.

M&L GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.

M&L HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

M&L Moulded PVC/wooden saet and back of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD (Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

M&L DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

M&L LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

M&L aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.

M&L Mild Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L welding of broken part of HOT FOOD TROLLEY as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces , complete all as specified and as directed.

M&L Mild stainless Steel HANDLE (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 50mm in size suitable for Hot Food Trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Hinge, complete all as specified and as directed.

M&L Mild Wheel without stoper provision (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel , complete all as specified and as directed.

M&L Mild Wheel with stoper (as approved) of Hot food trolley and fixing as shown on Drawing No. HFD including taking out unserviceable Wheel, complete all as specified and as directed.

M&L Seat of CHAIR WRITING and S&F of complete Seat including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L Back of CHAIR WRITING and S&F of complete Back including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.

M&L HANDLE of CHAIR WRITING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx), fixing one End and Other End welded to CHAIR WRITING, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed.

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106 & FD-1038, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL as shown on Drawing, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L welding (full round of angle as a one spot) of broken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (Black Colour) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer , complete all as specified and as directed.

M&L Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L SEAT of FORM WITH BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

M&L BACK of FORM WITH BACK made of single plank of teak wood of size 1800x150x19mm as shown on Drawing No. FD-78 including taking out unserviceable seat, complete all as specified and as directed.

M&L forf Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACK as shown on Drawing No. FD-78 necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

M&L SEAT of FORM WITHOUT BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed.

M&L for Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

M&L TOP of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified and as directed.

M&L removing/scrapping old worn out Paint from TEAPOY VARANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.

M&L welding (full round on pipe as a one spot) of broken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.

M&L Complete Removing of unservicable long rail and Fixing new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg.

M&L Complete Removing of old unserviceable short rail and making of 2 Nos short rails from long rails obtained from item No. 1 (a) and threading the both ends of short rails and fixing in position complete.

M&L Complete Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 1 (b) and threading the both ends of legs and fixing in position complete.

M&L Complete Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing.

M&L Complete Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing.

M&L Complete Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50 mm wide weight 140grams per 10 runnning metere, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.50. kg complete all as directed

M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed.

M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed.

M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed.

M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD/MAP/18 including taking out unserviceable Locking Device, complete all as specified and as directed.

M&L LOCK (MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Lock, complete all as specified and as directed.

M&L Mild Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Handle, complete all as specified and as directed.

M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD/MAP/18 including taking out unserviceable Hinge, complete all as specified and as directed.

M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD/MAP/18) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.

L.BHIMSEN

PRAFUL ENTERPRISES

Shri Maruti Trading Co.

SK INDUSTRIES