Supply, Erection, Testing, and commissioning of 66kV equipment’s & materials on Turnkey basis including civil works for 66kV Substations and associated transmission lines (OH only)(Package-1 i.e., Anjar Circle)

Name of work :Civil BOQ for the work of "66kV Class EPC Package -1 for 05 nos. of 66kV substations for

Construction of Control Room Building, Foundations, Cable Trench, Compound Wall, RCC Road, metal

spreading & Misc. civil works at various substation under jurisdiction of Anjar Circle."

SCHEDULE-B:- FOR CIVIL WORKS

DESCRIPTION UNIT APROX. QTY.

[A] EXCAVATION, FILLING AND EARTH WORK

Clearing and grubbing Substation land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal

1 of unserviceable materials outside of Substation land as per instruction of E.I.C. includes all tools nad SMT

tackles, equipments, transportation, loading and unloading etc completed.

Earth work in cutting in all sorts of soil and soft/hard murrum & soft rock/hard rock including

conveying,breaking boulders in small piece and spreading the stuff,embankment as and where

directed within & any mtrs.from the end of the cuttung with all required lead and lift,including

filling,watering,consolidating spreaded soil anrd rolling of filled earth work in 200 mm thick

2 layers at OMC to required density consoladation with power roller 8 to 10 T.including filling in CMT

depressions which occur during the process,including watering of earthwork etc.as directed by

EIC.(Only cutting measurement will be Paid )including throwing away the extra stuff to out side

premises any lead etc. complete.

Excavation for foundation up to 1.50 m Depth including sorting out and stacking of useful

materials & Refilling the sides of the trenches or low lying in the yard and disposing of the excavated

stuff up to any lead -Dense or Hard soil

Excavation for foundation for depth from 1.5m to 3.0m including sorting out and stacking of

4 useful materials & & Refilling the sides of the trenches or low lying in the yard and disposing of the CMT

excavated stuff up to any lead - Dense or Hard soil

Excavation for foundation up to 1.50 m Depth including sorting out and stacking of useful

5 materials & Refilling the sides of the trenches or low lying in the yard and disposing of the excavated CMT

stuff up to any lead - Soft rock

Excavation for foundation for depth from 1.5m to 3.0m including sorting out and stacking of

6 useful materials & & Refilling the sides of the trenches or low lying in the yard and disposing of the CMT

excavated stuff up to any lead - Soft Rock

Excavation for foundation up to 1.50 m Depth including sorting out and stacking of useful materials

7 & Refilling the sides of the trenches or low lying in the yard and disposing of the excavated stuff up to CMT

any lead - hard rock

Excavation for foundation for depth from 1.5m to 3.0m including sorting out and stacking of

8 useful materials & & Refilling the sides of the trenches or low lying in the yard and disposing of the CMT

excavated stuff up to any lead - Hard Rock

Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including

9 watering, ramming and consolidating, etc complete with all lead and lift. Murrum shall be brought CMT

form out side at any lead.

Earthwork for embankment & for filling in yard & road for levelling finishing the ground level as

per FGL ,including breaking clods, dressing with all leads and lift including watering and

consolidation of earthwork in yard & embankment in 200 mm thick layers up to including filling the

depression if any occurred during the process using vibratory roller,etc complete as directed by E.I.C.

10 Item rate Including all material cost all leas & lift,all Labour charges,all government taxes & CMT

Royalties.(Note : 25 % of the successive bill amount shall be retained till lapse of one full scale

monsoon and rectifications of subsistence if any to the design ground level)

Filling in plinth/trenches & yard with earth in layers not exceeding200 mm, thick layers including

11 watering, ramming, consolidating etc., complete as directed by EIC. - Excavated earth from CMT

foundation. The item rate includes all leads & lifts.

Providing & Filling in plinth with sand under floors including watering, ramming, consolidating and

dressing completed

[B] CONSTRUCTION

(1) MASONARY WORK

Precast concrete block masonary (including quoin blocks, jamb blocks closer etc.) with solid

concrete blocks of approved size made of cement concrete 1:3:6 mix (1 Cement, : 3 Coarse sand :

graded stone aggregates of 20 mm and down grade) in cement mortar 1:6 - foundation and plinth

Precast concrete block masonary (including quoin blocks, jamb blocks closer etc.) with solid

concrete blocks of approved size made of cement concrete 1:3:6 mix (1 Cement, : 3 Coarse sand :

14 graded stone aggregates of 20 mm and down grade)cement mortar 1:6 for SUPER STRUCTURE CMT

G.F+F.F+Stair Cabin.

Precast concrete block masonary (including quoin blocks, jamb blocks closer etc.) with solid

concrete blocks of approved size made of cement concrete 1:3:6 mix (1 Cement, : 3 Coarse sand :

15 graded stone aggregates of 20 mm and down grade) in foundation and plinth cement mortar 1:4 for SMT

Partition wall up to plinth & two floors G.F+F.F+Stair Cabin.

(2) CONCRETE WORK

Providing and laying cement concrete 1:4:8 (1 cement :4 course sand : 8 black crushed stone

aggregates 40mm nominal size ) and curing complete - Foundation and plinth

Providing and laying cement concrete 1:5:10 (1 Cement : 5 Course sand : 10 crushed stone

17 aggregate 40mm nominal size ) and curing complete- For Foundation,yard and plinth. CMT

DESCRIPTION UNIT APROX. QTY.

Providing laying controlled cement concrete M-15 as per Mix design for fair finish exposed work

with curing etc.complete Excluding the cost of Ply wood sheathing/Acro form work AND

18 excluding the cost of reinforcement.etc complete as directed by EIC, for base of cable trench bottom CMT

raft, wall pardi, top slab for cable trench, flooring Slabs, shelves, Coping, from top of foundation

levels up to floor level .

Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc.

complete Excluding the cost of ply wood sheathing/Acro form work & adjustable tubular steel

supports / Props and excluding the cost of reinforcement. For Footing base of col.,foundation & mass

Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc.

complete Incluiding the cost of ply wood sheathing/Acro form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement.- but for Column G.F.+F,F.+ Stair cabin

Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc.

complete Incluiding the cost of ply wood sheathing/Acro form work & adjustable tubular steel

21 supports / Props. but excluding the cost of reinforcement for Beam,G.F.+F,F.+ Stair cabin CMT

Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc.

complete Incluiding the cost of ply wood sheathing/Acro form work & adjustable tubular steel

22 supports / Props. but excluding the cost of reinforcement. for SILL, LINTEL, CHAJJA, SLAB for CMT

G.F.+F,F.+ Stair cabin

Providing & laying control cement concrete M-20 as per mix design exposed work with curing etc.

complete Incluiding the cost of ply wood sheathing/Acro form work & adjustable tubular steel

supports / Props. but excluding the cost of reinforcement. M20 for Wall,G.F.+F,F.+ Stair cabin

Providing & laying control cement concrete M-25 as per mix design exposed work with curing etc.

complete excluding the cost of ply wood sheathing/ Acro form work & adjustable tubular steel

supports / Props and excluding the cost of reinforcement.For Foundation , Footing,Base of

column, mass concrete.

Providing & laying control cement concrete M-25 as per mix design exposed work with curing etc.

complete including the cost of ply wood sheathing/ Acro form work & adjustable tubular steel

supports / Prop but excluding the cost of reinforcement. For Column G.F+F.F+Stair Cabin.

Providing & laying control cement concrete M-25 as per mix design exposed work with curing etc.

complete including the cost of ply wood sheathing/ Acro form work & adjustable tubular steel

supports / Prop but excluding the cost of reinforcement. but M25 for Beam G.F+F.F+Stair Cabin.

Providing & laying control cement concrete M-25 as per mix design exposed work with curing etc.

complete including the cost of ply wood sheathing/ Acro form work & adjustable tubular steel

27 supports / Prop but excluding the cost of reinforcement. but M25 for Slab & Chhaja, Lintel , wall CMT

G.F+F.F+Stair Cabin.

Providing & Fixing in position as per approved drawing TMT steel reinforcement bars

FE500/500D/550/550D confirmong to IS 1786 in RCC work including Cutting,bending, binding

28 with 16 gauge annealed wire, of bars as per IS requirenment If necessary and placing in position etc. MT

completed for RCC work. etc completed as directed by EIC.

Providing & Fixing in position as per approved drawing Thermo Mechanically treated bars (TMT

bars) steel reinforcemnet bars FE500/500D/550/550D CRS confirming to IS 1786 in RCC work

29 including Cutting,bending, binding with 16 gauge annealed wire, of bars as per IS requirenment If MT

necessary and placing in position etc. completed for RCC work. etc completed as directed by EIC.

(3) PLASTER WORK

Providing 15mm thick cement plaster single coat on masonary / bela / concrete wall / ceiling for

30 plastering up to any floor level finished even and smooth in cement mortar 1:3 (1 Cement : 3 sand) SMT

finished with floating coat of neat cement slurry.

Providing 15mm thick sand face cement plaster on walls in single coat on fare side

31 masonary/bela/concrete wall/ceiling up to any height and finished even and smooth in C.M. 1:3 (1 SMT

cement : 3 sand) etc. complete.

Providing 20mm thick sand face cement plaster on wall up to height 10 meters above ground level

32 consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat SMT

of C.M. 1:1 (1 cement : 1 sand) etc. complete.

Providing Cement vata (10cm x10cm size) quarter round in cement mortar 1:1 including neat cement

finishing, watering, etc complete.

Supplying & fixing 600 mm dia hot dip galvanizing cross spiral type razor edge Concertina coil

having 80 circles, 200 clips with optimum openable stretch of 8 m length using a central core wire

high carbon spring steel ( High tensile wire) made up of 2.6 mm. dia. as per IS : 4454, Part - 1, Grade -

II having minimum galvanizing of 230-250 gms per mm2.around which a edge of razor sharp barbs

strip of 0.5 mm. thick & 19 mm. width confirming to IS : 513 DD quality having minimum

34 galvanizing coating of 12 microns with series of barbs punched along the length at regular interval RMT

supported / tied with four rows of 4 mm GI runner wires to newly proposed GI angle brackets at top

and one runner wire at the bottom with U nails & clips etc complete as per manufacturers specification

and directed by EIC. (Rate is inclusive of all labours, lead, lift, transportation, cost of coils, 4 nos of

mm GI runner wire, U nails, clips etc)

DESCRIPTION UNIT APROX. QTY.

Providing Distempering (three coats) with oil bound distemper of approved brand and

manufacture and of required shade on undercoated wall surface to give an even shade over

and including a priming coat with distemper primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar droppings and other foreign matter as

35 directed by EIC.(Note: Before making final payment to agency warranty certificate from the SMT

original manufacture for specific project on the name of agency must be collected.)

Providing & applying 1 coats of SMARTCARE PRIMERO or its equivalent modified ACRYLIC

water based alkali resistant primer on exterior existing plastered surface including finishing & thinning

as per manufacturer’s instruction. The work should be carried out strictly as per manufacturer's

36 specification and requirement comp. as directed by EIC. (Note: Before making final payment to SMT

agency warranty certificate from the original manufacture for specific project on the name of agency

must be collected.)

Providing & applying 2 coats of APOCOLITE APEX or its equiv. ACRYLIC EXTERIOR paint with one

coat of primer on existing plastered surface or approved make & shade including finishing &

thinning as per manufacturer’s instruction. A gap of 6 hrs. Should be given between

subsequent coats. The work should be carried out strictly as per manufacturer's specification

37 and requirement comp. as directed by EIC(Note: Before making final payment to agency SMT

warranty certificate from the original manufacture for specific project on the name of agency

must be collected.)

Providing and applying 3 coats of ACID/ALKALI resisting paint of approved shade and make to

38 wall, ceiling including filling putty smoothening the surfaces scaffolding, etc complete as directed by SMT

Providing white washing with lime on wall / ceiling surfaces (three coats) to give and even shade

39 including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign SMT

Providing & laying ceramic tiles 6MM to 8 MM THICK -JOHNSON /KAJARIA

/NITTCO/SIMPOLO/AGL/SOMANI/VARMORA or its equivalent make fin flooring treads of steps

40 and landing laid on 10mm thick cement mortar1:6 [ 1 cement : 6 coarse sand] and finished with white SMT

or colour cement complete as directed by EIC (For battery room) Size 600x600mm

Providing & fixing 24"*24" Vitrified 8 to 10 mm thick tile-JOHNSON /KAJARIA

/NITTCO/SIMPOLO/AGL/SOMANI/VARMORA or its equivalent make flooring over 20 mm (average)

base of cement morter 1:6(1 Cement:6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentalling of existing flooring and jointed with colour cement slurry

including finished with flush pointing and cleaning the surface etc.complete.

Providing and laying color glazed tiles-JOHNSON /KAJARIA

/NITTCO/SIMPOLO/AGL/SOMANI/VARMORA or its equivalent make 8 to 10 mm thick in

flooring & Dedo laid on bed of 12mm thick cement mortar 1:3 (1 cement : 3 course sand) &

fixing the same in cement & providing 12mm thick back coating of cement plaster in CM 1:3 for

base, filling the joints with white/color cement neatly finishing the joints curing etc. complete.

Providing and laying approved quality polished Kotah stone slab 600x600mm & 25mm

thick for flooring including using 35x25mm approved quality machine cut, marble strip over

20mm (avg) thick base of cement mortar 1:6 (1 cement : 6 course sand or L.M. 1:1.5 laid

43 over and jointed with grey cement slurry including rubbing and mirror polishing using SMT

polishing machine with grinding six emery's of different no. incl. using special chemical

powder for polishing including white cement coating two times during polishing for filling up

minute holes or cracks in joints etc. comp.

Providing and laying polished Kotastone slab 25 mm th. in risers of steps, Dedo and sills

44 laid on 10 mm thick CM 1:3 & jointed with grey cement slurry including rubbing and polishing SMT

Providing and laying marble stone slab flooring over (20mm average ) base of cement mortar 1:6 (1

45 Cement : 6 Coarse sand) laid and jointed with grey cement slurry including rubbing and polishing SMT

complete (A) Marble slab 25mm thick.

(6) DOORS AND WINDOWS

DESCRIPTION UNIT APROX. QTY.

Providing and fixing fully glazed / partly glazed double leaf 20 micron thick anodized aluminium

door with following listed extruded section manufactured by Jindal Aluminium Ltd. & other

accessories, the Alluminium sections are of HE9WP Group:

(1) with door outer frame section of 63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/rmt (J4605) (2)

Door shutter vertical style (meeting style) of 53.7 x 44.45 x 2.30mm thickness (J4537) weighing

1.238 Kg/m (3) Hinge side 53.7 x 44.45 x 2.30mm thickness (J4540) weighing 1.173 Kg/Rmt

4) Bottom rail of size 150 x 44.45 x 2.40mm thickness (J4538) weighing 2.376 Kg/Rmt (5) Lock rail

of size 150 x 44.45 x 2.40mm thickness (J4538) weighing 2.376 Kg/Rmt (6) Top rail of size 47.62 x

44.45 x 3.18mm thickness(J4506) weighing 1.501 Kg/Rmt (7) Ventilator middle member (if

required) 49.91 x 44.45 x 3.00mm thickness (J4621) weighing 1.495 Kg/ Rmt (8) Aluminium handle

46 127.00 x 37 x 3.65mm thickness (J4483) weighing 1.912 Kg/No. (9) Tower bolt 250mm long SMT

(J4954) (10) Aluminium bending mortice lock (J4420) )11) Top panel using 6.0mm thick Triveni or

Modi or Saint Gobain make float glass fixed with PVC Clear gasket (12) Bottom panel using 12mm

thick exterior grade prelaminated particle board of make approved by the Engineer - in - Charge (for

partly glazed door) fixed with virgin PVC clear gasket

13) Door Closer of make approved by the Engineer - in - Charge with all other required fixtures and

fastening of colour anodized with aluminium beading, with all labours and materials etc.complete

as directed by EIC. Aluminium section user for fixing hinges, door closer, etc. shall be filled with

country teak wood to

receive screws.

Providing and fixing window having extruded aluminium 20micron thick colour anodized section frame

main outer size 95mm x24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt

with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member

of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

47 glass in two shutter and one shutter with chiken mesh of SS 304, mesh no. 15, wire dia. 0.4mm with powder SMT

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing standard extuded of alluminium section of size 63.0X38.10X1.20mm(of Jindal

section No.2434 @Wt. 0.643Kg/Rmt ) with anodized alluminium frame frame for ventilation with

5mm thick white/brown glass fixed horizontal louvers in aluminum channel as per details drawings

Providing & fixing approved quality FRP door having FRP frame of size 100x50mm & 28mm

thick FRP shutter with Depressed Panel shutter having extra reinforcement on side and edges and in

Gel coat finish. The core of the shutter is to be filled up with injected fibre extinguishing grade

polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for fixing

hinges and fixtures. The whole FRP frame and shutter is to be water proof, weather proof, termite

proof and resistance to mild acid/Alkali resistance including SS hinges with necessary screws and

aluminum fixture and fastenings etc complete. 28mm thick shutter & 100x50mm frame.

Providing & fixing approved quality FRP door having FRP frame of size 125x65mm & 35mm

thick FRP shutter with Depressed Panel shutter having extra reinforcement on side and edges and in

Gel coat finish. The core of the shutter is to be filled up with injected fibre extinguishing grade

polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for fixing

hinges and fixtures. The whole FRP frame and shutter is to be water proof, weather proof, termite

proof and resistance to mild acid/Alkali resistance including SS hinges with necessary screws and

aluminum fixture and fastenings etc complete. 35mm thick Shutter & 125X65mm size frame.

Providing & Fixing approved quality steel cupboard shutter of 18 gauge with steel frame and fixing

51 the frame with brick masonary including locking arrangement with 3 coats of approved oil paint etc. SMT

Providing & fixing built in wall teak wood cup board having 75x50mm teakwood frame & 35mm,

thick shutter frame with approved quality of 20 Gauge GI wire mesh jail (MOSQUITO PROOF) as

panels fixed with teak wood shutter frame & battens etc. including fixtures & fastening & with

150mm long 3 nos. of hinges on each flap of shutter and 3 coats of oil paint including primer of

approved shade & make and as per drawings etc. complete as directed by EIC.

Providing & fixing approved quality 35mm th fully paneled teakwood door with 100X70mm size

teak wood fram with single or double shutters with 100X35mm size styles and lock rail of

125X35mm and lock rail 175X35mm including 100mm to 125mm X20mm thick equal size vertical

battens in panels with tongue and groove arrangement as per dwg as panels without fixtures and

53 fastening but with 3no of 100mm long butt or parliamentary hinges for each flap of double shutter and SMT

1500mm long to single shutter as per instructions including 3Nos. of M.S.Flat hold fast grouted in

wall on each side, 3coats of oil painting with primer of approved shade and make etc. complete as per

dwg. & as directed by EIC(Fixture except hinges and hold fasts will be paid seperately)

Supply and fixing approved quality to doors & windows, ventilators cup boards following fixtures

and fastening of approved quality with wooden or metal screws, nuts and bolts as directed or as per

the drawing & specification etc complete as directed by EIC for tower bolt 150mm long &10mm dia,

Supply and fixing approved quality to doors & windows, ventilators cup boards following fixtures

and fastening of approved quality with wooden or metal screws, nuts and bolts as directed or as per

the drawing & specification etc complete as directed by EIC for M.S. best chromium plated Aldrop

16mm Dia and 300mm long.

Supply and fixing approved quality to doors & windows, ventilators cup boards following fixtures

and fastening of approved quality with wooden or metal screws, nuts and bolts as directed or as per

the drawing & specification etc complete as directed by EIC but M.S. best chromium plated latch

10mm Dia and 250mm long,

DESCRIPTION UNIT APROX. QTY.

Supply and fixing approved quality to doors & windows, ventilators cup boards following fixtures

and fastening of approved quality with wooden or metal screws, nuts and bolts as directed or as per

the drawing & specification etc complete as directed by EIC- for Brass C.P. Rubber stopper (For

Supply and fixing approved quality to doors & windows, ventilators cup boards following fixtures

and fastening of approved quality with wooden or metal screws, nuts and bolts as directed or as per

58 the drawing & specification etc complete as directed by EIC- HEAVY ALUMINIUM PLATE NO

SECTION HANDLE 3mm to 4mm th. & 150mm long,

(7) FABRICATION ITEMS

Providing and fixing approved quality rolling shutters of approved make and made with gear

operated type with crane handle as per IS 6248 -1979 having 18 gauge sheet thickness and 80mm

wide M.S. Laths interlocked together through their entire length and jointed together at the ends by

end locks mounted on specially designed pipe shaft with bracket plates guide channels and

59 arrangements for inside locking with push pull operation complete including the cost of hood cover SMT

with one coat of red oxide primer followed by 3 coats of oil painting of approved shade & tint etc

complete as directed by E.I.C (The measurment shall be paid for wall opening plus drum only) (A)

Shutter having width below 3.5 meter.

Providing & fixing MS Grill of approved quality & design weighing 25 to 30 kg/smt. as per

drawing & as directed with including welding or bolted fixtures and fastening. M.S. Flat hold

fasts etc. with 3 coats of oil painting of approved shade & tint with one coat of red oxide

primer etc. complete as directed by EIC.

Steel work, welded in built up section framed work including cutting, hosting, fixing in position and

applying a priming coat of read lead paint. (A) in beams and joists, channels angles Tees, flats with

connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins connected

to common rafter and the like

Providing and fabricating and erecting GI work Welded angle posts, racks & trays for cable trench

using structural steel angels and flats, sheets etc. of approved steel manufacturer as per drawing &

62 design including cutting, welding & fixing hold fast in wall with C.C. & with hot deep galvanized as KG

per IS-2633/72 and 209 of 1966 or latest amendment etc& make etc. completed as directed by

EIC.(All materials required for the work to be brought by the contractor).

Providing, supplying, fabricating & erecting G.I. Chain link fencing panel of size 2400x2000mm.

made from 75x75mm & 10 gauge GI.Chainlinks & 50x50x6mm G.I.Angle including fixing the

chainlink in angle frame by means of 40x3mm.GI Flat welded to angle frame drilling to holes in

angle frame & flat & fixing the same with angle post in line level & plumb by means of 10 mm dia

63 bolts frame,flat & nuts with hot deep galvanized as per IS-2633/72 and 209 of 1966 or latest KG

amendment etc, completed as per drawing & as directed by EIC (ALL THESE MATERIALS LIKE

MS FLAT,CHAINLINK FENCING,MS ANGLES , NUTS,BOLTS,WILL HAVE TO BE

SUPPLIED BY THE CONTRACTOR).

Providing & fixing G.I. Barbed wire fencing (12/14 Gauge) having mass and uniformity of Zinc

coating & specifications shall be as per IS 2140 – 1978 & IS 4826 – 1979 code with minimum

64 micron coating having 3 horizontal rows, fixing with angle posts by means of G.I. U pins or with RMT

R.C.C. poles by 14 Gauge G.I. Wire as per drawing etc, complete as directed by EIC.

Supply, fabrication, cutting, threading including hot dip galvanizing including supply of MS rods of

65 appropriate size for foundation bolts with two nos. of Nuts for each foundation bolts as per drawings / KG

instructions of EIC.

Providing and fixing best quality of H.D.P.E. PIPE of approved ISS quality with all acessories,

66 fittings,jointing etc. suitable for laying cables etc. complete as directed by E.I.C. 63 mm dia. Outer 10 RMT

Setting of template & foundation bolts in line and level before concreting of foundation and

making arrangement of fixing template in such a way as it remains in position during concreting etc.

comp. As directed by EIC. The rate includes supplying & fabricating of templates as per template

67 drawing including all materials, tools, tackles, & labour required for that. No extra payments for NO

preparation of templates will be made. The templates prepared will be the property of the agency.

Setting of TR Rail for transformer plinth in line, level and gauge before concreting of foundation

68 and making necessary holes in rail poles if required & fixing the foundation bolts and fixing template NO

in such a way as it remains in position during concrete as directed by EIC.

Providing & fixing M.S. ladder 450mm wide or 50x6mm M.S. flat and 16mm dia M.S. Bars

69 welded as step at 300mm C/C and fixing the ladder & 3 coats of oil painting etc. complete RMT

as directed by E.I.C.

Providing & fixing sliding gate of 40 mm dia mild steel pipe B class all round and 20 mm dia Mild

steel pipe at 200 mm C/C and 12mm Mild steel square bars at 200 mm C/C alternatively (i.e.One

between two pipes) vertically welded to 40 mm dia pipe frame as per drawing and design with

necessary brackets,hold fasts,locking arrangement on top & aldrop on both the side including base rail

70 for sliding the gate having ball bearing rollers & guide tracks of 50x6mm M.S. flat with hold fast, SMT

fabrication of side supports including fixing GETCO letter on front side etc.comp.With three coats of

approved oil painting & one coat of red oxide primer as directed by EIC (The cost does not include

the cost of reinforcement,column support,joints, concrete masonry work.

Providing & Fixing SIGN BOARD having size 1000 X 750 mm. for SUB-STATION made from

gauge M.S. Sheet having frame work of 35X35X3 mm. M.S. angle all-round & 4 vertical

71 intermediate angle supports at equal distance welded to sheet with 3 Nos. of 50X50X6 mm. M.S. NO

angle posts 3.0 M. long with arrangement of bolting, 3 coats of oil painting etc., complete as directed

Providing & fixing pre cast Rubber dyed inter locking concrete block 60MM thick with grade of

concrete M300pneumatic compressed by mechanically pressed and as per approved design including

75 mm sand layer for levelling and filling the joint with sand in proper line and level.

DESCRIPTION UNIT APROX. QTY.

Providing & placing 50mm thick & 300mm wide prestressed concrete cover (for clear span of up to

1.2 meter in proportion (1:1:5:3) or M-20 necessary reinforcement or 4mm dia HT steel wire-4 Nos.

bars and 4mm dia. distribution bars at 150 mm C/C as per drawing & design & vibrating with

73 vibrators. Finishing all the surfaces, curing by placing in water pond for ten days etc. complete as SMT

directed by E.I.C. ( The rate includes cost of all material required, labour charges, transportation,

loading, unloading etc...

Providing & fixing M.S. cover for cable trench in control room made from 14 Gauge M.S. Sheet

74 having M.S. Angle frame alround of 40 X 40 X 5mm. size and cover shutter frame of angle 30 x 30 x SMT

5 mm size & 2 supports at middle including oil painting of 3 coats.

Providing & laying Water proofing treatment on terrace & up to height of 300 mm above finished

water proof surface.including applying neat cement slurry 2.75 kg./sq.mt. on cement admixed with

water proofing component after cleaning the surface, Laying cement concrete with brick bat 75mm to

100mm thick with 50% of C.M. 1:5 admixed with water proofing component over 20mm thick layer

of C.M. 1:5 to required slope including ramming at junction of wall and slab, after two days of proper

curing applying a second coat of cement slurry, finished the surface with 20mm thick C.M. 1:4 china

75 mosaic flooring and finally finishing flooding 75mm deep with water on terrace for a period of two SMT

week. Actual flate, wall to wall inside area shall be paid, no payment shall be made for round vata up

to height of 300 mm above finished water proof surface.The contractor shall submit performance

guarantee of the waterproofing item at the rate of 20% of cost of item of work order in the form of

DD/BG of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a period of

years from actual date of completion of work stamp paper of appropriate value in approved format of

Providing & applying anti termite treatment, as per IS 6313 (Part.II & II 2001) for building works

in pre construction & post const. stages, using chemicals conforming to relevant IS in water emulsion

and effective when applied uniformly over the area to be treated. The chemical to be used is

chlorophriphos 20% EC or its equivalent. The treatment is to be carried out as per the procedure

mentioned below and treated plinth surface area is to be taken for measurement. (with performance

guarantee for 5 years) The contractor shall submit performance guarantee of the waterproofing item at

the rate of 20% of cost of item of work order in the form of DD/BG of Schedule Bank / Nationalised

Bank in favour of GETCO (A/c Agency) for a period of 5 years from actual date of completion of

work stamp paper of appropriate value in approved format of GETCO. a)For pre construction

treatment: For plinth filling & periphery holes in side plinth to be drilled 300MM C/C each having

depth 1.5M and for inside plinth the hole are to be treated with diluted chemical solution, 1.5 lit. per

hole, in the ratio of 1:20.

Providing & fixing approved quality 300 x 300mm size marble year plate with black border all

round & letters including fixing the same in cement mortor etc. comp.as directed by EIC.

Providing plantation & development of plants/ trees/ flowers, ornamental plants and garden shrubs,

small trees of plants of selected & approval name quality, size and growth in good condition. The

work includs cost of plants, materials, digging pit in the soil of size 0.60 x 0.60 x 0.60 mtr. Soil for

78 planting trees, mixing manure & refilling the pit with good earth, watering as and when required. NO

Providing pesticides / fertilizer for maintenance, replacement & replacing of dead plants during

maintenance cleaning, removing, labours, tools & tackles transportation, loading, unloading etc.,

complete directed by the E.I.C.

Providing and fixing sign board made out of 2mm aluminium/ ACP sheet of required size as per

design given by EIC , pre trated with phospheting process and acid etching, coated with one coat of

epoxy primer and two coats of best qualift epoxy paint, reflectorised with retro reflective sheeting as

per lates M.O.S.T specifications. Latters and numerals should be as per IRC 30-1968, 3.1m long stand

79 post and frame may be erected from 50 x 50 x 5mm or 75 x 75 x 6 mm as required and painted with NO

best quality epoxy coatings. The details of symbols or inscription / numerals for board shall be as per

instruction of EIC. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cm for each leg

including excavation concreting curing etc complete under supervision of EIC.

Providing & fixing Acrylic name plates of required size including painting letters as directed &

fixing as directed by E.I.C.

[C] WATER SUPPLY AND DRAINAGE & MISC.

Providing, Laying, and Jointing in True line and level 15mm dia. U.P.V.C Pipe (SCH-40) line

including fittings make or equivalent as approved by Engineer in Charge pipe Shall be Fixed on the

Wall with help of Clamp at Every two meter C/C or shall be conceled as directed including necessary

fittings etc. including fittings testing of pipe and joints and fixing the same with adhesive Solvent,

including cost of all materials -15mm pipe.

Providing, Laying, and Jointing in True line and level 25mm dia. U.P.V.C Pipe (SCH-40) line

including fittings make or equivalent as approved by Engineer in Charge pipe Shall be Fixed on the

82 Wall with help of Clamp at Every two meter C/C or shall be conceled as directed including necessary RMT

fittings etc. including fittings testing of pipe and joints and fixing the same with adhesive Solvent,

including cost of all materials - 25mm pipe.,

Providing, Laying, and Jointing in True line and level 40mm dia. U.P.V.C Pipe (SCH-40) line

including fittings make or equivalent as approved by Engineer in Charge pipe Shall be Fixed on the

83 Wall with help of Clamp at Every two meter C/C or shall be conceled as directed including necessary RMT

fittings etc. including fittings testing of pipe and joints and fixing the same with adhesive Solvent,

including cost of all materials - 40mm pipe,

Providing, laying and jointing in true line and level 50 mm diameter UPVC pipe (SCH-40) for cold

water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter c/c or shall be concelled as directed including necessary fittings, fastening, fixtures, excavation

and back filling. The rates includes testing of pipe and jointing and fixing the same with adhesive

solvent, including cost of all materials.

Providing & fixing to all ceiling and floor 4Kg/SqCm FINOLEX OR its equivelent rigid PVC pipes

of the following out side diametre, wall cleaps,etc including necessary fittings like

85 bend,shoes,Y,Tee,etc including testing of pipes and jointed with adhesive solvant cement including RMT

cost of all materials making good wall celing and floor.. For 90mm O.D. for rainwater pipe

DESCRIPTION UNIT APROX. QTY.

Providing & fixing FINOLEX brand or equivalent approved quality rigid 6 kg/cm2 P.V.C. pipe for

rain water including necessary fittings like bends, shoe, cowl etc. & fixing the pipes to the wall in

86 plumb by means of G.I. Clamps of 18 gauge sheet at 1 to 1.5 meter distance, filling the joints with RMT

approved solution complete as directed by E.I.C. - 90 mm Dia.

Providing & fixing to all ceiling and floor 6Kg/SqCm FINOLEX OR its equivelent rigid PVC pipes

of the following out side diametre, wall cleaps,etc including necessary fittings like

87 bend,shoes,Y,Tee,etc including testing of pipes and jointed with adhesive solvant cement including RMT

cost of all materials making good wall celing and floor.. for 110 MM O.D. PVC PIPE

Providing & laying rigid 4kg/cm2 PVC drainage pipe including necessary fitting like bend,tee,Y-bend

88 plug etc. fixed with all wall by means of clamps & nails with water tight joints by approved solution RMT

etc complete as directed by EIC for 75mm dia pipe.

Providing & laying rigid 4 kg/cm2 PVC drainage pipe 110mm dia. including necessary fittings

89 like bend, tee,Y bend plug etc. fixed with wall by means of clamps & nails with water tight joints by RMT

approved solution etc. complete as directed by EIC.

Providing & laying rigid 10 kg/cm2 PVC drainage pipe 110mm dia. including necessary fittings

90 like bend, tee,Y bend plug etc. fixed with wall by means of clamps & nails with water tight joints by RMT

approved solution etc. complete as directed by EIC.

Providing and laying (to level or slops) and jointing reinforced concrete light duty non-pressure pipes

91 I.S. class NP2 of following internal diameter with collars and butt ends prepared for collar joints RMT

completed-150mmDia.

Providing and laying (to level or slops) and jointing reinforced concrete light duty non-pressure pipes

92 I.S. Class NP2 of following internal diameter with collars and butt ends prepared for collar joints RMT

completed-200mm Dia.

Providing &Laying NP-3 Class 300mm R.C.C hume pipe of approved size with for road crossing

including excavation up to 1500 to 2000mm depth & refilling the trench, joining the pipes with C.M

(1:1) & filling 150mm thick concrete (1:4:8) below joints,curing etccomplete as directed.

Providing &Laying NP-3 Class 900 mm R.C.C.Hume pipe of approved size with for road crossing

including excavation up to 1500 to 2000mm depth & refilling the trench, joining the pipes with C.M

(1:1) & filling 150mm thick concrete (1:4:8) below joints,curing etccomplete as directed.

Providing and fixing PVC SWR Nahani Trap IS 14735 for drain with jali of the following nominal

95 diameter of self cleansing design with C.I.scread down or hinged grating including the cost of cutting NO

and making good the walls. For 100MM DIA

Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber and water tight C.I.

96 cover with frame of 300x300mm size (inside) with standard weight.(i) Square mouth traps. (C) NO

150mm x 100mm size P or R-type.

Providing & fixing approved quality light type 450X600mmsize C.I. Manhole covers with water tight

C.I. Frame & fixing the same in concrete etc. complete as directed by E.I.C.

Providing and fixing gun metal check or non return full way wheel valve. -25mm dia.

99 Providing and fixing gun metal check or non return full way wheel valve. - 40mm dia. NO

100 Providing and fixing Brass chromium plated screw down bib tap. -15mm dia NO

Providing and fixing chromium plated brass half turn flush cock of approved quality including

fixing in pipe line, etc complete - 25mm dia

Providing and fixing chromium plated brass Shower rose with 15mm or 20mm inlet with C.P.

Concealed Shower Cock (A) 100mm dia. Each

Providing & Fixing approved quality a set of 6 Nos. of stainless steel coat racks of approved quality

103 fixed on 20 mm. thick teak wood batten including 3 coats of oil painting etc., complete as directed by NO

Providing and fixing approved quality C.P. Brass towel rod complete with C.P. Brass brackets fixed

to wooden plugs with C.P. Brass screws - 600mmx20mm size

Providing and fixing approved quality 600mm x 450mm beveled edge mirror of superior glass

105 mounted on PVC molded frame and fixed to wooden plugs with C.P. brass screws and washers. NO

Providing & fixing approved quality stainless steel sink of size 450 X 400 mm including all

necessary fitting as per instruction of E.I.C.,

Providing & Fixing 50mm dia GI pipe railing in the balcony of quarter including 3 coats of oil

painting etc complete.

(3) BORE AND WATER SUPPLY

Providing & fixing approved quality readymade PVC water tight storage tank of 1000 liters

capacity made from linear low density polythene & low density polythene LDPF product confirming

108 to I.S.: 10146-1982 with cover including providing & fixing one 20mm dia, float valve ball-cock, one NO

20mm dia G.I. over flow pipe of length up to 0.30 Mt. including making all connection for inlet/outlet

etc. complete as directed by EIC.

Providing BOREWELL PRE FEASIBILITY REPORT (before conducting bore well work)

109 Feasibility report shall include geology of the area, Hydrological condition of the area, Water quality NO

of the area, location of borewell , depth of bore well and recommendation if any.

Drilling of Borewell of 325mm dia by machine in all kind of soil ,sand ,murrum, soft rock hard rock

110 and hard murrum etc up to required depth complete truly vertical with equipments & labours etc RMT

complete as directed by ELC

Bore plug having 100 mm height made from M.S. plate with 3holes at equal distance on

111 circumference for nut-bolts type,locking arrangement with nuts-bolts & lock nuts of std. NO

Providing and installing vertically C class 250mm dia with 5.2mm.Thickness of ISI standard M. S.

ERW casing pipe in bore as per specification including supplying graded gravel of suitable size and

packing the same surrounding the pipe from bottom includining sealing the bottom of pipe & welding

at joints & top clamping etc. comp..

DESCRIPTION UNIT APROX. QTY.

Providing & installing vertically C class 250mm dia with 5.2mm.Thickness of ISI standard M. S.

ERW casing pipe in bore as per specification including supplying graded gravel of suitable size and

packing the same surrounding the pipe from bottom includining sealing the bottom of pipe & welding

at joints & top clamping etc. comp. but for strainer pipe with slotted holes.

Providing & laying 50mm dia. approved ISI quality UPVC Column pipe of 10 feet length each of

114 Ashirvad,Astral,Finolex,Prince or its equivalent including making required threading, coupling, closing Rmt

clamping,fixing the same etc. Completed as directed by E.I.C.

Supplying and lowering the approved ISI submersible pump for 7.5HP/18 stage in bore well etc.

comp. as directed including ISI approved MEI type oil immersed auto transformer starter

commissioning and testing to required delivery head (all other accessories will be paid separately.)

Providing & joining approved quality flat Copper cables sufficient for 7.5 HP pump set etc complete

-4mm flat cable.

Providing & laying cement sealing work for the drilled bore - well hole to stop entry of upward salty

117 water including clay packing as required in proper manner or suggested by geologist to required depth NO

Providing and fixing approved quality control panel board metal box I.S.I. with a main fuse

connection ampere meter, volt meter 30 Amp. 3 phase switch single phase preventor cum water level

guard and male and female type socket 1 phase indicator lamps and toggle switch etc. including all

wiring/earthing completed as directed by E.I.C.

Providing & fixing approved quality single phase monoblock / self priming pump of ISI brand

119 (2H.P)with all GI fitting for inlet & outlet connection including providing G.M.Wheel valve required NO

electric fitting / switch board etc. comp.

Providing and fixing approved quality table top Wash basin with Bib cock, Angle cock with wall flange

and incl. fixing wash basin complete as directed by Engineer In Charge. waste pipe to be concealed with

approved quality SS bottle trap.(A) Wash basin and other accessories of make Cera

/Jaguar/Hindware/Simpolo Snow white of size 400mm x 400 mm x 150mm

Providing and fixing approved quality ORISSA PAN water closet squatting pan size 580mm

including providing and fixing 100mm size P or S trap jointing tap with the pan and soil waste pipe

121 and with G.I. inlet connection for flush pipe with W.C. pan and chromium plated brass half turn flush NO

cock of approved quality of 25mm dia etc. complete.

Providing & fixing Urinal of approved quality ) and including Self closing angle cock pressmatic with wall

flange and connecting pipe , connecting the Urinal with conceled waste pipe, trap etc. complete as

directed by Engineer In Charge. Waste water pipe connection shall be concealed only. Urinal of Cera

/Jaguar/Hindware/Simpolo Snow White of size 265mm X 335mm X 695mm

Providing 2500mm internal diameter & 4.0 Mt. deep Soak Pit including excavation in all types of

soil & soft rock & P.C.C. (1:4:8) bedding 300mm. thick below masonry and 450mm. thick B.B.

Masonry in C.M.(1:6) up to 600mm. height, 350mm. thick for further 600mm. and 230mm.thick for

remaining height honey combed, plastering in C.M.(1:3) outside up to 1.5 Mt. height and 100mm.

thick R.C.C. Slab with 600X600mm. C.I.HEAVY cover with frame, with necessary reinforcement as

per design & C.I. Vent pipe 1800mm long with B.B. Masonry pillar 350X350X450 plastered all

around filling 40 to 50mm. size brick bats up to 1.5 Mt. depth, including 16mm. dia. M.S.`U' stages

steps refilling including disposal of the surplus excavated earth up to the lead of 300mt radius

including 3 coats of white or colours wash to all exposed finished surface etc. complete as directed by

[D] YARD LELLING & METAL SPREADING & ROAD WORK

Providing and Laying Controlled cement concrete M20 for trimix RCC road excluding the cost of

reinforcement & including of using 125micron polythene sheet at base of concrete, using approved

quality polyester fiber (12mm) during mixing of cement concrete(@125gm per bag) and or as per

manufacturer's specification including preparing the sub base with form work of M.S Chanel of

required size to maintain level and slope of concrete with using surface vibrator, finishing the surface

with power floater and trove, light brooming on the surface with providing construction joints of size

10 mm wide 25mm deep in transverse direction @4.5m C/C with sealing the same with approved

quality bitumen sealent and providing expansion joints of size 25 mm width and upto through depth

of concrete using 25mm thick Dura Board HD-100 of approved quality and sealing the same with

approved quality bitumen sealent at 40meter C/C and longitudinally for 6m wide road using concrete

cutter machine with necessary equipments, labors tools tackles etc complete as dircted by EIC.

Providing and laying Granular sub-base by providing coarse graded material Grading- I using

B.T.M.C. (Black Trap Machine Crushed) metal 53 mm to 26.5 mm at 35 % , crushed stone aggregate

26.5 mm to 4.75 mm at 45% and below 2.36 mm at 20% ,having C.B.R. not less than 30%, as per

table 402 of MORTH gradation including leveling the material at site of work ,mixing and spreading

into grade and camber , watering and consolidation at OMC with roller including cost of material

,labour etc complete - GSB

Providing and laying spreading and compacting machine crushed black trap stone aggregate (53 mm

to 22.4 mm at 30 % , crushed stone aggregate 22.4 mm to 2.36 mm at 40% and below 2.36 mm at

30%), Wet Mix Macadam material with water to OMC in mechanically mix (pug mill) carriage of

126 mix material by tipper to site laying, spreading and compacting in sub base, base course on well CMT

prepared under base of compacting with roller to achieve the desired density etc completed as directed

by Engineer in charge (Mechanically laid) WMM

Supplying, stacking & spreading 40mm size crushed metal including transportation, filing the box

127 etc. complete as directed by EIC. (Box measurement will be paid with 15% voids deductions)- For CMT

yard metal spreading.

DESCRIPTION UNIT APROX. QTY.

Finishing with a layer of Cement slurry of mix 1:6 (1cement: 6 fine aggregate) laid uniformly over

cement concrete layer 1:5:10 . The cement consumption for cement slurry shall not be less than

128 kg for every 100 sq.m. SMT

Supplying and spreading 'Round up"(Glyphosphate 41%SL) of approved ISI standard make or

equivalent weedicide for weed control in proportion of 100ml weedicide and 250 gram ammonium

129 sulphate ,mixing with sticking agent mixed with 10 litre of clean fresh water and second spray with SMT

same treatment as stated above after two months and as per manufacturer's specification and as

directed by Engineer-in charge.

[E] OIL TANK PIPE LINE & SUPPORTING ACCESSORIES

Providing & supplying of ISI Mark G.I Pipes with coupling of Heavy duty class and diameter

including all taxes, insurance, transportation,friet charge,octroi, inspection charge, loading, unloading

etc complete for 50mm dia pipes. Payment will be released upon production of GST Paid Bills.

Providing & supplying of ISI Mark G.I Pipes with coupling of Heavy duty class and diameter

including all taxes, insurance, transportation,friet charge,octroi, inspection charge, loading, unloading

etc complete for 80mm dia pipes. Payment will be released upon production of GST Paid Bills.

Providing B.B. Masonry inspection chamber (MANHOLE) of 600mm x 600 mm size including

light type approved C.I. Cover with frame, necessary excavation, bottom concreting of P.C.C. (1:4:8)

150mm thick/225mm, thick B.B. Masonry in C.M. (1:6) 15mm thick cement plaster in C.M. (1:3)

132 inside & to all exposed faces up to 300mm below ground level, curing etc. including disposal of NO

surplus excavated earth up to radius of 500mt. including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by EIC. (B.B. Masonry up to 1000mm depth).,

Providing & fixing approved best quality I.S.I Heavy Gun Metal Wheel valve for- 80mm dia.

Payment will be released upon production of GST Paid Bills.

Providing & fixing Special G.I 'R' brands or its' equivalent ISI approved quality fitting including

cutting the pipe, threading ,making water tight joint etc, complete as per directed by E.I.C. Flange

with nut bolts for 80mm dia G.I Pipe with packing sheet & PVC insulation solution. Payment

will be released upon production of GST Paid Bills.

Providing & fixing Special G.I 'R' brands or its' equivalent ISI approved quality fitting including

cutting the pipe, threading ,making water tight joint etc, complete as per directed by E.I.C. Tee for

80mm dia G.I Pipe. Payment will be released upon production of GST Paid Bills.

Providing & fixing Special G.I 'R' brands or its' equivalent ISI approved quality fitting including

cutting the pipe, threading ,making water tight joint etc, complete as per directed by E.I.C. Elbow for

80mm dia G.I. Pipe. Payment will be released upon production of GST Paid Bills.

Providing & fixing Special G.I 'R' brands or its' equivalent ISI approved quality fitting including

cutting the pipe, threading ,making water tight joint etc, complete as per directed by E.I.C. Elbow for

50mm dia G.I Pipe. Payment will be released upon production of GST Paid Bills.

138 Providing and fixing in position CI cowel went to pipes (C ) 100mm dia. RMT

Drilling of Bore hole 32mm to 40mm dia by means of compressor machine having depth of hole up

to 1.00 to 1.20mt.as decided by engineer incharge & as per drawing in all sorts of soil,sand, clay,hard

rock ec. Truly vertical to existing land with cleaning the same by air & grouting of bores hole 32mm

to 40mm dia with a depth up to 1.00 to 1.20mt.by means of cement,sand,grit, etc. with utilization of

aluminium poweder or ACC shrink compound 'N 'grout or equivelant any other bonding material as

approved by competant authority in suitable content with mixing ramming curring etc. complete

including with 20mm dia of M.S.anchor bar(Reinforcement)(The rate includes the cost of MSanchor

bar) as directed by E.I.C.

Providing form work of ply wood sheeting so as to give a smooth exposed finish including centering

(steel adjustable tubular supports). Shuttering strutting and propping etc. for any height of propping

140 and centering below supporting floor to ceiling , and removal of the same for reinforced concrete and SMT

plain concrete. for G.F+F.F+Stair Cabin. Wooden supports/props will not be allowed in any case.

Provising and fixing fiber glass mesh 145 GSM at RCC-masonry joints in plaster of buildings etc

completed as directed by EIC.

Providing and fixing premoulded compressible filler board in black colour confirming to

MoRT&H Specifications (Clause 1015), having minimum density 95kg/cum, non-staining with less

142 than 1% water absorption & compression recovery of 93% minimum as per specification for 40 mm SMT

wide expansion joint including cutting to required size and shape at all levels etc. complete as

Providing & laying Thermally Bonded Non woven Geotextile "Terram 1000" as per the manufacturer

specification or equivalanet below/Sides, tied securily by using lacing wire of fastensers etc

completed as directed E.I.C. The item includes the cost of labours, tools, tackls, dewatering, shoring,

shuttering, etc., complete.

Providing & laying 50-75 mm thick grouting with Non-shrink Grouting material of

CONBEXTRA-GP2, POLYGROUT-NS or equivalent, having the compressive strengh of

N/sq.mm mixing as per manufacturers specification including necessary shuttering, tool tackles labour

etc. completed as directed by Engineer in Charge

Trasportation girder/rail from GETCO's nearest store center to one end of the line including

loading and unloading(i) Withing range of 70 Km

DESCRIPTION UNIT APROX. QTY.

Providing and applying engineered concrete coating system for anti-corrosive and anti carbonation

applications in moderate to aggressive environments. Which provides protection against chloride ion

penetration,carbonation,UV radiations and weathering effects by menthod as "Proviging & Applying tar

extended two component coating system based on synthesized epoxy resin and amine adduct manufacture as per

technical specification of central electro chemical research (CERCI/CSIRKARAIKUDI) to achieve 400-450

microns DFT in two coats as directed. The item includes cleaning the surface before treatment as per

146 manufacturer specification. The coating system shall be done with EPOXY POLYAMIDE ZP PRIMER and SMT

followed by EPOXY POLYAMIDE shall comply the CERCI technology of " comprehensive repair &

protection of concrete/steel surface in wet & underwater codition". The rate shall be incusive of all materials

labour equivalent scaffolding etc.(Epoxy coating) Application will be done as per manufactures specification

which include surface preparation, coating as per manual specifications etc complete.

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind

abutments and between rturns as directed EIC.

Demolition including stacking of serviceable materials and disposal of unserviceable materials with

all lead and lift. 1. RCC Work

Demolition of Brick work and stone masonry including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.