4220 - Information & Broadcasting Renovation Work at Electronic Media Bhavan, Sector-16, Gandhinagar

Name of Work: Renovation Work at Electronic Media

Bhavan, Sector-16, Gandhinagar

VOLUME 3 – SCHEDULE –B

Civil, Plumbing, Interior & Electric Work

Volume 3: Billing of Quantities

TABLE OF CONTENTS

BILL OF QUANTITIES

B. ABBREVIATIONS

BILLING OF QUANTITIES – PART :

BILLING OF QUANTITIES PART :

Volume 3: Billing of Quantities

BILL OF QUANTITIES

1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General and Special

Conditions of Contract, Contract Data, Technical Specifications, and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given to provide a common

basis for bidding. The basis of payment will be the actual quantities of work ordered and carried out, as

measured by the Contractor and verified by the Engineer and `valued at the rates and prices bid in the priced

Bill of Quantities (above of below tender rate), where applicable, and otherwise at such rates and prices as the

Engineer may fix within the terms of the Contract. The % above and below shall be applicable to all items and

3. The rates and prices bid in the priced Bill of Quantities shall, except insofar as it is otherwise provided under

the Contract, include all Constructional Plant, labour, supervision, materials, erection, maintenance, insurance,

profit, taxes (including GST etc.) and duties, together with all general risks, liabilities, and obligations set out

or implied in the Contract.

4. % above or below shall be entered against the priced Bill of Quantities, whether quantities are stated or not.

5. The whole cost of complying with the provisions of the Contract is considered to be included in the Items

provided in the priced Bill of Quantities, and where no Items are provided, the cost shall be deemed to be

distributed among the rates and prices entered for the related Items of Work.

6. General directions and descriptions of work and materials are not necessarily repeated nor summarized in the

Bill of Quantities. References to the relevant sections of the contract documentation shall be made before

entering prices against each item in the priced Bill of Quantities.

1. All works shall be carried out as per BOQ and other specifications as directed.

2. Rates quotes include clearance of site (prior commencement of work and at its close) in all

respects and hold good for work under all conditions, site, moisture, weather etc.

3. Contractor shall state even "NIL" percentage, if no deduction is offered.

4. In R.C.C. Item where there is a change in Grade of Mix or change as per actual mix design

the difference of cement consumption shall be deduct from rate of original item at the rate of

star rate mentioned in this tender.

Volume 3: Billing of Quantities

5. One Percent of Amount of work done shall be recovered from the contractor's payment as

6. We hereby declare that, I/We have visited the site and fully acquainted myself/ourselves with

the local situation regarding materials and other factors pertaining to the works before

submitting this tender.

7. I/We hereby declare that I/we have carefully studied conditions of contract, specifications &

other tender documents of this work and agree to execute the same accordingly.

Volume 3: Billing of Quantities

B: ABBREVIATIONS

Abbreviation For

Rs / INR Indian Rupees

LS or SUM Lump Sum

Nr or No. Number

Lm or m Linear metre

KM or km Kilometre

Hct or ha Hectare

m2 or sqm-smt Square metre

m3 or Cum-cmt Cubic metre

KG or kg Kilogram

T or MT Tonne or Metric Tonne

PS Provisional Sum

IRC Indian Roads Congress

MORTH Specification Specifications for Road and Bridge Works

issued by the Ministry of Roads Transport &

Government of India

BIS Bureau of India Standards

Prov. Provisional

Eqpt. Hrs Equipment hours

P.O.L. Petroleum, Oil and Lubricants

Veh. Day Vehicle Day

Cu cm – cucm Cubic Centimetres

Volume 3: Billing of Quantities

1. The Bill of Quantities contains the following part Bills Tender no.

Renovation Work at Electronic Media Bhavan, Sector-16, Gandhinagar

2. Bidders shall price the Bill of Quantities in local currency only.

Sr No Work Item No. Total Amounts

Sr No Work Item No. Total Amounts

s 1 CIVIL WORK 1 to 45

2 PLUMBING WORK 46 to 76

3 INTERIOR WORK 77 to 125

4 ELECTRIC WORK 126 to 233

B CREDIT OF DISMANTLED ITEMS 1 to 31

C Total (A - B)

Approved tender make list

BILLING OF QUANTITIES – PART:

Name of Renovation Work at Electronic Media Bhavan, Sector-16, Gandhinagar

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

It Quantities Items of works Estimated rates UNI TOTAL

No Estimated In In words T AMOUNT

but may Figure ACCORDIN

or less ESTIMATE

1 1890.00 Dismentaling of sheet roofing including ridges, Hips, 56.79 Fifty six rupees Smt

Valleys, Gutters etc. stacking of serviceable materilas and and seventy

disposal of unserviceable materials with all lead and nine paise only

lift.(ii) A.C. sheet roofing.

2 92.00 Demolition of Brick work and stone masonry including 577.92 Five hundred Cum

stacking of serviceable materilas and disposal of seventy seven

unserviceable materials with all lead and lift. (ii) In rupees and

Cement Mortar. ninety two paise

3 380.00 Dismentaling tiled of stone floors laid in mortar including 50.11 Fifty rupees and Sqm

stacking of serviceable materilas and disposal of eleven paise

unserviceable materials with all lead and lift. only

4 750.00 Removing and scraping of old deteriorated plaster of any 20.55 Twenty rupees Sqm

thickness fromm wall / R.C.C member including stacking and fifty five

of serviceable material and disposal of unserviceable from paise only

site of work with all lead and lift

5 197.00 Dismentling doors, windows, ventilators etc. (wood or 197.09 One hundred EAC

steel) shutters including chowkhats architraves, holdfasts ninety seven H

and other attachment etc. complete and stacking them rupees and nine

within all lead and lift.(i) Not exceeding 3 Sq.M. in area. paise only

6 10.00 Dismentling doors, windows, ventilators etc. (wood or 263.90 Two hundred EAC

steel) shutters including chowkhats architraves, holdfasts sixty three H

and other attachment etc. complete and stacking them rupees and

within all lead and lift.(ii) Exceeding 3 Sq.M. in area. ninety paise

7 60.00 Excavation for foundation upto 1.5 m depth including 123.13 One hundred Cum

sorting out and stacking of useful materials and disposing twenty three

off the excavated stuff upto all lead.(A) Loose or soft soil rupees and

8 34.00 Excavation for foundation for depth from 1.5 m to 3.0 m 136.30 One hundred Cum

including sorting out and stacking of useful materials and thirty six rupees

disposing off the excavated stuff upto all lead.(A) Loose and thirty paise

or soft soil only

9 39.00 Filling available excavated earth (excluding rock) in 136.92 One hundred Cum

trenches. plinth, sides of foundations etc. in layers not thirty six rupees

exceeding 20 cm. in depth consolidating each disposited and ninety two

layer by ramming and watering. paise only

10 10.00 Filling in plinth with sand under floors including watering 481.70 Four hundred Cum

ramming, consolidating and dressing complete eighty one

Approved tender make list

11 92.00 Concrete Work : Providing and laying controlled cement 6705.97 Six thousand Cum

concrete M.250 and curing complete including the cost of seven hundred

formwork and excluding reinforcement for reinforced five rupees and

concrete work. ninety seven

12 853.00 Drywall Partition of 100mm : Providing and fixing Dry 2016.70 Two thousand Smt

wall partition of 98-100 mm thick stud partition which sixteen rupees

includes one layer of tapered edge 12.5 mm thick and seventy

(Conforming to EN 520:2004, Type D,F, I & R) is screw paise only

fixed with drywall Screws of 25 mm at 300mm Centers to

either side of 70 mm C stud (0.5mm thick having one

flange of 34 mm and another flange of 36mm made of GI

steel) placed at 610 mm center to in 72 mm floor and

ceiling channel (0.5 mm thick have equal flanges of

mm mage of GI steel). which is anchored to the floor &

ture ceiling using suitable anchor fasteners or metal

screws with nylon plugs. The boards are to be fixed to the

frame work with joints staggered to avoid leakage through

joints. A rockwool of good quality is provided between

the two boards. Finally square and tapered edges of the

boards are to be jointed and finished so as to have flush

look which includes filling and finishing with joiting

compound and joint paper tape.Make approved as per

tender and architect/EIC Selection.

13 127.00 Brick work using common burnt clay building bricks 4244.85 Four thousand Cu.M

having crushing strength not less than 35kg. / Sq.Cm. in two hundred

foundation and plinth and in Superstructure upto all floor forty four

level in Cement Mortar 1:5. (1- Cement : 5-fine sand)(B) rupees and

Conventional eighty five paise

14 73.00 (i) Half brick masonry in common brunt clay building 629.80 Six hundred Smt

bricks having crushing strength not less than 35 twenty nine

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4-coarse rupees and

sand ) in foundation and plinth & in superstructure upto eighty paise

all floor level. (B)Conventional only

15 76.00 Providing 10mm thick cement plaster in single coat on 135.30 One hundred Smt

brick/concrete walls for interior plastering upto all floor thirty five

level and finished even and smooth in (i)Cement mortar rupees and

1:3 (1-cement:3-sand) thirty paise only

16 1386.00 Providing 15mm thick cement plaster in single coat on 165.02 One hundred Smt

Rough (Similar)side of single or half brick walls for sixty five rupees

interior plastering upto all floor level and finished even and two paise

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) only

17 171.00 External Plaster: 20mm thick sand faced cement plaster 315.69 Three hundred Sqm

on walls upto height 10 metres above ground level fifteen rupees

consisting of 12mm thick backing coat of C.M. 1:3 (1- and sixty nine

cement : 3-sand) and 8mm thick finishing coat of C.M. paise only

1:1 (1 cement : 1-sand) etc. complete.for all floor level

Approved tender make list

18 105.00 Water Proofing Treatment in Sunken Portion of WCs & 528.15 Five hundred Smt

Bathroom: Providing and laying Water proofing twenty eight

treatment in sunken portion of WCS, Bathrooms etc. by rupees and

applying cement slurry mixed with water proofing cement fifteen paise

compound consisting of applying: (a) First layer of slurry only

of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @0.253 kg/sqm. This layer will be

allowed to air cure for 4 hours . (b) Second layer of slurry

of cement @ 0.242 kg/sqm mixed with water proofing

cement compound @ 0.126 kg/sqm.This layer will be

allowed to air cure for 4 hours followed with water curing

for48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners of pipes and

masonry with polymer mixed slurry.

19 1049.00 Waterproofing treatment on Terrace: Providing and 481.97 Four hundred Smt

applying Fibre reinforced Elestomeric liquid Water eighty one

proofing membrane with resilient Acrylic polymers rupees and

having Sun Reflectivity Index (SRI) of 105 on Top of ninety seven

concrete roof in top of concrete in three coats @ 10.76 paise only

litre/10 sq.m. One coat of self-priming of Elestomeric

water proofing liquid (delution with water in the ratio of

3:1) and two coats of undiluted elestomeric waterproofing

liquid (dry film thickness of complete application/system

not less than 500 microns). The operation shall be carried

out after scraping and properly cleaning the surface to

remove loose particles with wire brushes , complete in all

respect as per the direction of Engineer-in-charge.

20 27.00 Sunk Filling: Providing and filling AAC (Autoclaved 3374.16 Three thousand Cu.M

Aerated Concrete) blocks in sunken slab areas for three hundred

plumbing and sanitary works, including supply of AAC seventy four

blocks of required size (typically 600mm x 200mm x rupees and

100/150mm), laying in position with necessary , sixteen paise

ramming, leveling and compacting to achieve a uniform only

surface, all complete as per specifications and directions

of the Engineer-in-charge.

21 275.00 Anti-Termite System:Providing and laying of permanent 134.33 One hundred Smt

piping technology anti-termite treatment before flooring thirty four

work by installing LLDP (Low linear density rupees and

polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with thirty three

inbuilt pressure compensation chip every 30 cm interval paise only

in the tube, having working pressure of 2 Kg/cm2 and

release rate of 1.9 Itr/hour fixed by P-clips and nails. The

LLDP pipe shall be installed at the entire periphery of the

building and at internal network of building at a depth of

20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass

through a PVC elbow of minimum 32 mm ID at junction

box of wall and floor level, entering into a steel reinforced

grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction

boxes & test every junction during injecting chemicals for

termite control treatment. The anti termite chemical

Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall

be injected by the pressure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @

Ltr/SMT. The contractor shall submit approved line plan

for piping system and junction boxes dully approved by

Engineer-in-Charge with bond of 5 year warranty.(i)Anti

Approved tender make list

Termite chemical injected area (Chemical injecting incl.

22 11286.00 TMT Bar(FE 550 D) : Providing TMT Bar FE 550 D 94.99 Ninety four KG

reinforcement for R.C.C. work including bending, rupees and

binding and placing in position complete up to all floor ninety nine

level paise only

23 105.00 I.P.S Flooring: Providing and laying cement concrete 369.13 Three hundred Smt

flooring 1:2:4 (1-cement : 2- coarse sand : 4-graded stone sixty nine

aggregate 20mm nominal size) laid in one layer and rupees and

finished with a floating coat of neat cement. (B)50mm thirteen paise

24 15.00 PCC Work (M-15): Providing and laying cement 4142.82 Four thousand Cu.M

concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- one hundred

graded stone aggregates 20 mm nominal size) and curing forty two rupees

complete excluding cost of formwork and reinforcement and eighty two

for reinforced concrete work in (B) Slabs, landing, paise only

shelves, Balconis , Lintels, Beams, Girders and Cantilever

upto all floor level.

25 32.00 Filling in foundation and plinth with murrum or selected 277.14 Two hundred Cu.M

soil in layers of 20cm. thickness including watering, seventy seven

ramming and consolidating etc. complete. rupees and

26 105.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 1467.72 One thousand Smt

mm (average) base of cement mortar 1:6 ( 1 cement: 6 four hundred

coarse sand) on new surface or fixing on existing flooring sixty seven

by adhesive material including dismentaling of existing rupees and

flooring and jointed with color cement slurry including seventy two

finised with flush pointing & cleaning the surface etc. paise only

complete for antiskit

27 503.00 Dado Work : Providing and laying Lapato/ Matt /Glossy/ 2026.36 Two thousand Smt

Non skid,/Rustic finish Double Charged Vitrified tiles twenty six

in dado using minimum 10 mm thick tiles approved by rupees and

architect /client (size 1200 mm X600mm) fixed in dado thirty six paise

on 10 mm th. Cement plaster 1:3 (1 cement: 3 coarse only

sand) All surfaces must be dimensionally stable according

to IS 1443-1972, level, cured, undamaged,

compact,rigid,resistant, dry and free from any debonding

agents tiles fixed by approved tile adhesive and all

application shall be done under instruction of

manufacturer guideline and specification , and jointed

with 3mm to 5mm thick epoxy grouting of approved

shade and colour in proper line and level as per detailed

drawing / instruction all complete as per approved sample

by Architect, drawings and instruction of EIC. at all floors

/ all levels / all heights and all shapes .

28 275.00 Vitrified Flooring : Providing and laying Lapato / 2379.99 Two thousand Smt

Glossy/Matt/Rustic finish full body/ Double charged three hundred

Vitrified tiles flooring using minimum 10 mm thick tiles seventy nine

as per approved make list or selected by Architect , tile rupees and

size (1200 mm X 600 mm, 800 x 800, 900 x900 ) ninety nine

including preparing base for leveling with 20mm thick paise only

cement mortar 1:6 (1 cement : 6 coarse sand ) and jointed

with 3mm to 5mm thick epoxy grouting of approved

shade and colour in proper line and level as per detailed

drawing / instruction and approval by architect.The rate

shall be inclusive of protecting the flooring by plaster of

Approved tender make list

Paris and plastic and/or bubble top sheets. (At all floor

29 231.00 Providing and laying tactile tile (for vision impaired 1726.93 One thousand Smt

persons as per standards) of size 300x300x9.8 mm having seven hundred

with water absorption less than 0.5% and conforming to twenty six

IS:15622 of approved make in all colours and shades in rupees and

for outdoor floors such as footpath, court yard, multi ninety three

modals location etc., laid on 20 mm thick base of cement paise only

mortar 1:4 (1 cement: 4 coarse sand) in all shapes &

patterns including grouting the joints with white cement

mixed with matching pigments etc. complete as per

direction of Engineer-in-Charge.

30 57.00 Providing and fixing granite slab of 16mm-18mm 2956.11 Two thousand Smt

thickness for stone jamb on wall, framing etc. on the base nine hundred

of cement mortar 1:3 (1-cement : 3-sand) on new surface fifty six rupees

or fixing on existing location by adhesive material and eleven paise

including dismentaling of existing location and jointed only

with color cement slurry including finised with flush

pointing & cleaning the surface etc. To be laid or fixed as

per the direction of the Engineer-in-Charge

31 203.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter 706.90 Seven hundred Smt

locking concrete block 60mm thick with grade of concrete six rupees and

M300 pnumatic compressed / vibrated mechanically and ninety paise

as per approved design Confirming to IS 15658 : 2006 only

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

32 387.00 Providing and fixing pre-cast concrete kerb stone of gray 374.92 Three hundred Rmt

cement based concrete block 30cm length,30cm height seventy four

and 15cm thick of M250 grade concret as per approved rupees and

design and including excavation for fixing in proper line ninety two paise

and level,filling the joint with C:M 1:3 (1cement:3fine only

sand) etc complete.

33 8025.00 Applying two coats of putty & two coats of primer of 40.59 Forty rupees Smt

approved brand and manufacture on new wall surface to and fifty nine

give an even shade including thoroughly brushing the paise only

surface free from mortar dropping and other foreign

matter and sand papered smooth.

34 7855.00 Paint: Wall painting (two coats) with plastic emulsion 83.18 Eighty three Smt

paint of approved brand and manufacture on undecorated rupees and

wall surface to give an even shade including throughly eighteen paise

brushing the surface free from mortar droppings and other only

foreign matter and sand papered smooth.

35 2756.00 External Paint: Finishing wall with weather proof exterior 120.26 One hundred Sqm

emulsion paint on wall surface (two coats) to give an twenty rupees

required shape even shade after thoroughly brushing the and twenty six

surface to remove all dirt, and remains of loose powdered paise only

materials.etc complete

Approved tender make list

36 45.00 Veneer Flush Door With Glass strip : Providing and fixing 15244.94 Fifteen thousand Smt

factory-made solid core flush door Single/double shutter two hundred

with glass strip, 35 mm thick, conforming to IS:2202 (Part forty four

I), with commercial or teak veneer finish. Core made of rupees and

seasoned hardwood battens and cross bands hot-pressed ninety four

under high pressure. One vertical 100 mm wide paise only

clear/etched toughened glass strip (5–6 mm thick)

provided centrally or as per design, fixed with beading

and adhesive. Door edges lipped with hardwood. All

fittings (Hinges SS 15 cms length , Tubular Mortise

Handle in SSS Finish , Door Stop as per IS specifications.

Finished with PU polish or synthetic enamel paint. Rate

includes all materials, labor, tools,

37 20.00 Main Door - Providing and fixing 35 mm thick Double 16917.56 Sixteen Smt

shutters for Doors with Both side Veneer sheet with PU thousand nine

polish including Indian teak Wood Frame including black hundred

enamelled iron oxidized fixtures and fastenings and seventeen

necessary hardware such as Floor Spring, door stopper, rupees and fifty

door closer, handle, mortice lock etc, complete. six paise only

38 63.00 WPC Door: Providing and fixing WPC Door with Factory 7195.80 Seven thousand Smt

made single Extruded WPC (Wood composite polymer) one hundred

Solid door and Frame of size 65 x125mm and 25mm thick ninety five

WPC solid plain white coloured board with laminated rupees and

sheet of 1mm thickness with S.S accessories as per eighty paise

Architect's selection and as per direction of Engineer in only

charge. With all labour, material, Accessories,

transportation and scaffolding and all support system.

Make as per tender or Equivalent. All materials used shall

be environment-friendly, low-VOC, and GRIHA / IGBC

certified or equivalent green building rated products,

complying with sustainability requirements of the project.

39 23.00 Double Leaf Glass Door with floor Spring Pivot : 8172.28 Eight thousand Smt

Providing and fixing in position full height 12 mm thick one hundred

toughened glass door with all necessary accessories as per seventy two

approved selection by Architect / Engineer in charge. 12 rupees and

mm thick make customized clear toughened glass, edge twenty eight

polished prepared with stainless steel patch fittings with paise only

locking arrangement / fixing Each glass panel secured to

the floor by stainless steel patch fittings with locking

arrangement/ fixing Each glass panel secured to the floor

by stainless steel patch fitting item includes all necessary

fitting/ fixing , fixtures like Hardware system like (Corner

hinges with pivot, Glasklar Lock, Door Handle, key,

round shape lock with alluminium cover , Door stop)

complete as per Specification drawing approval and

instructions of the Architect / Engineer in charge. Rate

shall be inclusive of all material loading unloading at all

height and all floor sample mock shall be approved from

Architect / Engineer in charge. Provide floor spring

.etc.complete as per instruction given by Engineer in

charge/ Architect.

40 12.00 Providing and fixing Fully glazed toughened glass door 4163.73 Four thousand Smt

of 12mm thick frosted glass, including cutting, edge one hundred

polishing, and machine-beveled edges. Door to be fitted sixty three

with patch fittings (top, bottom, lock, and floor spring), rupees and

SS 304 grade hardware, and 600mm C-type SS handle. seventy three

All fittings as per IS: 12823. as per approved design and paise only

direction of Engineer-in-Charge.

Approved tender make list

41 9.00 Providing and fixing of Domal series Two Track Partly 4778.87 Four thousand Smt

Fix and Partly Sliding Window with colour anodized seven hundred

Section Frame of size Track 65 x 50.5 x 1.5 mm Thk seventy eight

@1.943kg/rmtr Slidding Shutter of size 65 x 27 x 1.5 mm rupees and

@ 0.951 Kg / Rmt with 5mm thick plain Modiguard Glass eighty seven

with Rubber gasket with help of Glazing Clip of size 26.7 paise only

x 15 x 1.2 mm and Inter clip using with of size 38.7 x

x 1.4 mm and using hardware material, clot, bearing, lock

and Labour etc. complete as approved by Engineer In

42 10.00 Ventilation : Providing and fixing standared extruded of 1175.56 One thousand Smt

alluminium section of size 63 mm x 38.10 mm x 1.2 mm, one hundred

@ Wt. 0.643Kg / mt with colour Powder Coated seventy five

alluminium frame for ventilation with 5 mm thick frosted rupees and fifty

glass as details etc complete for Ventilation. six paise only

43 14.00 Wash basin table top counter - Toilet / Wash Area 3878.17 Three thousand Smt

(Counter width- 600mm ) : Providing & fixing two layers eight hundred

of wash basin counter,first layer using 18mm grenite seventy eight

stone of approved shade and second layer using approved rupees and

shade and sample of Mirror finish Granite (Of Texture, seventeen paise

shed, Colour and pattern as approved by EIC ), joined only

together with 1:3 Cement mortar beding / approved tile

adhesive , to true plane & level or to slopes,or close

jointed with cement slurry with pigment of matching

shade and colour and finishing with the same, including

dedo 2'6" ht , cutting kotah & tile as per required shape

& size to fit Wash basin,& 3" to 9" facia with moulding,

nosing, chamfered front edges, fixing, disposal of debris

etc. finished as per design in detail drawing and

instruction of Architec/EIC.The sample mock shall be

approved from Architect/EIC.

44 120.00 Providing and fixing Expansion joint including 3978.14 Three thousand Rmt

Dismentalling & Removing old expansion joint by nine hundred

necessary equipment and tools. The expansion joint gap seventy eight

shall be filled by baker rod. The polysulphide sealent shall rupees and

be applied in the gap. Expansion joint belt of Size 8" fourteen paise

Width upto 3mm thick shall be applied with epoxi only

chemical for joint of expansion joint belt.

45 120.00 Providing and fixing Expansion joint including 1082.52 One thousand Rmt

Dismentalling & Removing old expansion joint by eighty two

necessary equipment and tools. The expansion joint gap rupees and fifty

shall be filled by baker rod. The polysulphide sealent shall two paise only

be applied in the gap, average thickness of sealent should

46 23.00 Providing, laying and jointing in true line and level 72.65 Seventy two Rmt

U.P.V.C pipe (SCH - 40) of following dia. including rupees and sixty

fittings as approved by Engineer - in - charge. Pipe shall five paise only

be fixed on the wall with the help of clamp at every

mm center to center or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.[A] 15 mm.

47 30.00 Providing, laying and jointing in true line and level 91.84 Ninety one Rmt

U.P.V.C pipe (SCH - 40) of following dia.including rupees and

fittings as approved by Engineer - in - charge. Pipe shall eighty four

be fixed on the wall with the help of clamp at every 2000 paise only

mm center to center or shall be concealed as directed

including necessary fittings etc. including testing of pipe

Approved tender make list

and joints and fixing the same with adhesive

solvent,including cost of all materials.[c] 25 mm.

48 39.00 Providing, laying and jointing in true line and level 148.12 One hundred Rmt

U.P.V.C pipe (SCH - 40) of following dia.including forty eight

fittings as approved by Engineer - in - charge. Pipe shall rupees and

be fixed on the wall with the help of clamp at every 2000 twelve paise

mm center to center or shall be concealed as directed only

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent,including cost of all materials.[c] 40 mm.

49 65.00 Providing laying and jointing in true line and level 50mm 195.67 One hundred Rmt

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including ninety five

fittings as approved by Engineer In Charge. Pipe shall be rupees and sixty

fixed on the wall with the help of clamp at every two seven paise only

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.[D] 50mm

50 30.00 Providing and fixing concealed center point to wall 253.82 Two hundred Rmt

ceiling & floor CPVC (SDR 13.5) PIPE having National fifty three

Sanitation Foundation (NSF) seal for potable water of rupees and

following dia. nominal bore tube fittings and clamps eighty two paise

including making good the wall, ceiling and floor etc. only

complete. [C] 25 mm

51 54.00 Providing laying and jointing in PVC SWR pipes IS 144.40 One hundred Rmt

13592 for Drain - 75 mm dia including fittings as forty four

approved by Engineer In Charge. Pipe shall be fixed on rupees and forty

the wall with the help of clamp at every two metre C/C or paise only

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials.[D] 75mm. To be fitted as per the directions of

Engineer-in-Charge.

52 300.00 Providing laying and jointing in PVC SWR pipes IS 679.68 Six hundred Rmt

13592 for Drain - 160 mm dia including fittings as seventy nine

approved by Engineer In Charge. Pipe shall be fixed on rupees and sixty

the wall with the help of clamp at every two metre C/C or eight paise only

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials.[] 160mm. To be fitted as per the directions of

Engineer-in-Charge.

53 55.00 Providing and fixing to wall ceiling and floor 10.0 Kg. 339.05 Three hundred Rmt

F/Cm2 working pressure poluthene pipes of the following thirty nine

outside Dia. Low densidy, complete with special falnge rupees and five

compression type fittings, wall clipsetc. including making paise only

good the wall ceiling and floor.(G)110 mm

54 55.00 Providing and fixing to wall ceiling and floor 10.0 Kg. 280.23 Two hundred Rmt

F/Cm2 working pressure polythene pipes of the following eighty rupees

outside Dia. Low densidy, complete with special falnge and twenty three

compression type fittings, wall clipsetc. including making paise only

good the wall ceiling and floor.(F) 75mm

55 15.00 Providing and fixing S.W. gully trap with C.I. grating 1246.92 One thousand Each

brick masonry chamber and water tight C.I. cover with two hundred

frame of 300mm x 300mm size (inside) with standard forty six rupees

weight.(i) Square mouth traps.(B) 150mm x 100mm size and ninety two

P or R type paise only

Approved tender make list

56 10.00 Constructing Manhole with R.C.C. top slab in 1:2:4 mix 19349.63 Nineteen Each

(1 cement :2-coarse sand : 4-graded stone aggregate thousand three

20mm nominal size) foundation concrete 1:3:6 mix (1- hundred forty

cement : 3 coarse sand :6-Brick bats 40 + 50mm size) nine rupees and

inside plastering 15mm thick with Cement Mortar 1:3 (1- sixty three paise

Cement : 3-coarse sand) finished with a floating coat of only

neat cement and making channels in cement concrete

1:2:4 mix (1-Cement :2 Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(2) B type depth 1.50 Metre for 150mm diameter sewer.

57 36.00 Providing and fixing PVC SWR Nahni trap IS 14735 for 599.64 Five hundred Each

drain -100 mm diameter with jali of the following nominal ninety nine

diameter of self cleaning design wit c.I scread down or rupees and sixty

hinged grating including the cost of cutting and making four paise only

58 26.00 Providing and fixing Brass Handle Metal Valve as per 1130.14 One thousand Each

directed by engineer in charge. (B) 25mm dia. one hundred

59 16.00 Providing and fixing Brass handle Metal Valve as per 4235.99 Four thousand Each

directed by engineer in charge. (D) 50mm dia. two hundred

60 24.00 Providing and fixing wash down wall mounting/ floor 20965.08 Twenty Each

mounting EWC -rimeless having siphonic flush of thousand nine

approved shade, conforming to Pattern 2 of IS: 2556 (Part hundred sixty

-II), with SWR Self it Soil PVC pipe and plug, bend as five rupees and

per specifications; glazed vitreous / Colored European eight paise only

Water Closet with Cistern Dual Flush System tank (IS-

2326), with grouting the CI chair inside the floor/wall,

rubber gaskets, connecting PVC 110mm dia soil pipe with

PVC coupling, nuts, traps, mounting cistern on WC., and

solid Varity heavy duty plastic seat cover as per IS-2548,

cutting and making jari work etc. complete. [Including

Seat cover / Outlet Gasket / Inlet Gasket].

61 16.00 Providing & fixing white vitreous china flat back urinal 14051.83 Fourteen Each

of size below mentioned size as per IS- 2556 (Part-2 ) with thousand fifty

C.I. hangers and 15mm dia. C.P. spreader, Push Cock, one rupees and

Waste Pipe and pipe to wall with C.P. flange complete eighty three

including cutting and making good the walls and floors paise only

wherever required.485x310x710 mm.Waste Coupling

62 21.00 Providing and fixing glazed vitreous Wash Basin 7840.13 Seven thousand Each

Round/Ovel/Rectangular Over-Counter, of 450 mm eight hundred

dia./Size, with supporting in stone flooring, 1 no, Waste forty rupees and

Pipe,1.2m Flexible Pipe [1No] and waste coupling. thirteen paise

Colour/pattern should be approved by Architect or only

Engineer Incharge Etc complete.

Approved tender make list

63 24.00 Health Faucet: Providing and Fixing Health Faucet ABS 1701.60 One thousand Each

body with wall hook and 1 meter crome plated PVC hose seven hundred

pipe of approved quality and conforming to one rupees and

Manufacturers Standards, to the wall surface with sixty paise only

necessary fixture / accessories ,necessary holes and

grooves work and making it well finished etc. complete

as per drawing and details.

64 32.00 Angular cock W/O flange: Providing, fixing and testing 2148.78 Two thousand Each

and commissioning of 15mm CP brass angle valve with one hundred

CP copper connecting pipe 375 mm long along with nuts, forty eight

washer and brass flange complete as per drawing and rupees and

details(for wash basin control valves) seventy eight

65 21.00 Pillar cock: Providing and fixing brass pillar tap, capstan 3716.80 Three thousand Each

head, screw down high pressure with screws, shanks and seven hundred

back nuts. (i) 15mm dia. To be fixed as per the sixteen rupees

instructions of the Engineer-in-Charge. and eighty paise

66 48.00 Bib Cock : Providing and fixing Bib Cock with Wall 2729.53 Two thousand Each

Flange of following size (ii) 20mm dia seven hundred

rupees and fifty

three paise only

67 24.00 Providing and fixing toilet paper holder.(A) C.P. Brass 427.99 Four hundred Each

68 21.00 Providing and fixing C.P. brass towel rail comlete with 616.42 Six hundred Each

C.P. brass brackets fixed to wooden plugs with C.P. brass sixteen rupees

scews.(B) 600mm x 20mm size. and forty two

69 14.00 Providing and fixing 600mm x 450mm bevelled edge 3182.99 Three thousand Smt

mirrror of superior glass mounted on 6mm thick A.C. one hundred

sheet or plywood sheet and fixing to wooden pluge with eighty two

C.P. brass screws and washers. rupees and

70 21.00 Providing and Fixing Soap Dispenser in Polished chrome 1945.51 One thousand Each

of approved make and conforming to Manufacturers nine hundred

Standards. As per approved and selection by forty five rupees

architect/consultant and fifty one

71 16.00 Providing & Fixing Waterless and Odourless Urinal kit in 10204.94 Ten thousand Each

Urinal Poat including all material, labour etc. complete. two hundred

The material grade of the same should be SS 304 with four rupees and

height of 90 mm and diameter of 39 mm along with ninety four

membrane flap technology made with respect to IS- paise only

2963:1979. It should be assembled and fixed as per the

direction of the Engineer-in-Charge.

72 10.00 Providing and fixing PVC SWR Vent Cowl 110 mm dia 28.44 Twenty eight Each

with mesh at the exterior surface to Avoid Birds Entering rupees and forty

For Bathroom/Office/Kitchen Ventilation/Exhaust Fan of four paise only

approved company at the output for the toilets. It should

be assembled and fixed as per the direction of the

Engineer-in-Charge.

Approved tender make list

73 2.00 S.S Kitchen Sink: Providing and fixing Kitchen sink with 2326.66 Two thousand Each

C.I. or M.S. brackets, painted white including cutting three hundred

holes in walls and making good the same but excluding twenty six

fittings. (C)Vitreous China Sink. (i) 600mm x 450mm x rupees and sixty

150mm size six paise only

74 2.00 Kitchen Sink Cock with Extended Swinging Spout: 2671.45 Two thousand Each

Providing and Fixing Single lever Deck Mount Kitchen six hundred

Sink Cock with Extended Swinging Spout (Wall Mounted seventy one

Model) With Wall Flange, in Polished Chrome of rupees and forty

approved make and conforming to Manufacturers five paise only

75 3.00 Providing and fixing Disabled toilet Hand Rail Grab bar 26772.58 Twenty six Pair

300mm Long, Stainless Steel Grab Bar Stainless Steel of thousand seven

approved quality as per IS and shall be approved by hundred seventy

Engineer In Charge two rupees and

fifty eight paise

76 12.00 URINAL PRIVACY divider - Providing & fixing 8478.95 Eight thousand Each

Basin/Urinal Partition design privacy divider or minimal four hundred

touch privacy divider of following 8mm thick Glass size seventy eight

450mm(D) x 900mm(H), designed with slot for minimal rupees and

wall touch for better hygiene. Fixed on wall with the help ninety five paise

of SS grade 316 brackets. A quality standards with only

Antivirus, Antibacterial and Antifungal properties of

Jaquar Types and shape of urinal privacy divider as per

Architect's selection and as per direction of Engineer-in-

charge. Make as per tender or Equivalent.

77 1890.00 Gypsum Ceiling: Pro. And fixing single layer water proof 606.95 Six hundred six Smt

gypsum board 12.5mm thick sections using water proof rupees and

board of size 1220mm x 1830mm x 8.0mm suspended by ninety five paise

GI suspender channel of size 25mm x3 mm with only

intermediate channelog size 18mm x 40mm x 0.8mm at

1220 mm center to center ceiling section of size 40mm x

35mm x 0.55mm at 457mm c/c and perimeter channel A

of size 20mm x 27mm x 30mm x 0.5mm at edges & drops

incl. paper taps and sofit cleat, anchor fastener, scoch bolt

connecting cleat, joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc.

comp. as per detail drawing as directed.

78 68.00 Glass Partition with Slim Alluminium Framed : Providing 5035.10 Five thousand Smt

and fixing High-grade alluminum powder coated profile thirty five

frame Dimensions: 25mm x 45mm and with 10mm to rupees and ten

12mm thickness of Glass with ,clear, frosted, laminated, paise only

or mesh glass, catering to various privacy and aesthetic

preferences with Some systems offer acoustic

performance and Require height Options include fixed

panels, Glass shutter Door, sliding doors, and foldable

systems, allowing customization to fit specific spatial

needs of Achitect/EIC.

Approved tender make list

79 731.00 Providing & Fixing Flase Ceiling of Aerolight light 1163.92 One thousand Smt

weight calcium silicate tiles Tegular Edge of Size 595x one hundred

595 x 15 mm densified edge, having 100% humidity sixty three

resistance and incombustible as per BS 476 Part-4 with rupees and

thermal conductivity of 0.043 W/m 0kC, with NRC of 50 ninety two paise

and approved surface design to be placed in the grid only

suspended ceiling with border of gypsum sheet. Grid

system made of Galvanised steel section with main "T"

runner 3.6 mt long with size 38x24x0.30mm spaced

at1200mm c/c and cross "T" of 1.2 mt long with size

24x24x0.30mm spaced between main "T" at 600mm c/c

to form agrod of 600x1200mm and secondary cross "T"

of length 600mm to be inter locked at middle of the

600x1200mm panel to be fixed all around the peri meter

of the wall.The main "T" runner to be suspended from the

ceiling using GI sloted cleats and 50mm long dash

fastners, 4mm GI adjustable rods with galvanised level

clips with all labour and material and as directed by

Engineer Incharge

80 54.00 Veneer Panelling: Providing and fixing Natural Veneer 6287.15 Six thousand Sq.M

on plywood panelling as per following: 1) fixing 3.5/4.0 two hundred

mm thick natural veneer of approved wood, shade, pattern eighty seven

and design using adhesive, nails and required hardware rupees and

2) fixing edges using solid wooden batten. 3) Waterbased fifteen paise

PU/ plant resin based monocoat polishing work shall be only

carried out as specified 4) The rate shall be for all heights,

all places, all places, etc complete as directed by engineer

in charge. Actual laid area shall be measured and paid

without considering any westage. Provide and install as

per the directions provided by the Engineer-in-Charge

81 78.00 Slatted Panelling : Manufacturing, supply, arrangement 4519.65 Four thousand Sq.M

and keeping in good condition until project completion five hundred

acoustic slatted panels of 12 mm thickness of any height nineteen rupees

as required to be fitted at all heights/all levels with and sixty five

necessary arrangement like plywood or similar etc with paise only

the help of fixtures such as bonding agents such as

fevicols, screws of any diameter or similar complete of

design provided by the architect and should be installed

as per the directions provided by the Engineer-in-Charge.

Make as tender or equivalent

82 59.00 Polyester Fiber Panelling : Providing and Fixing Polyster 3385.68 Three thousand Sq.M

fiber sheet on Base Layer of plywood sheet with three hundred

necessary Glue, screw etc. required accessories with all eighty five

labour, scaffolding and support system, as per selection of rupees and sixty

Architect and in the direction of Engineer-in-Charge. eight paise only

Make as per tender or Equivalent.

83 159.00 Acoustic Fabric panelleing : 6388.25 Six thousand Sq.M

Providing and supplying Acoustical Wall Paneling made three hundred

with stretch fabric (Inherently fire retardent) fixed with eighty eight

PVC grippers. Backing to be done with 50 mm thick rupees and

rockwool slabls of 140 kg/m3 density and 25 mm thick twenty five

woodwool board. Fabric to be of upto 2000 rs/meter as paise only

per selection of architect and EIC. Fixing to be done

ensuring the line and level of the panels as per give

design. Installation to be carried out by trained Installation

team & to be carried out as per recommended procedure

of the architect and OEM. Warranty Certificate and Test

Reports for NRC and fire rating shall be provided by

Approved tender make list

Vendor. To be fixed as per the instructions of Engineer-

84 7.00 MDF+CNC : Providing and fixing CNC/Laser cut 7259.90 Seven thousand Sq.M

waterproof HDHMR (High-Density High Moisture two hundred

Resistance board) panel of 12mm thickness fixed finished fifty nine rupees

with PU Paint and as required provide a backing of and ninety paise

garware translucent film. Design and pattern as per only

architect's drawing and work to be done as per direction

of Engineer-in-charge. With all material, labour,

accessories, hardware, transportation with all scaffolding

& support sytem. Make as per tender or Equivalent.

85 128.00 Pelmet Work: Providing and fixing AC Pelmet of 2903.75 Two thousand Sq.M

Wooden .Design as per selection of Architect and as per nine hundred

direction of Engineer -in-charge. three rupees and

86 48.00 Providing and fixing Zebra blind roller curtain with 4181.40 Four thousand Smt

superior quality Acmeda Mechanism including all one hundred

necessaries fitting like breaket chain etc. complete as per eighty one

instruciton of Engineer in charge. rupees and forty

87 169.00 Providing and fixing Half Partition with using aluminium 3371.86 Three thousand Smt

Pipe 50 x 25mm framing, 12mm Plywood, VENEER & three hundred

Lamination with solid wood moulding etc. Completed. seventy one

All work includes required all necessery hardware and rupees and

labour.Work includes cost of site installation complete as eighty six paise

direceted by architect and concern engineer in charge. only

88 8.00 Signage :Manufacturing, supply, arrangement and 16261.00 Sixteen Sq.M

keeping in good condition until project completion thousand two

SS/Wooden/MDF signage using SS 304 hundred sixty

grade/Plywood/MDF material brush finish 1.5mm thick one rupees only

sheet with letter, numbers, graphic, symbol etc made by

acid etching process with duco paint/ powder coating as

per drawings and instruction of the architect. All required

CNC cutting/ laser cutting shall be carried out as per

drawing. The plate shall be fixed on brick/ RCC wall/ ply/

cement board/ furniture/ door with the necessary fixing

hardware like SS stud, fastner, self adhesive double side

tape etc. complete for all floors and all height. The rate

shall be inclusive of all material, laour, hardware

scaffolding etc.

89 8.00 Providing and fixing of Floor Main Enterance Board 11981.86 Eleven thousand Smt

Veneer Finish madeup of 18mm thick BWR plywwod of nine hundred

standard with at back, 3 to 5 mm thick veneer sheet eighty one

including PU Polish, batten border and name plate rupees and

madeup of S.S. Grage 304 having thickness upto 2.5mm eighty six paise

having size as per requirement including computerized only

printing in SS plate to board complete and shall be

approved by Engineer In charge/Architect.

90 171.00 Providing P.O.P. Punning upto 20 mm thick incl. Jali with 652.76 Six hundred Smt

groove for proper bonding with wall & leveling in line & fifty two rupees

level etc. Complet as per tender or equivalent and seventy six

91 14.00 Veneer False Ceiling: Providing and fixing Veneer false 5740.55 Five thousand Smt

ceiling work using G I Permiter, G I intermediate, G I seven hundred

ceiling section, Angle,12 mm thick Plywood , 3.5 to 4 forty rupees and

mm thick Veneer of approved make and shade, Polishing fifty five paise

work shall be carried out as specified of approved make, only

shade and texture.

Approved tender make list

92 5.00 Supply and execution of decorative Lime Plaster + Finish 5623.98 Five thousand SMT

on wall surfaces using natural lime, applied over prepared six hundred

background with traditional technique and custom twenty three

designs as per approved patterns. Includes surface rupees and

preparation, finishing, sealing, and protective coating if ninety eight

required. Complete in all respects paise only

93 62.00 Providing and fixing in position 4.5" height English / 1515.00 One thousand Each

Gujarati letters made from 1.0mm thick stainless steel five hundred

sheet with Bronze Finish as directed by Engineer in fifteen rupees

charge with all material, hardware, accessories and fitting only

94 24.00 Providing and fixing in position 7.5" height English / 2121.00 Two thousand Each

Gujarati letters made from 1.0mm thick stainless steel one hundred

sheet with Bronze Finish as directed by Engineer in twenty one

charge with all material, hardware, accessories and fitting rupees only

95 2.00 Providing and fixing in position Brass Ashok Stambh of 18180.00 Eighteen Each

15" height, made from high-grade brass material with fine thousand one

workmanship and detailed engraving as per standard hundred eighty

design, including the National Emblem with four lions, rupees only

Dharma Chakra, and base animals. The item shall be

polished for a smooth, glossy finish. Complete with all

necessary materials, hardware, accessories, and fittings,

etc., and installed as directed by the Engineer-in-Charge

96 5.00 Cane Panelling in Glass Sandwich : Manufacturing, 6302.23 Six thousand Smt

supply, arrangement and keeping in good condition until three hundred

project completion Cane sheet of any height as required two rupees and

to be fitted at all heights/all levels in Wall panelling and twenty three

false ceiling work as per design & drawing with necessary paise only

arrangement like plywood or similar etc with the help of

fixtures such as bonding agents, screws and framing with

of any diameter or similar complete of design provided by

the architect and should be installed as per the directions

provided by the Engineer-in-Charge.

97 49.00 Supply and execution of Decorative printed painting on 5812.15 Five thousand Smt

Canvas and fixed on wooden and glass frames using eight hundred

traditional or custom designs as per approved patterns. twelve rupees

Includes surface preparation, carving, finishing, sealing, and fifteen paise

and protective coating if required. Complete in all only

98 9.00 INVISIBLE GRILL WORK:Providing and fixing 1719.01 One thousand Smt

Invisible grills for balconies made with high-tensile seven hundred

stainless steel cables ss 316 grade 18 gauge with spacing nineteen rupees

not more than 50 mm , coated with nylon for rust and and one paisa

dust prevention , to provide safety from entering birds and only

provide aesthetics and safety by maintaining an

unobstructed view. The grill is made partially openable so

that it is fixed on a periferal alluminum tube section of

mm x 25 mm and 2mm thick with anodizing 10mm

fastner fixed on the balcony with standard hardware like

hinges, screws and stoppers to make partially openable .

The openable and fixed section are to be fitted with Tube

section for firm gripping.The anodizing colour is as per

the drawinga and architect selection.

Approved tender make list

99 1085.00 Wooden Skirting: Providing and fixing wooden skirting 716.36 Seven hundred Rmt

of size as specified, made from seasoned hardwood, sixteen rupees

machine cut to accurate profile, securely fixed to wall and thirty six

with approved adhesive or screws, including mitered paise only

joints at corners. Visible surface finished with high-

quality PU (Polyurethane) polish in desired shade, applied

in multiple coats with proper sanding between coats to

achieve smooth, durable, and glossy finish. complete of

design provided by the architect and should be installed

as per the directions provided by the Engineer-in-Charge.

100 4.00 Providing and placing low-height TV unit with Cane 19236.91 Nineteen Smt

Sheet made of approved quality material such as thousand two

laminated plywood/MDF, including drawers, shelves, and hundred thirty

cable management provisions as per approved design. six rupees and

Finished with laminate/polish/paint, complete with ninety one paise

hardware fittings and accessories, as directed by only

Engineer-in-Charge, complete in all respects as per

drawing and specifications.

101 18.00 Providing and fixing Structural Glazing System 6248.87 Six thousand Smt

consisting of 6 mm thick reflective toughened glass two hundred

panels fixed with structural sealant over aluminium frame forty eight

sections (vertical mullions and horizontal transoms) of rupees and

approved make, complete with EPDM gaskets, cleats, eighty seven

fasteners, anchor bolts, and necessary accessories, paise only

including cutting, fixing, aligning, sealing, and making

watertight joints, all complete as per architectural drawing

and direction of Engineer-in-Charge

102 17.00 Rolling Shutter - Providing and fixing rolling shutters of 3554.40 Three thousand Smt

approved make made of 80 mm wide M.S. laths inter- five hundred

locked together through their entire length and jointed fifty four rupees

together at the ends by end locks mounted on specially and forty paise

designed pipe shaft with bracket plates, guide channels only

and arragements for inside and outside locking with push-

pull operation including the cost of hood cover and spring

etc. complete.(A) Shutters having width below 3.5 M.

103 1.00 Providing and fixing Premium High Back Revolving 50500.00 Fifty thousand Each

Chair of avg dimension 700x700x1100 mm (WxDxH) five hundred

having artificial leather upholster finish and shall be rupees only

selected by Engineer In Charge / Architect

104 21.00 Providing and fixing High Back Revolving Chair of avg 25250.00 Twenty five Each

dimension 700x700x1100 mm (WxDxH) having artificial thousand two

leather upholster finish and shall be selected by Engineer hundred fifty

In Charge / Architect rupees only

105 327.00 Providing and fixing Medium Back Revolving Chair of 12625.00 Twelve Each

avg dimension 670x670x1010 mm (WxDxH) having thousand six

febric + NET / Mesh finish and shall be selected by hundred twenty

Engineer In Charge / Architect five rupees only

106 44.00 Providing and fixing Low Back Revolving Chair of avg 8080.00 Eight thousand Each

dimension 570x540x1010 mm (WxDxH) having febric + eighty rupees

NET / Mesh finish and shall be selected by Engineer In only

Charge / Architect

107 6.00 Providing and fixing of Stainless Steel Tandem Seating 10100.00 Ten thousand Each

Bench Three-seater, full-steel construction (SS 304 grade one hundred

preferred), perforated seat/back panels. Chrome-plated or rupees only

polished stainless steel frame and legs with floor

fasteners/adjustable glides. Includes integral stainless

steel armrests on both ends

Approved tender make list

108 13.00 Providing and fixing of Stainless Steel Tandem Seating 12120.00 Twelve Each

Bench Four-seater, full-steel construction (SS 304 grade thousand one

preferred), perforated seat/back panels. Chrome-plated or hundred twenty

polished stainless steel frame and legs with floor rupees only

fasteners/adjustable glides. Includes integral stainless

steel armrests on both ends

109 6.00 Wooden chairs - Providing and placing Decorative chair 35350.00 Thirty five Each

with seasoned teak wood frame and armrest, upholstered thousand three

with approved shade fabric over high-density PU foam hundred fifty

cushion on seat and back, including PU polish, complete rupees only

in all respects as per approved design and direction of

Engineer-in-Charge

110 1.00 Glass Round Coffee Table with Four Decorative Chair : 53025.00 Fifty three Set

Providing and supplying Four Decorative Chair & Coffee thousand twenty

Table with Glass top made with using Kiln dried & treated five rupees only

fine quality C.P. Teakwood (M5) legs fixed with

necessary fixtures and fastening (Hardware) (M14)

inclusive of approved melamine polishing (M29) work.

Top part of coffee Table covered with 8 mm TH

toughened glass (M27) with polished edges fixed with

nylon buffers with SS studs for top glass support.

Complete as per architect’s drawings and as per

instruction of architect & engineer in charge.

111 1.00 Providing & Placing in position table of size 2700 X 900 150037.4 One lakh fifty Each

X 750 mm with modesty panel having 3mm thick veneer thousand thirty

Sheet , with side unit of size 1050x450x750 mm and Back seven rupees

unit of size 2700x450x750 mm having 3mm thick veneer and forty paise

sheet made on Visiable side and 1 mm thick Laminate on only

other Side from 18mm BWR calibrated plywood,

teakwood batten,drawer channel including all assecaries

like SS hinges, lock, handles, stoper, magnatic cather etc.

complet along with Footrest given by engineer in

charge/Architect.

112 79.00 Providing Table of Any Size made from 36 mm thick 11010.69 Eleven thousand Smt

Plywood Using 18/19 mm Plywood, laminated with ten rupees and

1.0mm thick lamination sheet on top & front Side and sixty nine paise

Inside lamination with hot melt glue as per instructions of only

Engineer In Charge.

113 208.00 Workstation Size:-Workstation Table of Any Size 9496.33 Nine thousand Smt

TABLE TOP :-Top made from 18-19mm (2 Layer) four hundred

BWR calibrated plywood with as per approved laminate ninety six

LEGS & Beam :- MS Rectengular section 50x25x1mm rupees and

MODESTY :- 8mm and 12mm BWR calibrated plywood thirty three

with as per approved laminate paise only

TABLE SEPARATOR - 450mm High 8mm Clear Glass

with Frosted Film Table Side Separator to be provide at

anyone side of Table.

Keyboard Trayst also provide complete as per instruction

given by engineer in charge/Architect.

114 12.00 Providing & Placing in position Conference table of size 23010.63 Twenty three Smt

required dimensions with modesty panel having Corian thousand ten

top of 6mm thickness ,Acrylic Solid Surface Finish, rupees and sixty

Surface Finish should be Glossy Finish, Colour: White three paise only

and edges of veneer and having 1mm thick Laminate on

sides and inside area made from 18mm and 12mm BWR

calibrated plywood of standard teakwood batten complet

as per instruction given by engineer in charge/Architect.

Approved tender make list

115 28.00 Providing & Placing in position Corner table of size 600 7575.00 Seven thousand Each

X 600 X 450 mm with Varnish Polish finish made from five hundred

Solid teakwood and Table Top made from seventy five

Teakwood/Glass complet as per instruction given by rupees only

engineer in charge/Architect.

116 21.00 Providing & Placing in position Center table of size 900 12120.00 Twelve Each

X 600 X 450 mm with Varnish Polish finish made from thousand one

Solid teakwood Table Top made from Teakwood/Glass hundred twenty

complet as per instruction given by engineer in rupees only

charge/Architect.

117 486.00 Providing & fixinging in position Storage Unit of size 11639.05 Eleven thousand Smt

having any Height and Depth - 450mm with 1mm thick six hundred

lamimate finish made from 18mm BWR Calibrated thirty nine

Plywood of standard make along with batten patti at sides rupees and five

and edge with PU polish complete as per instruction given paise only

by engineer in charge/Architect.

118 205.00 Providing and fixing Drawer unit, size 450x450x600mm 5388.35 Five thousand Each

as per design provided by the architect with drawer with three hundred

lock of size 450x450x200mm and shutter made from 18 eighty eight

mm calibrated plywood of standard make having 0.8mm rupees and

thick laminate finish with drawer channel including all thirty five paise

assecaries like lock, handles, etc. complet as per only

instruction given by engineer in charge/Architect

119 4.00 Providing & Fixing Single Seated sofa as per instruction 25250.00 Twenty five Each

given by engineer in charge/Architect. using tropical thousand two

seasoned hardwood and partical board legs material hundred fifty

comes in MDF wooden facia with melemine coating rupees only

comes in synthetic leather with nylon polyster stiching

seat and back foam come in 28d polyurithine slab stock

foam with 1" recron layer and bonding solution will be

120 18.00 Providing & Fixing Two Seated sofa as per instruction 35350.00 Thirty five Each

given by engineer in charge/Architect. using tropical thousand three

seasoned hardwood and partical board legs material hundred fifty

comes in MDF wooden facia with melemine coating rupees only

comes in synthetic leather with nylon polyster stiching

seat and back foam come in 28d polyurithine slab stock

foam with 1" recron layer and bonding solution will be

121 24.00 Providing & Fixing Three Seated sofa as per instruction 50500.00 Fifty thousand Each

given by engineer in charge/Architect. using tropical five hundred

seasoned hardwood and partical board legs material rupees only

comes in MDF wooden facia with melemine coating

comes in synthetic leather with nylon polyster stiching

seat and back foam come in 28d polyurithine slab stock

foam with 1" recron layer and bonding solution will be

122 100.00 Perforated Gypsum Ceiling: 1742.25 One thousand Smt

Providing and fixing Anutone - Snazz Pixel Taper seven hundred

Acoustic Ceiling, having total light and sound absorption forty two rupees

quality, T24 conceil grid type textured ceiling having and twenty five

panel size 1195 x 1195 mm or as directed, Glassfiber core paise only

and thickness upto 15mm or as directed with having

density 120kg/cum or as directed shall be fixed on

suspended GI suspender and internal channel as per

manufacturer's specification and as directed by EIC.

Approved tender make list

123 14536.00 MS Section -Steel work, welded in built up sections 88.38 Eighty eight Kg

framed work including cutting, hoisting, fixing in position rupees and

and applying a priming coat of red lead paint. (A)In beams thirty eight

and joists, channels angles Tees, flats, with connecting paise only

plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the

124 16.00 Providing and fixing PUF Insulated continueous 3146.83 Three thousand Smt

sandwich panels for roofs of total thickness not less than one hundred

30 mm made out from continue line method.Panel shall forty six rupees

have 0.5 mm thick pre coated GI sheet on both side of and eighty three

Polyurethane foam with external face being corrugated in paise only

shape for GI and PU foam both material.The crest height

of the panel shall be of 35mm minimum wiht 250mm c/c

pitch. The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have

zinc coating of 120 gsm as per IS:277 , 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-

18 micron.The PPGI Sheet shall have protective guard

film of minimum 25 microns to avoid scratches wihile

trasportation.The roof panels are laid over a frame work

of trusses, columns and purlins fixed using 90mm self

drilling bolt with rubber washer including all types of

flashings. PU Foam must be self-extinguishing, fire

retardant type having minimum density of 40 Kg/Cu.mt.(

+,- 2 Kgs) including 0.25mm craft paper edging,self

tapping screws of required length and nos.etc complete as

per structural design and direction of Engineer-in-charge.

Approved tender make list

125 290.00 ROLLER BLIND : Providing & fixing Roller blinds 2683.07 Two thousand Smt

comprising 100% Polyester with blackout coating, six hundred

weight(±5%) <230 GSM with thickness < 0.55mm, eighty three

width < 230 cms, tearing Strength (Warp) < 3 kgf, rupees and

(Weft) < 9 kgf, Bursting Strength <24 kgf and Colour seven paise only

Fastness to light 5 to 6 Grade. The roller mechanism

operate with Control unit is made of high strength

reinforced plastic. The clutch is of wrap spring design.

High carbon steel springs are provided to transmit

motion from driving to driven members of clutch

mechanism. Clutch is operated directionally by the use

of endless beaded chain. Clutch never needs any

adjustment. The Idler is of high strength reinforced

plastic, consisting of a centre shaft. The idler is mounted

on the bracket by using a plastic lock. The metal sleeve

inside the plastic lock provides bearing surface for the

centre shaft, which rotates freely, providing smooth, quiet

and long wearing operation in a roller tube of 32mm (OD)

(depending upon the size) aluminum extruded grooved

tube made of alloy T6063 weighing 0.27kg/m. Control

unit and Idler are fixed to the either ends of the tube

comprising Roller Head Rail which is an aluminum

extruded rail Power coated in white. Control unit and Idler

are mounted on the Head rail with powder coated M.S.

brackets. The fabric of the blind is fitted to the tube with

heavy duty adhesive tape, plastic insert, powder coated

aluminum extruded rail as per manufacturer's

specifications. The end caps of the tube are ABS. The size

of rail shall be 21mm (OD) made of Alloy HE 9 WP

weighing 0.27kg/m. The Operating chain is made of

4.5mm plastic beads molded on 2.2mm thick polyester

chord. The pitch of the beads is 6mm. The chain drives

the sprockets of the control unit to close and open the

blind. The fabric shall be finished on the sides with edge

tape duly welded for waviness control. The fabric shall be

attached to the roller tube with high quality self adhesive

tape. Average width of blinds shall be 2000mm and fall

of 2700mm with manual operation. Operational action

shall be smooth and upto the satisfaction of the

Engineer in charge. Curtail shall be as per approved

sample and shade of fabric etc complete for all floor all

126 Replacing old & u/s by new Point wiring for Light / Bell

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

703.00 Cat. III 582.77 Five hundred Pt.

Approved tender make list

127 Replacing old & u/s by new Point wiring for FAN with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

176.00 Cat. III 809.01 Eight hundred Pt.

nine rupees and

128 Replacing old & u/s by new Point wiring for Individual

Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

62.00 Cat. III 612.06 Six hundred Pt.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

566.00 Cat. III 894.86 Eight hundred Pt.

eighty six paise

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm

Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

30.00 Cat. III 1046.36 One thousand Pt.

forty six rupees

Approved tender make list

129 Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type

5.00 Cat. III 309.06 Three hundred Pt.

nine rupees and

130 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

85.00 Cat.III 160.59 One hundred Ea.

sixty rupees and

fifty nine paise

(7) Blank Plate Single

20.00 Cat.III 25.25 Twenty five Ea.

(8) Computer RJ-45 socket

267.00 Cat.III 160.59 One hundred Ea.

sixty rupees and

fifty nine paise

131 Removing old & Erecting new Providing and erecting ISI

mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes,

in approved manner as directed

200.00 (a)20 mm 24.24 Twenty four Mtr.

500.00 (b) 25 mm 33.33 Thirty three Mtr.

132 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

50.00 (1) 20 mm 17.17 Seventeen Mtr.

seventeen paise

100.00 (2) 25 mm 21.21 Twenty one Mtr.

Approved tender make list

133 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof confirming BS

with necessary end caps Internal and external bend, flat

bends, coupler, tee etc..All necessary accessories and

measuring of following sizes

25.00 (1) 75 mm x 50 mm trunking 277.75 Two hundred Mtr.

25.00 (2) 100 mm x 50 mm trunking 428.24 Four hundred Mtr.

134 Supplying under floor pregalvanised corrosion proof

rectangular sheet steel cable trunking of 1.6 mm thick

having with stand point load up to 1.33 Ton & free from

seepage of concrete of screed water with all

accessories,Junction Box,Joints as required and

demanded by engineer-incharge and laying/erecting as

per OEM guidelines and as per instruction of engineer

incharge having following size of dimensions and No of

compartments (W x D x T) Cat-III

235.00 [9] 100mm x 38mm x 1.6 mm with One Compartments 548.43 Five hundred Mtr

rupees and forty

three paise only

258.00 [10] 150mm x 38mm x 1.6mm with Three Compartments 765.58 Seven hundred Mtr

sixty five rupees

and fifty eight

155.00 [13] 300mm x 38mm x 1.6 mm with Three Compartments 1342.29 One thousand Mtr

forty two rupees

and twenty nine

135 Replacing old & u/s by new Providing and erecting Mains

with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

2085.00 (b) 2 wire 2.5 sq. mm 104.03 One hundred Mtr.

four rupees and

three paise only

136 providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

Approved tender make list

250.00 (a) 2 wire 4 sq. mm 140.39 One hundred Mtr.

forty rupees and

thirty nine paise

137 providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

20.00 (c) One wire 2.50 sq. mm 34.34 Thirty four Mtr.

thirty four paise

10.00 (d) One wire 4.00 sq. mm 47.47 Forty seven Mtr.

rupees and forty

seven paise only

10.00 (e) One wire 6.00 sq. mm 70.70 Seventy rupees Mtr.

5.00 (f) One wire 10.00 sq. mm 115.14 One hundred Mtr.

5.00 (g) One wire 16.00 sq. mm 177.76 One hundred Mtr.

2.00 (j) One wire 50.00 sq. mm 588.83 Five hundred Mtr.

138 Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs. With

necessary connections.

[A] Conductor Size 0.5 mm

2975.00 (2) Two Pairs 20.20 Twenty rupees Mtr.

(b) Armoured [Jelly Filled]

20.00 (2) Twenty Pairs 199.98 One hundred Mtr.

20.00 (3) Fifty Pairs 467.63 Four hundred Mtr.

rupees and sixty

three paise only

Approved tender make list

139 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction

9345.00 [C] CAT - 6 47.47 Forty seven Mtr

rupees and forty

seven paise only

140 Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard approved

with krone strips

2.00 (b) Suitable for 20 pair 1368.55 One thousand Ea.

rupees and fifty

five paise only

1.00 (c) Suitable for 50 pair 1747.30 One thousand Ea.

thirty paise only

141 1000.00 Providing & Erecting 3mm thick acrylic Sheet with 3.03 Three rupees Sq.

grooving as directed and three paise Inch.

142 15.00 Decorative call bell Ting-tong box type 250 volts 71.71 Seventy one Ea.

complete erected rupees and

143 Replacing old & u/s by new LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20

563.00 (iii) 18 W LED Recessed Light (Cat-lll) 589.84 Five hundred Ea.

(I) Adjustable spot light with COB led having aluminium

reflector of following wattage

15.00 (i) 8 Watts (Cat-III) 859.51 Eight hundred Ea.

fifty nine rupees

Approved tender make list

144 93.00 Providing and erecting decorative wall bracket fittings 1712.96 One thousand Ea.

complete with LED lamp and rust free fittings seven hundred

components mounted in chrome finish housing with twelve rupees

holder ,clear/opaque glass diffuser complete erected with and ninety six

lead wires with minimum 15 wattage capacity as per paise only

instruction engineer incharge/architect/authority .cat-III

145 22.00 Providing, supplying, installing, testing and 1212.32 One thousand Ea.

commissioning of ( Cove Glow LED Cove Strip Light or two hundred

approved equivalent , 25W per 5-meter roll, complete twelve rupees

with extruded aluminium profile (section) for heat and thirty two

dissipation and opal diffuser cover for uniform, glare-free paise only

illumination. The fitting shall be suitable for

surface/recessed/suspended installation as per design. The

strip shall operate on 12V DC supply through an external

electronic LED driver and shall have a minimum CRI of

80, delivering uniform illumination without visible dark

spots. The item shall include all necessary accessories

such as aluminium profile, LED driver, connectors,

mounting clips, adhesive backing, interconnecting leads,

fixing hardware, wiring from driver to strip. Supply,

Testing, commissioning and making good of all works,

complete in all respects as per approved drawings and

directions of the Engineer-in-Charge.

146 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection.

(iii) Above 60 to 89 watts

15.00 Cat-lll 5080.30 Five thousand Ea.

and thirty paise

147 Supplying & erecting following spare parts for panel

mounting Switch Disconnector Fuse Units

148 Operational Handle Assembly Complete for

fifty four rupees

and forty seven

149 Operating Shaft (Extensible) for

fifty five rupees

Approved tender make list

150 Cable Terminal ( ‘Z" Type) Set of Two for

1.00 (ii) 320 / 400 Amps 668.62 Six hundred Ea.

rupees and sixty

151 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

12.00 ICS=100% of ICU only Cat III 6790.23 Six thousand Ea.

and twenty three

152 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S.housing

2.00 ICS=100% of ICU only Cat III 17843.67 Seventeen Ea.

three rupees and

153 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 50 KA and above at 415 V having Normal current

rating 400A. with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

1.00 ICS=100% of ICU only Cat III 27751.77 Twenty seven Ea.

154 Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

erected in existing M.S.housing..

1.00 (3) 250 A -400 A , CT Ratio 1/400 5956.98 Five thousand Ea.

fifty six rupees

and ninety eight

155 Providing and erecting following additional parts for

panel mounting MCCBs

Approved tender make list

1.00 (B)Extended operating rotary handle with pad lock with 1442.28 One thousand Ea.

three position trip,off,on suitable for 400A to 630 A panel four hundred

mounting cat-III forty two rupees

and twenty eight

156 Supply of Approved make Iron Clad or metal clad four

pole change over switch 415V. confirming to IS of

following capacity

1.00 Cat-lll 26106.48 Twenty six Ea.

rupees and forty

eight paise only

157 Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket

to each bar, erected in existing cubical panel with

necessary connections.

2.00 (E) Suitable for 630 Amp. capacity 10559.55 Ten thousand Rn.M

five hundred tr

fifty nine rupees

158 providing and erecting Miniature circuit breaker single

pole 0.5A to 2A system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

15.00 Cat.III 297.95 Two hundred Ea.

ninety five paise

159 Replacing old & u/s by new Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI

174.00 Cat.III 123.22 One hundred Ea.

160 Replacing old & u/s by new 240 V MCB double pole

switch for motor & inductive load (C Curve) having

KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity

(A) 6 to 32 Amp. (Cat-III)

3.00 Cat.III 329.26 Three hundred Ea.

twenty six paise

Approved tender make list

161 Replacing old & u/s by new 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box

having following capacity

(c)63 Amp. (Cat-III)

13.00 Cat.III 811.03 Eight hundred Ea.

and three paise

162 Replacing old & u/s by new 415 V MCB three Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box

having following capacity

1.00 Cat.III 713.06 Seven hundred Ea.

thirteen rupees

163 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(b) sheet steel double door (IP-43)

1.00 (iv)12 way 1492.78 One thousand Ea.

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

1.00 (ii)6 way 2913.85 Two thousand Ea.

thirteen rupees

and eighty five

9.00 (iii)8 way 3412.79 Three thousand Ea.

nine paise only

164 Supplying & erecting Sheet Steel powder coated Cable

end termination Box to be mounted on Top or Bottom of

the MCB Distribution Box for housing/covering Extra

wires & Cables, suitable for following size of MCB DB

1.00 (D) Single Phase 12 Way 389.86 Three hundred Ea.

eighty six paise

Approved tender make list

1.00 (F) Three Phase 6 Way 582.77 Five hundred Ea.

9.00 (G) Three Phase 8 Way 689.83 Six hundred Ea.

The Above all items of MCB, DB the cost of erection on

New angle iron frame add following.

11.00 [B] above single phase 8 way and all three phase DBs. 248.46 Two hundred Ea.

rupees and forty

165 Replacing old & u/s by new Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component.

for following Max. rating erected as directed

(ii) 40Amps. DP

30.00 Cat. III 2458.34 Two thousand Ea.

thirty four paise

166 Replacing old & u/s by new Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component for following Max. rating erected as directed.

(iii) 63 Amps. FP

1.00 Cat. III 3344.11 Three thousand Ea.

167 11.00 Providing & erecting Medium Voltage Danger Notice 26.26 Twenty six Ea

Board sticker as per language suggested by engineer rupees and

incharge of standard size as per IS-2551 twenty six paise

168 50.00 Providing and erecting required size HOT deep 77.77 Seventy seven Kg.

Galvanised iron strip for earthing of H.T. , OCB/ ACB/ rupees and

Transformer LT panel board, Motors etc. using proper seventy seven

clamp. paise only

Approved tender make list

169 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

2.00 (a) For Electrical Installation up to 440V in normal soil 4591.46 Four thousand Ea.

Length of pipe - 1 MtrBack filling compound - 1 Nos Bag five hundred

of 15 Kg. ninety one

rupees and forty

2.00 (c) For Electrical Installation covering Transformer 8636.51 Eight thousand Ea.

Neutrals, Lightning arrester Earthing, A.C.Plant & six hundred

Sensitive Computer System(like Automation, SCADA) thirty six rupees

i.e independent Earthing in normal soil. and fifty one

Length of Pipe : 3.00 mtrs paise only

Back filling Compound :2 nos Bags of 25 Kg.

170 2.00 Providing one bag of 25 Kg. Additional Back Filling 707.00 Seven hundred Ea.

Compound (BFC) suitable for safe earthing device. seven rupees

171 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder

Approved tender make list

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following

approved manufacturers with following size.

(A) locally fabricated panel board

4.00 (i) with 350 mm depth 10468.65 Ten thousand Sq.M

four hundred tr

rupees and sixty

five paise only

172 100.00 Providing , erecting , fabricating the M.S. structure as per 77.77 Seventy seven Kg.

requirement on site incorporating proper size of M.S. rupees and

angles,square,round, flats, bars, channels, sections seventy seven

complete with cutting, welding, grinding & finishing duly paise only

painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

173 1.00 Providing and erecting multifunctional meter suitable for 14123.84 Fourteen Ea.

application of Power monitoring and showing thousand one

measurement of following Voltage, Frequency, Apparent hundred twenty

energy, Apparent power, Active and reactive energy, three rupees and

Active and reactive power, Average voltage Vavg, Peak eighty four

demand power PM, QM, SM, Demand power P, Q, S, paise only

Apparent power S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four quadrant),

Calculated neutral current, Active, reactive, apparent

energy (signed, four quadrant), Active power P, P1, P2,

P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents,

Average current Iag, Peak demand currents, Reactive

power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us]

rated supply voltage 40...300 V AC 45...65 Hz, 40...300

V DC, Network frequency 50 Hz, Type of network 3P,

Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters,

Display digits 12 digit(s) - 14.2 mm in height

174 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

50.00 (C) 3 core 6 Sq. mm 128.27 One hundred Mtr.

175 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

100.00 (I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) 1401.88 One thousand Mtr.

176 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

Approved tender make list

50.00 (C) 4 core 10 Sq. mm 168.67 One hundred Mtr.

rupees and sixty

seven paise only

177 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

50.00 (A) 4 core 16 Sq. mm 184.83 One hundred Mtr.

178 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.

95.00 (A) 4 core 10 Sq. mm 846.38 Eight hundred Mtr.

forty six rupees

and thirty eight

179 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

14.00 (C) 2 to 4 core 10 Sq. mm 38.38 Thirty eight Ea.

12.00 (D) 2 to 4 core 16 Sq. mm 47.47 Forty seven Ea.

rupees and forty

seven paise only

180 Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

2.00 (H) 3 & 1/2 core 240 Sq. mm 247.45 Two hundred Ea.

rupees and forty

five paise only

181 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner.

24.00 (B) 10 Sq.mm 13.13 Thirteen rupees Ea.

48.00 (C) 16/25 Sq.mm. 15.15 Fifteen rupees Ea.

and fifteen paise

8.00 (J) 240 Sq.mm. 85.85 Eighty five Ea.

eighty five paise

Approved tender make list

182 Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

16.00 (B) 10 Sq.mm 10.10 Ten rupees and Ea.

183 Providing and fixing approved make Perforated C type

cable tray. Made from pre- galvanized sheet steel. The

cable tray should be bended as per IS 2062/1079 . with

max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge..

180.00 (3) 150 X 50 X 1.5 mm Thick 322.19 Three hundred Rmt

180.00 (5) 300 X 50 X 1.5 mm Thick 471.67 Four hundred Rmt

rupees and sixty

seven paise only

184 Providing and fixing approved make 'T' Junction for

Perforated C type cable tray. Made from pre galvanized

sheet steel. The Junction should be bended as per IS

2062/1079. with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

10.00 (3) 150 X 50 X 1.6 mm Thick ' T' Junction 167.66 One hundred Ea.

rupees and sixty

10.00 (5) 300 X 50 X 2.0 mm Thick ' T' Junction 249.47 Two hundred Ea.

rupees and forty

seven paise only

185 Providing and fixing approved make '90° Elbow' for

Perforated C type cable tray. Made from pre galvanized

sheet steel. The Junction should be bended as per IS

2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge..

10.00 (3) 150 X 50 X 1.6 mm Thick 90° Elbow 146.45 One hundred Ea.

forty six rupees

10.00 (5) 300 X 50 X 2.0 mm Thick 90° Elbow 219.17 Two hundred Ea.

nineteen rupees

Approved tender make list

186 Providing and fixing approved make 'Cross over Junction'

for Perforated C type cable tray. Made from pre

galvanized sheet steel. The Junction should be bended as

per IS 2062/1079 with max 17.5% perforation and shall

be coated with hot dip galvanizing as per IS 2629/4759.

with coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

10.00 (3) 150 X 50 X 1.6 mm Thick Cross Junction 210.08 Two hundred Ea.

eight paise only

10.00 (5) 300 X 50 X 2.0 mm Thick Cross Junction 309.06 Three hundred Ea.

nine rupees and

187 176.00 Replacing old & u/s by New Providing & erecting 1948.29 One thousand Ea.

Approved make Power Saving 50 Watt Ceiling Fan with nine hundred

double ball bearing ISI mark with Condenser 230 volt forty eight

A.C. 50 Hz 1200 mm sweep complete having 3blades rupees and

with aluminium blades with , canopy & 30 cm. down rod twenty nine

erected with earthing.(Make shall be approved by paise only

Engineer in charge))

188 Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.

7.00 250mm with 1350 RPM Cat.II 1703.87 One thousand Ea.

three rupees and

Digital EPABX system

189 SITC of Digital / PCM / TDM EPABX System having

SMT design, system with flexible universal slots. Inbuilt

Auto attendant facility, Minimum 15 Nos. conference,

Analog extension line, Calling GSM, E&M line, PRI / EI

& VOIP program me through Analog telephone digital

key from Ethernet, public address cord, shall have

unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking,

Class of Service, Quick Dial-Single Digit dialing of any

two external number, Once only ring device, Chairman /

Secretary - Do not disturb Facility, Power Down Mode,

Hot Line, Hot Outward Dialing, Day Night Mode, Auto

Call Back, Barge-in, Call Pick Up & Call Transfer, Call

transfer while Ringing with Voice Guide System, (DISA),

Caller ID (CLI), CLI Base ECF, CLI Base routing Internet

Ready Port, External Music Port, Call Budgeting, Call

Most Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory

Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of Executive

1.00 [E] No of Extension 128, No of Junctions 24, No of 174606.7 One lakh Ea.

expandable ports : 512, Operators Console - 01 8 seventy four

Compatible : ISDN and Networking thousand six

Approved tender make list

190 80.00 Providing and erecting Standard Push button telephone 311.08 Three hundred Ea.

(DTMF) Phones [[Approved by Competent Authority i.e. eleven rupees

not Below the rank of Executive Engineer ] and eight paise

191 5.00 Providing and erecting Digital key phone (12-16 direct 3955.16 Three thousand Ea.

key) [[Approved by Competent Authority i.e. not Below nine hundred

the rank of Executive Engineer ] fifty five rupees

192 50.00 SITC of PATCH CORD LC-LC SM DUPLEX 1901.83 One thousand Ea.

LENGTH- 3m [Approved by Competent Authority i.e. nine hundred

not Below the rank of Executive Engineer ] one rupees and

193 1.00 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port- 4400.57 Four thousand Ea.

Fully Loaded [Approved by Competent Authority i.e. not four hundred

Below the rank of Executive Engineer ] rupees and fifty

seven paise only

194 267.00 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 156.55 One hundred Ea.

30U' Snag less [Approved by Competent Authority i.e. fifty six rupees

not Below the rank of Executive Engineer ] and fifty five

195 20.00 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 200.99 Two hundred Ea.

30U' Snag less [Approved by Competent Authority i.e. rupees and

not Below the rank of Executive Engineer ] ninety nine

196 1.00 SITC of 24 x 10/100/1000BASE-T PoE ports 31996.80 Thirty one Ea.

4 x Gigabit RJ45/SFP Combo ports thousand nine

Advanced L2 switching and security features hundred ninety

L2+ Static Routing six rupees and

Optional “standard mode” or “surveillance mode” eighty paise

management user interface only

193 W PoE budget [Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

197 Replacing old & u/s by New Providing and erecting

Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor

with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for (

cost includes Eco Friendly green gas charging and 15A

plug top & Remote Control & MS Stand) with necessary

core cutting. (Old 33 New 25) (1) For ISEER Range

(KWH/KWH)(3.1 to 3.99)

25.00 (B) for 1.5 ton capacity 45898.44 Forty five Ea.

eight rupees and

forty four paise

Approved tender make list

198 Providing and erecting Inverter based approved make

Cassette type split air-conditioning unit consisting of

condensing unit with fan motor, hermetically sealed

scroll/rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower

motor with its accessories by Eco friendly Green gas

charging & Internal copper wiring & Remote control (

star and above of current year) with necessary core

5.00 (C) for 3 ton capacity- 1/3Phase 145049.1 One lakh forty Ea.

3 five thousand

199 240.00 Replacing old & u/s by new insulated pair of soft copper 1158.47 One thousand Mtr.

tubing open or concealed including power and control one hundred

cable,necessary PVC drain pipes for Split AC machine fifty eight

up to 4 TR capacity rupees and forty

seven paise only

200 5.00 Supplying and installing MS angle , powder coated / 1361.48 One thousand 0.00

Painted standard type of wall/floor stand mount for three hundred

outdoor unit of split AC of following capacity, erected sixty one rupees

with necessary hardware materials as directed. and forty eight

201 Supplying and erecting approved make online Un-

interruptible Power Supply system comprising flat cum-

boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger

having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load

power factor with battery, over/under voltage output with

over load & short circuit protection equipment. The

system housed in CRC sheet duly powder coated paint

with following power backup.with MS painted batteries

stand, 10% Overload capacity for momentary load.

1.00 (D) 5 KVA with 1Hr Backup 130103.1 One lakh thirty Ea.

202 1.00 Supplying and erecting approved make panel mounting 1275.63 One thousand Ea.

type Digital Voltmeter having 3 digits LED display, 0 to two hundred

750 AC Volts range erected on existing panel board with seventy five

all connection, wiring etc .with manufacturers calibration rupees and sixty

certificate. three paise only

203 1.00 Supplying and erecting approved make panel mounting 1558.43 One thousand Ea.

type Digital Ammeter having 3 digits LED display, five hundred

external CT operated, calibrated for 0 to 1000 Amps fifty eight

suitable to operate on 500 Volt AC , erected on existing rupees and forty

panel board with all connection, wiring etc .with three paise only

manufacturers calibration certificate.

204 1.00 Supplying and erecting approved make Analog type 1584.69 One thousand Ea.

moving iron C.T operated Ammeter A C Current suitable five hundred

slide in scale 0- 400 Amp. with 3 Nos. of Current eighty four

Transformer erected on panel board with connections. rupees and sixty

nine paise only

Approved tender make list

205 2.00 Supplying and erecting Ammeter / Voltmeter selector 317.14 Three hundred Ea.

switch for 3 phase AC Supply 500 V on existing panel seventeen

board with necessary connections. rupees and

206 1.00 Providing & erecting L.T. Current Transformer with bar 274.72 Two hundred Ea.

primary 50/5 to 1000/5 ratio 15 VA burden erected in seventy four

existing CRCA box duly secured with insulating rupees and

materials connected to the meter seventy two

207 3.00 Supplying and erecting approved make suitable panel 43.43 Forty three Ea.

indicator LED type lamp, lens cover, complete erected rupees and forty

with necessary connections. three paise only

208 1.00 Supplying & erecting directly operated single phasing 1078.68 One thousand Ea.

preventer complete erected and connected to supply up to seventy eight

45 Amp. Range. rupees and sixty

eight paise only

209 Supplying & erecting approved make motor control

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y

- B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons,

to be erected on angle iron frame grouted on wall as

directed. The isolator, overload relay & contactors will be

of L & T, Siemens or BCH make only.

1.00 (A) DOL up to 5.0 H.P. 7722.46 Seven thousand Ea.

rupees and forty

210 S.I.T.C. submersible pump set suitable for bore of

mm. dia. or more having three phase motor capacity not

more than 5 H.P. with following capacity . Lifting and

Lowering taken extra.

(A) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs.

head respectively suitable for 50mm dia. delivery pipe

1.00 Cat.III 36663.00 Thirty six Ea.

211 Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size.

30.00 (C) 3 Core x 4 Sq. mm 146.45 One hundred Mtr.

forty six rupees

212 Providing Water proof straight Joint in PVC insulated flat

flexible copper cable by using insulating material, water

proofing material, & making the joint complete.

Approved tender make list

1.00 (A) Up to 10Sq. mm 189.88 One hundred Ea.

(A) GENERAL DESCRIPTION OF LIFTS.

213 [1] GEAR LESS LIFT DRIVE (MRL) comprising of

High Starting torque Lift 3 phase 440 V A. C. Permanent

Magnet Synchronous motor of proper rating with high

efficiency shall be used.[2] Micro processor based / PLC,

ACVVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door

operation which shall be full collective selective

operation hall call demand response, UP/DOWN hall

stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size

and to sustain the impact load cabin + passenger with

safety factor of fire for steel and side panels of Stainless

steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of s/s 304 chaker plate design

sugeested of engineer in charge. of engineer in charge.

Car doors shall be of stainless steel grade 304, hairline

finish with centre opening / telescopic automatic doors.

Car panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of

auto/ attended mode. All car panel buttons and all floor

switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be

fully automatic centre opening/ telescopic opening made

of hairline finish steel grade of 304 with key holes and

infrared curtains with Unlocking facility from outside [5]

Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also,

Emergency Light & Fan should start immediately without

any Time Delay as soon as power fails.[6] Digital

scrolling indicator system for up-down arrow along with

floor position indicator shall be provided inside the car

and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8]

Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility). [9] Audio visual

indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is

Approved tender make list

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic

sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission

of calibration certificate submission, door key holes in the

floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided

without any extra cost, where ever required as / if directed

by engineer in charge.

[17] Permanent wiring with necessary safety devices like

RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine

room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall

be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency.

[18] Any civil/ electrical works for additional and

alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without any

extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in

[20A] As per statutory requirement of Govt. Of Gujarat

lift & escalator act 2000, lift agency has to provide 1. Car

top safety barricade2. Push & talk communication

system.3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide

third party insurance upto completion of free maintenance

period and submit the document for the same.

Approved tender make list

[21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating

voltage controlled Stabilizer suitable for your controller,

drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required

for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector)

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the

passenger / stretcher lift having following main features:

8 / 10 Passengers, Ground plus 2 upper floor with Rated

Speed of 1.0 m/sec.,

1.00 (C) With General PLUS ADDITIONAL SPECIAL 1474779. Fourteen lakh Ea.

FEATURES attached herewith. Prem. Cat. 78 seventy four

hundred seventy

nine rupees and

214 1.00 SITC of Digital Conference Control unit /Server. Should 257752.0 Two lakh fifty Ea

have minimum 3 x Conference Network Ports (RJ45) or 0 seven thousand

better, 1 x LAN Port, 1 x Balanced XLR audio input, 1 x seven hundred

Balanced XLR audio output or more, Should have internal fifty two rupees

/ External Conference recording capablity, Camera only

Control integration capability. Controller Must have

Dante / AES67 interface. Power supply should be from

same OEM.Server Should be able to drive

chairman/delegate units mentioned in the tender with the

help Extension unit and power supply unit. Intel® Core™

i7-12700 Processor (2.1 GHz, up to 4.9 GHz w/Boost,

MB cache, 12 core, 65W), 16 GB (2 x 8 GB) DDR5-4800

SODIMM Memory, 256 GB PCIe 4x4 2280 Value M.2

SSD, 2x 1 Gbps Ethernet adapters..Certification: CE.

215 1.00 Supply, Installation, testing and commissioning of 62842.20 Sixty two Ea

Moduler / Singal plate Flush Mount Chairman Discussion thousand eight

Unit with removable Gooseneck microphone. hundred forty

Microphone lenght: 360mm or better. Microphone must two rupees and

have led indicator. Microphone Should have USB-C port twenty paise

Connection /Mini USB/ Screw lock 5-Pin/ Din-Pin only

conncetor. Chairman Discussion Should have built-in

Digital Signal Processing. Unit should provide Priority to

speak to chairman .Priority button silences all delegate

microphones and allows only the chairperson to speak.

Audio quality : 16 bit digital or better.Connectivity:

Concealed conference bus connections, 2 x RJ 45 ethernet

port (IN/OUT - interchangeable), Loop through, daisy-

chain cabling (non-proprietary).Compatible screw lock

microphone connectivity. Certification: CE; BIS.

Approved tender make list

216 20.00 Supply, Installation, testing and commissioning of 60953.50 Sixty thousand Ea

Moduler / Singal plate digital Flush Mount Delegate nine hundred

Discussion Unit with removable gooseneck microphone. fifty three

Microphone lenght: 360mm or better. Microphone must rupees and fifty

have led indicator. Microphone Should have USB-C port paise only

Connection /Mini USB/ Screw lock 5-Pin/ Din-Pin

conncetor. Delegate Discussion should have built-in

Digital Signal Processing. Unit with Microphone On / Off

Button.Audio quality:16 bit digital or better.Connectivity:

Concealed conference bus connections, 2 x RJ 45 ethernet

port (IN/OUT - interchangeable), Loop through, daisy-

chain cabling (non-proprietary). Certification: CE; BIS.

217 1.00 Supply and laying of conference cable, supplied by the 51055.50 Fifty one 0.00

same OEM of conference system. thousand fifty

five rupees and

fifty paise only

218 8.00 Supply , installation , testing and commissioning of 5.25", 19038.50 Nineteen Ea

high power, high sensitivity, 2-way loudspeaker. RMS thousand thirty

Power: 80W. The speaker cabinet must have frequency eight rupees and

range (-3dB) of 80 Hz - 20 kHz, sensitivity (1W/1m) fifty paise only

89dB or more, delivering Max SPL of 112 dB or more

with power Cont handling 100W or more. The speaker

should have a the following wattage taps: 100V - 30 W,

15 W, 8 Ω bypass.The speaker cabinet should have a

horizontal x vertical coverage angle of 130 x 100 degree.

219 2.00 Supply , Installation, Testing & Commissioning of 4 98475.00 Ninety eight Ea

Channel 400W Class D amplifier.Amplifier Should have thousand four

line input balanced: 4, output channels: 4. channel hundred seventy

separation > 65 dB. frequency response 20Hz - 22KHz. five rupees only

220 1.00 Supply, Installation, testing & commissioning of SITC of 216645.0 Two lakh Ea

4K 86" Android 14 Display, Display Resolution should 0 sixteen thousand

be 3840 x 2160 (UHD-4K) & Brightness should be 550 six hundred

nits or higher. Contrast ratio 15000:1 or better. Display forty five rupees

should have 1mm ultra-thin bezel, and should support only

High Dynamic Range. Display shoud have input ports:

HDMI In 2.0 x 1 (ARC), HDMI in 2.0 x 2, USB-A 2.0 x

1,USB-A 3.0 x 1,LAN In (RJ45) x 1,AV In x 1 & output

port: S/PDIF Out x 1, Audio Output (Jack 3.5 mm) x

Display should have 4GM RAM & Storage: 16GB.

Display should support Wi-Fi/ Bluetooth. Display should

have refresh rate: 120Hz or better. Display should support

24x7 Operation.Display should support wireless casting..

221 1.00 Supply, Installation, testing & commissioning of SITC of 46106.50 Forty six Ea

4K 55" Android 14 Display, Display Resolution should thousand one

be 3840 x 2160 (UHD-4K) & Brightness should be 450 hundred six

nits or higher. Contrast ratio 15000:1 or better. Display rupees and fifty

should have 1mm ultra-thin bezel, and should support paise only

High Dynamic Range. Display shoud have input ports:

HDMI In 2.0 x 1 (ARC), HDMI in 2.0 x 2, USB-A 2.0 x

1,USB-A 3.0 x 1,LAN In (RJ45) x 1,AV In x 1 & Output

port: S/PDIF Out x 1, Audio Output (Jack 3.5 mm) x

Display should have 4GM RAM & Storage: 16GB.

Display should support Wi-Fi/ Bluetooth. Display should

have refresh rate: 120Hz or better. Display should support

24x7 Operation.Display should support wireless casting.

Approved tender make list

222 1.00 SITC of 5x2 Seamless Switcher/Scaler/Extender With 305525.0 Three lakh five Ea

USB-C, HDMI Inputs & Dante. It can extend 0 thousand five

uncompressed signals up to a distance of 230ft/70m. The hundred twenty

output supports single full screen or various multiview five rupees only

display modes (Single / PIP / PBP / Triple / Quad).

Support video resolutions up to 4K@60Hz 4:4:4 &

18Gbps video bandwidth. Transmitter - Inputs: 2x USB-

C (60W Charging), 3x HDMI, 1x Analog audio, 1x Dante

2ch. Outputs: 1x HDMI and 1x HDBT (PoE) mirrored, 1x

Analog audio, 1x Dante 2ch. Controls: R remote, RS-232,

TCP/IP or Web GUI. CEC/RS-232 control external

devices ON/OFF. Receiver - Inputs: 1 x HDMI IN, 1x

USB Host, 1 x HDBaseT IN. Outputs: 1 x HDMI OUT,1

x LINE OUT. Control: 1 x RS-232, 1 x USB host, 2 x

USB devices, 1 x SERVICE, 1 x IR IN , 1 x IR OUT.

223 1.00 SITC of Fixed I/O DSP with 4 balanced mic inputs, 2 99990.00 Ninety nine Ea

balanced Mic/Line inputs and 1 stereo unbalanced input; thousand nine

1 stereo and 2 mono outputs; 2-channel USB audio hundred ninety

interface for soft codec (Skype, WebEx) integration or rupees only

playback from computer; Full digital processing on inputs

and outputs; 8 x 3 audio routing matrix; 6-channel Smart

Mix (gate or gain sharing); Onboard acoustic echo

canceler (AEC) processing; Front panel direct operation

and Web Remote functionality; IP control for third-party

CCS administration; Up to 6 mixers can be linked using

224 1.00 Supply, Instaliation, Testing and Commissioning of 20X 166650.0 One lakh sixty Ea

optical zoom Auto tracking PTZ Camera with all required 0 six thousand six

accessories, complete. Professional camera for video hundred fifty

collaboration and live streaming. 20x zoom lens that rupees only

captures every detail. Compatible with all hardware and

cloud based video collaboration applications. Interface :-

HDMI, USB, 3G-SDI and IP interface.

225 2.00 SITC of USB C-C Cable 3.0 with a length of 3 meters, 8332.50 Eight thousand Ea

supporting high-speed data transfer rates of up to 5 Gbps. three hundred

Approved thirty two

rupees and fifty

226 4.00 SITC of USB (As per site requirement) Cable with a 9443.50 Nine thousand Ea

length of 5 meters, supporting high-speed data transfer four hundred

rates of up to 5 Gbps. Approved forty three

rupees and fifty

227 6.00 SITC of HDMI Cable with 1 meters length, High-Speed 3110.80 Three thousand Ea

HDMI Cable with Ethernet, supporting resolutions up to one hundred ten

4K @ 60Hz, HDR (High Dynamic Range), with a rupees and

bandwidth of 18 Gbps, 3D, Deep Color, and HDCP 2.2 eighty paise

228 2.00 SITC of HDMI Cable with 5 meters length, High-Speed 828.20 Eight hundred Ea

HDMI Cable with Ethernet, supporting resolutions up to twenty eight

4K @ 60Hz, HDR (High Dynamic Range), with a rupees and

bandwidth of 18 Gbps. Features, 3D, Deep Color, and twenty paise

HDCP 2.2 support. only

229 2.00 SITC of HDMI Cable with 10 meters length, High-Speed 1323.10 One thousand Ea

HDMI Cable with Ethernet, supporting resolutions up to three hundred

4K @ 60Hz, HDR (High Dynamic Range), with a twenty three

bandwidth of 18 Gbps, 3D, Deep Color, and HDCP 2.2 rupees and ten

support paise only

Approved tender make list

230 4.00 Pop-Uo Box with 1xHDMI, 1x USB A, 1x USB C, 14443.00 Fourteen Ea

2xPower Point connectivity. thousand four

231 100.00 High-performance Category 6 UTP (Unshielded Twisted 72.22 Seventy two Ea

Pair) cable, suitable for Gigabit Ethernet applications. rupees and

232 100.00 1.5sq mm speaker cable. 72.22 Seventy two Ea

233 1.00 Various connectors as per site requirement. 16665.00 Sixteen Ea

five rupees only

Five crore thirty two lakh eighty eight thousand eight hundred ninety five rupees and sixty four paise only

I/We am / are willing to carry out the work

(Should be written in figures and words) of the estimated rate mentioned above. Amount of my / our tender works

**Estimated amount: 5,32,88,895.64/- **Estimated amount: 5,32,88,895.64/-

Put to Tender Rs. Put to Tender Rs.

Deduct……% below Rs. Add……% above Rs.

Net Rs. Total Rs.

In words …………………………….……… In words:

Two crore twenty five lakh eight thousand five hundred twenty nine rupees and thirty two paisa only.

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other specifications of

Division or as directed.

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

Notes 3 - Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

Notes 4 - The contractor shall be exhibit board as for government circular no.

BDG/3277/1657 N dated-26/01/1997 S (M.GUJ) with detailed specification and details of work and amount

involved at site without any payment as directed by engineer in charge.

Notes 5 - I/We hereby declared that, I/We have visited the site and fully acquainted myself yourselves with the local

situation regarding materials and other factors pertaining to the work piece for submitting this tender.

Notes 6 - I/We hereby declare that, I/we have carefully studied condition of contract specification and other then

tender documents of this work and agree to execute that same accordingly.

Notes 7 - The price bid shall be including all taxes, duties, levies, fees and other charges as per applicable taxes

including label cess & excluding GST

Notes 8 - The Credit of dismantled material shall be recovered from R.A. Bills

Approved tender make list

Notes 9 - Rate of each item of dismantled material must be as shown in credit item table. Minimum amount of credit

item must be as per amount of credit item table. In case quoted tender amount higher than estimated amount then

the credit item value shall be increased as per pro

Notes 10 -The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

Notes 11 -The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Notes 12 - GST and Income tax TDS will be deducted at a source while making payments of bills

Notes 13 - In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

DEPUTY EXECUTIVE ENGINEER EXECUTIVE ENGINEER

C.P.ELECTRICAL SUB DIV-23 CP ELECTRICAL DIVISION

GANDHINAGAR GANDHINAGAR

Deputy Executive Engineer Executive Engineer

C P Sub Division No.-07 Capital Project Division No.2,

Gandhinagar Gandhinagar

Approved tender make list

BILLING OF QUANTITIES PART:

Credit of Dismantled Material

Ite Quantitie Items of works Estimated rates UNIT TOTAL

m s In In words Unit AMOUNT

No Estimate Figure ACCORDIN

may be ESTIMATE

1 65.00 Brick bat@ 70% of quantity 247.45 Two hundred Cmt

forty five paise

2 190.00 floor tiles @ 50% of quantity 42.18 Forty two smt

3 62.00 Wooden door frame 432.05 Four hundred No

rupees and five

4 62.00 Wooden shutter of door with fitting 446.82 Four hundred No

(flush) without frame forty six rupees

5 20.00 ventilation frame 103.42 One hundred No

6 109.00 EZ-7 section franme-windows 323.20 Three hundred No

7 35.00 bib tap/pilar tap 60.60 Sixty rupees No

and sixty paise

8 18.00 WC 182.50 One hundred No

rupees and fifty

9 18.00 Wash basin 182.50 One hundred No

rupees and fifty

Approved tender make list

10 1890.00 Partition & Ceilinng 202.00 Two hundred Smt

11 580.00 Cost of Old & U/S Light /Bell Point 14.40 Fourteen Pt

Modular cu wiring. rupees and

forty paise only

12 198.00 Cost of Old & U/S Fan Point Modular 21.60 Twenty one Pt

cu wiring rupees and

sixty paise only

13 85.00 Cost of Old & U/S Modular Individual 15.80 Fifteen rupees Pt

point 5A. and eighty

14 150.00 Cost of Old & U/S Modular Individual 24.80 Twenty four Pt

16A Point , 2.5sq mm Mains Cu wire rupees and

15 400.00 Cost of Old & U/S Rigid PVC Pipe 25 0.72 Zero rupees Mtr

16 950.00 Cost of Old & U/S 1.5 Sqmm Mains 3.78 Three rupees Mtr

( Cu / Allu) and seventy

17 1800.00 Cost of Old & U/S 2.5 Sqmm Mains 5.13 Five rupees Mtr

( Cu / Allu ) and thirteen

18 138.00 Cost of Old & U/S MCB SP ( 6 to 32 5.00 Five rupees Ea.

19 9.00 Cost of Old & U/S MCB DP ( 32 A ) 13.50 Thirteen rupees Ea.

and fifty paise

20 9.00 Cost of Old & U/S MCB DP ( 40 A ) 14.25 Fourteen Ea.

21 61.00 Cost of Old & U/S RCCB DP ( 25 A ) 112.50 One hundred Ea.

and fifty paise

22 4.00 Cost of Old & U/S RCCB FP ( 63 A ) 174.00 One hundred Ea.

23 11.00 Cost of Old & U/S FP MCB ( 63 A ) 36.00 Thirty six Ea.

24 10.00 Cost of Old & U/S MCBDB Single 27.50 Twenty seven Ea.

Phase 8 way Single Door rupees and fifty

Approved tender make list

25 9.00 Cost of Old & U/S MCBDB Three 68.50 Sixty eight Ea.

Phase 4 way Single Door rupees and fifty

26 6.00 Cost of Old & U/S MCBDB Three 78.00 Seventy eight Ea.

Phase 6 way Single Door rupees only

27 198.00 Cost of Old & U/S Fan 147.60 One hundred Ea.

sixty paise only

28 297.00 Cost of Old & U/S Tube fitting 22.80 Twenty two Ea.

29 283.00 Cost of Old & U/S Recess down light 62.40 Sixty two Ea.

fitting rupees and

forty paise only

30 33.00 Cost of Old & U/S 1.5 ton split AC 2655.0 Two thousand Ea.

31 130.00 Cost of Old & U/S for Items beyond 85.50 Eighty five Mtr

standard length For Single phase Split rupees and fifty

A.C. Machine insulated pair of soft, paise only

DEPUTY EXECUTIVE ENGINEER EXECUTIVE ENGINEER

C.P.ELECTRICAL SUB DIV-23 CP ELECTRICAL DIVISION

GANDHINAGAR GANDHINAGAR

Deputy Executive Engineer Executive Engineer

C P Sub Division No.-07 Capital Project Division No.2,

Gandhinagar Gandhinagar