REPAIRS/ MAINT OF DG SETS AND EOT CRANES INCL REPAIRS TO INCINERATOR AND VARIOUS STP INSTALLATIONS UNDER GE MISAMARI

Amount

M&L for Servicing to DG set of capacity 400 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit installed at UAV :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 320 KVA installed at UH-ALH, Sangrilla Hall :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 250 KVA installed at AF Technical Area, 671 EME:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 200 KVA installed at JK-03 Nos, AF PUMP HOUSE,UAV,GP-II PH & 6679 Maint Flt :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 125 KVA installed at Old PH,Rekhamari PH & 33 KV MRS-I Stn :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 100 KVA installed at 180 MH,Lama camp PH ,Trolly mounted DG, Signal centre DG set :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 82.50 KVA installed at AF Net (02 Nos) ,Shivagi Nagar St light & UAV- (CCR) troop :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 63 KVA at STP :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 62.50 KVA installed at OMC, Engr Regt ( Stn HQ) ,AF Guard Room ,311 ASC & Div Guard Room, 571 ASC Bn, Perimeter lights (TCP-I, Rekhamari,Nepali Basti), Buffle range,MRS-II,667 MI room, signal centre. :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 45 KVA installed at Sewage PH IMPH and signal centre DG set:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 40 KVA installed at 15 Mobile, 4 CZWKSP,STP Pratap Nagar-I and 180 MH oxygen plant DG:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 35 KVAinstalled at UAV Troop (06 Nos) :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 30 KVA installed at Signal centre & 71 DOU:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 25 KVA installed at CCR Sub Stn :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 20 KVA installed at Zonal Wksp :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 15 KVA installed at AF station perimeter security lights:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 7.50 KVA installed at Immoles (02 Nos), Perimeter security lights, Stn HQ (MI Room P nagar) :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set, (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

M&L Battery leads complete with terminal and lugs (set of three Nos) including removal of extg unsv one, compete all as specified and directed.

M&L Battery leads complete with terminal and lugs (set of two Nos) including removal of extg unsv one, compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 400/320 KVA including removal of extg unsv one, compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 250/200 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 125/100 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 82.50 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 63.00/62.50 KVA including removal of extg unsv one,compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 45/40.0 KVA including removal of extg unsv one, compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 35/32.50 KVA including removal of extg unsv one , compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 30.00 KVA including removal of extg unsv one, compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 25/20 KVA including removal of extg unsv one ,compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 15/12.50/7.50 KVA including removal of extg unsv one ,compete all as specified and directed.

M & L for Radiator Fan Blade complete suitable for capacity 7.5 to 82.5 KVA including removal of extg unsv one, compete all as specified and directed.

M & L for Radiator Fan Blade complete suitable for capacity 100 to 400 KVA including removal of extg unsv one , compete all as specified and directed.

M&L for disconnecting all electrical connections from DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and testing & commissioning, complete all as specified & directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 7.50 KVA to 15.00 KVA DG, complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 20 KVA to 40.0 KVA DG, complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 62.5 KVA to 82.5 KVA DG, complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 100 KVA to 125 KVA DG, complete all as specified and directed.

M & L for self starter assembly 24 volts complete suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for self starter assembly 12 volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one complete all as specified and directed.

M & L for DC alternator assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one ,complete all as specified and directed.

M & L for DC alternator assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one ,complete all as specified and directed.

M & L for electronic speed control unit assembly 24 volts suitable for 100 KVA to 400 KVA including removal of extg unsv one, complete all as specified and directed.

M & L for SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger for including removal of extg unsv one, complete all as specified and directed.

M & L for SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of extg unsv one , complete all as specified and directed.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Brass battery teriminals extended type heavy grade including removal of extg unsv one , complete all as specified and directed.

M& L for SS canopy Stainless steel hinges as per original OEM for acoustic doors with suitable Stainless steel bolts and nuts of DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Radiator hose pipe with suitable clamps of DG set including removal of extg unsv one , complete all as specified and directed.

M & L for solenoid switch assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one , complete all as specified and directed.

M & L for solinoid switch assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one , complete all as specified and directed.

M & L for Anti vibration pads with suitable bolts and washers including removal of extg unsv one , complete all as specified and directed.

M & L for Asbestos Rope including removal of extg unsv one , complete all as specified and directed.

M & L for Water pump Assembly suitable for 7.5 KVA to 63 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Water pump Assembly suitable for 82.5 KVA to 125KVA DG set including removal of extg unsv one , complete all as specified and directed.

M & L for Water pump Assembly suitable for 200 KVA to 400 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Feed pump suitable for 7.5 KVA to 63 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Feed pump suitable for 82.5 KVA to 125KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Electronic Type Starting Switch for 7.5 KVA to 15 KVA DG set including removal of extg unsv one , complete all as specified and directed.

M & L for Electronic Type Starting Switch for 30 KVA to 125 KVA DG set including removal of extg unsv one, complete all as specified and directed.

M & L for Servicing to oil fired incenerator of capacity 50 Kg/Hr with and including replacement of the worn out spares and cleaning nozzles of fuel injection, wet scrubber, proplet seperator with kerosene oil, ID fan blower including cleaning of Primary chamber, secondary chamber with replacement of unsv fire bricks if required, overhaling the motors, pumpsets and testing for smooth running complete all as manufacturer’s specifications and as directed installed at 15 Mob, 180 MH , complete all as specified and directed.

S & F Digital temperature indicating controller to read upto temperature 1200 degree centrigate with 2 set points including removal of existing unserviceable one in the control panel installed at 15 mobile vet hospital and 180 MH, complete all as specified and directed.

M&L for primary burner as per existing installed at incenerator complete all as specified. Make : Ecoflame or equivalent

M&L for secondary burner as per existing installed at incenerator complete all as specified and directed. Make : Ecoflame or equivalent

M & L for Ignition transformer 230 V 15 A , 50/60 HZ as per existing installed at incenerator complete all as specified and directed. Make : FIDA TREVISO ITALY or equivalent

M & L for Heat resistant canvas cloth used for the smoke duct as per existing installed at incenerator, complete all as specified and directed.

M&L for taking out unserviceable radiator from existing DG set of capacity 200 KVA to 400 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and directed.

M&L for taking out unserviceable radiator from existing DG set of capacity 62.5 KVA to 125 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.

M&L for taking out unserviceable radiator from existing DG set of capacity 7.5 KVA to 45 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.

S&F battery low maintenance heavy duty lead acid of capacity 12 volts 150 AH suitable for DG sets including removal of extg unsv one, complete all as specified and directed. Make : Exide or equivalent in Luminous/ Amaron.

S& F battery low maintenance heavy duty lead acid of capacity 12 volts 180 AH suitable for DG sets including removal of extg unsv one, complete all as specified and directed. Make : Exide or equivalent in Luminous/Amaron.

S & F battery low maintenance heavy duty lead acid of capacity 12 volts 200 AH suitable for DG sets including removal of extg unsv , complete all as specified and directed. Make: Exide or equivalent in Luminous/ Amaron.

Supply, Fixing and erection of Mild steel canopy Cover for 6679 DG set ( 200 KVA) as per existing size and profile duly painted with two coats of synthetic enamel paint over red oxide primer complete all as specified and directed.

M & L for Low oil pressure switch ( LLOP) as per Existing OEM Suitable for upto 200 KVA DG sets capacity complete all as specified and directed.

M&L for microprossesor based fully configurated as per Existing OEM controller display panel board Suitable for upto 125 KVA DG sets capacity ,complete all as specified and directed.

M&L for onload change over switch of capacity 63 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P, complete all as specified and directed. Make : Model No. IHBFFE0063 of Havells or equivalent in L&T/Indoasian.

M & L for onload change over switch of capacity 100 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P complete all as specified and directed. Make : Model No. IHBFFE00100 of Havells or equivalant in L&T/Indoasian

M & L for onload change over switch of capacity 400 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P, complete all as specified and directed. Make : Havells/L&T/Indoasian.

Scraping old paint of any capacity DG set Chessis (Approx coverage area 5-7 Sqm) installed at various locations and Painting with one coats of red oxide paint and two coat of synthetic enameal paint of shade ,complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strep 32 x 6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earth work GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to panel board as indicated including testing complete, complete all as specified and directed.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 200 KVA to 400 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and directed.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 62.5 KVA to 125 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 7.5 KVA to 45 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.

M & L for fuel pipe ( benjo pipe) having length 1 feet to 3 feet of suitable size as per OEM including removal of extg unsv one, complete all as specified and directed.

M & L for Hause pipe of suitable size and length as per OEM for 62.5 KVA to 400 KVA including removal of extg unsv one, complete all as specified and directed.

M & L for contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 62.5 KVA to 320 KVA including removal of extg unsv one complete all as specified and directed. Make : KOEL/L&T/Havells.

M&L for periodic inspection/ servicing/ overhaulling of 10 Ton capacity flame proof EOT crane of any make installed at different building/location at site, making the cranes in serviceable condition complete all as specified and directed for maintenance specified as under:- (A) LONG TRAVERSE MOTION- (a) Checking gear box oil level, checking and rectification of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any.

ITEM No. 86 Contd........ (B) CROSS TRAVERSE MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any.

ITEM No. 86 Contd........ (C) HOIST MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all HT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any.

ITEM No. 86 Contd........ (D) ELECTRICALS (a) Checking and tightening all electric connection (b) Checking the contactors/ relays etc for overheating or flashing. (c) Cleaning off all connection and control cables. (d) Properly bunching the loose control cable. (e) Checking functioning of cable carriers. (f) Checking the connection and serviceability of VVVF drives for smooth working. (E) GROUND MOTION CONTROL PANEL Opening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete. NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in unit quoted rate. . 2. Complete Greasing of each parts of crane for proper functining to EOT crane shall be included in unit quoted rate. 3. Gear box oil shall be measured and paid separately.

All as per item No. 86 here-in-before but 5 ton capacity flame proof EOT crane complete all as specified and directed. NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in quoted rate. . 2. Gear box oil shall be measured and paid separately.

All as per item No. 86 here-in-before but 5 ton capacity EOT crane installed at 4CZWKSP, 671 EME complete all as specified and directed. NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in quoted rate. . 2. Gear box oil shall be measured and paid separately.

Supply, fixing and making all connections for limit switch 40 Amps 415 Volts all as per existing for LT/CT/ hoist motion of 10/5 ton capacity crane including taking down unserviceable, complete all as specified and directed.

Supply only gear oil grade 680 suitable for hydraulic thruster brake, complete all as specified and directed.

Supply and fixing brake liner set suitable for 100 mm dia drum for LT/CT motion of 10/5 ton capacity FLP crane inluding taking down unserviceable, complete all as specified and directed.

Supply and fixing brake liner set suitable for 160 mm dia drum for hoist motion of 10/5 ton capacity FLP crane inluding taking down unserviceable, complete all as specified and directed.

Supply and fixing torque springs suitable for 6 kg capacity 100 mm dia drum brakes of LT/CT motion, including taking out the old unserviceable, complete all as specified and directed .

All as per item no 96 here-in-before but 9 kg capacity and 160mm dia drum for LT/CT motion, complete all as specified and directed.

S&F contactor 20 Amps with 2 NO + 2NC including taking out old unserviceable, complete all as specified and directed. Make : L&T/Havells/Legrand.

All as per item no. 98 here-in-before but of 25 amps complete all as specified and directed. Make : L&T/Havells/Legrand.

All as per item no. 98 here-in-before but of 32 amps complete all as specified and directed. Make : L&T/Havells/Legrand.

M & L for push button with element in push button box as per require colour code, including taking out old unserviceable one , complete all as specified and directed.

Supply , fixing and making all connection Rotary limit switch capacity 40 Amps 415 volts all as per existing for LT/CT/Hoist motion of 10/5 ton capacity crane, including taking down old unserviceable, complete all as specified and directed.

Supply and fixing in replacement of brake shoe of crane of capacity 10/5 ton as per existing one, complete all as specified and directed.

Servicing / over hauling of 3 Phase 415 Volts 1440 RPM 40/50 HP capacity induction Motor installed at Sewage Treatment Plant , along with following others repairs. (a). Taking out Motor from its Position by decoupling from Pump and disconnecting all cable connections (b) Dismantaling of induction Motor complete part by part carefully, testing all coils, degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts. (c) Heating & varnishing to stator with super quality varnish and dried out properely with external heat as ordered & directed (d). Reassembeling the motor complete with all existing serviceable parts obtained against Item 1(b), greasing the bearings with bearing grease, and new parts as ordered by Engineer in Charge.( If New parts required shall be measured and paid separately under relevant Item here-in after) (e) Re-install the Motor at its existing Position without any damage, couple with the Pump connecting all cable connections and testing on completion

S&F DE (Driver End) Bearing No. as per existing size, suitable for 40/50 HP Motor against Item No. 104 here-in-above, complete all as specified and as directed. MAKE : SKF/NBC

S&F NDE ( Non Driver End ) Bearing as per existing size, suitable for 40/50 HP Motor against Item No. 104 here-in-above, complete all as specified and as directed. MAKE : SKF/NBC

S&F Motor Shaft suitable for 40/50 HP motor to incorporate against each Item No. 104 here-in-above, complete all as specied and as directed.

S&F Bakelite connection terminal plate with brass nuts bolts and washers suitable for 40/50 HP Motor against Item No. 104 here-in-above, complete all as specified and directed.

Servicing / Overhauling of Electric driven Non Cloging (NC) Pump set having discharge Dis-378 m³/Hr ,H-15.5 Mtr (Pump – Kirloskar) Installed at Sewage Treatment Plant coupled with induction Motor capacity 30 KW (40 HP) along with following others repairs :- a). Taking out Pump from its Position by decoupling from Motor and disconnecting all suction /delivery water connections , setting aside Pump from base plate , b). Dismantaling of Pump complete part by part carefully , degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts. c). Replacement of Gasket set and gland packing rope. (d) Repair/Welding/Grinding of damaged parts e). Reassembeling the Pump complete with all existing serviceable parts obtained against Item 07 (b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge.( New parts shall be measured and paid separately under appropraite Item here-in-after) f) Reinstall the Pump without any damage at its existing Position , couple with the Motor and connecting all suction delivery water connections and testing on completion, complete all as specified and as directed.

S&F DE (Driver End) Bearing as per existing size, suitable for 40 HP Motor against Item No. 109 here-in-above, complete all as specified and as directed.. MAKE : SKF/NBC

S&F NDE ( Non Driver End ) Bearing as per existing size , suitable for 40 HP Motor against Item No. 109 here-in-above, complete all as specified and as directed. MAKE : SKF/NBC

S & F CI Impeller (PROVISIONAL) of Electric driven Non Cloging (NC) Pump coupled with 40 HP Vertical Motor to incorporate against each Item No-109 here-in-above complete all as specified and as directed.

Welding Turning and machining works of Pump Shaft obtained from Item No 109 here-in-before to true size to match with the new Parts / existing serviceable parts for proper allignment and smooth operation of Motor Pump Set complete all as specified and as directed

Servicing / overhauling of 3 Phase 415 Volts 1440 RPM 20 HP capacity Horizontal/Vertical induction motor ( Make- Jyoti, Kirloskar). installed at STP, Butchery and IMPH Chhataghar along with following others repairs. (a). Taking out Motor from its Position by decoupling from Pump and disconnecting all cable connections. (b) Dismantaling of induction Motor complete part by part carefully , testing all coils , degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts. (c) Heating & varnishing to stator with super quality varnish and dried out properely with external heat as ordered & directed. (d) Reassembeling the motor complete with all existing serviceable parts obtained against Item 12 (b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge.( New parts shall be measured and paid separately under relevant Item here-in after) (e) Reinstall the Motor at its existing Position , couple with the Pump connecting all cable connections and testing on completion.

S& F DE (Driver End) Bearing No. as per existing size MAKE : SKF/NBC suitable for 20 HP Motor against Item No. 114 here-in-above, complete all as specified and as directed.

S & F NDE ( Non Driver End ) Bearing as per existing size Make- SKF, NBC suitable for 20 HP Motor against Item No. 114 here-in-above, complete all as specified and as directed.

S & F Bakelite connection terminal plate with brass nuts bolts and washers suitable for 20 HP Motor against Item No. 114 here-in-above, complete all as specified and as directed.

Rewinding burnt coils of Induction Motor stator of capacity 20 HP obtained from Item No-114 here-in-above with super enamelled copper winding wire as per existing size and guage to achieve the required /specified RPM including taking out old unserviceable winding, cleaning/ repairing damaged slots, complete all as specified and as directed.

Servicing / over hauling of Horizontal/Vertical Pump set installed at STP, Butchery and IMPH Chhataghar coupled with Horizontal/Vertical Electric Induction Motor stator cap 20 HP along with following others repairs. (a) Decoupling Vertical Motor from Pump shaft and disconnecting all suction /delivery water connections, setting aside Motor from base plate, complete all as directed by Engr-in-Charge. (b) Dismantaling of Pump complete part by part carefully, degreasing bearing and display all the parts without damaging any portion , for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts. (c) Replacement of Gasket set and gland packing rope .(d)Repair/Welding/Grinding damaged parts of Pump casing. (e) Reassembeling the Pump complete with all existing serviceable parts obtained against Item 17 (b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge. ( New parts shall be measured and paid separately under appropraite Item here-in-after) (f) Lowering column pipes multistaging Pump set inside well ,connecting Suction/ delivery Lines, (g) Reinstall the Motor at its existing Position, couple with the Pump connecting all cable connections and testing on completion.

S &F DE (Driver End) Bearing No. as per existing size suitable for 20 HP Motor against Item No. 119 here-in-above, complete all as specified and as directed. MAKE : SKF/NBC

S & F NDE ( Non Driver End ) Bearing as per existing size Make- SKF, NBC suitable for 20 HP Motor against Item No. 119 here-in-above, complete all as specified and as directed.

S & F CI Impeller as per Existing (PROVISIONAL) Pump coupled with 20 HP Motor against Item No-119 here-in-above complete all as specified and as directed.

Supply & F Pump Shaft (PROVISIONAL) coupled with 20 HP Motor against Item No-119 here-in-above complete all as specified and as directed.

Welding Turning and machining works of Pump Shaft obtained from Item No 119 here-in-before to true size to match with the new Parts/ existing serviceable parts for proper allignment and smooth operation of Motor Pump Set complete all as specified and as directed.

Repairs to sewage non clogging/submersible motor of capacity 10/7.5 HP, 3 Phase, 415 Volts involving the following operations Installed at Pratap Nagar sewage Pump House PH No-1 & 2, transit Camp (a). Disconnecting delivery water connections Lifting column pipes along with connected submersible motor Pump set from Sewage open well, setting aside and stacking column pipes for reuse complete all as directed by Engnr-in-Charge. (b). Dismantaling / Opening of submersible Motor complete part by part carefully, testing all coils, degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in-Charge to ascertain the serviceability of existing parts. (c). Reassembeling the motor complete with all existing serviceable parts obtained against Item 23 (b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge.( New parts shall be measured and paid separately under relevant Item here-in after) (d). Painting the repaired motor and column Pipes externally with one coats of red oxide paint and two coat of synthetic enameal paint of shade as directed by Engnr-in-Charge. (e) Lowering column pipes and submersible Motor Pump set inside well, connecting Suction/ delivery Lines, and testing on completion.

Rewinding of non clogging/submersible sewage motor of capacity 10/7.5 HP obtained from Item Ser No-125 here-in-above with water proof insulated copper wire of existing guage and size to achieve the specified/ required RPM including taking out old unserviceable winding, cleaning/ repairing damaged slots, complete all as specified and as directed.

Repairs to sewage non clogging/submersible motor of capacity 5 HP, 3 Phase, 415 Volts involving the following operations Installed at Transit camp:- (a) Disconnecting delivery water connections Lifting column pipes along with connected submersible motor Pump set from Sewage open well, setting aside and stacking column pipes for reuse complete all as directed by Engnr-in-Charge. (b) Dismantaling / Opening of submersible Motor complete part by part carefully, testing all coils, degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in-Charge to ascertain the serviceability of existing parts. (c) Reassembeling the motor complete with all existing serviceable parts obtained against Item 25(b), greasing the bearing with bearing grease , and new parts as ordered by Engineer in Charge. ( New parts shall be measured and paid separately under relevant Item here-in after) (d) Painting the repaired motor and column Pipes externally with one coats of red oxide paint and two coat of synthetic enameal paint of shade as directed by Engnr-in-Charge. (e) Lowering column pipes and submersible Motor Pump set inside Jackwell ,connecting Suction/ delivery Lines, and testing on completion.

S&F cast iron body and brass gate heavy duty non return valve (NRV) 100 mm bore with flanged end all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable non-return valve (NRV), complete all as specified and as directed. Make : Kirloskar/Sant/Kartar/BIR/KVMC.

S&F cast iron body and brass gate heavy duty non return valve (NRV) 150 mm bore with flanged end all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable non-return valve (NRV), complete all as specified and as directed. Make : Kirloskar/Sant/Kartar/BIR/KVMC

Desilting/ Taking out accumulated sludge, Silt, Sand and Mud etc. from sewage sump/ well of diameter 6.10 Metre and 12.20 Metre deep ( installed at IMPH Chhataghar & Pump House No.1 & 2 at Pratap Nagar, Transit Camp and Main STP) through Manhole, removing/ disposal off the same from site including provision of T&P complete all as specified and as directed.

M&L for draining out water, scraping out scaling of 7 Mtr deep and 4 Mtr bore/ dia Master Manhole, taking out the sludge from sewage sump/ well upto clear bottom or approximate 1.5 Mtr in depth throwing the sludge 200 Mtr away from the site including provision of T&P complete all as specified and as directed.

M&L Cast Iron Sluice Valve 100mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed. Make : Kirloskar/Sant/Kartar /BIR/KVMC

M&L Cast Iron Sluice Valve 150mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.Make : Kirloskar/Sant/Kartar /BIR/KVMC

M&L Cast Iron Sluice Valve 200 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed. Make : Kirloskar/Sant/Kartar /BIR/KVMC

Cutting unaxious green growth and wild grass by manual labour or by machine at all Sewage Installation Premises, along the boundary Fencing, removing rubbish from the Site of Work and deposting where directed not exc. 100 Metre from the starting Point, complete all as specified and as directed. (NOTE : The Item shall be operated in 2 times for the entire Contract period and the measurement will be taken every time independently for Payment.)

Overhauling the reduction gear box assembly fitted in primary/ secondary clarifier by cleaning each job reduction gear box assembly fitted in the primary/ secondary clarifier and applying greasing, filling of gear oil tightening the nuts, bolts including repair/ replacement of unserviceable wheel complete as required at site all as specified and directed.

Overhauling the Bio filter assembly ,complete all as specified and as directed. a) Dismantling Drum,Arms,orifice plates without any damage b) Taking out boulders from bio filter. c) Cleaning Boulders with high pressure jet including biochemical. d) Repair/Replacement of Unsv RCC round slabs e) Desilting silt & Mud from channels and cleaning with f) high pressure jet with Bio chemical. g) Replacement of unsv CI gas Pipeof 80mm Dia including fixing it on RCC slab h) Relaying Bolders after Seggregating Broken boulders i) Filling deficient bolders till the level of Gas Pipe. j) Replacing the Unsv Stainless steel ball in the centre, refilling mercury to the level & changing of unsv orifice plate including cleaning of arms k) Re assembling Drum Arms orifive plate. (New Items required shall be measured and paid separately under relevant Item here-in after)

Cleaning the Raw Water Sewage Sump (Open Type) of dia 7.80 Mtr and 6.60 Mtr deep of Sewage Treatment Plant by removing deposited mud silt etc. at the bottom of Sewage Sump & depositing the same to a distance not less than 150 mtr away from the installation, complete all as specified and directed.

bkgeneralstores

Sunrise Enterprise

M/S S.S.Corporation

Satya Enterprises