SPL REPAIR TO CERTAIN ROADS, SIDE INTERLOCKING FOOTPATH AND ROAD SIDE FURNITURE AT MIL STN KOTA

Amount

M&L for cleaning and preparing the concrete / bituminous surfaces and painting lines, dashes, arrows, letters etc, width not exceeding 10cm wide using hot applied thermo plastic road marking materials not less than 5 kgs per 10 sqm all as specified in clause 803.4 of MOSRT and H specification, white or golden yellow (IS colour No. 356) over a coat of primer the white glass beads for reflectivity etc, complete all using painting machine etc complete all as specified & directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level and remove the same outside of MD land complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base etc, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade with grey cement and no pigment over & including a layer of sand cushion 25mm thick complete all as specified and directed.

M&L for long delinator made out of medium grade MS pipe 75mm dia, 1.20 Mtr high (0.9 m above and 0.30 m below ground level) wrapped wtih high intensity reflector tape in red, yellow and white in colour of 150mm height and 50micron thickness of each. Reflected portion covered with welded mesh of 3mm wire dia and 50mm x 50mm mesh encluding necessory painting, excavation and embedded in PCC (1:2:4) type B-1 with 20mm graded stone aggregate (Block size 25x25x35cm) etc, including taking down old etc, complete all as specified and directed

S&F in repair Bi-Directional reflective type road solar studs, illuminated yellow both side of rectangular / square shape made up of thermoplasitc body fixed on road with bitumen adhesive as per manufacturer's instructions having abrasion resistance ceremic coating and reflective surface etc, complete all as specified and directed.

S&F in repair Bi-Directional reflective type road cat eye, illuminated yellow rectangular / square at centre size (100 x 115mm/100 x 100mm) made up of thermoplasitc body fixed on road with bitumen adhesive as per manufacturer's instructions having abrasion resistance ceremic coating and reflective surface etc, complete all as specified and directed.

S&F in repair, black and yellow Plastic speed breaker including nuts and bolts, made up of ABS materials to highly reflective reflector moulded in EMMA material welded with ABS base plate through ultrasonic welding process of size 350mm length and 263mm width with working width of 250mm, hight 53mm and weight not less than 1200 gm. etc. complete all as specified and directed. Make: M/s Sapphire Road safety product or equivalent as approved by GE

Supply and fixing convex mirror 40 inches/100cms Polycarbonate Traffic mirror unbreakable round wide angle driveway mirror, with adjustable brackets and nuts bolts for installation and mounted on 80 mm dia mild steel pipe of 1000 mm height duly powder coated including embedding in PCC 1:2:4 ( 300x300x400mm) type B1 etc complete all as specified ad directed. Make: ABS Industry or equivalent in Dark eye/TATA BP/Gogia Plastic/Red Safe/Froniter/Tata VPI as approved by GE

Dismantling wrought iron or Mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F stainless steel sign boards supported on legs of 50mm stainless steel 304 grade pipe of hight 2.70m on one side and 2.10m other side with 1.2m x 1.8m SS pipe frame with 40mm x 40mm square pipe and and 3mm ACP sheets both side visibility covered with 12mm x 12mm SS square pipe, digital HP point as per art work reflective complete all as specified and directed.

S&F stainless steel direction boards of size 4.2m x 1.6 m, supported on legs 100mm stainless steel 304 grade square pipe of clear height 3.10m on each side with 4.2m x 1.60m SS pipe frame with 40mm x 40mm square pipe and 3mm ACP sheets one side visibility covered with 12mm x 12mm SS square pipe, digital HP point as per art work reflective complete all as specified and directed.

S&F stainless steel speed limit boards of size 75cm dia supported on legs 50mm stainless steel 304 grade square pipe of height 2.40m and 60cm inner dia frame of 50mm SS pipe and 50mm x 25mm covered SS ractangular pipe including 3mm ACP sheets both side visibility digital HP point as per art work reflective complete all as specified and directed.

Schedule of Credit

M/S HARI CONSTRUCTION

RAHUL ENTERPRISES

M/S R.K. Builders & Developer

AMIT RISHABH BUILDERS PVT LTD

SINGH ENTERPRISES