SITC of water purifier cum cooler and allied electrical works at Kandi SCH.

Amount

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 6 A & 20A Modular type plug socket with 6A & 20A Modular type switch respectively, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.. (Make - Legrand Arteor/Myrius/ Honeywell Mk-Wraparound). As per direction of EIC.

SITC of Green Model Cooler cum Purifier ( Intregrated inbuilt with cooler and purifier in a single unit ) 80 ltrs storage capacity. with external diamensions 640 mm x 450 mm x 1350 mm ( ± 10% ) , (W x D x H ) , Operating Power Supply - 230 ± 10 % v AC, 50 Hz, running current in amps (max)-3.2 ± 10 %, Power in watts-625 ± 10 %,Water storage tank capacity-80 ltr,capacity with comfort level water outlet temperature at 17 deg c-60 lph,refrigent-r134 ( Green Gas ) 22, Compressor make- Emerson,thermal insulation for storage tank- puf,total no. of faucets-02 (1 normal+1 cold), recommendd max water flow rate through the faucets in lpm-1.5,no of stages for filter cum purifier-03,no of purifier circuits-03,purifier fault indication (buzzer),visual control (leds),water flow swith,10 minutes UV auto shut off,storge tank material & body material- front SS 304 & rest pre coated steel,working with -0.4 kg/cc min. water input pressure and 2 kg/cc of max. water input pressure, integrated water cooler cum purifier with end point/last point purification technology, including one year warranty as per condition. make EUREKA FORBES /KENT / UNILEVER (Brand approved by EIC)

Supply and installation of Commercial 24’’ Iron remover vessel Suitable for removal of iron from water having specification as given below i) Maximum Flow Rate - 200 L/hr ii) Inlet water Pressure/Temp. (Min.) - 1.0 kg/cm²/1°C iii) Inlet water Pressure/Temp. (Max.) - 10 kg/cm²/50°C (make : Eureka Eorbes/ as per direction of EIC)

S/F of connector pipe for inlet and outlet with vent facility.(1/2" & 1/4" dia)

Supply & delivery of 1200 mm AC ceiling fan (Make - Usha / Crompton)

ABHIJIT KARMAKAR (BID ID -5723470)

SRIDAM MONDAL (BID ID -5723493)