Restoration of BT Road from Fortune Land Mark to Geethaditya Car Garrage and from D.No. 73-12-20/6M to 73-7-20/6L and Vermi Compost Beside street and from D.No. 72-33-1/2 to 72-33-1/3 at Cyclone Colony in 1st division of RMC.

Scarifying the existing BT surface to a depth of 50mm by mechanical means and disposal of scarified material with all leads and lifts upto 1000Mtrs. As per MORT&H (4th revision) specn No. 305.4.3 (Picking)

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Providing and applying tack coat with bitumen 80/100 grade (s-90) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH

Providing and Laying Bitumenous Mecadam with 100-120 TPH / 40-60 TPH hot mix plant providing and average output of 75 t / hr. using crushed aggregates of specified grading premixed with bitumenous binder, trasnported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction as per Tech. specification clause 504 MORTH.

Providing and laying bituminous concrete with 40-60 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading -II, premixed with bituminous binder VG30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) Without Form Work

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

3) Provision for Seigniorage charges

4) DMF @30% on Seigniorage charges

5) MERIT @2% on Seigniorage charges

6) Consideration 100% on Seigniorage charges

Scarifying the existing BT surface to a depth of 50mm by mechanical means and disposal of scarified material with all leads and lifts upto 1000Mtrs. As per MORT&H (4th revision) specn No. 305.4.3 (Picking)

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Providing and applying tack coat with bitumen 80/100 grade (s-90) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH

Providing and Laying Bitumenous Mecadam with 100-120 TPH / 40-60 TPH hot mix plant providing and average output of 75 t / hr. using crushed aggregates of specified grading premixed with bitumenous binder, trasnported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction as per Tech. specification clause 504 MORTH.

Providing and laying bituminous concrete with 40-60 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading -II, premixed with bituminous binder VG30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) Without Form Work

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.