Construction of footpath and installation of heritage lamps from mangalpet cross to DS house and improvements to mangalpet cross (FOR CAT-II(A)

Construction of footpath and installation of heritage lamps from mangalpet cross to DS house and improvements to mangalpet cross

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

Providing & fixing RCC Pre-cast Cover Slab of size 0.8 m x 0.8 m x 0.2m of M25-Design mix concrete with 12 mm steel @ 120 mm c/c both ways, over Gate valve extension spindle with central opening along...

Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...

Supplying and laying double walled corrugated(DWC) HDPE pipe including all necessary connecting sockets/couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suita...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

a) 3x95 to 150 Sqmm

(ESCOM SR 2023-24 Page No. 13 Item Sl.No. 2...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supplying and fixing of heavy duty Brass Cable Gland suitable for UG cable of 1.1 class a) 25 mm

(PWD Comm SR Escom 2023-24 Vol - VI Page No.28 Item No. 63.01 Sl.No. 507)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the follwing sizes a) Installation of Pre-Insulated Lug - CPTAU for 16 Sqmm (PWD Comm SR Escom 2023-24 Vol - VI Pag...

b) Installation of Pre-Insulated Lug - CPTAU for 25 Sqmm

(PWD Comm SR Escom 2023-24 Vol - VI Page No.54 Item No. 24.22 Sl.No. 227)

GI/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required GI/Copper strips 25 x 3 mm GI strip

(PWD Comm SR Ele 2023-24 Vol - VI Page No.54 Item No. 12.58.2)

Supply and fixing polished wood board made of not less than 15 mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20" x 2...

Supplying and fixing hylum plastic sheet 3 mm thick with necessary nitches for fixing switches, regulators etc.,and fixing on existing wood or metal box using N. F. screws

(PWD Comm SR Ele 2023-24 Vol...

Fabricating supplying and mounting MS box made out....SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Supplyandfixingof3polepowercontactorwithNO/NCcontactsonexistingwood/panelboardusingnecessarybolts,nuts,washersand wiring etc., complete with AC-3 Rating and as per IS-13947.

60 A (PWD Comm SR Ele 2023...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase4 wire whole current class-1 Accuracy Energy Meter

(PWD Comm SR Ele 2023-24 Vol - VI Page No.19 Item No. 5.35)

Supplying and fixing Micro processor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting. (PWD Comm SR Ele 2023-24 Vol - VI Page No...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking cap...

Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board 63 A 4 pole

(PWD Comm SR Ele 2023-24 Vol - VI Page No.18 Item No. 5.20.10)

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S.Flat...... With bolts,washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40...

Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCCce...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment' son themeter board using 40 mm dia 2.90 mm thick GIpipe 2.5 m long buried in a pit. The pit should...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 A (PWD Comm SR Ele 2023-24 Vol - VI Page No.14 Item No.5.7.4)

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.125 A (PWD Comm SR Ele 2023-24 Vol - VI Page No.15 Item No.5.8.3)

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD Comm SR Ele 2023-24 Vol - VI Page No.19 Item No.5.38)

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...