Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.6 Cr
EMD Value
₹2.6 L
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer City (R&B) Division, Rajkot
Constrtruction of Additional Floor at Mamlatdar Rajkot City (West) at Rajkot.
364940
18 of 2026-27 [18/1]
Open
Civil Works - Buildings
Works
Rajkot
8 documents required · 8 mandatory
₹3,600
Executive Engineer, City (R&B) Division, Rajkot.
₹2.6 L
12 Nov 2026
12 Nov 2026
12 Nov 2026
25 Nov 2026
12 Nov 2026
90 days
Name of Work:- Construction of Additional Floor at Mamlatdar Office, Rajkot City (West) at Rajkot.
BILL OF QUANTITIES
It. Description of Item (with brief specification and reference
Quantity Unit Rate Amount
No. to book of specifications)
In figures In words
1 Demolition of Cement Concrete and disposal of unserviceable 42.00 cum. 670.18 Rupees Six Hundred
materials with all lead and lift. Seventy And Paise
2 Demolition of R.C.C. Work including stacking of serviceable 49.00 cum. 1163.64 Rupees One Thousand
materials and disposal of unserviceable materials with all lead One Hundred Sixty
and lift. Three And Paise Sixty
3 Demolition of Brick work and Stone Masonry in Cement Mortar 35.00 cum. 602.54 Rupees Six Hundred
including stacking of serviceable materials and disposal of Two And Paise Fifty
unserviceable materials with all lead and lift. Four Only
4 Dismantling tiled or stone floors laid in mortar including 771.00 sqm. 52.49 Rupees Fifty Two And
stacking of serviceable materials and disposal of unserviceable Paise Forty Nine Only
materials with all lead and lift.
5 Dismantling Steel Work including distempering and stacking 118.00 kg. 4.02 Rupees Four And Paise
the materials with all lead and lift. Two Only
6 Dismantling Doors, Windows, Ventilators etc. (wood or steel) 5.00 No. 206.48 Rupees Two Hundred
shutters of all Sizes including chowkhats, architraves, Six And Paise Forty
holdfasts, and other attachments etc. complete and stacking Eight Only
them within all lead and lift.
7 Dismantling C.I. Pipes, G.S.W. pipes and A.C. rain water pipes 54.00 Rmt. 82.24 Rupees Eighty Two And
of any dia. with fittings and clamps inlcuding stacking the Paise Twenty Four Only
materials with all lead and lift.
1 DTP Mamlatdar Office (West) RJT ~ BoQ
8 Dismantling of Aluminium / Wooden / Dry Wall Partition 14.00 sqm. 61.61 Rupees Sixty One And
including Framing work etc., including stacking of serviceable Paise Sixty One Only
materials and disposal of unserviceable materials with all lead
9 Conveyance of building debris outside Nagarpalika Limit, 166.00 cum. 82.61 Rupees Eighty Two And
transporting with contractor's own vehicle. Paise Sixty One Only
10 Providing and laying controlled cement concrete M:20 and 42.00 cum. 7941.63 Rupees Seven
curing complete including the cost of formwork but excluding Thousand Nine
the cost of reinforcement for reinforced concrete work in Hundred Forty One And
Columns for Second Floor. Paise Sixty Three Only
11 Providing and laying controlled cement 1:3:6 and curing 18.00 cum. 6789.22 Rupees Six Thousand
complete including the cost of formwork but excluding the cost Seven Hundred Eighty
of reinforcement for reinforced concrete work in Columns for Nine And Paise Twenty
Second Floor. Two Only
12 Providing and laying controlled cement concrete M:20 and 98.00 cum. 6448.85 Rupees Six Thousand
curing complete including the cost of formwork but excluding Four Hundred Forty
the cost of reinforcement for reinforced concrete work in Eight And Paise Eighty
FLOOR BEAM for S.F. Five Only
13 Providing and laying controlled cement concrete M:20 and 141.00 cum. 6899.31 Rupees Six Thousand
curing complete including the cost of formwork but excluding Eight Hundred Ninety
the cost of reinforcement for reinforced concrete work in SLAB Nine And Paise Thirty
for S.F. One Only
14 Providing and laying controlled cement concrete M:20 and 6.00 cum. 7465.92 Rupees Seven
curing complete including the cost of formwork but excluding Thousand Four
the cost of reinforcement for reinforced concrete work in Hundred Sixty Five And
STAIRCASE for S.F. Paise Ninety Two Only
15 Providing and laying controlled cement concrete M:20 and 30.00 cum. 7123.53 Rupees Seven
curing complete including the cost of formwork but excluding Thousand One
the cost of reinforcement for reinforced concrete work in WALL Hundred Twenty Three
for S.F. And Paise Fifty Three
2 DTP Mamlatdar Office (West) RJT ~ BoQ
16 Providing and laying controlled cement concrete M:20 and 2.00 cum. 7363.91 Rupees Seven Thousand
curing complete including the cost of formwork but excluding Three Hundred Sixty
the cost of reinforcement for reinforced concrete work in Three And Paise Ninety
LINTEL for S.F.
17 Providing TMT Bar FE 500D reinforcement for R.C.C. work 54400.00 kg. 79.48 Rupees Seventy Nine
including bending, binding and placing in position complete for And Paise Forty Eight
all floors. Only
18 Providing and laying cement concrete 1:4:8 (1-cement : 4- 6.00 cum. 2932.03 Rupees Two Thousand
Sand : 8-Crust stone aggregate 40mm nominal size) & curing Nine Hundred Thirty Two
complete excluding cost of formwork for all floors. And Paise Three Only
19 Brick work using common burnt clay building bricks having 124.00 cum. 4766.34 Rupees Four Thousand
crushing strength not less than 35 kg./sq.cm. in superstructure Seven Hundred Sixty
above plinth in Cement Mortar 1:5 (1-Cement : 5-fine sand) Six And Paise Thirty
using conventional bricks for S.F. Four Only
20 Half brick masonry in common brunt clay building bricks having 371.00 sqm. 720.21 Rupees Seven Hundred
crushing strength not less than 35 kg/sq.cm. in Cement mortar Twenty And Paise
1:4 (1-Cement:4-coarsesand) in Super structure using Twenty One Only
conventional bricks for Second Floor.
21 Providing and fixing chicken mesh jali with square of 16 x 24 162.00 sqm. 280.78 Rupees Two Hundred
mm of 25 gauge at junction the Brick.masonary and Eighty And Paise
reinforcement cement concrete member, work done before Seventy Eight Only
plastering work including scaffolding etc complete.
22 Making decorative groove for border of any thickness and 985.00 Rmt. 45.83 Rupees Forty Five And
width for design in plaster as directed by engineer in charge. Paise Eighty Three
23 Providing 15mm thick cement plaster in single coat on 1467.00 sqm. 208.64 Rupees Two Hundred
brick/concrete walls for interior plastering and finished even Eight And Paise Sixty
and smooth in Cement mortar 1:4 (1-cement :4-sand) for all Four Only
3 DTP Mamlatdar Office (West) RJT ~ BoQ
24 Providing 10mm thick cement plaster in single coat on ceilings 1067.00 sqm. 243.42 Rupees Two Hundred
and sofits for interior plastering and finished even and smooth Forty Three And Paise
in Cement mortar 1:3 (1-cement:3-sand) for all Floor. Forty Two Only
25 20mm thick sand faced cement plaster on walls upto all height 1649.00 sqm. 332.47 Rupees Three Hundred
above ground level consisting of 12mm thick backing coat of Thirty Two And Paise
C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of Forty Seven Only
C.M. 1:1 (1-cement : 1-sand) etc. complete.
26 Providing 20mm thick cement plaster in single coat on brick / 113.00 sqm. 308.05 Rupees Three Hundred
concrete walls for interior plastering and finished even and Eight And Paise Five
smooth in Cement mortar 1:3 (1-cement : 3- sand) including Only
providing floating coat of near cement slurry and also providing
waterproofing compound as recommended by the manufacture
etc. complete for all floors.
27 Providing cement vata (10cm. x 10cm. size) quarter round in 205.00 Rmt. 24.28 Rupees Twenty Four
Cement Mortar 1:1 including neat cement finishing, watering And Paise Twenty Eight
etc. complete. Only
28 Filling in foundation and plinth with brick Bats, chharas in 19.00 cum. 629.48 Rupees Six Hundred
layers of 20cm. thickness including watering, ramming and Twenty Nine And Paise
consolidating etc. comp. Forty Eight Only
29 Providing & Laying Vitrified Tiles 8 to 10 mm thick, 600 mm x 670.00 sqm. 1155.44 Rupees One Thousand
600 mm in flooring, treads of steps and landing on a bed of 12 One Hundred Fifty Five
mm thick cement mortar 1:3 (1 cement : 3 coarse sand) And Paise Forty Four
finishing with flush pointing in white cement etc. complete Only
using 90% light shade and 10% dark shade as per Architect's
30 Providing & Laying Vitrified Tiles 8 to 10 mm thick, 600 mm x 33.00 sqm. 1195.02 Rupees One Thousand
600 mm in skirting, risers of steps and dado on a bed of 10 One Hundred Ninety
mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and Five And Paise Two
jointed with white cement slurry etc. Only
4 DTP Mamlatdar Office (West) RJT ~ BoQ
31 Providing & Fixing Glass Mosaic tiles on finished plain wall 257.76 sqm. 3330.98 Rupees Three
surface of size 20 mm x 20 mm x 4 mm in all colour, design, Thousand Three
fixing in customized / random design as per direction of Hundred Thirty And
Engineer-in-Charge. The glass mosaic tiles to be fixed on the Paise Ninety Eight Only
wall surface with the help of approved adhesive applied at the
rate of 2.5 kg/sqm. and grouting of the same. The rate shall be
inclusive of all operation, material and required pattern
approved by Engineer-in-Charge.
32 Providing and laying Antiskid Ceramic tiles 8mm thick in 37.00 sqm. 1017.30 Rupees One Thousand
flooring treads of steps and landing laid on a bed of 12mm Seventeen And Paise
thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing Thirty Only
with flush pointing in white cement.
33 Providing and laying coloured glazed tiles of the size 300mm x 179.00 sqm. 1569.16 Rupees One Thousand
200mm x 8mm / 300mm x 450mm x 8mm in skirting, risers of Five Hundred Sixty
steps and dedo on 10mm thick cement plaster 1:3 (1-Cement : Nine And Paise Sixteen
3-Coarse sand) & jointed with white/colour cement slurry. Only
34 Providing and laying Granite slab (18mm thick) for Jambs, Sills 142.00 sqm. 3882.44 Rupees Three
& Soffits in Single Piece as per the width of Opening over Thousand Eight
20mm thick base of cement mortar 1:3 (1-cement : 3- coarse Hundred Eighty Two
sand and jointed with grey cement slurry including rubbing and And Paise Forty Four
flooring with single pieces on width of staircase and moulding Only
the edge and manage groove etc. complete.
35 Providing and fixing sandwich type platform of 60/70cm wide 3.00 sqm. 7665.90 Rupees Seven
and 75cm high from finished floor level using 25mm thick Kota Thousand Six Hundred
stone slab as a base and 18mm thick mirror polished full round Sixty Five And Paise
edged granite slab on top , 25mm thick mirror polished Kota Ninety Only
stone supports of 70cm wide at 45 cm c/c or as directed
including providing Granite side 'Patta' of 30cm wide on three
sides of the platform as per detailed drawing etc. complete as
5 DTP Mamlatdar Office (West) RJT ~ BoQ
36 Providing and fixing machine cut Both side mirror polished 82.00 sqm. 979.70 Rupees Nine Hundred
Kotah stone for shelves 25 to 40mm thick with front side Seventy Nine And
rounding edge including making groove in walls and finished Paise Seventy Only
the same in CM 1:2 (1-cement:2-sand) etc. complete
37 Providing and laying 50mm thick cement concrete flooring 783.00 sqm. 355.21 Rupees Three Hundred
1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate Fifty Five And Paise
20mm nominal size) laid in one layer finished with a floating Twenty One Only
coat of neat cement.
38 Providing and mixing water proofing materials in cement 286.00 Per Bag 49.25 Rupees Forty Nine And
mortar in proportion recommended by the manufacturer. of Paise Twenty Five Only
39 Providing and using polyester fibre (6mm) with triangular or 286.00 1 Pkt 26.26 Rupees Twenty Six And
equivalent cross section with specific gravity 1.35 to 1.40 (as a of 125 Paise Twenty Six Only
secondary reinforcement) in mortar of any grade at the rate of Gms.
125gms. per 50 Kg. of Cement Consumption.
40 Providing and laying broken china mosaic flooring for terrace 783.00 sqm. 779.69 Rupees Seven Hundred
using 12 mm to 20 mm broken pieces of glazed tiles to be laid Seventy Nine And
over cement mortar 1:3 to plain or slope and to be tempered to Paise Sixty Nine Only
bring mortar creme out upto surface using white cement
including rounding off junctions and extending them upto
cm along the wall,clearing with water and oxalic acid etc. as
41 Providing and fixing 35mm thick flush door solid core 42.00 sqm. 7215.44 Rupees Seven
construction of ISI quality with both side lamination including Thousand Two Hundred
Granite frame of 20 mm thick with inner strip of 200 x 20 mm Fifteen And Paise Forty
and outer strip of 100 x 20 mm including fixing with adhesive Four Only
material to make the door frame, cutting 45° for vertical &
horizontal member include fixing the door with all heavy type
stainless steel fixtures and fastenings with mortice lock etc.
6 DTP Mamlatdar Office (West) RJT ~ BoQ
42 Providing and fixing FRP frame size 125x65 mm and 35mm 15.00 sqm. 2615.04 Rupees Two Thousand
thick FRP shutter with wood grain raised panneled design Six Hundred Fifteen
finish shutter having extra reinforcement on sides & edges in And Paise Four Only
Gel coat finish. The core of the shutter & frame is to be filed up
with injected polyurethene foam done in situ alongwith
embedded wooden pieces for stiffening & also taking hinges &
fintures. The whole FRP frame & shutter is to be water proof
weather proof, termite proof & resistance to mild acid/alkali.
Rates are to be inclusive of S.S hinges with fastener sleeve &
alluminium fixtures & fastenings.
43 Providing and fixing window having extruded aluminium Colour 18.00 sqm. 3899.61 Rupees Three
anodized section with Four Track with four shutters (3- Glass Thousand Eight
+ 1 Mosquito) with horizontal frame bottom gutter Zindal 21198- Hundred Ninety Nine
size164.90 mmx51.00mm x2.00mm @ wt. of 3.197 Kg/mt, And Paise Sixty One
Frame top and side Zindal 21204 of size 164.90mm x Only
41.00mm x 1.60 mm @ wt. of 1.694 kg/mt for shutter top and
bottom Zindal 20993, size 71.00 X 30.00 X1.31mm @ Wt.
0.839 kg/mt. Shutter interlock Zindal 20550- size 50.00 X
40.00 X 1.80mm @ Wt. 0.994 kg/mt. Shutter Handle side
Jindal series 20553- 50.80 x 30mm x 1.60mm @ wt. of
0.731Kg/mt with 5 mm thick transparent bronze colour tinted
float glass with transparent silicon sealant for glass work,
aluminium Powder Coated fittings and fixtures with S.S.
Mosquito net for One shutter and top fix window as per detail
drawing etc. complete.
7 DTP Mamlatdar Office (West) RJT ~ BoQ
44 Providing & fixing Openable / Casement aluminium anodized 61.00 sqm. 8075.96 Rupees Eight
section window with Jindal frame section of 21131/21132 @ Thousand Seventy Five
wt. 3.5 kg./Rmt., shutter section of 20786 @ 0.778 kg./Rmt., And Paise Ninety Six
including with 5 mm thick transparent bronze colour tinted float Only
glass, with Fixed Louvers at Top & Fixed Glazing at Bottom of
aluminium section of size 63.50 x 38.10 x 1.95 mm @
kg./Rmt., including necessary fixtures & fastening such as
mm hinges, 150 mm handle, 150 mm stopper, door catcher,
etc. all aluminium Powder Coated Fixtures etc. complete.
45 Providing and fixing window having extruded aluminium Colour 12.00 sqm. 4027.88 Rupees Four Thousand
Anodized section frame main outer size Equivalent to Jindal Twenty Seven And
series 14053- 95mm x 24mm x 1.17mm @ wt. of 0.738 Kg/mt Paise Eighty Eight Only
with horizontal Three track Frame with Three Shutters (2 -
Glass Shutter + 1 - Mosquito Net Shutter) with bottom track
member of size 92mm x 31.75mm x 1.30 mm @ Wt.
kg/mt, Frame Top and Side track member of size 92mm x
31.75mm x 1.50 mm @ Wt. 1.06 kg/mt, Shutter Top & Bottom
40mm x 18mm x 1.29mm @ Wt. 0.456 kg/m, Shutter Vertical
member of size 40mm x 18mm x 1.29mm @ Wt. 0.456 kg/m,
with 5 mm thick transparent bronze colour tinted float glass
with aluminium Powder Coated fittings and fixtures and
transparent silicon sealant, glass fixing to frame as per details
with top fix and
46 Providing window as per
fixing Twodrawing
Track etc. complete.
Frame with Two Shutters 3.00 sqm. 5167.16 Rupees Five Thousand
window having extruded aluminium Colour Anodized section One Hundred Sixty
main frame outer size Equivalent to Jindal series 20786 - 95 Seven And Paise
mm x 24.10 mm x 1.17 mm (Wt. @ 0.778 kg./rmt.), Shutter Sixteen Only
Horz.. & Vert. Frame Members 21311 & 21312 - 92 mmx
31.75 mm x 1.50 mm (Wt. @ 3.50 kg./rmt.), with 5 mm thick
transparent bronze colour tinted float glass with aluminium
Powder Coated fittings and fixtures and transparent silicon
sealant, glass fixing to frame as per details as per drawing etc.
8 DTP Mamlatdar Office (West) RJT ~ BoQ
47 Providing and fixing Fixed Glass Window having extruded 41.00 sqm. 1893.75 Rupees One Thousand
aluminium Colour Anodized section main frame Jindal Series Eight Hundred Ninety
20786 - 95 mm x 24.10 mm x 1.17 mm (Wt. @ 0.778 kg./rmt.) Three And Paise
with 5 mm thick transparent float glass with Aluminium Powder Seventy Five Only
Coated fittings and fixtures and transparent silicon sealant,
glass fixing to frame as per details as per drawing etc.
48 Providing & fixing coloured anodized aluminium section 11.00 sqm. 1726.09 Rupees One Thousand
louvered ventilator with frame size 63x38.10mm mm thick with Seven Hundred Twenty
4mm thick ground glass and coloured anodized aluminium Six And Paise Nine
louvers fixtures and hold fasting etc. complete. Only
49 Providing and fixing M.S. Plain Grill of required pattern to 2658.00 kg. 120.19 Rupees One Hundred
wooden frames of windows etc. with M.S. flats at required Twenty And Paise
spacing and frame around, square or round bars with round Nineteen Only
headed bolts and nuts or by screws incl. one coat of priming
coat & two coat of oil paint etc. complete.
50 Structural steel work ( Confirming to IS 4923-1997) riveted, 436.00 kg. 131.82 Rupees One Hundred
bolted or welded in builtup for all type hollow pipe sections,in Thirty One And Paise
framed work, including cutting, hoisting, fixing in position and Eighty Two Only
applying a priming coat of approved steel primer all complete
as per the structural designs and directions of Engineer in
51 Providing and fixing colour coated corrugated/ semi corrugated 21.00 sqm. 764.57 Rupees Seven Hundred
Galvalume sheet 0.50mm thick roofing fixed with GI "J" or "L" Sixty Four And Paise
hooks bolts and nuts 8mm dia with bitumen washer filled with Fifty Seven Only
white lead complete excluding cost of purlins, rafers and
9 DTP Mamlatdar Office (West) RJT ~ BoQ
52 Providing and fixing AISI 316 Grade stainless steel Modular 13.00 Rmt. 6080.20 Rupees Six Thousand
knock down railing system comprising 50mm dia railing fixed Eighty And Paise
on 32 mm dia S.S. Balustrade of 1050 mm height with 16 mm Twenty Only
dia. S.S. Pipe 100mm high - placed at maximum 600 mm C/C
distance along with three S.S. horizontal members of 16 mm
dia connected at the side of balustrade with S.S. brackets. The
balustrade shall be mounted on floor with base plate using
specially designed anchor fasteners and concealed by AISI
316 Grade S.S. base cover cap (Wall thickness of pipes shall
be taken as 1.50 mm along with all visible component
developed in high grade S.S. and wherever required, joints to
be filled with bushings for extra strength)
53 Providing and fixing AISI 316 Grade stainless steel Modular 16.00 Rmt. 2282.60 Rupees Two Thousand
knock down railing system for Height 150 to 200 mm Two Hundred Eighty
comprising 50mm dia railing fixed on 16 mm dia S.S. Support Two And Paise Sixty
for side or top of RCC / Brick Wall placed at maximum 300 mm Only
C/C distance. The support shall be mounted on floor/wall with
base plate using specially designed anchor fasteners and
concealed by AISI 316 Grade S.S. base cover cap (Wall
thickness of pipes shall be taken as 1.50 mm along with all
visible component developed in high grade S.S. and wherever
required, joints to be filled with bushings for extra strength)
54 Providing & Fixing S.S. 304 Grade Grab Bar for Handicapped 5.00 Rmt. 802.95 Rupees Eight Hundred
Toilet for W.B., Urinal, WC Pan and other areas, made of Two And Paise Ninety
32/40 mm dia. Including providing S.S. caps and fixing to walls Five Only
and floor etc. complete as per drawing and as directed by EIC
10 DTP Mamlatdar Office (West) RJT ~ BoQ
55 Providing & Fixing Anodized Aluminium work for Grills, 25.00 sqm. 4095.55 Rupees Four Thousand
Louvers, Doors, Windows, Ventilators and partitions with Ninety Five And Paise
extruded built up standard tubular sections / appropriate Z Fifty Five Only
sections and other sections of approved make conforming to
IS: 733 and IS: 1285, fixing with dash fasteners of required dia.
and size, including necessary filling of the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber /
neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever
required including providing cleat angle, aluminium snap
beading for glazing / panelling, C.P. brass / stainless steel
screws etc. all complete as per architectural drawings and the
direction of Engineer-in-Charge. [Note: Glazing, panelling and
dash fasteners if required, to be paid for separately]
56 Providing and fixing wash down water closet (Wall Hung 5.00 No. 10488.85 Rupees Ten Thousand
European type WC pan) CERA Compact or equivalent quality Four Hundred Eighty
490 X 350 X 330 MM with PVC soft close seat cover inlet & Eight And Paise Eighty
outlet gasket, CI chair brackets including concealed type flush Five Only
cock of standard quality with health faucet, angle cock etc.
57 Providing and fixing wash down water closet (Anglo Indian type 1.00 No. 1775.58 Rupees One Thousand
WC pan) with PVC seat cover inlet & outlet gasket including Seven Hundred
concealed type flush cock of standard quality with health Seventy Five And Paise
faucet, angle cock etc. complete. Fifty Eight Only
58 Providing and fixing flat back half stall type urinal in white 1.00 No. 2318.96 Rupees Two Thousand
colour including necessary PVC waste pipe, PVC waste Three Hundred
coupling, water spreader & 15mm C.P. Brass Stop cock fitting Eighteen And Paise
all labour and materials. Ninety Six Only
11 DTP Mamlatdar Office (West) RJT ~ BoQ
59 Providing and fixing flat back wash basin of 550 x 400mm size 1.00 No. 2510.86 Rupees Two Thousand
including C.I. or M.S. brackets fixing in wall C.P. brass work of Five Hundred Ten And
32mm dia, fisher union of 32mm, pillar cock of 15mm dia, PVC Paise Eighty Six Only
waste pipe, PVC connection, brass stopcock of 15mm dia etc.
60 Providing and fixing Counter Top wash basin CERA Carmona 5.00 No. 5425.72 Rupees Five Thousand
Cat. No. S2020162 of size 485X380X110mm or equivalent Four Hundred Twenty
with white colour including C.I. or M.S. brackets fixing in wall Five And Paise Seventy
C.P. brass west of 32mm dia,. fisher union of 32mm, pillar Two Only
cock of 15mm dia, PVC waste pipe, PVC connection, brass
stopcock of 15mm dia etc. complete.
61 Providing and fixing 5mm thick glass mirror machine cut 5.00 sqm. 1134.23 Rupees One Thousand
belveled edge mounted on wall with special type wall touch SS One Hundred Thirty
mirror bracket fixing with necessary plugs. Four And Paise Twenty
62 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain 14.00 No. 628.18 Rupees Six Hundred
with jali of the 100mm nominal diameter of self cleansing Twenty Eight And Paise
design with C.I. Scrwed down or hinged grating including the Eighteen Only
cost of cutting and making good the walls.
63 Providing and fixing 150x150mm square S.S. Jali of Self 14.00 No. 102.01 Rupees One Hundred
cleaning design on 100mm dia nanhi trap including cost of Two And Paise One
cutting and making good the walls. Only
64 Providing and fixing 100mm x 100mm size P type S.W. gully 5.00 No. 1292.19 Rupees One Thousand
trap with C.I. grating brick masonry chamber and water tight Two Hundred Ninety
C.I. cover with frame of 300mm x 300mm size (inside) with Two And Paise
standard weight. Square mouth traps. Nineteen Only
12 DTP Mamlatdar Office (West) RJT ~ BoQ
65 Providing, laying and jointing in true line and level 50 mm 21.00 Rmt. 784.77 Rupees Seven Hundred
diameter U.P.V.C. SWR Type B-Pipe conforming to IS 13592- Eighty Four And Paise
1992 with one end plain and other end socketed with rubbering Seventy Seven Only
& fitting conforming to IS : 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp at every 2000mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends,
shoes etc. including testing of pies and joints and jointed with
adhesive solvent cement including cost of all materials.
66 Providing, laying and jointing in true line and level 90 mm 20.00 Rmt. 857.49 Rupees Eight Hundred
diameter U.P.V.C. SWR Type B-Pipe conforming to IS 13592- Fifty Seven And Paise
1992 with one end plain and other end socketed with rubbering Forty Nine Only
& fitting conforming to IS : 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diameter x 210mm length x 196mm
high at every 2000mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends,
shoes etc. including testing of pies and joints and jointed with
adhesive solvent cement including cost of all materials.
13 DTP Mamlatdar Office (West) RJT ~ BoQ
67 Providing, laying and jointing in true line and level 110 157.00 Rmt. 918.66 Rupees Nine Hundred
diameter U.P.V.C. SWR Type B-Pipe conforming to IS 13592- Eighteen And Paise
1992 with one end plain and other end socketed with rubbering Sixty Six Only
& fitting conforming to IS : 14735-1999 of approved make for
drainage system pipe line, pipe shall be jointed with each other
with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160mm diameter x 210mm length x 196mm
high at every 2000mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends,
shoes etc. including testing of pies and joints and jointed with
adhesive solvent cement including cost of all materials.
68 Providing and fixing in position 90mm dia P.V.C. cowl vent to 5.00 No. 40.40 Rupees Forty And
pipes Paise Forty Only
69 Providing and fixing in position 110mm dia P.V.C. cowl vent to 17.00 No. 45.45 Rupees Forty Five And
pipes Paise Forty Five Only
70 Providing laying and jointing in true line and level 50mm dia. 103.00 Rmt. 195.66 Rupees One Hundred
U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as Ninety Five And Paise
approved by Engineer In Charge. Pipe shall be fixed on the Sixty Six Only
wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
71 Providing laying and jointing in true line and level 40mm dia. 20.00 Rmt. 148.11 Rupees One Hundred
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as Forty Eight And Paise
approved by Engineer In Charge. Pipe shall be fixed on the Eleven Only
wall with the help of clamp at every two metre C/C or shall be
concealed as directed includingnecessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
14 DTP Mamlatdar Office (West) RJT ~ BoQ
72 Providing laying and jointing in true line and level 25mm dia. 32.00 Rmt. 91.83 Rupees Ninety One
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as And Paise Eighty Three
approved by Engineer In Charge. Pipe shall be fixed on the Only
wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
73 Providing laying and jointing in true line and level 15mm dia. 33.00 Rmt. 72.64 Rupees Seventy Two
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as And Paise Sixty Four
approved by Engineer In Charge. Pipe shall be fixed on the Only
wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
74 Providing and fixing concealed center point to wall ceilling & 72.00 Rmt. 253.82 Rupees Two Hundred
Floor CPVC (SDR 13.5) 25mm dia. pipe having National Fifty Three And Paise
Sanitation Foundation (NSF) seal for potable water of following Eighty Two Only
dia. nominal bore tube fitting and clamps including making
good the wall, ceilling and floor etc. complete. dia.
75 Providing and fixing concealed center point to wall ceilling & 7.00 Rmt. 170.35 Rupees One Hundred
Floor CPVC (SDR 13.5) 15mm dia. pipe having National Seventy And Paise
Sanitation Foundation (NSF) seal for potable water of following Thirty Five Only
dia. nominal bore tube fitting and clamps including making
good the wall, ceilling and floor etc. complete.
76 Providing and fixing CPVC Heavy Duty Ball valve of 50mm dia. 6.00 No. 720.13 Rupees Seven Hundred
Twenty And Paise
77 Providing and fixing CPVC Heavy Duty Ball valve of 40mm dia. 6.00 No. 546.41 Rupees Five Hundred
Forty Six And Paise
15 DTP Mamlatdar Office (West) RJT ~ BoQ
78 Providing and fixing CPVC Heavy Duty Ball valve of 25mm dia. 10.00 No. 176.75 Rupees One Hundred
Seventy Six And Paise
Seventy Five Only
79 Providing and fixing Brass chromium plated screws down bib 8.00 No. 186.82 Rupees One Hundred
taps of 15mm dia Eighty Six And Paise
Eighty Two Only
80 Providing and fixing C.P. brass stopcock 15mm dia. 7.00 No. 205.82 Rupees Two Hundred
Five And Paise Eighty
81 Providing erecting and fixing double coated ISI water tank of 24000.00 Ltr. 3.94 Rupees Three And
required capacity each with all necessary fittings and Paise Ninety Four Only
connection etc. complete on terrace.
82 Providing and fixing C.P. brass towel rail 600mm x 20mm size. 9.00 No. 616.42 Rupees Six Hundred
complete with C.P. brass brackets fixed to wooden plugs with Sixteen And Paise Forty
C.P. brass screws. Two Only
83 Providing & fixing stainless steel (stainless steel plate of 304 60.00 No. 882.74 Rupees Eight Hundred
Grade) letter of 25/30 cm. size finished with radium sticker Eighty Two And Paise
including necessary scaffolding for fixing with epoxy material Seventy Four Only
etc. comp. as directed by engineer in charge (Additional Article
of Gujarati letter to be considered as a half letter)
84 Providing & fixing stainless steel (stainless steel plate of 304 40.00 No. 1922.03 Rupees One Thousand
Grade) letter of 40/45 cm. size finished with radium sticker Nine Hundred Twenty
including necessary scaffolding for fixing with epoxy material Two And Paise Three
etc. comp. as directed by engineer in charge (Additional Article Only
of Gujarati letter to be considered as a half letter)
85 Providing and fixing sign board on 4mm thick transparent 13.00 sqm. 4938.90 Rupees Four Thousand
acrylic sheet and letter with sticker sheet including fixing etc. Nine Hundred Thirty
complete. Eight And Paise Ninety
16 DTP Mamlatdar Office (West) RJT ~ BoQ
86 Constructing brick masonry chamber for underground C.I. 14.00 No. 3354.21 Rupees Three
Inspection chamber and bends with bricks having crushing Thousand Three
strength not less than 35 kg./cm2 in C.M. 1:5, C.C. cover with Hundred Fifty Four And
frame having capacity 5.00 MT, with R.C.C. top slab with 1:2:4 Paise Twenty One Only
mix (1-cement :2-coarse sand: 4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc. comp.
Inside dimensions 455mmx 610mm and with required depth for
single pipe line.
87 Applying two coats of putty & two coats of primer of approved 2534.00 sqm. 40.59 Rupees Forty And
brand and manufacture on new wall surface to give an even Paise Fifty Nine Only
shade including thoroughly brushing the surface free from
mortar dropping and other foreign matter and sand papered
88 Wall painting (three coats) with plastic emulsion paint of 6505.10 sqm. 125.82 Rupees One Hundred
approved brand and manufacture on undecorated wall surface Twenty Five And Paise
to give an even shade including throughly brushing the surface Eighty Two Only
free from mortar droppings and other foreign matter and sand
papered smooth.
89 Finishing Wall with Weather Proof Exterior Emulsion Paint on 2943.00 sqm. 122.13 Rupees One Hundred
Wall Surface (Two Coats) to give an required shape even Twenty Two And Paise
shade after thoroughly brushing the surface to remove all dirt, Thirteen Only
and remains of loose powdered materials etc. complete
90 Painting two coats (excluding priming coat) on new steel and 205.00 sqm. 96.77 Rupees Ninety Six And
other metal surface with enamel paint, brushing, interior to give Paise Seventy Seven
an even shade including cleaning the surface an even shade Only
including cleanicn the surface of all dirt, dust and other foreign
17 DTP Mamlatdar Office (West) RJT ~ BoQ
91 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having 123.00 sqm. 1674.14 Rupees One Thousand
Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength
The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non- Six Hundred Seventy
combustible as per B.S. 476 part IV, 100% humidity resistance and also having Four And Paise
thermal conductivity0.043° w/m KC. for the best thermal Insulation. The Light weight Fourteen Only
calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos
having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size
595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of
hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both
side) consisting of main ‘T’ runner suitably spaced at joints to get required length and
size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to
centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced
1200mm along spaced between main ‘T’ at 600mm centre to centre to form a grid of
1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of
0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel
to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter
wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)
sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall
screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium
silicate ceiling tiles of approved texture (Fine Fissured / Cosmos / Spintone) in the grid
including, cutting /making opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended
from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with
12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized
steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main
‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester
baked paint, for all heights, as per specifications, drawings and as directed by
engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured
from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)
having area less than 0.36 sqm. The calcium silicate ceiling tiles shall have NRC.
Value of 0.50 NRC (Minimum) for Fine fissured / Spintone / Cosmos and 0.75 NRC for
Globe, light reflection 85%, non-combustible as per B.S. 476 part IV, 100% humidity
resistance and also having thermal conductivity. 0.043° w/m KC for the best thermal
18 DTP Mamlatdar Office (West) RJT ~ BoQ
92 Pro. And fixing single layer water proof gypsum board 12.5 mm 254.00 sqm. 606.94 Rupees Six Hundred
thick sections using water proof board of size 1220 mm x 1830 Six And Paise Ninety
mm x 8.0 mm suspended by GI suspender channel of size 25 Four Only
mm x 3 mm with intermediate channel of size 18 mm x 40 mm
x 0.8 mm at 1220 mm centre to centre ceiling section of size
40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter
channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges
& drops incl. paper tap sand soffit cleat, anchor fastener,
scotch bolt connecting cleat, joining compound top coat on
ceiling incl. making necessary opening for light fitting, diffuser
etc. complete as per detail drawing as directed.
93 Optra Acoustical Wall Panelling:- Providing and supplying Armstrong 57.00 sqm. 5545.91 Rupees Five Thousand
‘Optra Acoustical Wall Panelling’ with square edges made of fibre Five Hundred Forty Five
glass substrate 25mm thick and wrapped on the front side with an And Paise Ninety One
acoustically transparent and classified for Fire reaction Class A as per
ASTM E-84, fabric with an option of colours – Husk, Copper, Sangria,
Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per
the choice of the Architect of size 600X600/1200 mm providing a
minimum sound absorption level of 0.85 NRC to be affixed to wall
using Wall panel impellers supplied by M/s Armstrong Industries India
Pvt. Ltd and construction.
19 DTP Mamlatdar Office (West) RJT ~ BoQ
94 Channelled Woodworks perforated panels:- Providing and Fixing 40.00 sqm. 5807.50 Rupees Five Thousand
Armstrong Channelled Woodworks perforated panels of width Eight Hundred Seven
192mm, thickness of 15mm and length 2400 mm or as required by And Paise Fifty Only
the Architect/ approving engineer, made of a Moisture resistant fibre
board with minimum 595 Kg/M3 density substrate with a laminated
facing as per the approved shade & finish and a melamine balancing
layer on the reverse side. The boards shall have a special perforation
pattern where the visible surface has a “Helmholtz” fluted perforation
of 3mm width and 5mm of visible panel each. The edges of the
panels shall be “tongue-and-grooved” to receive special clips for
installation. The back of the perforated panel shall have sound
absorbing non-woven acoustical fleece having NRC of 0.63. The
panels shall be mounted on special aluminium splines (keel) using
clips provided by Armstrong and approved by the Architect/ Engineer-
in-Charge. Noise reduction co-efficient-NRC certificate and 1 Year
Warranty Certificate needs to be provided by Manufacturer.
95 WOODEN FLOORING:- Providing & fixing 19mm thick, AC-3 grade 109.00 sqm. 2149.28 Rupees Two Thousand
decorative wooden flooring pre-laminated and are tongue and One Hundred Forty
grooved on the ends and sides, approx. size of Plank (1200 to Nine And Paise Twenty
1215mm length) x (195mm width) 19 MM thick having resistance
against pressure, stain, scratches and abrasion, with 6-8% moisture
content. Including the cost of under lay foam, PVC sheet door profile,
skirting and beading around wall surface, including cost of cleaning
out old existing floor and handing over the same to all. complete as
per directions & instructions of Engineer-In- Charge. (Basic rate of
flooring Not less than 1720.00 @ per sqm.)
20 DTP Mamlatdar Office (West) RJT ~ BoQ
96 Executive High Back Chair:- Providing and supplying Revolving 1.00 No. 19884.88 Rupees Nineteen
High Back Chair Ergonomic design. Knee tilt mechanism with Thousand Eight
multi position locking arrangement and arm rest with Hundred Eighty Four
Leatherette finish on top of arm rest. Specially designed anti And Paise Eighty Eight
topple base, gas lift for seat height adjustment. The seat and Only
back should be covered with approved genuine leatherette
upholstery. The cost including loading, unloading and
Transportation Charges etc. from reputed manufacturer, make
and model such as Godrej, HOF (ELDO-H(E)), Stellar, JK or
equivalent As per choice of users department and concern
officers in charge as directed by the Architect/Engineer.
97 High Back Revolving Chair:- Providing and supplying 5.00 No. 9872.75 Rupees Nine Thousand
Revolving High Back Chair. Knee tilt mechanism with multi Eight Hundred Seventy
position locking arrangement and SS finished arm rest with PU Two And Paise Seventy
Pad. Specially Designed Anti topple base, gas lift for seat Five Only
height adjustment. The seat and back should be covered with
approved genuine leatherette upholstery. The cost including
loading, unloading and Transportation Charges etc. from
reputed manufacturer, make and model such as Godrej, HOF
(ECO-1003), Stellar, JK or equivalent As per choice of users
department and Concern officers in charge as directed by the
Architect/Engineer.
21 DTP Mamlatdar Office (West) RJT ~ BoQ
98 CONFERENCE REVOLVING CHAIR :- Providing and 20.00 No. 13357.25 Rupees Thirteen
supplying Revolving medium Back Chair Knee tilt mechanism Thousand Three
with multi position locking arrangement and SS finished arm Hundred Fifty Seven
rest with pad. specially designed anti topple base, gas lift for And Paise Twenty Five
seat height adjustment. The seat and back should be covered Only
with approved leatherette upholstery finish. The cost including
loading, unloading and Transportation Charges etc. from
reputed manufacturer, make and model such as Godrej, HOF
(ELDO-M(E)), Stellar, JK or equivalent. As per choice of users
department and Concern officers in charge as directed by the
Architect/Engineer.
99 LOW BACK REVOLVING CHAIR :- Providing and supplying 10.00 No. 5226.75 Rupees Five Thousand
Revolving Low Back Chair. Knee tilt mechanism with multi Two Hundred Twenty
position locking arrangement and arm rest. Specially designed Six And Paise Seventy
anti topple base, gas lift for seat height adjustment The cost Five Only
including loading, unloading and Transportation Charges etc.
from reputed manufacturer, make and model such as Godrej,
HOF (PRI-7002N), Stellar, JK or equivalent As per choice of
users department and Concern officers in charge as directed
by the Architect/Engineer.
100 CONFERENCE ROOM CHAIR :- Providing and fixing 20.00 No. 8711.25 Rupees Eight
Executive visitor chairs. Made with moulded and contoured Thousand Seven
cushion Seat and back covered with heavy leatherette Hundred Eleven And
upholstery. The frame shall be of cantilever design. The cost Paise Twenty Five Only
including loading, unloading and Transportation Charges etc.
from reputed manufacturer, make and model such as Godrej,
Stellar (RF-827D), HOF, JK or equivalent As per choice of
users department and Concern officers in charge as directed
by the Architect/Engineer.
22 DTP Mamlatdar Office (West) RJT ~ BoQ
101 Semi Executive Visitors' Chair:- Providing and fixing Semi- 4.00 No. 3600.65 Rupees Three
Executive visitor chairs. This chair shall be made with moulded Thousand Six Hundred
and contoured cushion Seat and back covered with Fabric And Paise Sixty Five
upholstery The frame shall be of cantilever design. The cost Only
including loading, unloading and Transportation Charges etc.
from reputed manufacturer, make and model such as Godrej,
HOF, Stellar (RF-52XD), JK or equivalent As per choice of
users department and Concern officers in charge as directed
by the Architect/Engineer.
102 Visitors Chair: Providing and fixing visitor chairs. This chair 14.00 No. 2903.75 Rupees Two Thousand
shall be made with moulded and contoured cushion. Seat and Nine Hundred Three
back covered with rexine/tapestry. The frame shall be of And Paise Seventy Five
powder coted steel tube 18G. The cost including loading, Only
unloading and Transportation Charges etc. from reputed
manufacturer, make and model such as Godrej, HOF, Stellar
(SP-639-D-EX), JK or equivalent As per choice of users
department and Concern officers in charge as directed by the
Architect/Engineer.
103 VISITOR GANG SEATER WITH CUSHION:- Providing & 2.00 No. 11615.00 Rupees Eleven
Supplying Visitor gang seater with Cushion with S.S. 304 of Thousand Six Hundred
size 1765Wx 710Dx 775H, Three seater made from 16 gauge Fifteen Only
pipe frame structure, seat and back from S.S. 18 gauge
perforated sheet with density foam cushion in seat & back both
covered with good quality Rexine, metal arm rest on both side,
with below side with adjustable shoe. As per choice of user
department and E.I.C.
23 DTP Mamlatdar Office (West) RJT ~ BoQ
104 CONFERENCING TABLE:- Providing & Supplying Wooden 17.00 Sqm. 11615.00 Rupees Eleven
Conference/VC Room Table having size :- 650 mm (W) x Thousand Six Hundred
760mm (H). The basic structure of the table shall be made out Fifteen Only
of Aluminium Box Tube having size :- 38mm x 20mm x 1.6mm
Wall thickness. And entire area covered with 8MM plywood IS
310 and top of the table made out by 36MM thickness Plywood
also covered surrounding the table and top with 4MM thickness
teak veneer, Indian teakwood beadings where ever required.
Along with necessary accessories & other fixtures and
fastening, incl. cost of High Gloss PU polishing etc. On the top
of table putting POP-UP BOX {Desk port} each for all 5 Chair
persons and One POP-UP BOX each for two officers.
Approved make & model. Using all the materials of approved
brand & quality. Work shall be done as per detailed drawing &
image and as per directed by the Architect / Engineer in
Charge. (Basic rate of Veneer Not less then Rs. 2500.00/sqm.)
24 DTP Mamlatdar Office (West) RJT ~ BoQ
105 Semi Executive Officer Table: Providing and supplying wooden 1.00 No. 13008.80 Rupees Thirteen
table having size of 1500 MM x 750 MM x 760 MM Height. Thousand Eight And
BASIC STRUCTURE: The basic structure of the table shall be Paise Eighty Only
made out of 18 mm thickness plywood IS 310 with all open
edges covered with Indian teak wood beading. The top shall
be of 36 mm thickness plywood + 1 mm thickness laminate.
DRAWER UNIT: (Size : 600 x 400 x 500 mm) The basic
structure of the drawer unit shall be made out of 18 mm ply. It
will have series of drawers (1 small at top & 3 of equal height
below the same), made out of 12 mm thickness plywood sides,
6 mm thickness plywood at bottom & 18 mm ply front facia &
side supports with sliding telescopic channels. And covered
with all exposed are of the drawer using with Indian teak wood
beading , as per required size shall be fixed between each
drawer FINISHES: The entire table shall be in 1 mm thickness
laminate finish on horizontal & vertical surfaces on all open
external sides. It will be in 1MM thickness balancing laminate
on internal surfaces , including drawers, below the top of table
and back side and side rack also. All the wooden borders /
members shall be in a 2 mm thickness hard high gloss
P.U.COATING. The table shall have all required hardware,
fixture and fastening as per the approved make list & shall be
installed in position. And work shall be done as per drawing
and directed by architect engineer in charge.(Basic rate of
Laminate Not less then 1250.00@sheet)
25 DTP Mamlatdar Office (West) RJT ~ BoQ
106 Side and back storage:- Providing, fixing, installation at site. 7.00 sqm. 8130.50 Rupees Eight
Side and back storage unit 450/500 mm deep made out of Thousand One
18mm thick plywood IS 310 grade and back of the unit is of Hundred Thirty And
8mm ply, unit is provided with vertical and horizontal divisions Paise Fifty Only
as per design with drawers and shutters, lockable with all
hardware like auto hinges, tower bolt, magnetics catcher,
handle and lock of approved quality. The cabinet should be
raised 75/100mm above floor with S.S. legs. Inside 1 MM
thickness balancing laminate finish. Exposed outside surface
finished with 1MM thickness Lamination with standard grade of
approved design and make. All exposed edges finished with
first quality Teakwood beadings to be finished with hard high
gloss PU coating. complete as per drawing and direction of
Architect/ Engineer in charge. (Basic rate of Laminate Not less
then @1250.00/sheet.)
26 DTP Mamlatdar Office (West) RJT ~ BoQ
107 Computer Work Station: Supplying and placing of work 7.00 No. 6969.00 Rupees Six Thousand
Stations (computer Table) consisting 80 mm thk. & 1.2 m high Nine Hundred Sixty
modular partition. Magnetic board, marker board, cable Nine Only
raceway with metal covers, provision to pass cables inside
partition thickness is 80mm for stability and with the inside gap
between. Two tile - approx. 50 mm for higher wire carrying
capacity. Frame Horizontals are made of 1mm thick CRCA
sheets & the verticals are made of Allu. Extrusions of 1.5 mm
thick. All the frames shall be powder coated in colour, as per
instruction of E.I.C., to be inline with the Top trim & end trims.
All the frames shall be fastened together by means of M6
NUTS & BOLTS. including providing PVC key board tray and
Glass Separator of 12mm Glass with Diamond polish and
contoured cutting to be fixed. They shall be designed so that
the same can be attached to form a 2 way, 3 way or a 4 way
configuration. All the Caps viz. end, inline & universal &
raceway caps are made out of Die-cast Aluminium and
finished in epoxy powder coating finish in the same colour.
SIZE 1.35 Mt. x 0.60 Mt. x 0.76 Mt.
108 CENTRE TABLE:- Providing and Arranging Rectangle Centre table 3.00 No. 4065.25 Rupees Four Thousand
made from 37mm x 37 mm Indian teakwood leg and top frame made Sixty Five And Paise
from 37mmx 75mm Indian teakwood having 18 mm thick Ply and Twenty Five Only
4mm thick Veneer with melamine polish and 0.8mm thick balancing
laminate at bottom for shelf made with surrounding Indian teakwood
frame of size 37 mm x 12 mm. The top having 12 mm thick glass with
edge finish to be placed properly in groove made. Surface to be
finished with melamine polish including all materials and labours etc.
complete as per drawing and instruction of engineer-in charge. : size -
27 DTP Mamlatdar Office (West) RJT ~ BoQ
109 CORNER TABLE:- Providing and Arranging Corner table made from 2.00 No. 4065.25 Rupees Four Thousand
37mm x 37 mm Indian teakwood leg and top frame made from 37mm Sixty Five And Paise
x 75mm Indian teakwood having 18 mm thick Ply and 4mm thick Twenty Five Only
Veneer with melamine polish and 0.8mm thick balancing laminate at
bottom for shelf made with surrounding Indian teakwood frame of size
37 mm x 12 mm the top having 12 mm thick glass with edge finish to
be placed properly in groove made. Surface to be finished with
melamine polish Including all materials and labours etc. complete as
per drawing and instruction of engineer-in charge. Size 600mm x
110 Box Type Cupboard: Providing, fixing, installation at site Box 31.00 Sqm. 9292.00 Rupees Nine Thousand
type storage (Wardrobe) unit 450/500 mm deep made out of Two Hundred Ninety
18mm thick plywood IS 310 grade and back of the unit is of Two Only
8mm ply, unit is provided with vertical and horizontal divisions
as per design with drawers and shutters, lockable with all
hardware like auto hinges, tower bolt, magnetics catcher,
handle and lock of approved quality. The cabinet should be
raised 100mm above floor with S S legs. Inside 1 MM
thickness balancing laminate finish. Exposed outside surface
finished with 1MM thick Lamination with standard grade of
approved design and make. All exposed edges finished with
first quality Teakwood beadings to be finished with hard high
gloss PU coating. complete as per drawing and direction of
Architect/ Engineer in charge. (Basic rate of Laminate Not less
then 1250.00@sheet.)
28 DTP Mamlatdar Office (West) RJT ~ BoQ
111 Frame Type Cupboard: Providing and fixing frame type 23.00 Sqm. 6388.25 Rupees Six Thousand
cupboard with frame and shutter of 18mm thick water proof Three Hundred Eighty
plywood with 1.00mm ISI quality 1.0mm lamination for outside Eight And Paise Twenty
of frame and cupboard and 0.80mm thick lamination to inside Five Only
of cupboard including necessary , hydraulic type S.S. hinges
fixtures , fastenings of standard quality S.S. with locking
arrangement etc complete as per detail drawing and as
directed by Engineer-in-charge.
112 VIP T.V. Unit :- Providing and Fixing Wooden VIP T.V. Unit of 1.00 No. 10744.38 Rupees Ten Thousand
size 2.40 x 1.80 mtr with using 18mm thick W.P. plywood in Seven Hundred Forty
sandwiched pattern to make the edges of the unit to be 38mm Four And Paise Thirty
thick with 1.0mm thick imported decorative laminate with two Eight Only
drawers made by 18mm thick W.P. plywood telescopic
channels with 50 x 50mm square S.S. pipe legs with teak
wood batons and with other necessary fixtures and fastening
incl. of melamine polishing work etc. complete as per drawing
/photos and instruction of engineer-in charge.
113 Pantry Cupboard: Providing and fixing cupboard with 18 MM 3.00 Sqm. 11615.00 Rupees Eleven
thick shutter and frame of 24 mm thick waterproof plywood Thousand Six Hundred
with S.S./M. S. powder coated basket one of size 38cm x Fifteen Only
15cm x 20cm and two of size 38 x 15 x 10cm for 3.00 mt. and
part thereof with front 18 mm plywood all plywood faces shall
be laminated with standard quality 1.00 mm thick lamination for
outside and 0.80 mm thick lamination for internal surface with
20 mm thick teak wood beading for edges with high glow PU
coating incl. necessary channels for drawers and remaining
part of two shutter including necessary S.S. hinges and S.S.
fixtures etc complete as per detail drawing and as directed by
Engineer-in-charge.
29 DTP Mamlatdar Office (West) RJT ~ BoQ
114 Open Type Storage Rack: Providing and fixing open type 5.00 No. 4994.45 Rupees Four Thousand
storage rack of size 1800 x 380 x 2130 mm size with 5 Nine Hundred Ninety
compartments 6 Nos. of shelves made of M.S. 0.90 mm thick Four And Paise Forty
sheet with adjustable arrangement and manufactured with Five Only
slotted angle 40 x 40 x 2 mm thick. The rates shall be
assembled with G.I. bolts, nuts and washers all material shall
be with 10 tank anti-rust treated and as directed by Engineer-in-
115 Open Type Storage Rack: Providing and fixing open type 5.00 No. 4065.25 Rupees Four Thousand
storage rack of size 1500 x 380 x 2130 mm size with 5 Sixty Five And Paise
compartments 6 Nos. of shelves made of M.S. 0.90 mm thick Twenty Five Only
sheet with adjustable arrangement and manufactured with
slotted angle 40 x 40 x 2 mm thick. The rates shall be
assembled with G.I. bolts, nuts and washers all material shall
be with 10 tank anti-rust treated and as directed by Engineer-in-
116 Almirah: Supplying and Placing in Position Storewell having an 6.00 No. 12195.75 Rupees Twelve
overall size of 900mm(W) x 450mm (D) x1950 mm (H) having Thousand One
shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door Hundred Ninety Five
thickness of 0.8mm (high yield strength) and all other And Paise Seventy Five
components shall have a thickness of 0.9mm. These Only
components shall be made of CRCA ‘D’ grade high yield
strength as per IS:513. The Store well should have a Mazak
handle and Three way locking mechanism with Shooting Bolts.
It should have a height wise adjustable shelf mounting which
shall have a Uniformly Distributed Load Capacity of max
Kg. It should also have an M10 Screw type Leveller with Hex
plastic base. The finishing shall include Epoxy powder coating
to the thickness of 50 microns (+/- 10). To be Supplied strictly
as per the direction of the Engineer in charge.
30 DTP Mamlatdar Office (West) RJT ~ BoQ
117 M.D.F. sheet:- Providing and fixing 12 mm M.D.F. sheet 6.00 Sqm. 696.90 Rupees Six Hundred
panelling with on wall surface with aluminium pipe of 50 X 20 Ninety Six And Paise
mm for levelling the surface and fixing the MDF sheet above it Ninety Only
with metal screws, including finishing the surface with Plastic
paint etc. complete as per the instruction of Engineer in
charge/ consultant.
118 M.D.F. design sheet:- Providing and fixing 12 mm M.D.F. 3.00 Sqm. 4529.85 Rupees Four Thousand
design sheet panelling with on wall surface with aluminium Five Hundred Twenty
pipe of 50 x 20 mm for levelling the surface and fixing the Nine And Paise Eighty
M.D.F. sheet above it with meta screws, including finishing the Five Only
surface with metal spray colour/ polishing with P.U. coating
etc. complete as per the instruction of Engineer in charge/
119 Logo Work:- Providing and fixing standard Logo using virgin 2.00 No. 9872.75 Rupees Nine Thousand
acrylic or other material like Coloured HDF/ cement sheet /SS Eight Hundred Seventy
plate with CNC work complete as per architect selection , Two And Paise Seventy
letters as per detailed drawings and fixed with approved Five Only
adhesive with necessary fittings and provision shall be made
for conceal LED light as per detail drawing. (logo size will be
approx.. Size - 600 mm dia )
31 DTP Mamlatdar Office (West) RJT ~ BoQ
120 EXECUTIVE ZEBRA ROLLUP BLINDS :- Providing and fixing 22.00 sqm. 4529.85 Rupees Four Thousand
Zebra type roller blinds of the following specifications: The Five Hundred Twenty
drive unit shall be made up of moulded plastic with steel Nine And Paise Eighty
spring support & inserted into the tube and it shall be driven by Five Only
a ball chain pulley with ball chain and can be positioned at right
side or left side of the shade. The shade when lowering and
rising, shall be automatically locked in position upon release of
the ball chain by means of a build-up in friction lock. The end
plug shall be moulded of plastic with a steel location pin. The
plug shall be inserted into the tube end. (Opposite to the driver
unit) the support brackets shall be of coated steel & provided
with covers and used in right hand positions differentiated by
the acceptance of the rectangular drive unit support or round
ladler plug pin. The roller tube shall be of extruded aluminium
with 38MM internal diameter & skin thickness of 1MM & shall
incorporate a key way integral with the tube to accommodate
the spline. The outside diameter shall be 40MM,the bottom rail
shall be stiffening inserted into bottom rod pocket. The material
may be timber, PVC Covered steel tube or VB bottom rail. The
ball chain should be of 2MM diameter cord with 4.5 MM
diameter acetal balls moulded co-axially to it on 6MM pitch to
form an endless ball chain, which is used for raising or
lowering action of the shades. Fabric is 100 % polyester
dimout colours & shade are like basics, rainbow, wood, look,
slope, with 50 %blackout lush. etc. , complete as per
manufacturers specifications, detailed technical specification
and as per EIC/Architect. The Fabric shall be as per selection
from approved make . (Basic Rate 350@ sq.ft)
32 DTP Mamlatdar Office (West) RJT ~ BoQ
121 Rollup Blinds:- Providing and fixing roller blinds of the following 58.00 sqm. 1452.38 Rupees One Thousand
specifications: The drive unit shall be made up of moulded plastic Four Hundred Fifty Two
with steel spring support & inserted into the tube and it shall be driven And Paise Thirty Eight
by a ball chain pulley with ball chain and can be positioned at right
side or left side of the shade. The shade when lowering and rising,
shall be automatically locked in position upon release of the ball chain
by means of a build-up in friction lock. The end plug shall be moulded
of plastic with a steel location pin. The plug shall be inserted into the
tube end. (Opposite to the driver unit) the support brackets shall be of
coated steel & provided with covers and used in right hand positions
differentiated by the acceptance of the rectangular drive unit support
or round ldler plug pin. The roller tube shall be of extruded aluminium
with 38MM internal diameter & skin thickness of 1MM & shall
incorporate a key way integral with the tube to accommodate the
spline. The outside diameter shall be 40MM,the bottom rail shall be
stiffening inserted into bottom rod pocket. The material may be
timber, PVC Covered steel tube or VB bottom rail. The ball chain
should be of 2MM diameter cord with 4.5 MM diameter acetyl balls
moulded co-axially to it on 6MM pitch to form an endless ball chain,
which is used for raising or lowering action of the shades. Fabric is
100 % polyester dim-out colours & shade are like basics, rainbow,
wood, look, slope, with 50 %blackout lush. The fabric shall be as
directed, etc. , complete as per manufacturers specifications, detailed
technical specification and as per EIC/Architect. The Fabric shall be
as per selection from approved make vista.( Basic Rate 150@ sq.ft)
122 PICTURE FRAME :- Providing and Supplying photo concept 8.00 sqm. 2090.70 Rupees Two Thousand
with unique design, shape & decorative wooden frame with Ninety And Paise
polishing having size of 950 x 650 or as directed including Seventy Only
decorative PVC framing of size 50/75 mm and posters are
historical and decorative artwork on the canvas/ EPF materials
. the photo shall be done as per drawing or As per approved
by Architect/Engineer In charge.
33 DTP Mamlatdar Office (West) RJT ~ BoQ
123 Flower vase:- Providing Flower vase made from glass or 2.00 No. 2323.00 Rupees Two Thousand
ceramic material outer side designer with size of 45cm height Three Hundred Twenty
including colourful artificial flowers as approved by Engineer in Three Only
124 Flower vase:- Providing Flower vase made from glass or 4.00 No. 1161.50 Rupees One Thousand
ceramic material outer side designer with size of 15cm height One Hundred Sixty One
and 30 cm. Dia. including colourful artificial flowers as And Paise Fifty Only
approved by Engineer in charge.
125 Flower pot:- Providing Flower pot made from ceramic material 2.00 No. 3716.80 Rupees Three
or decorative brass white metal or equivalent quality assorted Thousand Seven
pots outer side designer with size of 75cm height including Hundred Sixteen And
high quality artificial flowers plants as approved by Engineer in Paise Eighty Only
126 Soap Dispenser: Providing and fixing C P Brass liquid soap 5.00 No. 1528.13 Rupees One Thousand
dispenser of CERA F5002111 or equivalent quality etc. Five Hundred Twenty
complete. Eight And Paise
127 Glass Shelf: Providing and fixing 600mm x 120mm glass shelf 5.00 No. 570.44 Rupees Five Hundred
with C.P. brass bracket and guard rail complete mixed to Seventy And Paise
wooden plug with C.P. brass screws. Forty Four Only
128 Hydraulic Door Closer: Providing & Fixing ISI make Heavy 3.00 No. 1568.53 Rupees One Thousand
Duty Hydraulic Door closer, surface mounted type (grade 3) of Five Hundred Sixty
standard make made of cast aluminium body, 105 degree Eight And Paise Fifty
openable fixed to the door with all necessary fixtures & Three Only
fasteners etc. as per direction of engineer in charge.
34 DTP Mamlatdar Office (West) RJT ~ BoQ
129 Soft Board: Providing and fixing on wall 12mm thick approved 2.00 Sqm. 1800.83 Rupees One Thousand
quality soft board with cotton cloth/fabric of approved make Eight Hundred And
and shade on 12mm thick IS 710 ply 50 mm thk. approved Paise Eighty Three
Glass wool sheet with PVC grip , as approved sample and as Only
directed by EIC. The work shall be measured & paid in Sqm.
for all floors, all level and at all heights including all costs .Only
the clear elevation area of the cloth/fabric shall be measured
and paid. All the work complete as per the detailed drawing
mock-up sample and instruction of Architect/EIC. Basic rate of
cotton cloth /fabric for 54" wide shall be Rs. 200/Rmt.
130 White notice board:- Providing and supplying white Notice 4.00 Sqm. 1509.95 Rupees One Thousand
board of required size made of 8 mm thick ISI quality plywood Five Hundred Nine And
for back and 0.60 mm thick white metal sheet of standard Paise Ninety Five Only
quality fixed on it. The entire board have standard quality
aluminium frame to accommodate the white board .
131 Pedal Dust Bin: Providing and placing in position SS brush 10.00 No. 709.02 Rupees Seven Hundred
finish (5 LTS PEDAL BIN/ STEP BIN) Square Pedal bin 300 Nine And Paise Two
mm dia. x 450 mm ht. Stainless Steel Dustbin as per images Only
and as selected by the EIC. Basic Rate Rs. 600/- No
35 DTP Mamlatdar Office (West) RJT ~ BoQ
132 Compactor: Providing & Fixing Mechanically movable 13.57 cum. 31775.61 Rupees Thirty One
Compactor System with Base frame fabricated from cold Thousand Seven
formed cahnnel & angle sections of 14 Gauge Thick HRC Hundred Seventy Five
material and sections Sizes of 25 x 100 x 25 mm , 25/45 x 100 And Paise Sixty One
x 25/45 mm with guide rails comprises of soild round shaft of Only
30 mm (Bright bar) in ground finish, press fit in to cold formed
'U' channel made from 14G Thick material completely grouted
within the floor with 0 - 0 levelling having required No. of Cast
Iron Wheels of Size : 128 x 28 mm (moving on a pair of rails)
for units of lengths as required. The Driving wheel shall
comprise of a central hub resting on a pair of roller bearings
with 3 insertable arms engaging into the hub. Boltless type
shelves made of 22 SWG C.R.C.A., quality steel made out of
22 SWG mam thick C.R.C.A. Specially designed 'UNI-LOCK',
or individual unit lock mechanism embedded in the hand wheel
ody itself with a central lock to enable locking of the entire
system with one key with stoppers on either ends of the rails to
prevent the Compactor unit from moving away from the rail
including all necessary fixture, fastenres, fittings, labour,
material, machinery etc. complete as selected and direceted
by E.I.C. (Make: KOMPRESS, GODREJ or Equi.)
133 Supplying, installing, testing and commissioning of M.S. "C" 41.00 Rmt. 3744.07 Rupees Three
Class pipe 150mm nominal dia. confirming to IS 1239, with Thousand Seven
specials such as tees, elbows, flanges including cutting, Hundred Forty Four
welding, fixing in underground installation with anti corrosive And Paise Seven Only
wrapping & coating. Brand approved by Engineer in charge.
134 Supplying, installing, testing and commissioning of M.S. "C" 13.00 Rmt. 2903.75 Rupees Two Thousand
Class pipe 100mm nominal dia. confirming to IS 1239, with Nine Hundred Three
specials such as tees, elbows, flanges including cutting, And Paise Seventy Five
welding, fixing in underground installation with anti corrosive Only
wrapping & coating. Brand approved by Engineer in charge.
36 DTP Mamlatdar Office (West) RJT ~ BoQ
135 Supplying, installing, testing and commissioning of M.S. "C" 22.00 Rmt. 3517.83 Rupees Three
Class pipe 150mm nominal dia. confirming to IS 1239, with Thousand Five Hundred
specials such as tees, elbows, flanges including cutting, Seventeen And Paise
welding, fixing in / on walls, ceiling by using suitable supports Eighty Three Only
etc. as per drawing and brand approved by Engineer in
136 Supplying, installing, testing and commissioning of M.S. "C" 208.00 Rmt. 2514.90 Rupees Two Thousand
Class pipe 100 mm nominal dia. confirming to IS 1239, with Five Hundred Fourteen
specials such as tees, elbows, flanges including cutting, And Paise Ninety Only
welding, fixing in / on walls, ceiling by using suitable supports
etc. as per drawing and brand approved by Engineer in
137 Supplying, installing, testing and commissioning of M.S. "C" 2.00 Rmt. 1855.37 Rupees One Thousand
Class pipe 80 mm nominal dia. confirming to IS 1239, with Eight Hundred Fifty Five
specials such as tees, elbows, flanges including cutting, And Paise Thirty Seven
welding, fixing in / on walls, ceiling by using suitable supports Only
etc. as per drawing and brand approved by Engineer in Charge
138 Supplying, installing, testing and commissioning of M.S. "C" 56.00 Rmt. 1588.73 Rupees One Thousand
Class pipe 65 mm nominal dia. confirming to IS 1239, with Five Hundred Eighty
specials such as tees, elbows, flanges including cutting, Eight And Paise
welding, fixing in / on walls, ceiling by using suitable supports Seventy Three Only
etc. as per drawing and brand approved by Engineer in
139 Supplying, installing, testing and commissioning of M.S. "C" 178.00 Rmt. 1260.48 Rupees One Thousand
Class pipe 50 mm nominal dia. confirming to IS 1239, with Two Hundred Sixty And
specials such as tees, elbows, flanges including cutting, Paise Forty Eight Only
welding, fixing in / on walls, ceiling by using suitable supports
etc. as per drawing and brand approved by Engineer in
37 DTP Mamlatdar Office (West) RJT ~ BoQ
140 Supplying, installing, testing and commissioning of M.S. "C" 24.00 Rmt. 1018.08 Rupees One Thousand
Class pipe 40 mm nominal dia. confirming to IS 1239, with Eighteen And Paise
specials such as tees, elbows, flanges including cutting, Eight Only
welding, fixing in / on walls, ceiling by using suitable supports
etc. as per drawing and brand approved by Engineer in
141 Supplying, installing, testing and commissioning of M.S. "C" 459.00 Rmt. 732.25 Rupees Seven Hundred
Class pipe 25 mm nominal dia. confirming to IS 1239, with Thirty Two And Paise
specials such as tees, elbows, flanges including cutting, Twenty Five Only
welding, fixing in / on walls, ceiling by using suitable supports
etc. as per drawing and brand approved by Engineer in
142 Providing, fixing including testing and commissioning 150 mm 3.00 No. 8819.32 Rupees Eight
nominal dia. of flanged type Check Valve / Butterfly Valves of Thousand Eight
cast iron body C.I. seat conforming to class PN 1.6 complete Hundred Nineteen And
with bolts and nuts, rubber insertions etc. as per specification Paise Thirty Two Only
complete as required. (Dual Plate check valve) Brand as
directed by Engineer in charge.
143 Providing, fixing including testing and commissioning 100 mm 3.00 No. 6562.98 Rupees Six Thousand
nominal dia. of flanged type Check Valve / Butterfly Valves of Five Hundred Sixty Two
cast iron body C.I. seat conforming to class PN 1.6 complete And Paise Ninety Eight
with bolts and nuts, rubber insertions etc. as per specification Only
complete as required. (Dual Plate check valve) Brand as
directed by Engineer in charge.
144 Providing, fixing including testing and commissioning 80 mm 3.00 No. 4903.55 Rupees Four Thousand
nominal dia. of flanged type Check Valve / Butterfly Valves of Nine Hundred Three
cast iron body C.I. seat conforming to class PN 1.6 complete And Paise Fifty Five
with bolts and nuts, rubber insertions etc. as per specification Only
complete as required. (Dual Plate check valve) Brand as
directed by Engineer in charge.
38 DTP Mamlatdar Office (West) RJT ~ BoQ
145 Providing, fixing including testing and commissioning 65 mm 6.00 No. 4234.93 Rupees Four Thousand
nominal dia. of flanged type Check Valve / Butterfly Valves of Two Hundred Thirty
cast iron body C.I. seat conforming to class PN 1.6 complete Four And Paise Ninety
with bolts and nuts, rubber insertions etc. as per specification Three Only
complete as required. (Dual Plate check valve) Brand as
directed by Engineer in charge.
146 Providing, fixing including testing and commissioning 50 mm 6.00 No. 3724.88 Rupees Three
nominal dia. of flanged type Check Valve / Butterfly Valves of Thousand Seven
cast iron body C.I. seat conforming to class PN 1.6 complete Hundred Twenty Four
with bolts and nuts, rubber insertions etc. as per specification And Paise Eighty Eight
complete as required. (Dual Plate check valve) Brand as Brand Only
as directed by Engineer in charge.
147 Supplying and fixing approved make 25mm dia. with automatic 4.00 No. 1299.87 Rupees One Thousand
AIR RELEASE VALVE with unions etc. complete. Brand Two Hundred Ninety
approved by Engineer in charge. Nine And Paise Eighty
148 Supplying, installing and commissioning of FIRE BRIGADE 1.00 No. 7085.15 Rupees Seven
INLET connection of 4 way with 4 nos. 63 mm dia. pipe Thousand Eighty Five
manifold and connected to wet riser main. Brand approved by And Paise Fifteen Only
Engineer in charge.
149 Providing & fixing S.S. Fire Hydrant Single Landing Valve with 3.00 No. 4152.11 Rupees Four Thousand
80 mm N.B. flanged inlet, SS spindle controlled 63 mm dia One Hundred Fifty Two
female instantaneous outlet type. SS coupling, blank cap, And Paise Eleven Only
chain, twist release type lug & all accessories Conforming to
IS:5290. Including fixing with anchor fastener and flanged
tapping from wet riser/ yard piping complete as required. Brand
approved by Engineer in charge.
150 Providing & fixing Fire Hose Pipe type-A (as per IS : 636) of 63 3.00 No. 2683.57 Rupees Two Thousand
mm dia, 1 x 15 m length. The hose shall be rated for burst Six Hundred Eighty
pressure of 38 Kg/sqcm. Hose shall be complete with ISI Three And Paise Fifty
marked SS male & female coupling (IS:903) with SS wire Seven Only
binding. Brand approved by Engineer in charge.
39 DTP Mamlatdar Office (West) RJT ~ BoQ
151 Providing and fixing 63 mm dia. instantaneous pattern Branch 3.00 No. 1852.34 Rupees One Thousand
Short S.S. pipe, 20 mm dia. nozzle conforming to IS 903, Eight Hundred Fifty
suitable for inter connection to hose pipe coupling complete as Two And Paise Thirty
required. Brand approved by Engineer in charge. Four Only
152 Providing, fixing and testing of First Aid Hose Reel equipment 3.00 No. 6899.31 Rupees Six Thousand
conforming to IS:884 comprising of hose reel drum, swinging Eight Hundred Ninety
type fixing bracket, 8 mm shut off nozzle and thermoplastic Nine And Paise Thirty
hose of 25 mm dia x 36 mtr. long etc. as per specification One Only
complete as required. Brand approved by Engineer in charge.
153 External yard hose cabinet made of 18 SWG M.S. sheet with 3.00 No. 3194.63 Rupees Three
powder coated finish of 750mm x 600mm x 250mm in size and Thousand One
mounted on structural support. Brand approved by Engineer in Hundred Ninety Four
charge. And Paise Sixty Three
154 Safety Signage- Night Glow Type: SITC of: Single Side 30.00 No. 345.42 Rupees Three Hundred
Printed Night Glow / Autoglow (Glow in Dark ) Safety Forty Five And Paise
Signage, MMD Certified IMO Signs. Printed on PVC sticker Forty Two Only
sheet and pasted on 3-5 mm thick PVC foam sheet. Make :
Autoglo, Prolite, Glowlite. Size: 200X200 MM. (8" X 8").
155 Safety Signage- Night Glow Type: SITC of: Single Side 30.00 No. 447.43 Rupees Four Hundred
Printed Night Glow / Autoglow (Glow in Dark ) Safety Forty Seven And Paise
Signage, MMD Certified IMO Signs. Printed on PVC sticker Forty Three Only
sheet and pasted on 3-5 mm thick PVC foam sheet. Make :
Autoglo, Prolite, Glowlite. Size: 150X300 MM. (6" X 12")
156 Safety Signage- Night Glow Type: SITC of: Single Side Printed 30.00 No. 230.28 Rupees Two Hundred
Night Glow / Autoglow (Glow in Dark ) Safety Signage, MMD Thirty And Paise
Certified IMO Signs. Printed on PVC sticker sheet and pasted on 3- Twenty Eight Only
5 mm thick PVC foam sheet. Make : Autoglo, Prolite, Glowlite. Size:
40 DTP Mamlatdar Office (West) RJT ~ BoQ
157 Control Valve: Supply, Installation and Testing of: ball Valve (Ball type 3.00 No. 696.90 Rupees Six Hundred
) with necessary pipe fitments, hardware and consumables. (With Ninety Six And Paise
Flange Ends). Standard: ISI Marked. UOM:- Size: - 25mm Ball Valve. Ninety Only
As Per IS Standard. Heavy Quality. Type
158 Providing, fixing, testing & commissioning of 15mm dia 294.00 No. 513.08 Rupees Five Hundred
quartzoid bulb type sprinklers of rating 68 degree centigrade Thirteen And Paise
with required accessories : Pendent Sprinkler. Eight Only
159 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb 15.00 No. 606.00 Rupees Six Hundred
type sprinklers of rating 68 degree centigrade with required Six Only
accessories : Side Wall Sprinkler
160 Supplying, installation, testing & commissioning fire alarm sounder / 3.00 No. 511.06 Rupees Five Hundred
hooter with facility to make announcement, mounted in A.B.S. box Eleven And Paise Six
with hinged cover plate & suitable for operation with amplifier i/c line Only
matching transformer etc. complete as required.
161 Supplying, installation, testing & commissioning of manual call 3.00 No. 511.06 Rupees Five Hundred
box / point of ABS type in surface/recess with stainless steel Eleven And Paise Six
chain & hammer assembly complete with glass and push Only
button etc. as required.
162 Supply, Installation and Testing of: Foot Valve (Ball type or 1.00 No. 20186.87 Rupees Twenty
Swing type) with necessary pipe fitments, hardware and Thousand One
consumables. MOC:- Body: Cast Iron (With Flange Ends). Hundred Eighty Six And
Standard: ISI Marked. Size: 150 mm Paise Eighty Seven
163 Supply & Installing ABC Type - 6 kg, Capacity Fire 10.00 No. 2236.14 Rupees Two Thousand
Extinguisher as per IS-13849 (latest) ISI - mark, with Two Hundred Thirty Six
necessary Fittings etc. complete. And Paise Fourteen Only
164 Supply & Installing Gas CO2 Gas Type–4.5 kg. Capacity Fire 10.00 No. 8560.76 Rupees Eight
Extinguisher as per IS-2171 (latest) and ISI - mark, with Thousand Five Hundred
necessary Fittings etc. complete. Sixty And Paise
Seventy Six Only
41 DTP Mamlatdar Office (West) RJT ~ BoQ
165 Making Hole in RCC / Masonry members of any dia. or any 28.00 No. 1469.55 Rupees One Thousand
thickness with core cutting for passing of pipe line without any Four Hundred Sixty
damage to Structural Members including making good the wall Nine And Paise Fifty
etc. complete as directed by E.I.C. Five Only
166 Supplying, Installation, Testing and commissioning of electric 1.00 No. 100261.69 Rupees One Lakh(s)
driven terrace pump suitable for automatic operation and Two Hundred Sixty One
consisting of following, complete in all respects, as required: And Paise Sixty Nine
Horizontal type, multistage, centrifugal, split casing pump of Only
cast iron body & Bronze impellere with stainless steel shaft,
mechanical confirming to IS:
Suitable HP squirell cage induction motor TEFC type suitable
for operation on 415 volts, 3 phase, 50 Hz, AC supply with
IP55 class of protection for enclosure, horiziontal foot mounted
type with Class-'F' insulation, conforming to IS-325 with
required suitable cable.
M.S. fabricated common base plate, coupling, coupling guard,
foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with
anti vibration pads. 900 LPM at 35 M Head.
167 Providing and erecting Mains with 1.1 kV grade FRLS PVC 55.00 Rmt. 128.27 Rupees One Hundred
insulated ISI marked stranded Copper conductor wire in Twenty Eight And Paise
following type of pipe to be erected concealed in /flushed on Twenty Seven Only
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of
following size (A) With medium class Rigid PVC pipe and
accessories (d) 3 wire 2.5 sq. mm
42 DTP Mamlatdar Office (West) RJT ~ BoQ
168 Providing and erecting Mains with 1.1 kV grade FRLS PVC 25.00 Rmt. 251.49 Rupees Two Hundred
insulated ISI marked stranded Copper conductor wire in Fifty One And Paise
following type of pipe to be erected in / on wall / ceiling with 2.5 Forty Nine Only
sq. mm copper conductor FRLS PVC insulated stranded wire
of green colour for earth continuity of following size (A) with
medium class Rigid PVC pipe and accessories (e) 3 wire 6 sq.
169 Providing, Fixing and Commissioning FIRE ALARM Panel: ISI 1.00 No. 7410.37 Rupees Seven
marked with all required fitting, accessories etc. for required Thousand Four
Zone as approved by Engineer-in-Charge. Hundred Ten And Paise
Thirty Seven Only
170 Making all liaisoning work for getting provisional & Final CFO 1.00 No. 40652.50 Rupees Forty Thousand
NOC, such as filling necessary applications, submission of Six Hundred Fifty Two
forms for approval to the municipal authorities, depositing and And Paise Fifty Only
making channels for the necessary fees and other amounts as
required for getting the premises / installations inspected and
approved and all other formalities required till the Fire NOC is
obtained. All the expenses incurred in this regard shall be
borne by the Contractor, except for the payments to be made
for any security deposits and / or statutory fees which shall be
reimbursed on production of original voucher.
TOTAL OF CIVIL WORK…A Rs.
43 DTP Mamlatdar Office (West) RJT ~ BoQ
PART 'B' ELECTRIC WORK:
171 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 68.00 Pt. 582.77 Rupees Five Hundred
(A) 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS Eighty Two And Paise
PVC insulated multi strand copper wires up to 10 mtr length , Seventy Seven Only
in below type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of following type,
erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as
directed. (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete Cat-III
171 Light Point ( Bathroom , Toilet , Washarea ) 15.00 Pt. 291.38 Rupees Two Hundred
(B) Ninety One And Paise
Thirty Eight Only
172 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 40.00 Pt. 809.01 Rupees Eight Hundred
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS Nine And Paise One
PVC insulated multi strand copper wires up to 10 mtr length, in Only
below type of pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator mounted and
accessories with earth continuity of following type erected on
PVC / Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete cat-III
44 DTP Mamlatdar Office (West) RJT ~ BoQ
173 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 8.00 Pt. 1046.36 Rupees One Thousand
(Green) both are of ISI marked 1.1 kV grade FRLS PVC Forty Six And Paise
insulated multi strand copper wires up to 10 mtr length, in Thirty Six Only
below type of pipe erected complete with Modular type switch
& 5 pin Plug erected on PVC / Metallic/Wooden box covered
with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories.
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire
with 2.5 sq.mm ( green) earthing wire from mcb d b board.(f)
with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete cat-III
174 Point wiring for on board Looped Plug with 6A Modular type 21.00 Pt. 309.06 Rupees Three Hundred
switch & 5 pin socket erected on PVC / Metallic/Wooden box, Nine And Paise Six
single mounting base frame covered with textured / Only
metallic/white front plate modules erected on / in wall / ceiling
with following type accessories Cat. III
175 Point wiring for Tissino / Modular secondary light point with 2- 24.00 Pt. 200.99 Rupees Two Hundred
1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI And Paise Ninety Nine
marked 1.1 kV grade FRLS PVC insulated multi strand copper Only
wires, in below type of pipe to be erected complete with earth
continuity and necessary connection with primary light with
accessories erected on Metal / PVC / wooden box covered
with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /
concealed wiring. with necessary Lamp holder / ceiling rose /
H.D.Connector as directed. Note:- Maximum up to 6 mtrs
length, excess will be considered as Mains for Secondary
Point.(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete
45 DTP Mamlatdar Office (West) RJT ~ BoQ
176 Point wiring for Two Way Controlled Light Point with 2-1.5 3.00 Pt. 725.18 Rupees Seven Hundred
sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI Twenty Five And Paise
marked 1.1 kV grade FRLS PVC insulated multi strand copper Eighteen Only
wires erected in below type of pipe with 6A Modular type
switches and following type of accessories erected on PVC /
Metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary batten/angle
holder or ceiling rose or H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
177 Providing following type of Modular Type Accessories mounted 13.00 Ea. 160.59 Rupees One Hundred
(A) with PVC / metallic/Wooden box, single mounting base frame Sixty And Paise Fifty
covered with textured / metallic/white front plate , modules Nine Only
erected with necessary connections as per site situation
directed by Engineer In charge.(8) Computer RJ-45 socket
177 (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III 2.00 Ea. 160.59 Rupees One Hundred
(B) Sixty And Paise Fifty
178 Providing and erecting ISI mark Medium class RIGID PVC 176.00 Mtr. 33.33 Rupees Thirty Three
PIPES of following size complete to be erected on/in wall or And Paise Thirty Three
ceiling erected with necessary PVC fittings & Junction boxes Only
fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed (b) 25 mm
179 Providing & erecting PVC Corrugated Flexible Conduit with 100.00 Mtr. 21.21 Rupees Twenty One
required nos. of coupling, PVC bushes, Check-nuts etc. And Paise Twenty One
complete of following sizes.(2) 25 mm Only
46 DTP Mamlatdar Office (West) RJT ~ BoQ
180 Providing and erecting Mains with 1.1 kV grade FRLS PVC 350.00 Mtr. 104.03 Rupees One Hundred
insulated ISI marked stranded Copper conductor wire in Four And Paise Three
following type of pipe to be erected concealed in /flushed on Only
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of
following size (A) With medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
181 providing and erecting Mains with 1.1 kV grade FRLS PVC 30.00 Mtr. 532.27 Rupees Five Hundred
insulated ISI marked stranded Copper conductor wire in Thirty Two And Paise
following type of pipe to be erected in / on wall / ceiling with 2.5 Twenty Seven Only
sq. mm copper conductor FRLS PVC insulated stranded wire
of green colour for earth continuity of following size (A) with
medium class Rigid PVC pipe and accessories (i) 4 wire
(use earth wire of 4 sq.mm )
182 providing and erecting Mains with ISI marked, 1.5kV grade 12.00 Mtr. 177.76 Rupees One Hundred
electrolyte multi stranded, annealed copper conductor with Seventy Seven And
heat resistant PVC insulated conforms to IS 694, IEC - 227 Paise Seventy Six Only
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and bolts
if required..(g) One wire 16.00 sq. mm
183 Supplying and erecting Flexible PVC insulated multi strand 8.00 Mtr. 58.58 Rupees Fifty Eight And
multi core 1.1 kv grade ISI marked copper wires of following Paise Fifty Eight Only
size to be erected as directed.(e) 1.50 Sq.mm 3 core round
184 Supplying & erecting approved make LAN cable of following 352.00 Mtr. 47.47 Rupees Forty Seven
size in existing pipe as per direction [C] CAT - 6 And Paise Forty Seven
47 DTP Mamlatdar Office (West) RJT ~ BoQ
185 Providing & erecting Switch board for Computer or electric 13.00 Ea 1133.22 Rupees One Thousand
apparatus consisting of following modular type accessories One Hundred Thirty
mounted with PVC / Metallic concealed/open box with single Three And Paise
mounting base frame covered with textured/metallic /white Twenty Two Only
front plate,modules erected with necessary connections as
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
186 Supplying and erecting LED indoor fittings with LEDs of 49.00 Ea. 535.30 Rupees Five Hundred
(A) wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, Thirty Five And Paise
with housing used as a heat sink shall be made of thick sheet Thirty Only
Steel conforming to IS: 513/CRCA/ aluminium die cast powder
coated and high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor more than
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Tube Light with
integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,
conventional 4 feet Cat-lll
186 (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV, 6.00 Ea. 165.64 Rupees One Hundred
(B) IP-20, conventional 1 to 2 feet Cat-lll Sixty Five And Paise
Sixty Four Only
48 DTP Mamlatdar Office (West) RJT ~ BoQ
187 Supplying and erecting LED indoor fittings with LEDs of 49.00 Ea. 589.84 Rupees Five Hundred
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, Eighty Nine And Paise
with housing used as a heat sink shall be made of thick sheet Eighty Four Only
Steel conforming to IS: 513/CRCA/aluminium pressure die cast
powder coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with company
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Square/ Circular
shaped Surface/Recessed Mount Downlight with provision for
spring loaded mounting clips complete.IP20 (iii) 16-20 watts,
Surge-2 kV Cat-lll
49 DTP Mamlatdar Office (West) RJT ~ BoQ
188 Supplying and erecting LED street light / Flood light fittings 8.00 Ea 5581.26 Rupees Five Thousand
with High power White LEDs wattage of 3 Watt and above Five Hundred Eighty
assembled on single MCPCB, efficiency more than 130 lm/w One And Paise Twenty
and corrosion free High pressure die cast aluminum housing Six Only
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Street Light (IP-65),
Surge protection -4KV integral and ,Light must have 440VAC
line supply with over-voltage protection. (iv) 90 - 119 watts Cat-
189 providing and erecting Miniature circuit breaker single pole 8.00 Ea 297.95 Rupees Two Hundred
0.5A to 2A system and having breaking capacity 10 KA to be Ninety Seven And
erected in existing box. confirming to IS 8828/1996 with ISI Paise Ninety Five Only
190 providing and erecting Miniature circuit breaker single pole 6A 24.00 Ea 123.22 Rupees One Hundred
to 25A suitable to operate on 240 V A.C. system and having Twenty Three And
breaking capacity 10 KA to be erected in existing box. Paise Twenty Two Only
confirming to IS 8828/1996 with ISI Mark Cat.III
191 Providing & erecting 415 V MCB Four Pole for Motor & 5.00 Ea 736.29 Rupees Seven Hundred
Inductive Load (C Curve) having 10KA breaking capacity & Thirty Six And Paise
confirms to IS :8828 in existing box having following capacity Twenty Nine Only
(b)40 Amp.cat-III
50 DTP Mamlatdar Office (West) RJT ~ BoQ
192 Providing and erecting Sheet Steel powder coated MCB 2.00 Ea 2913.85 Rupees Two Thousand
distribution board - flush / surface mounted fitted with busbar, Nine Hundred Thirteen
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, And Paise Eighty Five
IEC 61439-1 & 3 without MCB to house appropriate nos. of Only
MCBs.(The DBs should be used of same company of MCB to
be used) suitable for (B) three phase incoming and single
phase horizontal type outgoing Per phase isolation type (PPI)
(b) sheet steel double door (ii)6 way
193 Sheets steel powder coated enclosure suitable for 3.00 Ea 176.75 Rupees One Hundred
incorporating One/Two nos. MCB. Seventy Six And Paise
Seventy Five Only
194 providing and erecting Approved make RCCBs conforming to 6.00 Ea 2458.34 Rupees Two Thousand
IS: 12640 and having sensitivity of 30 mA and Short Circuit Four Hundred Fifty
withstand capacity of 10 KA and suitable for operation on Eight And Paise Thirty
single phase 240 V,50Hz. having characteristic of quick action Four Only
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed (ii) 40Amps. DP Cat. III
195 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI 160.00 Mtr. 151.50 Rupees One Hundred
armoured cable multistrand / Solid Aluminium conductor for Fifty One And Paise
1.1 kV. to be laid on wall with necessary clamps or in existing Fifty Only
trench / pipe of following size of cables (B) 4 core 6 Sq. mm
196 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI 39.00 Mtr. 1235.23 Rupees One Thousand
armoured cable multistrand Copper conductor for 1.1 kV. to Two Hundred Thirty
be laid on wall with necessary clamps or in existing trench / Five And Paise Twenty
pipe at road crossing or floor of following size of cables.(B) 4 Three Only
197 Providing and, fixing heavy duty flange type brass cable gland 16.00 Ea 38.38 Rupees Thirty Eight
with rubber ring for PVC insulated armoured cable complete And Paise Thirty Eight
with out going tails, insulating tape etc for following size of Only
cables..(B) 2 to 4 core 6 Sq. mm
51 DTP Mamlatdar Office (West) RJT ~ BoQ
198 Solder less crimping type Aluminium lugs conforming to IS 32.00 Ea 6.06 Rupees Six And Paise
suitable for cable of following size evenly crimped with high Six Only
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. . (A)
199 Supply, Installation, Testing and Commissioning of suitable 40.00 Ea 2629.03 Rupees Two Thousand
sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Six Hundred Twenty
Current (BLDC) permanent ferrite magnet Motor, class of Nine And Paise Three
insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. Only
canopies, shackle kit with earthing provision, copper winding,
Power factor not < 0.9, Service Value (CMM/W) minimum
6.85, Air delivery minimum 215 CMM, 350 RPM,230v
(tolerance as per IS : 374-2019), THD < 10%, compitible with
electronic regulator unit for Speed Control and all remaining
accessories including safety pin, nut bolts, washers,
temperature rise = 75 °C (Max.), suitable for 140 to
Voltage and rectifier circuit with surge, over current and
overload protection , 50 Hz, Single phase AC Supply, earthing
etc. Complete as required.[ Make shall be approved by
Engineer in Charge] (A) 1200 mm Sweep (48")
200 Supplying and erecting 19 / 20 mm. nominal bore Medium 20.00 Mtr. 108.07 Rupees One Hundred
Class M.S. Pipe down rod erected duly painted for fan Eight And Paise Seven
complete with proper insulation without leakage and earthing. Only
201 Supplying & erecting fan hook box of 10 mm M.S. round bar 40.00 Ea 108.07 Rupees One Hundred
bounded to the RCC bars up to 50mm length each side and Eight And Paise Seven
pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Only
complete erected concealed in Ceiling with necessary
202 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 40.00 Ea 18.18 Rupees Eighteen And
hook or Fan box. Paise Eighteen Only
52 DTP Mamlatdar Office (West) RJT ~ BoQ
203 Supplying & erecting approved make low noise decorative 6.00 Ea 1366.53 Rupees One Thousand
exhaust fan having square frame ABS body with inbuilt lowers Three Hundred Sixty
& square frame. 200mm with 1350RPM Cat.II Six And Paise Fifty
204 Supplying & erecting approved make SMC press moulded 8.00 Ea 297.95 Rupees Two Hundred
composite FRP. loop-in, loop-out approx. 2mm thick box Ninety Seven And
complete with Bakelite connector strip 5way(3P+N+E),DIN rail Paise Ninety Five Only
for mounting mob & hinged doors as per requirement having
locking arrangements with mounting clamp with nuts, bolts &
washers suitable for erection on pole with cable clamps& earth
bolt of following size of box.(D) 140mm x 140mm x 100mm
205 Supplying and erecting B class Galvanized iron pipe having 8.00 Mtr. 215.13 Rupees Two Hundred
smooth finished bore of the pipe on both ends erected nuts Fifteen And Paise
and bolts along the pole / wall shaping the pipe as per site Thirteen Only
requirement. Pipe dia as following..(B) 32 mm dia
206 Supplying & erecting push button type telephone instrument 2.00 Ea 898.90 Rupees Eight Hundred
having speaker phone Caller ID & speaker phone with one Ninety Eight And Paise
touch memory (min.6 nos.)& 99 memories with display system Ninety Only
Single line [[Approved by Competent Authority i.e. not Below
the rank of Executive Engineer ]
53 DTP Mamlatdar Office (West) RJT ~ BoQ
207 SITC of Delegate Unit shall enable delegates to speak and 12.00 Ea 32024.07 Rupees Thirty Two
listen to the proceedings via a loudspeaker or headphones. Thousand Twenty Four
The unit shall include a microphone with a red indicator ring, And Paise Seven Only
which shall illuminate when the microphone is on.
The unit shall include a ‘Possible To Speak’ white LED
indicator, which shall illuminate showing the delegate when it is
possible to switch on the microphone.
To prevent acoustic feedback, the built-in loudspeaker shall be
muted when the microphone is on, and/or the headphones are
Two 3.5 mm stereo headphone sockets (wired for mono) shall
allow two pairs of headphones to be connected, enabling two
delegates to simultaneously use the unit.
The headphone volume level shall be adjustable on the unit for
maximum comfort. It shall also be possible to connect a tape
recorder to one headphone socket, and use the other
headphone socket to listen to the proceedings.
[Approved by Competent Authority i.e. not Below the rank of
Executive Engineer ]
208 SITC of Chairman Unit shall enable the user to function as 1.00 Ea 38726.43 Rupees Thirty Eight
chairman of a conference or meeting. It shall be similar in Thousand Seven
appearance to the Delegate Unit, and shall also include a Hundred Twenty Six
‘chairman priority button.When pressed, the priority button And Paise Forty Three
shall cause all currently active delegate microphones to be Only
temporarily or permanently muted, allowing the chairman to
take control of the meeting.
To prevent acoustic feedback, the built-in loudspeaker shall be
muted when the microphone is on, and/or the headphones are
An optional chime shall be selectable to precede chairman
priority calls. [Approved by Competent Authority i.e. not Below
the rank of Executive Engineer ]
54 DTP Mamlatdar Office (West) RJT ~ BoQ
209 SITC of Control Unit shall have features for managing the 1.00 Ea 95168.26 Rupees Ninety Five
number of active microphones and determining the operating Thousand One
mode, without the need for a central operator, should be Hundred Sixty Eight
available. It shall be possible to control up to 150 delegate And Paise Twenty Six
units and power up to 50 delegate units. Only
It shall be possible to connect external equipment to extend
the system capabilities. There shall be a built-in loudspeaker
and headphone connector to allow the conference to be
monitored by, for example, a stenographer.
[Approved by Competent Authority i.e. not Below the rank of
Executive Engineer ]
210 Supplying and erecting wall mount speaker with rated power of 6.00 Ea 3083.53 Rupees Three
30 watt/power tapping 30/15/7.5 watt available,opening angle Thousand Eighty Three
180 degree H * 77 degree V ,sound pressure level 88 dB And Paise Fifty Three
,frequency response of 70Hz to 20KHz [[Approved by Only
Competent Authority i.e. not Below the rank of Executive
211 SITC of Mixer amplifier, 240W 1.00 Ea 22000.83 Rupees Twenty Two
[Approved by Competent Authority i.e. not Below the rank of Thousand And Paise
Executive Engineer ] Eighty Three Only
212 SITC of EXTENSION CABLE ASSEMBLY - 2MTRS 8.00 Ea 1059.49 Rupees One Thousand
[Approved by Competent Authority i.e. not Below the rank of Fifty Nine And Paise
Executive Engineer ] Forty Nine Only
213 SITC of EXTENSION CABLE ASSEMBLY - 10 MTRS 2.00 Ea 1911.93 Rupees One Thousand
[Approved by Competent Authority i.e. not Below the rank of Nine Hundred Eleven
Executive Engineer ] And Paise Ninety Three
55 DTP Mamlatdar Office (West) RJT ~ BoQ
214 Providing and erecting Inverter based approved make split air- 5.00 Ea 79620.32 Rupees Seventy Nine
conditioning unit consisting of condensing unit with variable Thousand Six Hundred
speed fan motor, inverter type hermetically sealed rotary Twenty And Paise
compressor with accessories etc. duly connected separately Thirty Two Only
erected evaporating unit and blower motor with its accessories
by means of extra supplied proper insulated copper
tubing,drain PVC pipes suitable for ( cost includes Eco Friendly
green gas charging and 15A plug top & Remote Control & MS
Stand) with necessary core cutting.(2)For ISEER Range
(KWH/KWH)(4.0 to 4.49) (C) for 1.7 to 2 ton capacity-
215 Supplying and erecting insulated pair of soft copper tubing 30.00 Rmt 1158.47 Rupees One Thousand
open or concealed including power and control One Hundred Fifty
cable,necessary PVC drain pipes for Split/Cassette AC Eight And Paise Forty
machine up to 4 TR capacity Seven Only
216 Supply and Erecting of Static Stabilizer suitable for following 5.00 Ea 4029.90 Rupees Four Thousand
capacity of A.C Machine the Stabilizer Must have Minimum Twenty Nine And Paise
Technical Specification are Input working Single Phase Ninety Only
Voltage Range Up to 150V-280V.50Hz, Output Voltage Range
Up to 200V-240V,50Hz,Autoreset Facility,LED Display for
Indicating Voltage,Spike/Surge Protection,Time Delay
Facility,Proper Wall Mount Facility with Required Accessries &
on site 3 year Replacement/Repairing Warranty.(2) For 2 Ton
Thermal Overload Protection 15 Amp.
217 S.I.T.C. of Supply , Installation , testing & Commissioning of 3.00 Ea 61461.03 Rupees Sixty One
139 cm ( 55 inches ) 4K Ultra HD Smart LED Google Thousand Four
Operating System : Google TV Work with apply air play , Hundred Sixty One And
google cast , satellite tunner , with HDMI , USB Port , RJ-45 Paise Two Only
LAN Port and Pre Loaded App with AI Sound with Dolby atoms
Sound , wi-fi, bluetooth Processor 4K Generation
56 DTP Mamlatdar Office (West) RJT ~ BoQ
218 Providing and erecting water cooler having storage capacity 1.00 Ea 54515.76 Rupees Fifty Four
80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of Thousand Five Hundred
45˚ C. The outlet temp. of the water should drop by 15˚ C Fifteen And Paise
within a hour, The water cooler should be comprising of Seventy Six Only
hermetically sealed compressor, fan motor, condensing unit,
water tank surrounded by evaporating coil, thermostats, relay
etc. complete with necessary inlet & outlet connection. The
body of water cooler will be made from Stainless Steel. and ISI
219 Supplying & erecting 5 stage single reverse osmosis water 1.00 Ea 15620.66 Rupees Fifteen
purification system with M.S. powder coated frame, prefilter Thousand Six Hundred
housing with 'O' ring presediment filter GAC filter, carbon filter Twenty And Paise Sixty
suitable buster DC pump capacity 80 psi, mention with 40 psi Six Only
inline type post carbon filter auto low & high pressure switches
with following size of storage tank & LPH capacity & erected as
directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank
Supplying, Erecting, Testing & Commissioning the passenger /
stretcher lift having following main features: (A) GENERAL
DESCRIPTION OF LIFTS.[1] GEAR LESS LIFT DRIVE (MRL)
comprising of High Starting torque Lift 3 phase 440 V A. C.
Permanent Magnet Synchronous motor of proper rating with
high efficiency shall be used.[2] Micro processor based / PLC,
ACVVVF, vector control drive with encoder feedback closed
loop system shall be used for lift car and door operation which
shall be full collective selective operation hall call demand
response, UP/DOWN hall stops, Main, Up/ Down Contactor
with overload and phase reversal relay and safety controls.
57 DTP Mamlatdar Office (West) RJT ~ BoQ
[3] Car with M S platform with bracings of adequate size and to
sustain the impact load cabin + passenger with safety factor of
fire for steel and side panels of Stainless steel of sheet of
grade 304 duty. Car ceiling will be S.S. finishes with aesthetic
appearance with LED ceiling lights. Car flooring shall be of s/s
304 chaker plate design suggested of engineer in charge. of
engineer in charge. Car doors shall be of stainless steel grade
304, hairline finish with centre opening / telescopic automatic
doors. Car panel will also be S.S. 304 finished with emergency
stop device, mechanical door safety device, facility of auto/
attended mode. All car panel buttons and all floor switches
must be with brail language as per lift act.
[4] All landing doors must be fire rated for 2 hour shall be fully
automatic centre opening/ telescopic opening made of hairline
finish steel grade of 304 with key holes and infrared curtains
with Unlocking facility from outside [5] Appropriate battery
operated emergency light in the car along with alarm switch
shall be provided. Also, Emergency Light & Fan should start
immediately without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down arrow along
with floor position indicator shall be provided inside the car and
[7] Full height infra red curtain with multiple cross / crossing
light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided
accordingly of passenger capacity with Manual Rescue
Operation ( Manual Cranking Facility).
58 DTP Mamlatdar Office (West) RJT ~ BoQ
[9] Audio visual indication in the lift car showing over loading
shall be provided such that doors kept open till excess load is
removed.[10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep
timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in
[13] Self diagnostics system for operational and safety
parameters shall be provided in control panel.
[14] Mechanical over speed governor with governor calibration
as per actual site parameters and submission of calibration
certificate submission, door key holes in the floor doors,
fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room
and monkey ladder for lift pit should be provided by the lift
agency, along with the other steel structure works, foundations
for the machine etc…
[16] In the hoist way fascia plate shall be provided without any
extra cost, where ever required as / if directed by engineer in
[17] Permanent wiring with necessary safety devices like
RCCB in all circuit, Over Voltage Under Voltage protection and
THD eliminator in circuit for lift machine room and lift well with
proper numbers of light points, with fixtures, exhaust fan and
plug points shall be provided by the agency. Only 3 phase
Power Supply shall be made available by department in lift
machine room. Necessary Earthing as per Lift Act/Rules shall
be arranged by Lift Agency.
59 DTP Mamlatdar Office (West) RJT ~ BoQ
[18] Any civil/ electrical works for additional and alteration in lift
shaft and machine room related to erection of lift shall be
made by lift agency without any extra cost. (granite/marble
fixing around all landing door openings are not in lift agency’s
[19] Agency has to provide all working drawings and
documents and liaison services for obtaining all necessary
permission from lift inspector and other authorities. [20]
acrylic transparent licence/display A4 size holder in lift car
[20A] As per statutory requirement of Govt. Of Gujarat lift &
escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4.carrying out third party lift inspection during/after lift erection
and provide report by third party authorized by concern
licensing authority 5.agency has to provide third party
insurance up to completion of free maintenance period and
submit the document for the same.4.carrying out third party lift
inspection during/after lift erection and provide report by third
party authorized by concern licensing authority 5.agency has
to provide third party insurance up to completion of free
maintenance period and submit the document for the same.
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for
PREMIUM category 1. Advanced control system dual 64 bit
embedded microprocessor with CANBUS Serial
Communication mode including Regenerative power efficient
operation,on site programming facility, Anti nuisance, Pte-
opening, BMS/RMS with necessary online real time monitoring
system having necessary connectivity for remote monitoring &
other suitable supporting hardware & software devices to fulfil
60 DTP Mamlatdar Office (West) RJT ~ BoQ
2. Floor Indication LCD Display with call registration & brail
mark with arrival gong and hall lantern & TFT Screen in the car
with MP3 Voice Announcer.3. CAR Panel should be Scratch
resistive SS Moonrock finish / Hair Line / Honeycomb for car
and all Doors, All landing doors must have fire rating up to
hours and car door must have multi-level crisscross beam door
protection.4. To & fro communication system & wiring (i.e. car
control room & guard room ) and Each elevator are equipped
with remote monitoring system.agency has to provide mobile
app and user id and password for monitoring
61 DTP Mamlatdar Office (West) RJT ~ BoQ
220 15/16 Passengers, Ground plus 2 upper floor with Rated 1.00 Ea 1903349.04 Rupees Nineteen
Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL Lakh(s) Three
SPECIAL FEATURES attached herewith. Prem. Cat. Thousand Three
Hundred Forty Nine
And Paise Four Only
TOTAL OF ELECTRIC WORK…B Rs.
TOTAL OF ELECTRIC + CIVIL WORK Rs.
Rupees in words: Rupees Two Crore Fifty Five Lakh(s) Six Hundred Forty Eight And Paise
Note: An Amount of Rs. 42,000/- (Rupees Forty Two Thousand Only) shall be deducted from first RA Bill
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate
mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
In words In words
Signature of Contractor Deputy Executive Engineer Executive Engineer
Electical R & B Sub-Division Electrical R & B Division
Deputy Executive Engineer Executive Engineer
Construction (R&B) Sub Division City (R&B) Division
62 DTP Mamlatdar Office (West) RJT ~ BoQ
1 All works shall be carried out as per latest PWD Handbook and other specification of Division as directed.
2 All Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site
moisture, weather etc.
3 Bidders are advised to visit the site & make himself / themself aware of the scope & specification of the work to be done & of conditions and other factors bearing
on the execution of the work before on line submission of his / their bids. Once the bid is finalized, under no circumstances arguments for crust deficiency /
additional / altered works will be heard until & unless Engineer in charge deem so. Engineer in charge shall have right to reject & decision of Engineer in charge
shall be final & binding.
4 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction worker's welfare cess Act - 1996 (Labour
& Employment Department Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-05, Notification of Labour & Employment Department Dtd. 03-01-05 and Labour &
Employment Department letter No. CWA / 2004-841-M(3), Dt. 14-12-05).
5 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or Private laboratory approved by Govt. of
Gujarat. Bill for testing charges should be paid by Executive Engineer and computed after deducting the cost of materials to be supplied by the Govt. and shall be
recovered from the contractor's running bill as per Govt., R&B Department No. TNC-1085/(4)/C dtd 20-12-91.
6 For Tender cost more than Rs. 2.50 lacs, 2% (percent) Tax deduction at source shall be made (which includes 1% (one percent) for GST & 1% (one percent) for
CGST) as per Govt. of Gujarat, Finance Deptt.'s Circular No. : GST/1017/ 1097/GST Cell, Dtd. 15/09/2018 & above Circular details to follows.
7 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C
Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/ 24/S dated 05.03.2011 with details specifications and details of
works and amount involved at site at his own cost as directed by Engineer-in-charge.
9 GST will be paid extra as per Govt. Emendment.
10 GST and Income tax will be deducted at source while making payment of bills.
11 An Amount of Rs. 42,000/- (Rupees Forty Two Thousand Only) shall be deducted from first RA Bill
Deputy Executive Engineer Executive Engineer
Electical R & B Sub-Division Electrical R & B Division
Signature of Contractor Deputy Executive Engineer Executive Engineer
Construction (R&B) Sub Division City (R&B) Division
63 DTP Mamlatdar Office (West) RJT ~ BoQ
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
0.0 Nivida No.18 of 20262027.pdf
1.0 Online_Notice Const Mamlatdar West Addnl Floor.pdf
2.0 SBD Mamlatdar Office West RJT.pdf
3.1 Building Circulars Mamlatdar West RJT_opt_compressed.pdf
4.0 BoQ Mamlatdar West RJT.pdf
5.0 Test Sch.pdf
6.0 Ind to Sp.pdf
6.1 Building Specification Booklet.pdf
7.0 Specifiations Mamlatdar West RJT.pdf
8.1 Electric Specifications_opt_1_to_25.pdf
8.2 Electric Specifications_opt_26_to_50.pdf
8.3 Electric Specifications_opt_51_to_90_compressed.pdf
9.0 Mamlatdar Office Extension at Rajkot West Combined Drawings.pdf
9.1 Sample Photographs for Furniture_opt.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .