Construction of New Mini Urban Haat at Siddhpur, Dist.Patan

NAME OF WORK :-CONSTRUCTION OF NEW MINI URBAN HAAT AT SIDDHPUR, DIST. PATAN

Bill of Quantity

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 Rupees Twenty Eight

mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light Thousand Four Hundred

jungle Fifty Five And Paise Nine

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as Rupees Five Hundred

2 3063.00 necessary and disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto all lead. 535.45 Thirty Five And Paise Cum

Forty Five Only

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as Rupees Six Hundred

3 4404.00 necessary and disposing of the excavated stuff as directed.(B) Depth from 3.0 to 6.0 M.and lead upto all lead. 628.18 Twenty Eight And Paise Cum

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as Rupees Six Hundred

4 344.00 necessary and disposing of the excavated stuff as directed.(B) Depth from 6.0 to 9.0 M.and lead upto all lead. 692.93 Ninety Two And Paise Cum

Ninety Three Only

Carting & carriage Loading - unloading of excavated earth up to 15 km to 25 km from out side campus with all lead & lift as Rupees One Hundred

5 2202.00 per Directed Engineer in Charge 135.66 Thirty Five And Paise Cum

Providng & doing dry Rubble soiling works (width shall be taken as area of pcc +150 mm ) ,voids filled with stone chips and

Rupees Nine Hundred

screened with murrum including compaction with mechanical vibratory compactor , sprinkling of water required for

6 140.00 933.24 Thirty Three And Paise cum

compaction ,for substructure & superstructure as per IS:1597 ,part-1 in line and level etc complete. Rate to include all

Twenty Four Only

material ,labour ,tools & tackles,etc ,complete as per Engineer in charge.

Providing and laying controlled cement concrete M.150 for curing complete excluding cost of formwork and reinforcement

Rupees Three Thousand

for reinforced concrete work in Foundations, footings,Base of columns and Mass concrete.

7 231.34 3864.26 Eight Hundred Sixty Four Cum

And Paise Twenty Six Only

Providing and laying in position control cement concrete mix M-300 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, Rupees Five Thousand

8 867.00 finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of 5312.6 Three Hundred Twelve Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as And Paise Sixty Only

specified , excluding reinforcement : (A) Footing

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

9 122.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8184.49 One Hundred Eighty Four Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Forty Nine Only

Column FOR up to Plinth level

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

10 74.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8184.49 One Hundred Eighty Four Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Forty Nine Only

Column FOR Ground Floor

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Two Hundred Twenty

11 57.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8224.69 Cum

Four And Paise Sixty Nine

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Column First Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

12 56.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8264.89 Two Hundred Sixty Four Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Eighty Nine Only

Column for Second Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

13 26.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8305.08 Three Hundred Five And Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Paise Eight Only

Column for Third Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Three Hundred Forty Five

14 4.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8345.28 Cum

And Paise Twenty Eight

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Column for Fourth >loor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Seven Thousand

15 114.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7191.2 One Hundred Ninety One Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work in Plinth Beam . And Paise Twenty Only

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Seven Thousand

16 237.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7212.41 Two Hundred Twelve And Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Paise Forty One Only

Floor beam for Ground Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Seven Thousand

17 79.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7252.15 Two Hundred Fifty Two Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Fifteen Only

Floor beam for First Floor

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Seven Thousand

18 79.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7292.35 Two Hundred Ninety Two Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Thirty Five Only

Floor beam for Second Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Three Hundred Thirty

19 18.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7332.54 Cum

Two And Paise Fifty Four

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Floor beam for Third Floor

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Three Hundred Seventy

20 4.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7372.74 Cum

Two And Paise Seventy

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Floor beam for Fourth Floor

Providing and Laying controlled Cement Concrete M-200 and curing etc. Complete including the cost of form work but Rupees Five Thousand

21 28.00 excluding the cost of reinforcement for R.C.C. work at Ground Floor (c) For Grad Slab 5057.07 Fifty Seven And Paise Cum

Providing and laying Ironized cement concrete Flooring ordinary cement concrete 1:2:4 (1 Cement 2- coarse sand : 4-

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including the cost of Rupees One Thousand

formwork but excluding the cost of reinforsement for R.C.C work in (ii) Slabs having more than 10 cm and upto 13 One Hundred Seventy

cm.thickness Compaction and finishing of cement concrete by trimix process providing extra Labour charges for the trimix Three And Paise Sixty Two

vacume dewatering service process on cement concrete road sutface by using vacuum dewatering pump floater surface Only

vibrator including making groves and rough finish to surface including leveling etc complete.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Four Hundred Fifty Six

23 214.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7456.83 Cum

And Paise Eighty Three

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for at

Ground Floor (c) For Floor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Four Hundred Ninety Six

24 62.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7496.74 Cum

And Paise Seventy Four

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for First

Floor (c) For Floor Slabs

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Five Hundred Thirty Six

25 62.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7536.94 Cum

And Paise Ninety Four

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Second Floor(c) For >loor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Five Hundred Seventy

26 17.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7577.14 Cum

Seven And Paise Fourteen

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding scaffolding work

considering for Third Floor (c) For >loor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Six Hundred Seventeen

27 3.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 7617.33 Cum

And Paise Thirty Three

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Fourth Floor (c) For >loor Slabs

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

28 10.00 7005.36 Five And Paise Thirty Six Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Stair

Case for basement to Ground Floor & GF TO FF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

29 5.00 7045.45 Forty Five And Paise Forty Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Stair

Case for FF TO SF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Seven Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

30 5.00 7085.65 Eighty Five And Paise Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as

Sixty Five Only

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Stair

Case for SF TO TF

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

31 31.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8187.06 One Hundred Eighty Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Seven And Paise Six Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Two Hundred Twenty

32 7.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8227.21 Cum

Seven And Paise Twenty

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Lintel for FIRST FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

33 6.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8267.41 Two Hundred Sixty Seven Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Forty One Only

Lintel for SECOND FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Eight Thousand

34 3.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 8307.61 Three Hundred Seven And Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Paise Sixty One Only

Lintel for THIRD FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Six Thousand

35 3.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 6752.86 Seven Hundred Fifty Two Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Eighty Six Only

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, Rupees Six Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Seven Hundred Ninety

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as Two And Paise Seventy

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for Two Only

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Rupees Six Thousand

37 3.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 6832.92 Eight Hundred Thirty Two Cum

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for And Paise Ninety Two Only

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Six Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

Eight Hundred Seventy

38 3.00 concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as 6873.12 Cum

Three And Paise Twelve

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

39 379.00 8658.07 Six Hundred Fifty Eight Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as

And Paise Seven Only

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for RCC

WALL for GROUND FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Six Hundred Ninety Eight

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as And Paise Twenty Seven

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for RCC Only

WALL for FIRST FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Seven Hundred Thirty

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as Eight And Paise Forty Six

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for RCC Only

WALL for SECOND FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings, Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of Seven Hundred Seventy

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as Eight And Paise Sixty Six

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for RCC Only

WALL for THIRD FLOOR

Providing and laying in position control cement concrete mix M-250 grade for reinforced cement concrete work , using

cement content as per approved design mix including pumping of concrete to site of laying, cost of Centering , shutterings,

Rupees Eight Thousand

finishing, grouting if required , admixture in recommended proposition as per IS:9103 toaccelerated , retard, setting of

43 5.00 8818.86 Eight Hundred Eighteen Cum

concrete, improve workability as per direction of engineer in charge and approved , rates includes all levels , heights as

And Paise Eighty Six Only

specified , excluding reinforcement .rates for centering, shuttering, formwork staging scaffolding work considering for RCC

WALL for FORTH FLOOR

Providing and laying cement concrete 1:3:6 (1- Cement :3- Coarse sand : 6- Graded brick bat aggregate 40mm normal size) Rupees Two Thousand

44 235.00 and curing complete excluding cost of formwork in (A) Foundation and Plinth 2995.62 Nine Hundred Ninety Five Cum

And Paise Sixty Two Only

Cobble stone 60 mm thick ( 150 x 150 mm / 200 x 150 mm): Providing and laying of 60 mm thick (+10 mm) cobble stone

in multi colour (Sand stone) as per approved sample by Architect/Client. Fixing with 25 mm thick cement mortar ( 1: 4) of

thickness on PCC surface as per detailed drawing. The joints of the stone shall be properly and firmly filled using properly

mixed mortar and joints shall be cleaned and well pointed using cement mortar.

Rupees One Thousand

Work Including levelling in proper line and level with using surface vibrator etc complete. including cost of all type of tools,

45 975.00 1499.85 Four Hundred Ninety Nine Sqmt

tackles, all labour, all type of materials, transportation, cleaning of surfaces, if required protecting, for at all level, all depth,

And Paise Eighty Five Only

all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of

Architect/EIC. Sample mock shall be approved from Architect/ Client. Material Test certificate shall be submitted by the

contractor. (Excluding PCC and RCC)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto Rupees Seventy Seven

46 369725.00 >loor two level 77.28 And Paise Twenty Eight Kg.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and Rupees Two Hundred

47 1983.00 consolidating etc. complete. 273.86 Seventy Three And Paise cmt

Eighty Six Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not Rupees One Hundred

48 5815.52 exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 137.47 Thirty Seven And Paise Cum

Forty Seven Only

Filling in plinth with sand under >loors including watering ramming, consolidating and dressing complete Rupees Four Hundred

49 123.00 429.23 Twenty Nine And Paise Cum

Twenty Three Only

Rolling & Watering of earthwork in layers with power roller including filling in depressions which occur during the process. Rupees Twenty Three And

As directed Paise Forty One Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part-II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted with Rupees Ninety One And

5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S Paise Sixty Two Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and Rupees Three Thousand

52 126.00 plinth in Cement Mortar 1:6. (1- Cement : 6 ->ine sand)(B) Conventional Up to plinth Level 3708.98 Seven Hundred Eight And Cum

Paise Ninety Eight Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure Rupees Four Thousand

53 205.00 above plinth level upto >loor two level (B) Conventional 1:6. (1- Cement : 6 ->ine sand) GROUND FLOOR 4004.12 Four And Paise Twelve Cum

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure Rupees Four Thousand

54 90.00 above plinth level upto >loor two level (B) Conventional 1:6. (1- Cement : 6 ->ine sand) FIRST FLOOR 4041.19 Forty One And Paise Cum

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure Rupees Four Thousand

55 69.00 above plinth level upto >loor two level (B) Conventional 1:6. (1- Cement : 6 ->ine sand) SECOND FLOOR 4078.25 Seventy Eight And Paise Cum

Twenty Five Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure Rupees Four Thousand

56 53.00 above plinth level upto >loor two level (B) Conventional 1:6. (1- Cement : 6 ->ine sand) THIRD FLOOR 4115.32 One Hundred Fifteen And Cum

Paise Thirty Two Only

Brickwork using common burnt Clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure

Rupees Four Thousand

above plinth level upto >loor two level (B) Conventional 1:6. (1- Cement : 6 ->ine sand) FOURTH FLOOR

57 10.00 4152.39 One Hundred Fifty Two Cum

And Paise Thirty Nine Only

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement Rupees Six Hundred

58 228.00 mortar 1:5 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional GROUND FLOOR 619.35 Nineteen And Paise Thirty Sqm

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement Rupees Six Hundred

59 127.00 mortar 1:5 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional FIRST FLOOR 625.07 Twenty Five And Paise Sqm

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement Rupees Six Hundred

60 306.00 mortar 1:5 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional SECOND FLOOR 630.8 Thirty And Paise Eighty Sqm

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement Rupees Six Hundred

61 35.00 mortar 1:5 (1- Cement : 5 -coarse sand ) in superstructure above floor two level.(B) Conventional THIRD FLOOR 636.53 Thirty Six And Paise Fifty Sqm

Providing and fixing Chicken mesh jali at the junction of 2 different surfaces of different material component at the time of Rupees Three Hundred

62 505.00 plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc.complete. 368.65 Sixty Eight And Paise Sixty Sqm

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) Rupees One Thousand

on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed Four Hundred Seventy

with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit as approved Two And Paise Ninety One

by architect. Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

Rupees One Thousand

on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed

64 248.00 1546.84 Five Hundred Forty Six sqm

with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade/ dark

And Paise Eighty Four Only

shade as approved by architect.

Providing and laying Vitrified tiles 8 to 10 mm thick , 48'' x 48'' in flooring treads of steps and landing laid on a bed of Rupees One Thousand

65 925.00 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. 1531.81 Five Hundred Thirty One sqm

And Paise Eighty One Only

Providing and laying Antiskid Ceramic tiles of 450mm x600 mm / 600mm X 600 mm 6mm thick in flooring treads of steps Rupees One Thousand

66 33.00 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in 1017.3 Seventeen And Paise Sqm

white cement selected as per attached detail architectural drawing and materal selection list as approved by architect. Thirty Only

Providing and laying coloured glazed tiles of the size 450 mm x 600 mm x 8 mm / 600 mm x 600 mm x 8 mm in skirting, Rupees One Thousand

67 348.00 risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry 1559.09 Five Hundred Fifty Nine Sqm

as approved by architect. And Paise Nine Only

Providing and laying white glazed tiles 300x600 mm 6mm thick in skrting risers of steps and dedo on 10mm thick cement Rupees One Thousand

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry selected as per attached detail architectural One Hundred Twenty

and materal selection list. Seven And Paise Forty

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse sand) / Polymer modified mortar laid and jointed with cement slurry Rupees Two Thousand

and pointing with white cement slurry admixed with pigment / Polymer modified mortar of matching shade including Three Hundred Seventy

rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Work shall complete Five And Paise Fifty Two

includes all type of tools,tackles, all level & Height, labour etc complete as per the detailed drawing and instruction of EIC. Only

Basic rate of Granite : Rs. 150/ Sq.ft

Providing and fixing Sand which type Granite platform including supplying and fixing granite stone 18 mm thick mirror

Rupees Five Thousand Six

polished 1st quality Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah

70 6.00 5663.07 Hundred Sixty Three And Sqm

stone platform fixing in top and sides and itermediates supports fixing with cement mortar and adhesivee and finishing

Paise Seven Only

including cutting for fixing of sink any size (as directed by engineer incharge) at required position etc complete.

Providing and fixing white designer marble inlay work with stone thickness12-16 mm, white double charged polished Rupees Twelve Thousand

etc,metal, brass, sheet etc.Contractor shall submitt Shop drawing for approval of Architect/ EIC before execution. Four Hundred Ninety

Seven And Paise Seventy

Providing and laying 3 to 5 mm thick (250 GSM) polypropylene tile protection bubble sheet to protect the floor against Rupees One Hundred

72 1347.00 services, painting, false ceiling work, piping work. Sheet should be laid property and; Bok) with abrotap. After finishing all 112.11 Twelve And Paise Eleven Sqm

the work, sheet should be removed and clean the surface etc. complete as directed by engineer incharge Only

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal Rupees Three Hundred

73 515.00 size) laid in one layer and >inished with a >loating coat of neat cement. (B) 50mm thick. 355.21 Fifty Five And Paise Sqm

Twenty One Only

All the waterproofing activities shall be carried out by in-house application company of the principal material manufacturer

and provide a written corporate Supply Apply Corporate Warranty from the principal manufacturer that all work executed

will be free from defects in materials, workmanship and free of leaks for a period of 3 years from the date of Work

Completion, unless resulting from structural defects or causes other than the work of this section. Said defects shall be

Rupees Three Hundred

remedied by the principal manufacturer for the period of the warranty without additional cost to the owner for

74 583.00 398.95 Ninety Eight And Paise smt

waterproofing material only. Providing and applying hydrophilic crystalline based waterproofing system In two coat

Ninety Five Only

application.The application to be done from +ve(positive) side on a wet open pore green concrete surface at coverage of

0.8to1kg/sqm as per manufacturer specification.It should be hydrophilic in nature,should be able to grow crystals year after

year to seal microcracks.The product should confirm to DIN1048 part5 and should provide in depth crystallization.The

material and application warranty to be given by manufacturer’s authorized distributor/applicator on prescribed format

for10 years.Note:- Treated area should be screeded using hydrophilic crystalline admixture KIM(Krstol Internal Membrane)

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and mixing water proofing materials in cement mortar in proportion recommended by the manufacturer. Rupees Forty Nine And

Paise Twenty Five Only

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using Rupees Seven Hundred

76 488.00 white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and 779.69 Seventy Nine And Paise Sqm.

oxalic acid etc. as directed. Sixty Nine Only

Providing and laying 16-18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of

door ,window,ventilation & lift wall cladding,staircase flooring landing, risers & treads, skirting laid over 10 mm thick

Rupees Two Thousand

cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry with matching pigment incl. rubbing and

77 727.00 2866.41 Eight Hundred Sixty Six Sqm.

polishing, half rounding edge and incl. fixing of hilty fastener at every 1/3 span of sill as required size etc. complete colour

And Paise Forty One Only

and shed as approved by architect engineer in charge.

Providing and fixing Green Marble stone in18mm thick Stair steps threds and risers over 10mm (Average) thick base of Rupees One Thousand

cement mortar 1:3 (1-cement : 3-coarse sand) laid over and jointed with grey cement slurry including rubbing and polishing Eight Hundred Twenty

etc. complete selected as per attached detail architectural drawing. One And Paise Seventy

Providing and laying 19mm x 25mm round ,'D' edge and polished granite pencil patti on top, with cement paste and Rupees Three Hundred

79 150.00 including backing coat in C.M. 1:4. All joints filled with colour / epoxy grout and wiped to give sharp joints with flush 300.98 And Paise Ninety Eight Mtr

pointing and washed clean with acid etc. Only

Providing and fixing main door 50mm.th. double shutter specially designed hollow door made out of 7.5x5 cm.t.w. frame

Rupees Seven Thousand

work with 6mm.th. waterproof ply and lamination over it, on both the sides, colour pattern and design of which is to be

Five Hundred Thirty Eight

80 6.00 approved by the architect. doors shall be provided with pivot and 60 cm. long stainless steel handles as/detail. as per 7538.27 Sqm.

And Paise Twenty Seven

attached detail architectural drawing.

Providing and fixing Single/double shuttered door having black granite frame with all open edges machine cut & machine

polished, fixed by special hinges with double shutter of 35 mm th both side pre laminated md flushed door, from "greenply" Rupees Five Thousand

81 5.00 or equivalent company. as per attached detail architectural drawing. 5409.39 Four Hundred Nine And Sqmt

Paise Thirty Nine Only

Providing and fixing FRP of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in

depressed panel design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be

filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & Rupees One Thousand

82 30.00 also taking hinges & fintures. The whole FRP frame & shutter is to be water proof ,weather proof, termite proof & resistance 1269.63 Two Hundred Sixty Nine Sqmt

to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium fixtures & fastenings. And Paise Sixty Three Only

approved by the architect.

Providing and Fixing heavy duty S.S. Door Closer as directed by Engineer In charge. Rupees Nine Hundred

83 25.00 943.34 Forty Three And Paise Each

Thirty Four Only

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked together through their

Rupees Four Thousand

entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates,

84 183.00 4546.01 Five Hundred Forty Six Sqmt

guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover

And Paise One Only

and spring etc. complete.(A) Shutters having width Above 3.5 M.

Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat of primer and two coat oil paint as Rupees One Hundred

85 1570.00 per details given by architect instructions given by engineer in charge 186.85 Eighty Six And Paise Kg.

Eighty Five Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and fixing Three Track Domal window having extruded aluminum Colour anodized 60 micron Sliding section

outer frame size 80 mm x 45 mm weight 1.555 kg/m (Jindal Section code : 21376) and shutter frame 27 mm x 65 mm

Rupees Five Thousand

weight 0.851 kg/m (Jindal Section code : 21490) and Section inner patti size 38.70 mm x 28.50 mm weight 0.303 kg/m

Eight Hundred Seventy

86 68.00 (Jindal Section code 19453) , mosquito jali channel - 9 mm x 15 mm x1.20 mmx1.20 mm weight .118 kg/m (jindal section 5874.16 Sqmt

Four And Paise Sixteen

code 15784 ) with 5 mm clear Frosted Glass (Modi or Saint Gobain) and including all accesible accesories complete etc. or

as directed Engineer in charge.

Providing and fixing Two Track Domal window having extruded aluminum Colour anodized Sliding section outer frame size

Rupees Five Thousand

45mm x 45 mm weight 1.004 kg/m and shutter frame 27 mm x 65 mm weight 0.851 kg/m and Section inner patti size

Three Hundred Seventy

87 23.00 38.70 mm x 28.50 mm weight 0.303 kg/m with mosquito jali channel - 9 mm x 15 mm x1.20 mmx1.20 mm weight .118 5374.21 Sqmt

Four And Paise Twenty

kg/m (jindal section code 15784 ) with 5 mm clear glass (Modi or Saint Gobain) including all accesible accesories complete

Providing and fixing standared extruded of domal alluminium section of size 50 mm x 25 mm x 1.2mm (Jindal or

Rupees Two Thousand

equivalent) with colour anodized 60 micron alluminium frame for ventilation with 5 mm thick frosted glass as details etc

88 8.00 2186.65 One Hundred Eighty Six Sqmt

complete for Ventilation

And Paise Sixty Five Only

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two Rupees Two Hundred

89 2685.00 level and finished even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) Ground Floor 208.41 Eight And Paise Forty One Sqm

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two Rupees Two Hundred

90 617.00 level and finished even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) First Floor 233.44 Thirty Three And Paise Sqm

Forty Four Only

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two Rupees Two Hundred

91 617.00 level and finished even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) Second Floor 258.46 Fifty Eight And Paise Forty Sqm

Providing 10mm thick cement mala plaster in double coat on brick/concrete walls for interior plastering upto floor two Rupees Two Hundred

92 199.00 level and finished even and smooth in (i)Cement mortar 1:4 (1-cement:4-sand) Third Floor 283.49 Eighty Three And Paise Sqm

Forty Nine Only

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior Rupees Two Hundred

93 1246.00 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) Ground floor 221.89 Twenty One And Paise Sqm

Eighty Nine Only

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior Rupees Two Hundred

94 765.00 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) First floor 251.99 Fifty One And Paise Ninety Sqm

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior Rupees Two Hundred

95 1229.00 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) Second floor 257.06 Fifty Seven And Paise Six Sqm

Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for interior Rupees Two Hundred

96 389.00 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-sand) Third floor 262.13 Sixty Two And Paise Sqm

Providing cement vata (10 mm. x 10 mm. size) quarter round in cement mortar 1:1 including neat cement finishing,

Rupees Twenty Four And

97 149.00 watering etc. complete. 24.28 Rmt

Paise Twenty Eight Only

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base

Rupees Two Hundred

coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

98 2774.00 290.71 Ninety And Paise Seventy Sqmt

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick

/ concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a Rupees Two Hundred

99 1058.00 flooting coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after 284.82 Eighty Four And Paise Sqmt

handing over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to Eighty Two Only

be furnished before receiving any payment from the client.

Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture, Coral texture or equivalent

Rupees Four Hundred

make incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing

100 1860.00 443.39 Forty Three And Paise Sqmt

base coat of 20 mm thick smooth mala plaster etc. Complete Exterior weather proof two coat paint in any shade as

Thirty Nine Only

approved by Architect/ Engineer in charge for all floor all height.

Providing and laying 20mm thick stone stonecrete in laid over 20mm thick cement mortar 1: 3 (1 cement: 3 coarse sand) Rupees One Thousand

and jointed with grey cement slurry with matching pigment in flooring complete as approved by architect engineer in Nine Hundred Thirty

charge. Seven And Paise Eighteen

Providing and filling cinder inlcuding watering and consolidation etc complete. Rupees Four Hundred

102 26.00 464.6 Sixty Four And Paise Sixty Cum

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered Rupees Forty And Paise

smooth. Fifty Nine Only

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand Rupees Eighty Eight And

papered smooth and colour approved by architect. Paise Thirty Eight Only

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated Ceiling surface

to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and Rupees Ninety Four And

sand papered smooth and colour approved by architect. Paise Seventeen Only

Finishing wall with weather proof exterior acrylic emulsion paint on wall surface (two coats) to give an required shape even

Rupees One Hundred

shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete olour

106 615.00 122.13 Twenty Two And Paise Sqm.

and shade approved by architecture.

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per

Indian Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS railing (Only Length Rupees Three Thousand

will be paid for payment heigth max.1.0 mt.). The Work to be executed as per consultant drawing . 50mm dia.(16 gauge) One Hundred Seventy

TOP RAIL ,32 mm dia.(16 gauge) VERTICAL SUPPORT ,16 mm dia.(16 gauge) HORI. MEMBER ,100mm dia. x 8mm size plate Three And Paise Forty

Providing and fixing in position S.S. daso by providing top 50 mm dia stain less steel pipe rail with starting and end point Rupees One Thousand

vertical post of 50 mm dia with wall/column including bending welding and fixing for staircase and balcony as directed. Seven Hundred Ninety

(testing is required of s.s 304) for all floor Four And Paise Seventy

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

Rupees Seventy Two And

109 150.00 concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive 72.64 Rmt.

Paise Sixty Four Only

solvent, including cost of all materials.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

Rupees Ninety One And

110 240.00 concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive 91.83 Rmt.

Paise Eighty Three Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred

111 300.00 concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive 148.11 Forty Eight And Paise Rmt.

solvent, including cost of all materials. Eleven Only

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred

112 250.00 concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive 195.66 Ninety Five And Paise Rmt.

solvent, including cost of all materials. Sixty Six Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Rupees One Hundred

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

113 125.00 170.35 Seventy And Paise Thirty Rmt.

wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Rupees Two Hundred

114 150.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps 208.79 Eight And Paise Seventy Rmt.

including making good the wall, ceiling and floor etc. complete. [B] 20 mm. Nine Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Rupees Two Hundred

115 150.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps 253.82 Fifty Three And Paise Rmt.

including making good the wall, ceiling and floor etc. complete. [B] 25 mm. Eighty Two Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Rupees Four Hundred

116 325.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps 447.72 Forty Seven And Paise Rmt.

including making good the wall, ceiling and floor etc. complete. [B] 40 mm. Seventy Two Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Rupees Six Hundred Sixty

117 225.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps 660.58 Rmt.

And Paise Fifty Eight Only

including making good the wall, ceiling and floor etc. complete. [B] 50 mm.

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Rupees Four Hundred

118 6.00 420.63 Twenty And Paise Sixty No.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Rupees Six Hundred Sixty

119 10.00 663.42 Three And Paise Forty No.

Providing and fixing Butterfly valves IS 13095 with ISI mark PN 1.6 of aprroved brand & follwing internal dia including Rupees One Thousand Six

120 6.00 fixing in pipe lines etc.complete (A) 50 mm Dia 1675.59 Hundred Seventy Five And No.

Paise Fifty Nine Only

Providing and fixing special type clamping system made out from C patti, Z patti, L Clamp , U clamp with Nut/ Bolt and

washer as suitable arrangement for water supply and plumbing system like Drainage Line , Rain Water line and supply line

Rupees One Hundred Sixty

121 50.00 for Hot and Cold water etc line fitting from GF to 2nd Floor required as per site condition for fixing etc complete. 15 to 160.59 Nos.

And Paise Fifty Nine Only

50 to 65mm dia pipe Rupees One Hundred

122 50.00 187.86 Eighty Seven And Paise Nos.

Eighty Six Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

75 to 110mm dia pipe Rupees Two Hundred

123 100.00 220.18 Twenty And Paise Nos.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia.

Rupees Two Hundred

Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling

124 140.00 280.23 Eighty And Paise Twenty Rmt.

and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia.

Rupees Three Hundred

Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling

125 200.00 338.35 Thirty Eight And Paise Rmt.

and floor.(F) 110mm

Thirty Five Only

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp Rupees Nine Hundred

126 186.00 of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in 918.66 Eighteen And Paise Sixty Rmt.

walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with Six Only

adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp Rupees Eight Hundred

127 230.00 of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in 834.38 Thirty Four And Paise Rmt.

walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with Thirty Eight Only

adhesive solvent cement including cost of all materials.

Providing and fixing ECO Drain Pipes in including supporting the ECO Drain pipe on the bricks at each joint including Rupees Five Hundred

128 30.00 leakproof joints ECO Drain Pipe etc., complete 580.75 Eighty And Paise Seventy Rmt.

200mm dia. Five Only

Providing and fixing ECO Drain PVC Pipes in including supporting the ECO Drain pipe on the bricks at each joint including

Rupees One Thousand

leakproof joints ECO Drain Pipe etc., complete

129 50.00 1370.57 Three Hundred Seventy Rmt

300 mm dia.pipe

And Paise Fifty Seven Only

Providing and fixing PVC /SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter

Rupees Six Hundred One

of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

130 34.00 601.93 And Paise Ninety Three No.

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. Rupees One Hundred

131 20.00 186.82 Eighty Six And Paise No.

Eighty Two Only

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. Rupees Three Hundred

132 14.00 308.72 Eight And Paise Seventy Nos.

Providing and fixing table top wash basin on 18mm thick black shade polished granite for top with 2 Nos. of C.I. Heavy

brecket with 1 Nos. of wash basin Jaquar brand or equivalent, C.P. brass Jaquar pillar cock or equivalent, angle valve or Rupees Thirteen

equivalent, C.P. brass extension nipple 62mm long, S.S. flange water super connection pipe 60cm. long and full thread waste Thousand One Hundred

coupling includingm, bottle trap making hole in granite for wash basin etc. complete. Table Top Wash Basin (jaquar - KUS- Twenty Three And Paise

WHT-35901) , Piller Cock (jaquar - FLR-5007B) , Angle Valve (jaquar - FLR-5053N) Ninety Four Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and fixing wash down wall hung water closet(European type) of jaquar or equivalent with integral 'P' trap

jointed within C.I pipe in C:M 1:1 including matching seat cover, chair braket, Conceled metropole of jaquar or equivalent, 2 Rupees Seventeen

way bibcock of jaquar or equivalent, health foucet of jaquar or equivalent with 1 m extension pipe, toilet paper holder of Thousand Eight Hundred

jaquar or equivalent with all accessories etc. complete. Wall Hung Water Closet (jaquar - SLS-WHT-6953BIPPSM) Thirty Seven And Paise

,Metropole (jaquar - FLV-1093N) ,2 Way Bib Cock (jaquar - FLR-5041N) ,Health Faucet (jaquar - ALD-573) ,Toilet Paper Sixty One Only

Holder (jaquare - ACN-1151N)

Providing and fixing urinals of jaquar or equivalent with integral drain pipe jointed within C.I pipe in C:M 1:1, Conceled cock, Rupees Eight Thousand

135 8.00 all accessories etc. complete. (jaquar - URS-WHT-13255) , Urinal Flush Valve Jaquar PRS-073 8909.21 Nine Hundred Nine And No.

Paise Twenty One Only

Providing and fixingWomal urinals of Cera or equivalent with integral drain pipe jointed within C.I pipe in C:M 1:1, Conceled Rupees Two Thousand Six

cock, all accessories etc. complete. (Cera Calina S3010102 )size -580 mm x 440 mm Hundred Twenty Four

And Paise Ninety Nine

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height (Model R 1100 -Commander or equivalent) Rupees Twenty Six

for handicap toilet complete as recommended by the etc completed as directed/ approved by engineer In charge or Thousand Five Hundred

Architect. Seventy Seven And Paise

Providing and fixing raised toilet seat with cover for handicap toilet (Model R-35: Presalit – Commander or equivalent) as Rupees Twenty Four

recommended by the etc completed as directed/ approved by engineer In charge or Architect. Thousand Six Hundred

Seven And Paise Sixty

Providing and fixing brackets, tracks (Model R4140) with flexible feed & waste pipes for adjustable type wash basin Rupees Forty Three

complete as recommended, for handicap toilet (Make : Presalit – Commander or equivalent)etc completed as directed / Thousand Five Hundred

approved by engineer In charge or Architect. Six And Paise Seventy Six

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and

Rupees Three And Paise

140 34000.00 connection etc. complete on terrace 3.94 Lit

Ninety Four Only

Providing and fixing bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing Rupees Two Thousand

to wooden pluge with C.P. brass screws and washers as per approved by Architect or Engineer in charges Three Hundred Seventy

Five And Paise Fifty Two

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) Rupees Six Hundred

142 8.00 600mm x 20mm size. 616.42 Sixteen And Paise Forty No.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Rupees Two Hundred Five

And Paise Eighty Two Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with Rupees Three Thousand

144 8.00 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm 3660.75 Six Hundred Sixty And No.

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. Paise Seventy Five Only

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Providing and fixing in position cowel went to pipes.(B) 75mm dia. Rupees Three Hundred

145 10.00 393.04 Ninety Three And Paise No.

Providing and fixing in position cowel went to pipes.(C) 100mm dia Rupees Five Hundred Five

And Paise Seventeen Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size finished with radium sticker

Rupees Two Thousand

including necessary scaffolding for fixing with epoxy material etc. comp. as directed by engineer in charge (Additional

147 30.00 2027.97 Twenty Seven And Paise No.

Article of Gujarati letter are consider as a half letter)

Ninety Seven Only

Providing and constructing SOAK WELL of 3.50 m internal dia and 8 .00 depth depth internal clear dimention including the

cost of execavation,PCC 1:4:8 foundation for honey combed masonary in C.M. 1:4 (1cement : 4 sand) , casting R.C.C. 1:2:4

Rupees Sixty Nine

(1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) top slab 12 thick with C.I. manhole cover 600mm x

148 1.00 69058.75 Thousand Fifty Eight And Nos.

450mm size of 35 kg. weight and 75mm dia C.I. pipe 1800mm long with 75mm dia cowel vent and filling the wall 1000mm

Paise Seventy Five Only

in depth with dry brick bats including providing vata in C.M. 1:3 (1cement : 3 sand), curing including cost of reinforcement

etc. complete as per detailed drawing and directed by E.I.C.

Construction Septic tank inside dimention of 4.00 m in length & 2.50 m in width & 2.00 m depth including excavating any

type of soil as shown and mentioned in the drawing,providing and laying 0.10 m thick plain cement concrete 1:3:6 (

cement : 3 coarse sand : 6 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary 0.23 m thick walls Rupees Seventy One

CM 1:5 ( 1 cement : 5 coarse sand ) and intermediate partition CM 1:4 & RCC Top slabs12 cms thick in 1:2:4 (1 cement : 2 Thousand Three Hundred

coarse sand : 4 graded stone agg) including reinforcement as per design and 15 mm thick cement plaster in CM 1:4 with Fourteen And Paise Eight

floating coat of neat cement slurry inside, top and around tank below 15 cm on ground level, Also provide Two nos CI Only

Manhole frame and cover of size 60 cm x 45 cm & 75 mm dia. PVC 10 kgf / Sq cm pressure air vent pipe in 3.00 length with

cowl etc complete as per direction of Engineer in charge.

Providing and fixing C.I Manhole cover 0.60 mt x 0.45 mt size having weight not less than 35 Kg Rupees Nine Hundred

150 3.00 958.16 Fifty Eight And Paise Nos.

Providing & Fixing iron steps of size 500mm x 150mm x 22.5 mm and painting with two coats of anticorrosive paint etc. Rupees Two Hundred

151 15.00 complete. 207.65 Seven And Paise Sixty Five Each

Providing & fixing Steel work welded, in built up sections framed work including cutting, hoisting, fixing in position and Rupees One Hundred

152 6746.00 with one coat primer & two coat oil paint as per detail drawings etc. complete. in columns, beams and joists, channels M.S. 131.82 Thirty One And Paise Kg.

flat, Angles, Pipes, tees flats with connecting plates or angle cleats STRUCTURAL STEEL Eighty Two Only

Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcemenT bars as Rupees Ten And Paise

per IS-13620-1993/ASTM-775 M including testing of coating at plant Sixteen Only

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of Rupees One Hundred

154 15.00 taking out service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 50 192.02 Ninety Two And Paise Each

mm dia Two Only

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of Rupees Two Hundred

155 15.00 taking out service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 75 280.23 Eighty And Paise Twenty Each

mm dia Three Only

Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 10 Kg/cm2 UPVC Pipes and diameter of Rupees Three Hundred

156 15.00 taking out service pipelines cables road infrasturcture work etc. upto 1 mtr. length for all floors/ all levels / all heights. 110 339.04 Thirty Nine And Paise Each

mm dia Four Only

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling

the hole of required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY

of Hilti or approved equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects Rupees One Hundred Four

instruction.The work shall be carried out by the technical workmens/ agency approved by the manufacturer and under And Paise Three Only

technical supervision of Manufacturer of Injection grout including all materials, tool tackles, labour etc.complete. (a) 8 mm.

dia.bar -Holes 12mm dia Depth 100mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling

the hole of required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY

Rupees One Hundred

of Hilti or approved equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects

158 200.00 135.34 Thirty Five And Paise Each

instruction.The work shall be carried out by the technical workmens/ agency approved by the manufacturer and under

Thirty Four Only

technical supervision of Manufacturer of Injection grout including all materials, tool tackles, labour etc.complete. (B) 10 mm.

dia.bar -Holes 14mm dia Depth 100mm

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling

the hole of required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY

Rupees One Hundred Sixty

of Hilti or approved equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects

159 300.00 167.66 Seven And Paise Sixty Six Each

instruction.The work shall be carried out by the technical workmens/ agency approved by the manufacturer and under

technical supervision of Manufacturer of Injection grout including all materials, tool tackles, labour etc.complete.(C) 12 mm.

dia.bar -Holes 14mm dia Depth 120mm

Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under relevant item of work) after drilling

the hole of required diameter & depth ,cleanning of the same ,providing/ filling the hole with Injection Mortar (HIT HY

Rupees Two Hundred

of Hilti or approved equivalant), inserting reinforcement bar etc. complete as per Manufacturers & architects

160 300.00 215.13 Fifteen And Paise Thirteen Each

instruction.The work shall be carried out by the technical workmens/ agency approved by the manufacturer and under

technical supervision of Manufacturer of Injection grout including all materials, tool tackles, labour etc.complete. (D) 16 mm.

dia.bar -Holes 20mm dia Depth 160mm

GRC WORK : Providing & fixing architectural moldings profiles and other decorative elements made out of GRC (Glass Fibre

reinforced Cement) in required shape, size & thickness all as per manufacturers specifications, such as all decorative

articles should be made by using high power spray machine, using AR Glass fiber with minimum ZrO2 16% including

necessary scaffoldings for all heights, as per approved drawings and reference images. GRC elements thickness shall be 12- Rupees Five Thousand

15 mm. fixing edges will be 4O TO 50 MM GRC Elements shall be fixed on RCC Structure/Brick Work/ Primary Steel Nine Hundred Seventy

Structure (MS with protective coat of Red oxide/Zinc Primer Shall be Used). Hilti make GI Screw Fastners or equvalent, GI Seven And Paise Eighteen

Thread Rods and MS cleats shall be used for fixing of GRC elements on RCC/MS Primary fabricated structure. Joints shall be Only

filled with PU sealants/ base material of GRC as and where required. The quote rate shall be inclusive of all design, & shop

drawing and sample mock of all elements approval from Architect & consultant..Rate shall be inclusive of all required

fabrication work for fixing only primary strcure shall be provided as base structre only as per requirement. Mode and

GRC of measurement

CHAJJA shall be:in

BOTTOM BRACKET accordance

Providing andwith IS:Glass

fixing 1200. Contractor

reinforced shall submitt

concrete (GRC) Shop

bottom for approval

work,GRC includes SDS screw from front at 600 to 800 mm intervals with modulethickness jali 40mm border and all inside

Rupees One Thousand

20mm thick and module thickness in solid area 40 & 20 mm & hollow at back side having alkali resistance glass fibre type

162 100.00 1161.5 One Hundred Sixty One NO

3% minimum, compressive strngth 40 Mpa Minimumn, Fluxtural strength 10to12Mpa, dry density 1.8to 2.0 MT/Cum

And Paise Fifty Only

havning 14% water absorption, nesesary scaffolding worketc. complete as per detail drawings & as suggested and directred

by Architect /EIC.

Designing, Supply and Installation of LED SS Back light Signages, shown in drawing should be erected with S.S. 304 wall

Rupees Eight Thousand

mounting digital printing on various medium as per approved by EIC or architect. (font thickness -42 mm ) Rate is

163 5.00 8999.1 Nine Hundred Ninety Nine smt

inclusive of all other charges like required civil work, transportation, labour, colour, wastage etc. Measurement shall be valid

And Paise Ten Only

only for the Signages element including the supports/installation elements.

Jesalmer Stone Railing work - Providing and fixing Jesalmer Stone Railing work as per given detail drawing throughout in Rupees Forty Two

cement mortar1:3 (1 cement : 3 coarse sand), including balustar, jarukho, lamppost, polishing, cutting, coating, pointing in Thousand Three Hundred

white cementmortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment,matching the stone shade, etc. Loose Sixty Seven And Paise

and laid sample shall be approved by Architect and EIC before execution. Forty Eight Only

Providing and fixing 3 mm thick PVC sheets as Signage and Display of health signs/information of required size having retro

Rupees Six Hundred Fifty

165 50.00 reflective letters/design as per requirement, fixing the same through approved adhesive etc. complete work shall e carried 650.44 Nos.

And Paise Forty Four Only

out as per instruction of Engineer-in-charge (45 x 15 cms.) (work for all the floors)

Supplying & installing Brass Ball Valve conforming to IS 778, of RB, Italy or equivalent. Ball valve must be having screwed Rupees Two Thousand

166 5.00 ends. The ball valve should be with stand with maximum pressure up to 16 Kg/cm2. Complete job as specified & directed. 2147.61 One Hundred Forty Seven Nos

50 mm And Paise Sixty One Only

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug

Rupees Nine Thousand

40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink

167 2.00 9858.61 Eight Hundred Fifty Eight Nos

without drain board 610x510 mm bowl depth 200 mm, Kohler or Nirali Make Kitchen Sink 610 x 510mm with Sink spout of

And Paise Sixty One Only

wall mounting type, NIRALI - GRACE - PLAIN

Proving & fixing worli art painting as per drawing / approved by Engineer In charges/ Architect Rupees One Thousand

Eight Hundred Seventy

Four And Paise Fifty Six

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Proving & fixing Kutch Lippan Mud art as per drawing / approved by Engineer In charges/ Architect Rupees Six Thousand

169 41.29 6874.06 Eight Hundred Seventy smt

Four And Paise Six Only

Proving & fixing Bird spikes Size: 0.5m Length With 60 Stabs material - Stainless Steel SS/ Polycarbonate cover width -3 Rupees Ninety Two And

inches ,height of spikes -4 inch as per drawing / approved by Engineer In charges/ Architect Paise Ninety Two Only

Providing and fixing 15 mm thick 300 mm x 300 mm Tactile warning tiles (Attention Tiles i.e. Tectile Warning Surface

Indiactor (TWSI) of Johnsan Endura Tac Botton Yellow plus or quivalent make in flooring laid on 20 mm tihck cement

Rupees One Thousand

mortar 1:6 ( 1 Cement : 6 Coarse sand) on new surface and jointed with cement slurry including finished with flush pointing

Three Hundred Thirty

171 41.00 & cleaning the surface for all floors as per detailed drawing etc. completed as directed by Architect or Engineer in charge. 1332.43 smt

Two And Paise Forty

These tiles shall be Anti Skid, chemical resistant, Fade Proof, Frost - Heat & Weather proof, High Flexural Strength, Highly

durable, Stain resistance. All Tectile warning tiles meet the specific size and dimension standard as per required by ISO /

Providing and fixing coloured self adhesive PU Tactile tile, ground surface indicators of Poyurethene of size 300 mm x 300 Rupees Four Thousand

mm for guilding / warning to the visually visitors in the center / side of the pedestrian / approach pathway as per Five Hundred Twenty

specificatio and guidelines complete in all respect to the entinre satisfaction of Engineer in charge. Nine And Paise Eighty Five

Providing and fixing Braile indicator of size 170 mm x 35 mm for hand rails of the approved design and hame have braile Rupees Eight Hundred

173 5.00 dots raised 0.5 mm above the base plate to be installed at specific locations as per direction of Engineer in charge. 842.08 Forty Two And Paise Eight rmt

Providing and fixing Acrylic multilingual braile (raised dots) DIRECTIONAL SIGNBOARDS of size 225 x 150 mm designed as

per accessibility standards and having 3.5 mm thick acrylic base plate with Upper Case San Serif words made of white

Rupees One Thousand

acrylic non glare cut out letters of height 15 mm raised not less than 0.8 mm above base plate and the equivalent word

Two Hundred Seventy

174 15.00 written in Gujarati, English or Hindi non glare acrylic cut arrow pointing in the require direction. Each signboard to be fixed 1277.65 nos

Seven And Paise Sixty Five

as per manufacturers specifications on the wall at the approved location and at a height of 1200 mm from Floor level

complete as per design / specifications and guidelines as per entire satisfaction of the Engineer in charge.

Roofing Shingle (DUSOL PRO) made of sequencial 8 layers as 4 layers two times of natural coloured stone, elastomeric

modified bitumen, fibreglass mat & elastomeric bitumin. Inspect for damage,rot,or uneven areas.Replace as needed. Clean

off dust ,debris and old roofing materials.ensure the roof is smooth and completely dry.than Lay the first shingles along with

eaves and align it carefully for a straight edge. Use a propane tourch, holding it 6-12inches from the shingles underside. Rupees One Thousand

175 149.00 Sweep the flame evenly to heat the adhesive layer.once tacky and shiny, immediately press it onto the roof.use a roofing 1749.32 Seven Hundred Forty Nine Sq.mt.

roller or preasure board to press the shingles into the place.ensure full contact and remove air pockets. repeat the process And Paise Thirty Two Only

for each new shingle. overlap each shingles by 75-100mm to ensure proper seal.use ridge shingles or cut regular shingles to

fit the roof ridge or hips.tourch them into place,ensuring proper overlap and sealing.reheat and press any sections needing

additional adhesion.

APP Polymer Modified Bituminous Waterproofing Membrane(TIKIDAN MEMBRANE) sheet of 3mm thickness composed of

non wooven composite matrix of polyester mat as core reinforcing media suitably finished with thermo fusible polyethylene

film on top and bottom side of sheet as per Instruction of engineer in charge. Prepare the surface as clean the surface

thoroughly and ensure the surface is dry,smooth & sloped properly to allow drainage. than priming by apply a bituminous

Rupees Three Hundred

primer evenly across the surface using brush or roller and allow the primer to dry fully. after that unroll the APP membrane

176 149.00 337.34 Thirty Seven And Paise Sq.mt.

and cut it to required lengths and align the rolls,ensuring an overlap of 100mm side lap and 150mm end lap. after it using a

Thirty Four Only

propane gas tourch,heat the bottom side of the membrane while unrolling it slowly. the tourch will melt bitumen,allowing it

to bond with the primed surface. use a roller or wooden press down and remove any air bubbles.than make sure all

overlaps are properly heated and bonded.press firmly with a roller to ensure water tight sealing.use prefabricated

membrane corners or cut pieces to ensure full coverage. re torch any suspect areas to ensure proper adhesion.

BITUMEN PRIME COATING is intended for preparation of the surface before installation of torch-on or self-adhesive

Rupees Sixty Two And

177 149.00 waterproofing material. The primer presents a mix of high-quality bitumen and specially selected organic solvents. It has an 62.62 Sq.mt.

Paise Sixty Two Only

enhanced covering capacity, penetrability and short drying time as per Instruction of engineer in charge.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Followed by supply of high-end and SBS polymer modified Ridge with the help of torching method and as directed by Rupees Six Hundred

178 77.00 engineer in charge. 632.26 Thirty Two And Paise R.mt.

Twenty Six Only

Providing and Fixing 12mm EVEREST cement sheet SIZE 2400x1200 mm The quoting price should be inclusive of all types Rupees Seven Hundred

179 149.00 of taxes & duties ,packing, forwarding, loading, unloading, installation. And work shall be done as per detailed drawing and 749.42 Forty Nine And Paise Sq.mt.

as directed by engineer in charge. Forty Two Only

Providing & fixing Percolation well (450mm dia tube well up to 40 meter depth) with including parts Johnson V wire

screen, MS pipes, Gravel, vent pipe, etc. Infiltration Testing & including Boring and sinking 175mm diameter percolation pile

Rupees One Lakh(s) Fifty

with 160 mm OD uPVC Casing pipes & Screens (C.S.) IS 12818:1992 as per specifications with hand auguring system and

180 1.00 150995 Thousand Nine Hundred Nos

clearing the site on completion of depth from max 24 meter. with Gravel, Vent pipe 50mm dia 6 meter length, 160mm dia

Ninety Five Only

Strainer pipe 3mm Opening. 300mm height 300mm dia upvc strainer in sump, etc. Complete job as specified & and as per

detailed drawings as directed.

Providing & Fixing Artifical Grass Lawn 25 MM THICK as per approved by Engineer in charge / Architect Rupees One Thousand

181 82.00 1062.52 Sixty Two And Paise Fifty smt

Providing & Fixing Glass Brick AS PER given in drawing or as per approved by Engineer in charge / Architect Rupees Ten Thousand

Nine Hundred Ninety

Seven And Paise Eighty

Annual Maintance Contract -1 St year Plumber ,Fitter ,electrician , garden , hvac ,cleaning work , MATERIAL FOR Rupees Seventeen Lakh(s)

MACHINERY OF CLEANING WORK ,GARDEN , WATER SPREDING PIPE , LIGHT , DUSTBIN ,LOCK and other requirement Eighty Eight Thousand

material For maintance work Two Hundred Fifty Seven

And Paise Fifty Two Only

Annual Maintance Contract -2nd year Plumber ,Fitter ,electrician , garden , hvac ,cleaning work , MATERIAL FOR Rupees Seventeen Lakh(s)

MACHINERY OF CLEANING WORK ,GARDEN , WATER SPREDING PIPE , LIGHT , DUSTBIN ,LOCK and other requirement Eighty Eight Thousand

material For maintance work Two Hundred Fifty Seven

And Paise Fifty Two Only

Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete

piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, Rupees Two Thousand

185 80.00 excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap 2918.34 Nine Hundred Eighteen Rmt

etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 450 mm dia And Paise Thirty Four Only

Providing , creating and designing Mural Art with all materials including Ferro cement, Fibre, Resin- Hardener mix

Material, FRP,glass,Metal , mosaic tiles, SS material, metallic sheets, wooden batons ,grc etc. in different 2D/3D colors and

shade of required thickness and shape creating as per detailed drawing Approved by architect, including providing and

using adhesive, white cement, color pigments ,and permanent colors with all labours (including necessary Scaffolding), up

Rupees Ten Thousand Six

to twenty meter height, Achieving required look and picture as directed by architect..The rate also includes for all necessary

186 60.00 10623.18 Hundred Twenty Three smt

items required to complete the job as per design /drawing and consultant's instructionsThe mural is crafted using ferro-

And Paise Eighteen Only

cement, a durable and versatile material, with a thickness of 50mm, depth , The process begins with creating a wire mesh

framework, which is then layered with a mixture of cement, sand, and water. The ferro-cement mixture is applied in

multiple layers, allowing each layer to set before adding the next. The mural's design as per approved by EIC/ Architect, is

carefully sculpted and molded into the ferro-cement layers. Once the final layer is set, the mural is finished with a

Box cuttingcoating to surface

the road enhancetoits durability

proper slopeand

andweather resistance.

camber for making aThe resulting

base for roadmural

workisincluding

a stunning and long-lasting

the excavated Rupees One Hundred

187 49.00 stuff and depositing on the road side slope as directed upto all lead. 114.44 Fourteen And Paise Forty Cum.

Providing and Laying 125mm thick W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm in layers including Rupees One Thousand

188 17.00 16% stone screening 13.2mm size and 8% stone dust as filler, including spreading, watering and cosolidation by vibratory 1035.25 Thirty Five And Paise Cum.

roller as per MoRTH specifications etc. complete as directed by Engineer-in-charge. Twenty Five Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Construction of un-reinforced, dowel jointed M-250, plain cement concrete pavement over a prepared sub base with

Rupees Four Thousand

grade cement, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm,

189 20.00 4954.05 Nine Hundred Fifty Four Cum.

mixed in a b laid with a fixed form spread, compacted and finished admixtures as approved, concrete surface hardner,

And Paise Five Only

curing compound, finishing to lines and grades as per drawing

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying

a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform Rupees Three Hundred

190 300.00 and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking 367.72 Sixty Seven And Paise smt

should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 Seventy Two Only

mcd/m2/lux during the service life during the day time.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Rupees Three Hundred

thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the

191 66.00 374.92 Seventy Four And Paise rmt

joint with C:M 1:3 (1cement:3fine sand) etc complete.

Ninety Two Only

Proving & supplying Field soil and Spreading and mixing of soil & silt as per approved By engineer In charges . Rupees Six Hundred

192 119.00 688.62 Eighty Eight And Paise Cmt

Proving & farm Yard Manure and laobur for spreading and mixing farm yard Rupees One Thousand

193 80.00 1238.06 Two Hundred Thirty Eight Cmt

And Paise Six Only

Supplying well grown shrub plants of average height 3' to 4' and planting in 300x300x300mm size pits by mixing of FYM &

existing soil in ration 1:3 with soil, pesticide & insecticides. Plant should be disease free and fungus free 8"x10" polythene

Rupees One Thousand

bag. Plastic bag or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Bill

194 81.00 1133.06 One Hundred Thirty Three Smt

shall be placed after 45 days of plantation of shrubs. Mortality rates to be inclusive. Work shall be done as shown in the

And Paise Six Only

drawing or as directed and approved by EIC/Architect. The ground coverage should be dence and uniform throuout the

Supply and planting of tree of specified variety including excavation of pit 600x 600x600mm depth mixing of FYM &

existing soil in ratio 1:3 termite treatment and planting of plants (height 8' to 10' above bags/pots). Soil mounts 4'-8" in

size. Tree plantation should be carried on neatly accurately and with perfection as per drawing and instruction given by EIC.

Rupees Seven Hundred

Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Bill

195 30.00 759.89 Fifty Nine And Paise No

shall be placed after completion of maintenance period but not before stabilizing the hedges. Rates for mortality to be

Eighty Nine Only

inclusive. Providing and fixing tripod made of wooden ball, height 1.5m. Top bracket to be 300x300mm leg embedded in

ground up to 300mm and to have tar coat. Work shall be done as shown in the drawing or as directed and approved by EIC.

Proving & fixing Carpet lawn Rupees Four Hundred

196 796.00 461.79 Sixty One And Paise Smt

Seventy Nine Only

Supply and planting box hedge shrub of average height 1' to 2' by providing and fixing FYM @ rate of 0.06 cmt/pit with soil

pesticide & insecticides. Plants shoud be disease free and fungus free in 6"x8" polythene bag. Plastic bags or pot should be

Rupees One Thousand

removed carefully and soil around the roots should not be dropped or disturbed much. Bill shall be placed after completion

197 81.00 1133.06 One Hundred Thirty Three Smt

of maintenance period but not before stabilizing the shrubs. Mortality rates to be inclusive. Work shall be done as shown in

And Paise Six Only

the drawing or as directed and approved by EIC. The ground coverage should be dense and uniform throughout the planting

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the Rupees Six Hundred

198 40.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 677.94 Seventy Seven And Paise Mtr

300mm Ninety Four Only

Providing and laying Jaisalmer (16-18 mm thick) two side polished over flooring / dado skirting 20mm thick cement Rupees One Thousand

199 189.00 mortar 1: 6 (1 cement: 6 coarse sand) finishing with flush Pointing in white cement and jointed with grey cement slurry 1902.84 Nine Hundred Two And smt

with matching pigment in flooring complete as approved by architect engineer in charge. Paise Eighty Four Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and laying Jaisalmer Moulding patti as per given drawing and details over 20mm thick cement mortar 1: 6 (1

Rupees Five Hundred

cement: 6 coarse sand) finishing with flush Pointing in white cement and jointed with grey cement slurry with matching

200 574.00 571.66 Seventy One And Paise Rmt

pigment with complete as approved by architect / engineer in charge. Hilti make GI Screw Fastners or equvalent, GI

WALL CLADDING WORKS (20-30 MM) Supply and fixing at site of work carved fine chisel dressed ornamental

BANSIPAHADPUR GOOD QUIALITY STONE in required size for temple work in 1:3 cement sand mortar and jointed in white Rupees Three Thousand

cement to match the colour of the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all visible Five Hundred Twenty

angles and edges to be straight and free from chipping work shall be strictly in plumb line and level including providing Four And Paise Ninety

doweling and jointed by copper metal damps of suitable size and as per drawing and design for approved drawing which is Only

displayed in full scale at Temple site.

Providing & fixing ficas toparies 1.5 to 1,8 m (h) A as per approved by EIC / Architect. Rupees Eighteen

202 5.00 18584 Thousand Five Hundred each

Eighty Four Only

Providing ficas golden bushi -0.90 m as per approved by EIC / Architect. Rupees Two Hundred

203 5.00 290.88 Ninety And Paise Eighty Each

Providing date palm -3.00 to 3.60 m (h) as per approved by EIC / Architect. Rupees Eleven Thousand

Six Hundred Fifteen Only

Providing ficas safari -black bushi for hedge -0.90 to 1.2 m(h) as per approved by EIC / Architect. Rupees Four Hundred

205 5.00 464.6 Sixty Four And Paise Sixty Each

bismarckia palm at lawn area -2.40 to 3 m as per approved by EIC / Architect. Rupees Seven Thousand

Five Hundred Forty Nine

And Paise Seventy Five

Providing & Fixing Double Swing – 1Nos. Length – 10-15 ft. Width – 5-7 ft, Height – 9-12 ft. All round and rectangular pipes Rupees One Lakh(s)

are GI or CR, ISI make Gauge 14 gauge, 2 coating are red oxide and final paint of PU/ Epoxy/ industrial paint, Nut bolt GI Twenty Five Thousand

Bearing heavy, (branded, as per buyer approval) FRP seat thickness 4-5mm, Swing assembly 6mm chain with all accessories Four Hundred Forty Two

and fixing Before Execution sample Approved By Engineer in Charge /Architect. Only

Providing & Fixing Wave Slides – 1Nos. Wave Slide-16*4Ft. L-10ft,Platform 6ft,Structure 60mm,50mm GI Pipe. Powder Rupees One Lakh(s)

coated. Slide roller LLDPE Plastic 52mm rolls Before Execution sample Approved By Engineer in Charge Twenty One Thousand

Nine Hundred Fifty Seven

And Paise Fifty Only

Providing & Fixing Seesaws Two Sets – 2 Nos. 1 normal see saw, 1 spring Length – 8-10 ft., Width – 2-3 ft., Height – 2-3 ft. All

Rupees Eighty Two

round and rectangular spring legs are GI or CR, ISI make Gauge 14 gauge, 2 coating are red oxide and final paint of industrial

Thousand Two Hundred

209 1.00 paint, Nut bolt GI, FRP thickness 5-6 mm All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge, 2 coating 82234.2 each

Thirty Four And Paise

are red oxide and final paint of PU/ Epoxy/ industrial paint, Nut bolt GI Bearing heavy, (branded, as per buyer approval)

Before Execution sample Approved By Engineer in Charge

Designing, providing, fixing & erection STONE FOUNTAIN complete inclusive of all material, labor, wastages, necessary

tools & tackles, adhesives, required hardware, accessories, Carving, Any type of framing work as per required, Necessary Rupees One Lakh(s)

civil work if required, foundation if required as per design, ligting if required and work complete including all type of Seventy Four Thousand

material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, all floor, all levels, all heights etc. Two Hundred Twenty

complete as per drawings, specifications & instruction of Client/EICProviding & Fixing Street Decor Stone Fountain Garden Five Only

as per given drawing details and approved By engineer In charge / Architect

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Designing, providing, fixing & erection bench complete inclusive of all material, labor, wastages, necessary tools & tackles,

adhesives, required hardware, accessories, Carving, Any type of framing work as per required, Necessary civil work if

Rupees Seventy Five

required, foundation if required as per design, ligting if required and work complete including all type of material, fittings,

Thousand One Hundred

211 1.00 fixtures, Finish, loading, unloading, transporation, all leads, accessories, all floor, all levels, all heights etc. complete as per 75194.5 Job

Ninety Four And Paise

drawings, specifications & instruction of Client/EIC. Providing & placing Stone circular seating as per ref images or drawing.

Material: Canadian wood top finish with metal supports 4 Feet Length X 1.5 Feet Wide X 1.75 Feet High X 3 Benches +

Feet High Table X 3 Feet Diameter

Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including necessary excavating 23 Cum.

Rupees Two Thousand Six

brickwall, beding CC 1:2:4, top RCC slab, 15mm thick plaster and connection of rain water pipes as per detail drawings and

212 6.00 2600.75 Hundred And Paise Nos

as directed by engineer – in – charge.

Seventy Five Only

Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth including necessary excavation 23cm

Rupees Twelve Thousand

brickwall beding CC 1:2:4 top RCC slab. 15mm thick plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt.

213 1.00 12858.31 Eight Hundred Fifty Eight Nos

Kapachi 10 to 12mm size and coarse sand 0.60 mt. etc. as directed.

And Paise Thirty One Only

Driling of bore 215 mm Dia strata ( 0 to 30 metre) Indcluding lowering and fixing of 175 mm dia ERW pipes / PVC pipe up Rupees Three Hundred

214 250.00 to required depth and furthether driling of 165 mm dia bore hole in rocky strata DTH ring indluding fiting etc. complete (As 330.27 Thirty And Paise Twenty Meter

per Zone) Seven Only

Supply of 175mm dia UPVC casing pipe :Cstype: of si marked approved qulity Rupees Nine Hundred

Fifteen And Paise Six Only

Providing standerd lenth ISI mark high density polythenc HDPE pipes suitale for potable water as per IS speecification Rupees Fifty Five And

4984/1995 ncluding all charges etc,cmplete 40 mm dia (10 kg / Sqm Cm.PE 80) Paise Fifty Five Only

Providing Flat PVC cable for submersible pumnp as per detail specification as per GWSSB R/C Size of 4.00Sq.mm. Rupees One Hundred

217 160.00 124.23 Twenty Four And Paise Meter

Twenty Three Only

Providing and fixing M.S.Clamp with 5mm thick M.S.plate bore plug including arrangement with nuts,bolts and lock nuts Rupees One Thousand

etc.complete. Two Hundred Twenty

Seven And Paise Eighty

Providing and Installation of Double Seater Sofa made with teak wood, all wood shall be of first class seasoned hard wood

teak (CP).Legs shall be of 70mmx35mm in section made to shape as shown on drg. Wooden arm shall be made to shape out

of 35mmx70mm in section teakwood. Front and side rails shall be of 35mmx100mm in section teakwood.40mmx40mm in

section teakwood bearers shall be provided at the bottom of seatcover over which 50mm x20mm wooden battens, shall be

fixed equally spaced in the long pieces. Back shall be made of frame of rails and styles of 70mmx35mm in section

teakwood.(a) The seat and back cushion shall be of 100 mm to 150 mm thick, 40 Density and of Make:- Sleepwell / Rupees Twenty One

219 4.00 Springwell (b) The cushion cover should be of Make : D’ Décor / Neptune / Raymonds / Vimal or equivalent brand, Colour of 21715 Thousand Seven Hundred NO

tapestry shall be as directed by Architect/ Site Incharge as per selection/ approval.(c) All polish work shall be done in Fifteen Only

Melamine finish. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger. Colour of Polish shall be as directed

by Architect/ Site Incharge as per selection/ approval.Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and Installation of Three Seater Sofa made with teak wood, all wood shall be of first class seasoned hard wood

teak (CP).Legs shall be of 70mmx35mm in section made to shape as shown on drg. Wooden arm shall be made to shape out

of 35mmx70mm in section teakwood. Front and side rails shall be of 35mmx100mm in section teakwood.40mmx40mm in

section teakwood bearers shall be provided at the bottom of seatcover over which 50mm x20mm wooden battens, shall be

fixed equally spaced in the long pieces. Back shall be made of frame of rails and styles of 70mmx35mm in section Rupees Twenty Nine

teakwood.(a) The seat and back cushion shall be of 100 mm to 150 mm thick, 40 Density and of Make:- Sleepwell / Thousand Seven Hundred

Springwell (b) The cushion cover should be of Make : D’ Décor / Neptune / Raymonds / Vimal or equivalent brand, Colour Forty Four And Paise Fifty

of tapestry shall be as directed by Architect/ Site Incharge as per selection/ approval. (c) All polish work shall be done in Only

Melamine finish. Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger. Colour of Polish shall be as directed

by Architect/ Site Incharge as per selection/ approval. Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

Providing and Installation of Center Table made with teak wood, all dimension, shape and size shall be shown in drwgs. All

wooden work shall be of 1st class seasoned hard teak wood with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample approval. Expose surface of teakwood shall be polished in

Rupees Fifteen Thousand

melamine finish with color tone as approved by Architect / Site Incharge. Make of Polish shall be Melamine by Asian Paints /

221 2.00 15554 Five Hundred Fifty Four NO

Nerolac / Berger and strictly as per manufacturer’s instructions. PVC/hard rubber shoe of 1st quality shall be screwed all

legs. NOTE : Entire polish work shall be done in the presence of Engr-in-Charge at site only. Rest all other details &

dimensions as shown in drwgs.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities to

Providing andafter approval.of Corner Table made with teak wood, all dimension, shape and size shall be shown in drwgs. All

wooden work shall be of 1st class seasoned hard teak wood with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample approval. Expose surface of teakwood shall be polished in

Rupees Nine Thousand

melamine finish with color tone as approved by Architect / Site Incharge. Make of Polish shall be Melamine by Asian Paints /

222 2.00 9898 Eight Hundred Ninety NO

Nerolac / Berger and strictly as per manufacturer’s instructions. PVC/hard rubber shoe of 1st quality shall be screwed all

legs. NOTE : Entire polish work shall be done in the presence of Engr-in-Charge at site only. Rest all other details &

dimensions as shown in drwgs.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities

to be executed after approval.

CHAIR (High Back): Providing and supplying Conference High back chair the seat & back are made of 1.20cm thick hot

pressed plywood upholstered with fabric and moulded PU foam, together with moulded seat & back covers. The back foam

Rupees Thirteen

should be designed with contoured lumber support for extra comfort. The size of chair 45cmx53cm (Back side) and

223 2.00 13635 Thousand Six Hundred NO

52cmx48cm (seat size). The PU foam should be moulded with density =45 ± 2 kg/m3 .with One piece armrests. The

Thirty Five Only

armrests are scratch and weather resistant. The permanent contact mechanism is designed with 360° revolving type, with

pneumatic height adjustment.

CHAIR (Low Back): Providing and supplying Conference Low back chair the seat & back are made of 1.20cm thick hot

pressed plywood upholstered with fabric and moulded PU foam, together with moulded seat & back covers. The back foam

should be designed with contoured lumber support for extra comfort. The size of chair 45cmx53cm (Back side) and Rupees Six Thousand Five

52cmx48cm (seat size). The PU foam should be moulded with density =45 ± 2 kg/m3 .with One piece armrests. The Hundred Sixty Five Only

armrests are scratch and weather resistant. The permanent contact mechanism is designed with 360° revolving type, with

pneumatic height adjustment.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Reception Table: Providing and fixing Reception counter/table size of 1500 mm-1800 mm L x 700 mm W x 1000 mm H

made out of 18mm Marine Ply as per design inner cladded with 1.0mm thk laminate & the edges to be finished with

necessary mouldings(as per design), etc. Special 6" drawer to be made with dividers of 12mm BWR plywood The front of

the drawer made out of 19mm BWR block board finished with 4.0mm veneer, sides 12mm BWR plywood and bottom to be

made of 6mm BWr plywood .The Facia Jali to be made with Corian CNC design as per drawing with back light Provision,the Rupees Thirty Six

225 1.00 drawers and shutters to be provided with necessary drawer sliding channels,handles, hinges, locks etc.Wire manager, 36865 Thousand Eight Hundred NO

legrest,Redymade black powder coated CPU trolly, keyboard tray, tea tray finished with 1.0mm laminate to be provided. 3" Sixty Five Only

x 1/2" white beach white ceader skiriting to be provided with natural polish in all visible areas. 18-20 mm thk Artificial

Stone / Quartz with bullnosed moulding (double) to be provided at counter top, the work should be completed as per

specification. The work to be completed as per specification ,design and approval of the Architect /EIC as per detailed

drawings and material Selection.

Manager Table: Providing and fixing counter/table size of 900 mm-1200 mm L x 700 mm W x 1000 mm H made out of

18mm Marine Ply as per design inner cladded with 1.0mm thk laminate & the edges to be finished with necessary

mouldings(as per design), etc. Special 6" drawer to be made with dividers of 12mm BWR plywood The front of the drawer

made out of 19mm BWR block board finished with 4.0mm veneer, sides 12mm BWR plywood and bottom to be made of

Rupees Twenty One

6mm BWr plywood .The Facia Jali to be made with Corian CNC design as per drawing with back light Provision,the drawers

Thousand Seven Hundred

226 1.00 and shutters to be provided with necessary drawer sliding channels,handles, hinges, locks etc.Wire manager, 21755.4 NO

Fifty Five And Paise Forty

legrest,Redymade black powder coated CPU trolly, keyboard tray, tea tray finished with 1.0mm laminate to be provided. 3"

x 1/2" white beach white ceader skiriting to be provided with natural polish in all visible areas. 18-20 mm thk Artificial

Stone / Quartz with bullnosed moulding (double) to be provided at counter top, the work should be completed as per

specification. The work to be completed as per specification ,design and approval of the Architect /EIC as per detailed

drawings and material Selection.

SINGLE BED FOAM MATTRESS: Mattress made from Bonded foam with softy sandwich layer, Foam mattress made from

standard quality bonded foam of 100mm thick with 50 mm thick softy foam which is from standard make, Both foam are fix Rupees Four Thousand

227 36.00 with standard glue with both side kwilted cotton fabric cover, Bed all edges are stitch with pipeing finish with standard 4242 Two Hundred Forty Two NO

finishing, Cotton kwilt of Dark colour decorative shade require. Only

Metress Size : 78" x 36" x 4"

TEAK WOOD FINISH BED: Providing Material & Labour charge for making bed ( Bed Mattress size 36 x 78 inch )having

size of 975 mm x 2025 mm made up by 19 mm Thk. (double - sandwich) marine plywood as pheripherial supports at all

four sides & horizontal middle support with all necessary proper solution. Having 300 -350 mm high base made with teak

wood legs as per detail drawing. Top of bed is covered by 19 mm thk marine ply or teak wood 75 to 100mm patta. Bed Rupees Nine Thousand

228 36.00 corners are supported with 60 to 75mm teak wood round edje wood support finish with Laminate or polished. use of teak 9898 Eight Hundred Ninety NO

wood bidding of appropriate size at each joints All exposed surfaces of bed is polished. Sizes and patterns may be varies as Eight Only

suggested by architect. All fixtures and fastning must be approved by architect/EOI as per given standard make. Complete

with all hardwares like MS Nails & SS-304 screws etc. All Details as per shown in detail drawings & as per instructions of

architect / incharge engineer. Please see the Attached Make List for Apporoved Makes.

BED SIDE TABLE IN LAMINATE & TEAK WOOD FINISH: Providing and Installation of Bed Side Table made with teak wood,

all dimension, shape and size shall be shown in drwgs. All wooden work shall be of 1st class seasoned hard teak wood with

melamine polish/ finish. Top shall be of 15-18mm thick Arificial stone / Laminateas per selection or sample approval.

Rupees Two Thousand

Expose surface of teakwood shall be polished in melamine finish with color tone as approved by Architect / Site Incharge.

229 36.00 2929 Nine Hundred Twenty NO

Make of Polish shall be Melamine by Asian Paints / Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs. Rest all other details like drawer, shelves , knob &

dimensions/ details as shown in drwgs.

Note: Sample approvals needs to be done for the same, once it's finalized further

quantities to be executed after approval.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Storage- Providing and fixing stoarge units of full height as per drawing. They shall consist of 19mm thick plywood top,

sides, back, bottom, shelves and shutters. The bottom of the storages shall be at 100mm from FFL. The top of storages shall

be 1800mm TO 2000mm ht. The shutter shall be fixed with 6 Nos. 100 mm long stainless steel hinges of aaproved make &

teak wood lipping finished with melamine polish & laminate of approved shade with on one of the shutter and shelf facias

Rupees Sixteen Thousand

and Mirror other shutter. Division of the shutters shall be made equally according to the length of the storage. All the

230 6.00 16968 Nine Hundred Sixty Eight NO

external surfaces shall be finished with 1.0mm thick. Laminate of approved make 19mm thick. Ply shelves removable type

supported on side teak wood battens on both sides. All inner surfaces shall be finished with 0.8mm laminate on all sides

including the shutters inclusive of all necessary approved fittings like hinges, locks, SS brushed finish handles, tower bolts,

locks and any necessary hardware items as per sized specified in detail drawings. Material selection should be as per

engineer in charge and chief architect.

Desk with Storage- Providing and fixing stoarge units of full height as per drawing. They shall consist of 19mm thick

plywood top, sides, back, bottom, shelves and shutters. The bottom of the storages shall be at 100mm from FFL. The top of

storages shall be 1000mm ht. The shutter shall be fixed with 4 Nos. 100 mm long stainless steel hinges of aaproved make &

teak wood lipping finished with melamine polish & laminate of approved shade all of the shutter and shelf facias. Division of Rupees Nine Thousand

the shutters shall be made equally according to the length of the storage. All the external surfaces shall be finished with Nine Hundred Eighty

1.0mm thick. Laminate of approved make 19mm thick. Ply shelves removable type supported on side teak wood battens on Eight And Paise Ninety

both sides. All inner surfaces shall be finished with 0.8mm laminate on all sides including the shutters inclusive of all Only

necessary approved fittings like hinges, locks, SS brushed finish handles, tower bolts, locks and any necessary hardware

items as per sized specified in detail drawings. Material selection should be as per engineer in charge and chief architect.

Cassate Unit Box: Providing Material & Labour charge for making Cassate Unit Box of size 900 - 1200 mm x 100-150mm

Rupees Twelve Thousand

considering 12 - 18 mm HDHMR / BWP MDF in desired cornice and beading/ moulding CNC design & Pattern provided in

Five Hundred Seventy

232 6.00 Detail drawings and Material Selection. Finishing with all necessary hardware etc. as per details given in drawing and as per 12579.55 NO

Nine And Paise Fifty Five

instructions of Architect/Engineer In charge.

Note: Sample approvals

Providing done for the

making same, once

VENEER it's finalized

finish false quantities

ceiling using 12tomm

BWP gradeafter approval.

IS 710 plywood cladded with 4mm

thick decorative veneer with wooden battens or mpulding/ cornice patti made of teak wood of approved pattern & Rupees Seven Thousand

including all hardware fixtures and fasteners, S.S. screws, grips and as per design, pattern, shapes and levels specified in Two Hundred Forty Six

detail drawings including two coats of PU polish including one coats of PU sealers, one coats of surfacer of approved make. And Paise Seventy Five

Complete as per architect's instructions & sized specified in detail drawings.Material selection should be as per engineer in Only

charge and architect.

Providing and making STRETCH CEILING false ceiling using box frame of 18 mm BWP grade IS 710 plywood cladded with

internal White Paint finish in approved pattern & including all hardware fixtures and fasteners, S.S. screws, grips and as per Rupees Seven Thousand

234 15.00 design, pattern, shapes and levels specified in detail drawings including LED lights approved makes and fixing of approved 7878 Eight Hundred Seventy SMT

make. Complete as per architect's instructions & sized specified in detail drawings.Material selection should be as per Eight Only

engineer in charge and architect.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC. for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved

Rupees One Thousand Six

texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

235 90.00 1674.1457 Hundred Seventy Four SMT

595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections

And Paise Fifteen Only

(galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and making PVC FALSE CEILING FOR WASHROOMS using 8mm thick Panel Size of 250mm Wide x 3000 mm

Length with wooden or approved Shade and pattern & including all hardware fixtures and fasteners, S.S. screws, grips & Rupees Two Thousand

236 130.00 Conrner angles including necessary framework wheerever required and as per design, pattern, shapes and levels specified 2133.12 One Hundred Thirty Three SMT

in detail drawings including cutting for light fixtures. Complete as per architect's instructions & sized specified in detail And Paise Twelve Only

drawings.Material selection should be as per engineer in charge and architect.

Plain Gypsum Board Ceiling : Providing & fixing suspended false ceiling, which includes Gypsteel ULTRA™ CRP surface

ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the

perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then

suspending Gypsteel ULTRA™ CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each)

Rupees Seven Hundred

from the soffit at 1220mm centres with Gypsteel ULTRA™ CRP surface ribbed ceiling angle of width 25mmx10mm fixed to

237 780.00 732.25 Thirty Two And Paise SMT

soffit with GI cleat and steel expansion fasteners(Mfg by Saint Gobain Gyproc). Then Gypsteel ULTRA™ CRP surface ribbed

Twenty Five Only

Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the Gypsteel

ULTRA™ intermediate channel with the help of connecting clip and in direction perpendicular to the Gypsteel intermediate™

channel at 457mm centres. Single layer of 12.5mm tapered edge Gyproc® MR (conforming to IS 2095 part 1, 2011) is then

screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Single layer of 12.5mm tapered edge Gyproc®

Providing to ISas2095

and fixing part 1, 2011)

per approved makeis Roller/Zebra/Roman

then screw fixed to ceiling section

curtain with 25mm

as suggested drywall

. Fabric at 230mm

with manual operation

and warranty etc as per manufacturer’s specifications. Fabric to be as per approved sample. All the work complete as per

Rupees One Thousand

the detailed drawing and instruction of Architect/Client. (Contractor shall provide treated conceal channel complete in all

Nine Hundred Ninety Four

238 80.00 respects on which all curtains shall be fixed and should also take load of all the manual curtains). All complete as per 1994.75 SMT

And Paise Seventy Five

approval of designer & instruction of PMC.Work completed as per the detailed drawing and instruction of Architect/Client.

Height will be measured from top of the conceal channel to sill bottom lvl and clear opening size only there will be not extra

payment towared overlaping.

Metal almirah having 6 locker of size 600 x 600 mm used high-quality stainless steel sheet. The surface after pickling, Rupees Twenty Four

phosphating and other processes to the process,then painting electrostastic Powder-Coating, strong corrosion resistance, Thousand Eight Hundred

not easy to rust. Thirty Five And Paise

Veneer/ Wooden finish wall paneling : Providing & Fixing wall paneling made 12-18 mm Marine Ply fixing on wall back

Rupees Seven Thousand

cladding done with ACP sheet & Facia & Edges finish with 4 mm Thick Veneer both vertically & horizontally finished with

240 25.00 7559.85 Five Hundred Fifty Nine SMT

groove pattern and design completed finished with PU polish as directed by EIC / Architect as per the sample approved by

And Paise Eighty Five Only

PVC Fluted Panel Wall Panelling : Providing & Fixing wall paneling made from 12mm thk Marine plywood ( IS:710 ) grade

with back cladding of 3-4 mm ACP sheet fixed level on wall with necessary hardware & Facia / Front Cladding with 10 to 12 Rupees Five Thousand

241 220.00 mm Thick PVC Fluted Panel Patta of approved make finished with groove pattern With TOP & Side Edges Covered with 5171.2 One Hundred Seventy One SMT

Teak Wood Beading Patti as per detailed Drawings and design completed finish as directed by EIC / Architect as per the And Paise Twenty Only

sample approved by the Architect.

Providing Material & Labour charge for pasting of Non Wooven wallpaper having featurers of scratch proof, perfect finish,

long lasting finish, having artistic appeal & intricate patterns, which are easy to fix on walls with exotic looks, having Rupees One Thousand

thickness of 0.2mm & roll size of 1300mm width or any size as per selection, as selected by the Architect & Engineer Two Hundred Ninety

Incharge. Comlete with all necessary adhensives, etc as instructed by the Architect & Engineer Incharge. Samples should be Seven And Paise Eighty

approved by the Architect & Engineer Incharge. Please see the Attached Make List for Apporoved Makes. Five Only

Providing and Fixing Amastrong or equiv make Make Ambience Crystal (AC- 8.33mm) premium Commercial laminated

Wooden flooring of selected by architect venge/ Savannh oak fixing in proper shape and true line level, including fixing

Rupees Four Thousand

with primary base 3-4 mm thick armer inlcuding 0.9 micron polithin to protect the seapage . Wooden Flooring planks of

243 15.00 4797.5 Seven Hundred Ninety SMT

size 1214mm x 141.50mm x 10mm thick Fixing on exacating floor. remove & premilinory clear all dirt and dust, necessary

Seven And Paise Fifty Only

apply Adhesive tools etc. for stage use 19mm marine ply by grid of 600 x 600mm with side finish of 1mm

laminate.complete with all necessary adheshives, nails,screw etc.as instructed by the architect & EIO.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and fixing of Photo Frames/ Customized Paintings of average size of length is 1'6"x2'0", with synthetic framing

wood frames, side edges with 3 mm thick mount board(of desired colour shade), with front cover of 4 mm thick of float

Rupees Four Thousand

glass; and backing of 5/6 thk MDF board and with necessary taping and fixing with screws / aluminium hooks; all complete

244 10.00 4898.5 Eight Hundred Ninety NO

in all respect. The images/ photographs /paintings have to be approved by Engineer In charge / Architect before

Eight And Paise Fifty Only

installation at site.

Providing and fixing of Photo Frames/ Customized Paintings of average size of length is 3'0"x4'0", with synthetic framing

wood frames, side edges with 3 mm thick mount board(of desired colour shade), with front cover of 4 mm thick of float

glass; and backing of 5/6 thk MDF board and with necessary taping and fixing with screws / aluminium hooks; all complete Rupees Six Thousand Nine

in all respect. The images/ photographs /paintings have to be approved by Engineer In charge / Architect before Hundred Sixty Nine Only

installation at site.

Providing and supplying artificial plants height between 3 to 4 feet approved by Architect such as moss and including Rupees Six Thousand Five

necessary stand for holding the plants as per the approved sample. Including Planter Box Hundred Sixty Five Only

Providing and supplying artificial plants height between 2 to 3 feet approved by Architect such as moss and including

Rupees Three Thousand

necessary stand for holding the plants as per the approved sample. Including the Planter Box and necessary decoration.

247 10.00 3787.5 Seven Hundred Eighty NO

Seven And Paise Fifty Only

Providing and applying 1mm-2mm thick trowel finish (Earthen)- A special multi-coloured combination of specific coated

stones or sand in a 4-coat system- 1 coat of base primer (50µm-60 µm) of required colour (Earthen) as approved by the

Rupees Nine Hundred

architect/engineer in-charge by Brush/Roller, 1 coat of Terre Granules (0.8mm to 1.2mm) thickness(Earthen) with steel

248 260.41 964.55 Sixty Four And Paise Fifty smt

trowel, 1 coat of clear matt/gloss finish top coat(30µm-40µm).

Above application is to be carried out on the single/double coat smooth mala plaster.

Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

Bed sheet size Light colour single bed sheet bleached white of size 176x274 cm, 100 % cotton, mass 170 grm/sqm as per IS Rupees Three Thousand

249 34.00 175- 1989 all as spd with one pillow covers of size 69 cm x46 cm of same material, Color AS PER BUYER CHOICE with make 3014.85 Fourteen And Paise Eighty NO

: Bombey Dyeing,Raymonds,D Decor, Trident Five Only

Providing and Installation of Dining Table made with teak wood, overall size shall be 1200 - 1500 mm long, 900mm wide

and 750 -800mm high ( As per final drawing). All wood work shall be of first class seasoned hard teak wood (CP teak wood).

Table Top : Top shall be of 18mm thick Italian/ Arificial stone / Quartz as per selection or sample approval.PVC/hard

Rupees Eighteen

rubber shoe of 1st quality shall be screwed all legs. Polish :Expose surface of teakwood shall be polish in natural wood

250 6.00 18033.55 Thousand Thirty Three NO

colour or as approved by Architect or Site In-charge strictly as per manufacturer’s instructions. Make of Polish shall be

And Paise Fifty Five Only

Melamine by Asian Paints / Nerolac / Berger. NOTE : Entire polish work shall be done in the presence of Engr-in-Charge at

site only. Rest all other details & dimensions as shown in drwgs.

Note: Sample approvals needs to be done for the same, once

Providing further

Installation to be executed

of General after made

Dining Chair approval.

with teak wood, all wood work shall be of 1st class seasoned hard

wood (CP teak wood). Plywood : 12-18mm thick BWR phenol bonded plywood shall be provided, PVC/hard rubber shoe of

1st quality shall be screwed all legs. Rest all other details & dimensions as shown in drwgs. FOAM : Polyurethane foam shall

be 75mm thick (with 32 Kg density per cubic meter) . UPHOLESTRY : D’ Décor / Neptune / Raymonds / Vimal or equivalent Rupees Six Thousand Sixty

brand, Colour of tapestry shall be as directed by Architect/ Site Incharge as per selection/ approval. All polish work shall be Only

done in Melamine finish by Asian Paints / Nerolac / Berger. Colour of Polish shall be as directed by Architect/ Site Incharge

as per selection/ approval.

Note: Sample approvals needs to be done for the same, once it's finalized further quantities to be executed after approval.

Supplying FRP Planter 15”x15”x15” made of white or any shade required FRP (Fibre Rupees Two Thousand Six

252 30.00 Reinforced Polymer) Planter 2600.75 Hundred And Paise NO

Seventy Five Only

Stainless Steel Fancy Garden Dustbin, Material Grade: Ss 304, Capacity: 30-35 Liter Rupees Twelve Thousand

253 6.00 12423 Four Hundred Twenty NO

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Stainless Steel Zero to Infinity Stainless Steel Perforated Round Dustbin for Dry Waste (Medium 7"X12"inch, Silver) Rupees Three Hundred

254 20.00 Stainless Steel,Open top. 353.5 Fifty Three And Paise Fifty NO

Full Height Glass Partition: made out of glazed partition with Slim line Partitions systems of 45 x 25 mm thick section on all

four sides with 10mm thick clear tempered glass, to be butt jointed with 2 to 3 mm edge chamfer & edge polishing all

Rupees Three Thousand

around. Distance between two butt jointed glass panels not to exceed 4mm. Edges and grooves between glass panels to be

255 60.00 3317.85 Three Hundred Seventeen SMT

filled with as Vertical "I" Section, between Glass to glass joint from FFL up to FCL Level neatly applied all complete as per

And Paise Eighty Five Only

architectural drawing. Rate shall include necessary approved hardware items including all materials and labour etc.

complete as per detail instruction of engineer-in charge and consultant.45 x 25 mm thick section ( JEB/Alloy make )

The overall size of the Podium shall be 600 L x 400 D x 1050 H. The Podium body shall be made up of veneer on 18mm

thick MDF and its visible edges shall be sealed using 2mm PVC edge band with automatic machine or Veneer . The podium

shall have one shelf to keep the belongings while being used by the faculty. The top surface of the prodium shall be provided

Rupees Twenty One

wtih 15 degree angle to enable the user keep the documents & use them properly. One Gromet cut out with cap shall be

256 1.00 21715 Thousand Seven Hundred NO

provided at the table top for accessing the wires. Unless specified tolerance of +/- 5 mm to be considered for product

dimensions i.e Length, Depth & height and tolerance of 5% to be considered for thickness & sizes of material & components

used. Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

Providing Material & Labour charge for making Flush Door (finished size of door is approx 61 mm) of size 900 - 1200 mm

x 2100 mm considering waterproof flush door sheet of 35 mm thickness covered both side by 9 mm marine ply & finished

with 4 mm thk vineer finished with PU polish on both sides of shutter supprted by SS -304 finish hinges. All exposed

Rupees Six Thousand Nine

framing of 65 mm x12 mm made by teak wood bidding and door patterns with inlay wooden beading or CNC design as per

257 120.00 6943.75 Hundred Forty Three And SMT

drawinfs and provided details complete with PU polish. Finishing with all necessary hardwares like handles, conceal

Paise Seventy Five Only

mortise locks, cylinders with 4-6 nos of keys, stopers,tower bolt,MS nails, SS-304 screws etc. as per details given in

drawing and as per instructions of Architect/Engineer In charge. Please see the Attached Make List for Apporoved Makes.

Supply, Installation, Testing and Commissioning of Electric driven main fire pump (Hydrant & Sprinkler Pump) suitable for

automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction

pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m.

head conforming to IS standards. The installation shall be complete with flexible coupling and coupling guard as required. b)

Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 Rupees Three Lakh(s)

phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS Twenty Three Thousand

standards. c) Common Base plate for Pump and motor and coupling, coupling guard and other accessories as required for Five Hundred Fifty Eight

complete Installation of pump set. Suitable cement concrete foundation with cement concrete plaster complete with anti- And Paise Forty One Only

vibration arrangement of cushy foot mountings shall be done contractor. The supply & Installation of J-Type bolt for Pump

fixing in vendor scope. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than

65% of the rated head. The shut off head shall not exceed 120% of rated head.

d) The pump should be tested for bench mark at factory & Test certifcate submit to client . The all require Technical

Supply, & Test certificate

Installation, shall

Testing and be submit forofLocal

Commissioning firepump

Jockey Authority approval.).

suitable Casingoperation

for automatic - Cast Iron to consisting

and IS:210, Gr. of

following: complete in all respect as required.a) Horizontal Type, multistage, centrifugal pump of cast iron body and bronze

impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70m.head conforming to IS standards. installation

shall be complete with flexible coupling and coupling guard as required. b) Squirrel cage induction motor with suitable HP

Rupees Ninety Thousand

with synchronous speed 2900 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for

259 1.00 90566.6168 Five Hundred Sixty Six SET

enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards.c) Required accessories to fix

And Paise Sixty Two Only

the pump, Common base plate for (a) and (b) from M.S. channel as required size. d) Suitable cement concrete foundation

with cement concrete plaster complete with anti-vibration arrangement of cushy foot mountings shall be in scope of

contractor. Common Base plat for Pump and Engine and coupling, coupling guard and other accessories as required for

complete installation of pump set.The supply & Installation of J-Type bolt for Pump fixing in vendor scope. The pump should

be tested for bench mark at factory & Test certifcate submit to client . & The all requrie Technical specification & Test

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supply, Installation, Testing and Commissioning of 150 mm dia Glycerine filled Pressure Gauge of range 0 - 15 Kg / cm²

conforming to IS - 3624 having bourdon tube of stainless steel 310 in cast aluminium, stove enameled, black, weather proof Rupees Two Thousand

260 3.00 case with outer, screwed aluminium bezel and complete with necessary U-type stainless steel siphon tube and cock 2876 Eight Hundred Seventy Six No

including providing suitably painted angle iron support to the tube etc.as per specification complete as required. Cost shall Only

be inclusive of providing any short pieces, nipples, elbows etc as required.

Supply, Installation, Testing and Commissioning of Pressure Switches for automation of fire pumps with requrie all

Rupees Six Thousand

aceessories include ball valve & Tool-tackles to complete job at satisafaion level of Client PM. Pressure switches shall be

261 3.00 6781 Seven Hundred Eighty No

double pole single throw type suitable for 1 phase supply with diaphragm. Aluminum Enclosure with IP 66 protection as

Supply, Installation, Testing and Commissioning of Heavy Duty double flanged Flexicon rubber (Rubber Bellow) expantion

joint ,PN 16, standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers Rupees Twelve Thousand

262 4.00 complete as required. 12925 Nine Hundred Twenty No

Body : Synthetic Rubber Five Only

Flange : GI 150 mm

100 mm Rupees Ten Thousand

263 1.00 10545 Five Hundred Forty Five No

80 mm Rupees Eight Thousand

264 1.00 8965 Nine Hundred Sixty Five No

Supply, Installation, Testing and Commissioning of the following sizes of G.I. Pipes of Class B (Meadium class) ISI marked

including accessories such as G.I. tees / elbows / reducers / couplings / unions / bends / flanges/Blank Flange/Bilnd

flange/End cap /dummy plate etc with proper MS bracket,structure support with U clamps with Anchor fasteners. and

laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint

Rupees One Thousand

after laying and Hydro testing after Installation etc. as per specifications complete as required. The quoted rate shall also

265 110.00 1506.1706 Five Hundred Six And Rmt

include for chasing / chipping walls and making them good with filler material and finished in cement morter etc. complete.

Paise Seventeen Only

The rate shall be inclusive of Pipe marking/tagging/arrow marking / letter writing as per Fire local norms with approved

paints as per CFO requrirment. For pipes upto 50mm dia threaded G.I. fittings shall be used and for pipes of 65mm & above

fabricated fitting from pipe with welded joint shall be used. G.I pipe sleeve of suitable higher size shall be provided

wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent

80 mm dia at either end. all as per requirements including cutting holes and chases in brick, R.C.C work and making good Rupees One Thousand

266 80.00 1170.3945 One Hundred Seventy And Rmt

Paise Thirty Nine Only

50 mm dia Rupees Eight Hundred

267 35.00 812.7009 Twelve And Paise Seventy Rmt

32 mm dia Rupees Five Hundred

268 60.00 595.2793 Ninety Five And Paise Rmt

Twenty Eight Only

25 mm dia Rupees Five Hundred

269 320.00 533.0336 Thirty Three And Paise Rmt

Providing & fixing Pot Strainer fabricated out of 8 mm thick MS plate having 18 gauge SS basket (with 3 mm perforation)

Rupees Thirty One

and SS handle. The basket shall be supported at bottom so as to stand weight of water on solid brass blocks. Contractor to

270 2.00 31961 Thousand Nine Hundred No

ensure that the Specifications of SS Jali inside the Pot-strainer shall be as per pump OEM recommendation. Cost shall be

inclusive of providing all necessary accessories complete as required. 200 mm

Supply, Installation, Testing and Commissioning of C.I. Y type Strainer ( PN 16) with 30 mesh SS screen supported on 18 Rupees Nine Thousand

swg thick SS perforated sheet with require flange & Nut bolt to complete the Job as satisfactory level . 150 mm Seven Hundred Sixty Nine

And Paise Ninety Four

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supply, Installation, Testing and Commissioning of swing type Cast iron Dual plate Non Return valve (IS:5312 ) with EPDM Rupees Fifteen Thousand

lining ductile iron disc and stainless steel spring (PN 16) 150 mm Dia. Five Hundred Ninety Two

And Paise Ninety Nine

100 mm dia. Rupees Nine Thousand Six

273 10.00 9687.535 Hundred Eighty Seven No

And Paise Fifty Four Only

80 mm dia Rupees Six Thousand

274 18.00 6742.6997 Seven Hundred Forty Two No

And Paise Seventy Only

Supply, Installation, Testing and Commissioning S.S. Fire Hydrant Single Landing Valve with 80 mm N.B. flanged inlet, SS

spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug, 5 mm

Rupees Four Thousand Six

275 9.00 thick S.S orifice Plate & all accessories Conforming to IS:5290. Including fixing with anchor fastener and flanged tapping 4688 No

Hundred Eighty Eight Only

from wet riser complete etc . Orifice plate Should made out of stainless steel plate to limit the pressure between

Kg/sqcm to 3.5 Kg/sqcm.

Supply, Installation, Testing and Commissioning of lockable Fire Hose Cabinet (750 mm x 600 mm x 250 mm deep) made of

18 SWG M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking

Rupees Three Thousand

arrangement by allan key, shall be painted with one coat of primer and two coats of synthetic enamel paint of approved

276 9.00 3438 Four Hundred Thirty Eight No

shade. stove enameled Fire red finish with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch

pipe and nozzle spanner. (Cost shall be inclusive of providing break glass box containing key for the cabinet along with

Supply & Installation of non-percolating rubber reinforced lined fire hose pipe (as per IS : 636) type-A of 63 mm dia, 1 X 15 Rupees Three Thousand

277 18.00 m length. The hose shall be rated for burst pressure of 38 Kg/sqcm. Hose shall be complete with ISI marked SS male & 3626 Six Hundred Twenty Six No

female coupling (IS:903) with SS wire binding. Only

Supply & Installation of 63 mm dia instantaneous pattern Branch Short S.S. pipe, 16 mm dia. nozzle conforming to IS

Rupees One Thousand Six

278 9.00 suitable for inter connection to hose pipe coupling complete as required. 1671 No

Hundred Seventy One Only

Supply, Installation, Testing and Commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose

reel drum , The hose reel shall be of 20 mm dia heavy duty reinforced rubber as per IS-5232 (suitable for test pressure of

Rupees Seven Thousand

not less than 30 kg / sq.cm ) of length 30 meter fitted with jet and 20 mm S.S shut-off nozzle @8 mm with ball valve &

279 9.00 7605.3725 Six Hundred Five And No

mm dia brass ball valve hose reel shall be provided with swinging type reel drum.The reel drum shall be provided packing

Paise Thirty Seven Only

gland of gun meet adjustable by means of nuts. The bearings shall be of gun metal. The real drums shall red enamel painted.

SS Shut-off nozzle With Discharge 8mm Hole as per specification complete as required.

Supply, Installation, Testing and Commissioning of Brass Ball Valves (PN 16) with all fittings required. Rupees One Thousand

280 9.00 a) 25mm dia 1314 Three Hundred Fourteen No

Supply , Installation, testing & Commossioning of following size of flange type C.I butterfly valve confirming to IS13095 /

Rupees Twelve Thousand

BS 5155 of following pressure class with flanges, nut bolts, gaskets other spares ,necessary pad locking arrangement

281 2.00 12344 Three Hundred Forty Four No

complete & including indicator for open and shut position as per fire practice etc complete.Complete requirment as per

drawing ,BOQ,Specification & as directed by EIC/ARCHITECT. PRESSURE CLASS PN 16 200 mm dia

150 mm dia. Rupees Seven Thousand

Rupees Four Thousand Six

Hundred Fifty Two Only

80 mm dia. Rupees Three Thousand

284 9.00 3731 Seven Hundred Thirty One No

65 mm dia. Rupees Three Thousand

Seventy Six Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supply,erection, testing and commissioning of hydraulically operated sprinkler alarm unit connected to sprinkler system

(150 mm dia) with turbine type automatic Alarm water motor Gong, Ductile Iron body, Bronze seat to be connected with

Rupees Forty Six

test and drain valves, trims and all other necessary components with bronze clapper, S.S shaft, C.I handhole cover, Nitile

286 1.00 46876 Thousand Eight Hundred No

rubber bushing and seat O ring, Flanged End connections as per manufacturer's specifications complete as required. UL

Seventy Six Only

listed and FM approved.

Providing & fixing gun-metal fire brigade 2 way inlet connection consisting of 2 Nos. 63 mm dia instantaneous type male

couplings with built-in check valves, 1 No. 100 mm dia Butter fly valve ( IS139095 / BS 5155 with flange type C.I butterfly

valve confirming to IS139095 / BS 5155 of following pressure class ( PN 16) with flanges, nut bolts, gaskets other spares Rupees Eight Thousand

287 1.00 ,necessary pad locking arrangement complete & including indicator for open and shut position as per fire practice etc.) & 1 8626 Six Hundred Twenty Six No

no 100 mm of NRV (Swing type Cast iron Dual plate Non Return valve (IS: 5312) with EPDM lining ductile iron disc and Only

stainless steel spring (PN 16)) and 100 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required

and as per IS:904-1963.

Supply, Installation, Testing and Commissioning of gun-metal fire brigade inlet connection consisting of 4 Nos. 63 mm dia

instantaneous type male couplings with built-in check valves, 1 No. 150 mm dia Butter fly valve ( IS139095 / BS 5155 with

Rupees Fourteen

flange type C.I butterfly valve confirming to IS139095 / BS 5155 of following pressure class ( PN 16) with flanges, nut bolts,

288 1.00 14251 Thousand Two Hundred No

gaskets other spares ,necessary pad locking arrangement complete & including indicator for open and shut position as per

fire practice etc.) , and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required and as per

Providing, fixing and testing forged brass 25 mm dia screwed inlet single acting air release valve, PN 16 with ball valve Rupees One Thousand

289 1.00 arrangement to be installed on top of riseres etc complete. End connection should be BSP threaded. 1569 Five Hundred Sixty Nine No

Supplying, Installation, Testing and commissioning of brass quartzoid sprinklers (UL listed) of 15 mm dia size, suitable for

Rupees Four Hundred

sustaining the pressure on the seat & water hammer effect. The type & temperature rating shall be as follows :rating of

290 165.00 457.6374 Fifty Seven And Paise No

deg.C. with required accessories , tools & tackeles to complete the job at satisfactory level of Client PM's.

Sixty Four Only

a) Pendent Type Sprinkler 57°C - Standard response

Supply, Installation, Testing and Commissioning of Test and Drain assembly with necessary pipe size & Fitting , valves, flow Rupees Seventy Two

switch, Sight glass, fittings with all require accessories to complete the job as per Client PM Requirement (all items shown Thousand Six Hundred

in drawing shall be part of drain assembly.) Twenty Two And Paise

50 mm dia. Thirty Two Only

Supply, Installation, Testing and Commissioning of Under Ground Pipes of the following sizes of welded, G.I. Pipes of Class C

(Heavy class) ISI marked including accessories such as G.I. tees / elbows / reducers / couplings / unions / bends /

flanges/Blind Flange/ end cap/ Dummy plate etc. The quoated rate inclusing requrie excavation in all kind of soil, refilling,

ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe as per drawing and

Rupees Three Thousand

backfilling for laying of under ground pipe with trust block at require distance as per specification. and Providing protection

292 12.00 3574 Five Hundred Seventy Rmt

to under ground pipes and fittings by applying protective primer thereafter wrapping with approved make of material of

4mm thick & 150 mm width protection coating as per IS:10221 by thermo fusion process. Overlap shall be maintained at

15mm the application process shall be strictly according to manufacturer's specification. Holiday testing conduct for under

ground piping. Note : The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest

applicable code & standard before applying paint etc. complete For pipes upto 50mm dia threaded G.I. fittings shall be used

pipes of 65mm & above fabricated fitting from pipe with welded joint shall be used. a) 150 mm Dia.

Dia. Rupees Two Thousand

Two Hundred Thirty Nine

And Paise Ninety Seven

Supply & Installation AUTO GLOW Signage's in Block / Small Letters of Specified Sizes , & Colour selection as per local CFO

Rupees Three Hundred

294 6.00 requriement with requried tool & tackels to complete the job in safactory level of Client PM's. 304 No

Fire Equipment: 4" X 12"

Fire Lift with Symbol: 6" X 16" Rupees Three Hundred

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

In case of Fire, do not use lift, use staircase with symbol : 6" x 16" Rupees Three Hundred

arrow downward +running main+emergency Exit with symbol: 6" X 16" Rupees Three Hundred

Floor Sign: 4" X 12" Rupees Four Thousand

298 10.00 4251 Two Hundred Fifty One No

Emergency Exit with symbol green colour (6"X16") Rupees Three Hundred

Co2 fire extinguishers with symbol(4"X4") Rupees Three Hundred

DCP fire extinguishers with symbol (4"X4") Rupees Three Hundred

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Fire Hydrant & Hose reel with symbol . (6"X8") Rupees Three Hundred

Fire alarm Manual call point. (4"X4") Rupees Three Hundred

Fire alarm panel (6"X16") Rupees Three Hundred

Supply, installation,assembly,connection, testing and commissioning of Fire power panel as per Drawing,Remote On OFF Rupees Four Lakh(s)

switch operation, Specification,Technical Datasheet&IS.& Single Line Diagram and other equipments required to complete Eleven Thousand Seven

the job. Hundred Twenty Three

Obtaining fire NOC From Chief Fire officer with required Details, Layouts and Testing as required and submitting to Rupees One Lakh(s) Forty

concern Department incl. all charges Two Thousand Only

Electrical Work Item

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

Rupees Four Hundred

bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

307 457.00 485.81 Eighty Five And Paise Pt.

base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected,

Eighty One Only

with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and

Rupees Six Hundred

hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected

308 72.00 674.68 Seventy Four And Paise Pt.

on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules

Sixty Eight Only

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / Rupees Five Hundred Ten

ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from And Paise Five Only

nearby switchboard/mcb db board.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

Rupees Seven Hundred

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

310 85.00 745.38 Forty Five And Paise Pt.

ceiling as per pipe erected with following type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Thirty Eight Only

Wire from mcb db board.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base

Rupees Twenty Five And

311 46.00 frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation 25.25 Ea

Paise Twenty Five Only

directed by Engineer In charge. (7) Blank Plate Single Cat.III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, Rupees Two Hundred

312 67.00 single mounting base frame covered with textured /metallic/white front plate modules erected on / in wall / ceiling with 257.55 Fifty Seven And Paise Fifty Pt.

following type accessories Cat. III Five Only

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction Rupees Forty Seven And

[C] CAT - 6 Paise Forty Seven Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

Rupees Twenty Four And

314 1180.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of 24.24 Mtr

Paise Twenty Four Only

pipes, in approved manner as directed.(a)20 mm

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

Rupees Thirty Three And

315 150.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of 33.33 Mtr

Paise Thirty Three Only

pipes, in approved manner as directed.(b) 25 mm

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with

stand point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as

Rupees One Thousand

required and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of

Three Hundred Forty Two

316 160.00 engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III 1342.29 Mtr

And Paise Twenty Nine

[13] 300mm x 38mm x 1.6 mm with Three Compartments (FOR ELV,POWER IN FLOORING)

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray

Rupees Four Hundred

should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like

317 300.00 471.67 Seventy One And Paise Mtr

nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..(5)

Sixty Seven Only

300 X 50 X 1.5 mm Thick (FOR ELV,ELE,HVAC,FIRE PLACED IN DUCT)

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare

Rupees Thirty Nine And

318 60.00 copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable 39.39 Mtr

Paise Thirty Nine Only

coverage overall sheathed with black PVC insulation. (b) RG-6

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base

Rupees One Hundred Sixty

319 8.00 frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation 160.59 Ea.

And Paise Fifty Nine Only

directed by Engineer In charge.(8) Computer RJ-45 socket Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base

Rupees Two Hundred Ten

320 5.00 frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation 210.08 Ea.

And Paise Eight Only

directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket [B] For Two Gang Cat.III

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base

Rupees One Hundred Sixty

321 4.00 frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation 160.59 Ea.

And Paise Fifty Nine Only

directed by Engineer In charge. (4) TV Co-axial Socket outlet Cat.III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories Rupees One Thousand

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white One Hundred Thirty Three

front plate,modules erected with necessary connections as directed. 1 no. 6A/16A universal plug-switch combined.3 nos. 6A And Paise Twenty Two

Switch 3 nos. 6A 5 pin Plug .For Modular Type Accessories Cat.III Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %, Rupees Three Hundred

323 5.00 CCT 3000 K to 6500K, 312.09 Twelve And Paise Nine Ea.

Luminaire efficacy> 85 lumens/watt , Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (H) Mirror Light 9 Watts, wall

mounted minimum 1 feet long

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name Rupees Four Hundred

324 27.00 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED 427.23 Twenty Seven And Paise Ea.

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Twenty Three Only

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

mark/name Rupees Seven Hundred

325 253.00 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED 758.51 Fifty Eight And Paise Fifty Ea.

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of One Only

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KVCat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

Rupees Two Hundred

CCT 3000 K to 6500K,

326 70.00 295.93 Ninety Five And Paise Ea.

Luminaire efficacy> 85 lumens/watt ,LED

Ninety Three Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral

driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, Rupees Ten Thousand

327 3.00 CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings 10818.11 Eight Hundred Eighteen Ea.

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The And Paise Eleven Only

Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (vii) above 200 to 250 watts Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

Rupees One Thousand

Seven Hundred Ninety

328 86.00 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED 1794.77 Ea.

Four And Paise Seventy

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B)

LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (vi) 36 watts,

24" x 24", Surge- 2KV.CAT III

Supplying and erecting approved make Bracket fan of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall Rupees Two Thousand

329 6.00 or with lead Cores and connections complete.Cat.II 2105.85 One Hundred Five And Ea.

Paise Eighty Five Only

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers &

Rupees One Thousand

square frame. 250mm with 1350 RPM Cat.II

330 14.00 1366.53 Three Hundred Sixty Six Ea.

And Paise Fifty Three Only

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser Rupees One Thousand

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod Nine Hundred Forty Eight

erected with earthing.(Make shall be approved by Engineer in charge)) And Paise Twenty Nine

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and

Rupees One Hundred

332 72.00 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. 108.07 Ea.

Eight And Paise Seven Only

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen And

Paise Eighteen Only

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete

Rupees One Hundred

334 72.00 with proper insulation without leakage and earthing. 108.07 Mtr.

Eight And Paise Seven Only

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container housed in

Rupees Nine Thousand

M.S./S.S./ABS body insulated with glass wool/puff complete with heating elements,adjustable thermostats 300C to 850C,

335 6.00 9513.19 Five Hundred Thirteen Ea.

indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation (B)15 Ltr-

And Paise Nineteen Only

.with 2 /3K.W. heating element Premium Category

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp Rupees Fifty Five

of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising of Thousand Eight Hundred

hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay Ninety Three And Paise

etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Forty Only

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter Rupees Twenty Nine

housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Thousand One Hundred

psi inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & Eighty Seven And Paise

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump Ninety Nine Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having Rupees One Hundred

338 228.00 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 112.11 Twelve And Paise Eleven Ea.

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

Rupees One Thousand

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action &

339 38.00 1969.50 Nine Hundred Sixty Nine Ea.

tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as

And Paise Fifty Only

directed (i) 25 Amps.DP Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms Rupees Seven Hundred

340 32.00 to IS :8828 in existing box having following capacity (c)63 Amp Cat.III 737.30 Thirty Seven And Paise Ea.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

Rupees Seven Hundred

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

341 20.00 702.96 Two And Paise Ninety Six Ea

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (a) single door (IP-30) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

Rupees Three Thousand

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

342 6.00 3412.79 Four Hundred Twelve And Ea

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase

Paise Seventy Nine Only

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iii)8 way

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

necessary IP42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

Rupees Sixteen Thousand

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

343 8.00 16392.30 Three Hundred Ninety Sq Mtr

copper wire / copperaluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

Two And Paise Thirty Only

bus & earth bolts, foundation flange - boltsbase Plates, sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel

shall be supplied

Providing with following

and erecting Approvedapproved

make Fourmanufacturers

pole mouldedwith

casefollowingsize.(C) The standard

circuit breaker having companies

breaking switch

capacity ICU gear

Rupees Six Thousand One

415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

344 13.00 6173.12 Hundred Seventy Three Ea.

supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

And Paise Twelve Only

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

Rupees Eight Thousand

415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s.

345 3.00 8055.76 Fifty Five And Paise Ea.

with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU

Seventy Six Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and

Rupees Twenty Thousand

above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on

346 1.00 20946.39 Nine Hundred Forty Six Ea.

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

And Paise Thirty Nine Only

ICS=100% of ICU only Cat III

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size Rupees Five Thousand

347 1.00 of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal 5415.62 Four Hundred Fifteen And Ea.

connections & complete erected in existing M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400 Paise Sixty Two Only

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus

having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

Rupees Six Hundred Sixty

348 12.00 insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports 660.54 Rn.Mtr

And Paise Fifty Four Only

/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (A) Suitable for

100 Amp. Capacity

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus

having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Rupees One Thousand

349 4.00 insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports 1037.27 Thirty Seven And Paise Rn.Mtr

/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (B) Suitable for Twenty Seven Only

200 Amp. Capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus

having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Rupees One Thousand

350 6.00 insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports 1469.55 Four Hundred Sixty Nine Rn.Mtr

/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (C) Suitable for And Paise Fifty Five Only

300 Amp. Capacity

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power,

Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance Rupees Fourteen

current, Power factor and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent Thousand One Hundred

energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average Twenty Three And Paise

current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage Eighty Four Only

40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display

colour Red, Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM Rupees Sixty Nine And

VOLTAGE installation to be erected as per IS-2551. Paise Sixty Nine Only

Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for . Rupees Thirteen

(E)250A / 320A Cat-lll Thousand Three Hundred

Fifty three Eight And Paise

Twenty one Only

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

Rupees Four Thousand

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

Eight Hundred Nineteen

354 2.00 CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings 4819.72 Ea.

And Paise Seventy Two

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (C) Post Top Lantern LED fitting comprises

of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %, Rupees Five Hundred

355 10.00 CCT 3000 K to 6500K, 573.68 Seventy Three And Paise Ea.

Luminaire efficacy> 85 lumens/watt , Sixty Eight Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (G) Step Light having

Aluminium die cast and ABS Plastic material. (i) 5 watts, Direct/Indirect luminaire Cat-lll

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

Rupees One Thousand

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Three Hundred Sixty

Seven And Paise Fifty Four

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (F) Spot Light 425 Lumens,

Surge-2KV (ii) 8 to 11 Watts Cat-lll

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door

Rupees Three Thousand

internally supported on both side,with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

357 2.00 3595.60 Five Hundred Ninety Five Ea

mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar

And Paise Sixty Only

inside and out side with three tank powder coated paint. section pillar roof should be without joint with water leakage proof

& tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup

Rupees Three Thousand

channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum

One Hundred Sixty Eight

358 2.00 switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & 3168.37 Ea

And Paise Thirty Seven

housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V Rupees Eight Thousand

359 2.00 operating coil suitable for (L&T, BCH,T.C., Siemens, C&S make).(C) for 60 / 70 A rating 8141.61 One Hundred Forty One Ea

And Paise Sixty One Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Rupees Eighty Two And

insulated stranded wire of green colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and Paise Eighty Two Only

accessories.(b) 2 wire 2.5 sq. mm (FOR COMPUTER BOARD and SWITCH BOARD)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

Rupees One Hundred

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

361 231.00 112.11 Twelve And Paise Eleven Mtr

wire of green colour for earth continuity of following size(A) with medium class Rigid PVC pipe and accessories.(a) 2 wire

sq. mm (FOR 15/16A SS & AC)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Rupees Five Hundred

362 150.00 wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 540.35 Forty And Paise Thirty Mtr

1/2 core) (Meter To Main Panel) Five Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Rupees Two Hundred

363 97.00 wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 284.82 Eighty Four And Paise Mtr

mm core)(For Floor Sub Panel and Pump Panel) Eighty Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on Rupees Nine Hundred

364 350.00 wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 16 987.78 Eighty Seven And Paise Mtr

Sq. mm (MAIN PANEL TO FEEDER SECTION PILLAR AND POWER DB) Seventy Eight Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be Rupees One Hundred

365 300.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm (Street Pole 140.39 Forty And Paise Thirty Mtr

To Pole AND LIGHTING DB) Nine Only

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having Rupees One Hundred

366 350.00 XLPE Insulation, steel wire armouring & FRLS outer sheath complete as requlred, 119.43 Nineteen And Paise Forty Mtrs.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid

Rupees Five Hundred Ten

367 110.00 on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 6 510.05 Mtr

And Paise Five Only

Sq. mm ( USED FOR LIFT)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on Rupees Six Hundred

368 250.00 wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(A) 4 core 10 676.70 Seventy Six And Paise Mtr

Sq. mm Seventy Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Rupees Four Hundred

369 60.00 wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 490.86 Ninety And Paise Eighty Mtr

1/2 core) (FOR HVAC PANEL) Six Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete Rupees Thirty Eight And

with out going tails, insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm Paise Thirty Eight Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete Rupees Forty Seven And

with out going tails, insulating tape etc for following size of cables. (D) 2 to 4 core 16 Sq. mm Paise Forty Seven Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

Rupees Seventy Five And

372 8.00 armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm 75.75 Ea.

Paise Seventy Five Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated Rupees One Hundred

373 2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core 95 Sq. mm 131.30 Thirty One And Paise Ea.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated Rupees One Hundred

374 2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core 120 Sq. mm 140.39 Forty And Paise Thirty Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Rupees Fifteen And Paise

375 16.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 15.15 Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Rupees Twenty And Paise

376 32.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50 20.20 Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Rupees Forty And Paise

377 8.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (F) 95 40.40 Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Rupees Forty Five And

378 8.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 120 45.45 Ea.

Paise Forty Five Only

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high

Rupees Eight And Paise

379 8.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 8.08 Ea.

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Rupees Seventeen And

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(b) Paise Seventeen Only

One wire 1.50 sq. mm ( FOR PANEL INTERNAL WIRING)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Rupees Twenty Seven And

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (c) Paise Twenty Seven Only

One wire 2.50 sq. mm ( FOR PANEL INTERNAL WIRING)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Rupees Fifty Six And Paise

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (e) Fifty Six Only

One wire 6.00 sq. mm ( FOR PANEL INTERNAL WIRING)

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, Rupees Ninety One And

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (f) Paise Ninety One Only

One wire 10.00 sq. mm ( FOR PANEL INTERNAL WIRING)

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back Rupees Fifty Five And

filling the same and making the surface as normal ground. Paise Fifty Five Only

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

Rupees Sixty Two And

385 180.00 necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / 62.62 Mtr.

Paise Sixty Two Only

road surface for enclosing cable (A)50 mm outer dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

Rupees Ninety Five And

386 50.00 necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / 95.95 Mtr.

Paise Ninety Five Only

road surface for enclosing cable(C))90 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with Rupees One Hundred

387 198.00 necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / 137.36 Thirty Seven And Paise Mtr.

road surface for enclosing cable (D)120 mm outer dia. Thirty Six Only

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of Rupees One Hundred

388 100.00 following Size. (D) 3 Core x 6 Sq. mm. (FOR WATER TANK) 172.71 Seventy Two And Paise Mtr.

Seventy One Only

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of Rupees Two Hundred

389 300.00 following Size. (E) 3 Core x 10 Sq. mm. (FOR WATER TANK AND BORE) 295.93 Ninety Five And Paise Mtr.

Ninety Three Only

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200- 250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling Rupees Four Thousand

390 6.00 compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- 4591.46 Five Hundred Ninety One Ea.

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to And Paise Forty Six Only

retainmoisture for long time Necessary test report must be submitted.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent (a)

For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200- 250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of

Rupees Five Thousand

applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling

391 3.00 5760.03 Seven Hundred Sixty And Ea.

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:-

Paise Three Only

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to

retainmoisture for long time Necessary test report must be submitted.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent

(b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200- 250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of

Rupees Eight Thousand

applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling

392 2.00 8636.51 Six Hundred Thirty Six Ea.

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:-

And Paise Fifty One Only

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to

retainmoisture for long time Necessary test report must be submitted.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent (c)

For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer

Providing Automation,

erecting required i.e independent Earthing in

HOT deep Galvanised normal

iron soil.earthing

strip for Length of

ACB/Back filling Compound

Transformer LT panel Rupees Seventy Seven

393 22.00 board, Motors etc. using proper clamp. 77.77 And Paise Seventy Seven Kg

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Rupees Seventy Seven

394 24.00 77.77 And Paise Seventy Seven Kg

Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder complete Rupees Forty Three And

erected with necessary connections. Paise Forty Three Only

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following Rupees Seven Thousand

396 1.00 specification (A) 0.5 H.P. single phase open well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 7934.56 Nine Hundred Thirty Four Ea.

32 mm dia. delivery pipe with control panel Cat. II FOR FOUNTAIN And Paise Fifty Six Only

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible Rupees Fifteen Thousand

397 2.00 motor having[C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 15707.52 Seven Hundred Seven And Ea.

33 mtr head suitable for 50/65 mm dia delivery pipe Cat.II (WORKING + STANDBY) Paise Fifty Two Only

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible Rupees Twenty Five

motor having [E] For 7.5 HP 3 phase open well horizontal mono block pump set suitable for 1550 LPM to 370 LPM @ 13.5 Thousand Nine Hundred

Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe Cat.II (WORKING+ STANDY) Eighty Seven And Paise

SITC of a robust, high-efficiency submersible pump designed for wastewater and stormwater management, ideal for

residential, commercial, and light industrial applications. It is rated at 3.0 HP (2.2 kW) and operates on a three-phase 220 V

Rupees Twenty Four

supply, within a voltage range of 160 V to 250 V, at a rated frequency of 50 Hz. The pump features a nominal speed of

399 2.00 24442.00 Thousand Four Hundred Job

RPM and is built with F-Class insulation, ensuring reliable thermal protection during continuous operation. It is capable of

handling liquid temperatures up to 30°C and passing solids up to 20 mm in size. Also includes all Accessories of Motor

S.I.T.C. submersible pump set for bore of 150 mm. dia. Or more having 3 phase motor capacity about 20 H.P and discharge Rupees Sixty Five

400 1.00 capacity having . Lifting and Lowering taken extra.(A) (20 Stage) 370 to 350 LPM discharge at head in between 168 to 177 65650.00 Thousand Six Hundred Ea.

mtrs. suitable for 50 mm dia. delivery pipe Cat.III Fifty Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made from16 G. CRCA sheet duly

painted with epoxy powder painted inside and outside with hinged doors and locking arrangement, consisting of suitable

size of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete unit), Rupees Twelve Thousand

Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load relay, Automatic Nine Hundred Ninety

water level controller, Ammeter & Voltmeter each with two way selector switch incoming wires duly socket Crimped, Panel Three And Paise Sixty Five

to be erected on angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay, thermal / Only

Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload relay & contactors of L& T, Siemens or

Cuttler Hamer make only. Panel to be erected on angle iron frame ground on wall. (A) S/D up to 7.5 H.P.

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)

main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing

single phasing preventer electronic overload protection, over voltage (Programmable) protection and under voltage Rupees Seven Thousand

402 1.00 (Programmable) protection, prod less dry run protection programming facility for setting of all parameter like overload 7250.79 Two Hundred Fifty And Ea.

current, high voltage limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault Paise Seventy Nine Only

like over load, high voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop

push buttons to be erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only) (A)

DOL up to 5.0 H.P.

Supplying and erecting approved make3 phase motor control panel (ATS) made from 16 G. CRCA sheet duly painted with

epoxy power paint inside and outside with hinged doors and locking arrangement, consisting, of suitable switch of AC

Rupees Thirty One

duty with HRC fuses (Cat.III), starting and running contactors, overload relay, Automatic water level controller, Electronic

Thousand Nine Hundred

403 1.00 timer with master timer CT operated Ammeter with selector switch, Voltmeter with selector switch, phase indicating lamps, 31965.49 Ea.

Sixty Five And Paise Forty

single phasing preventer , water level guard, over load, start, run and stop push buttons, air cooled auto transformer with

60%, 70%, 80% tapping, Panel to be erected on angle iron frame grouted on wall as directed., contactors relays, timer etc.

shall be of L & T Siemens / Cutler Hammer make. (A) Suitable for 25 H.P.

Providing and erecting Two way Centre off Four pole MCB Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box.

Rupees One Thousand

(b) for 40 Amp Cat.III

404 2.00 1344.31 Three Hundred Forty Four Ea.

And Paise Thirty One Only

Supplying & erecting approved make Automatic liquid level controller 6A.as per instruction of Engineer in charge on site

complete with wiring connection with existing wires , with copper conductor from pump to upper and lower tank.(Size Not Rupees Two Thousand

405 3.00 less than 1.5 Sq MM) from pump to upper and lower tank with ISI marked Rigid PVC Pipe. 2355.32 Three Hundred Fifty Five Ea

And Paise Thirty Two Only

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features: (A) GENERAL DESCRIPTION

OF LIFTS. [1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous

motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3] Car

with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights.

Car flooring shall be of s/s 304 chaker plate design sugeested of engineer in charge. of engineer in charge. Car doors shall be of stainless

steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail Ea.

language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening

made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should start

immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple cross / crossing light

beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift car showing over loading shall be provided such that doors

kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with

automatic sleep timer shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics

system for operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of calibration certificate submission, door key holes in the floor doors, fireman

switch shall be provided. [15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be

provided by the lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist way fascia

plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with

necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine

room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency.[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of

lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in lift agency’s

scope.)[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission from

Rupees Twenty One

lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car [20A] As per statutory Lakh(s) Fifty Five

406 1.00 requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade2. Push & talk 2155445.04 Thousand Four Hundred

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift Forty Five And Paise Four

inspection during/after lift erection and provide report by third party authorized by concern licensing authority 5.agency has to Only

provide third party insurance upto completion of free maintenance period and submit the document for the same. [21] Car Panel

Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin.[22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate height on

the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive

and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector) (B) SPECIAL FEATURES

DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control system dual 64 bit embedded microprocessor with CANBUS

Serial Communication mode including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening,

BMS/RMS with necessary online real time monitoring system having necessary connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call registration & brail mark with

arrival gong and hall lantern & TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to 2 hours and car door must

have multi-level crisscross beam door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room )

and Each elevator are equipped with remote monitoring system.agency has to provide mobile app and user id and password for

monitoring 15/16 Passengers, Ground plus 4 upper floor with Rated Speed of

m/sec. (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features: (A) GENERAL

DESCRIPTION OF LIFTS. [1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C.

Permanent Magnet Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC,

ACVVVF, vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with

overload and phase reversal relay and safety controls. [3] Car with M S platform with bracings of adequate size and to

sustain the impact load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of

grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of s/s

304 chaker plate design sugeested of engineer in charge. of engineer in charge. Car doors shall be of stainless steel grade Ea.

304, hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must

be with brail language as per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully automatic centre

opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside [5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided.

Also, Emergency Light & Fan should start immediately without any Time Delay as soon as power fails. [6] Digital scrolling

indicator system for up-down arrow along with floor position indicator shall be provided inside the car and at all floors. [7]

Full height infra red curtain with multiple cross / crossing light beams shall be provided. [8] Automatic Rescue Device

(ARD) shall be provided accordingly of passenger capacity with Manual Rescue Operation ( Manual Cranking Facility). [9]

Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is

removed. [10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with automatic sleep

timer shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics system

for operational and safety parameters shall be provided in control panel.[14] Mechanical over speed governor with

governor calibration as per actual site parameters and submission of calibration certificate submission, door key holes in

the floor doors, fireman switch shall be provided.[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for

the machine etc…[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if

directed by engineer in charge.[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be made

available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.[18]

Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be

made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in lift agency’s Rupees Fourteen Lakh(s)

scope.)[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary Seventy Four Thousand

407 1.00 permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car 1474779.78 Seven Hundred Seventy

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety Nine And Paise Seventy

barricade2. Push & talk communication system.3. Fireman's switch operation at Ground Floor. Eight Only

4.carrying out third party lift inspection during/after lift erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third party insurance upto completion of free maintenance period and

submit the document for the same. [21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto

Glow type clearly visible when view from inside cabin.[22] For Physically Handicapped person Full Length Handrails of

hairline finish steel grade of 304 should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car. [23]

With Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24]

Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED Department

(electrical Inspector) (B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control system

dual 64 bit embedded microprocessor with CANBUS Serial Communication mode including Regenerative power efficient

operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring

system having necessary connectivity for remote monitoring & other suitable supporting hardware & software devices to

fulfil the purpose. 2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern &

TFT Screen in the car with MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair

Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-

level crisscross beam door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room )

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

level crisscross beam door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room )

and Each elevator are equipped with remote monitoring system.agency has to provide mobile app and user id and

password for monitoring 8 / 10 Passengers, Ground plus 2 upper floor

with Rated Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), microprocessor based

Controller, top discharge type condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration

isolators, with suitable foundation, MS Stand for Unit with necessary paint etc. complete as required. The unit shall deliver

Rupees Twenty Two

the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be

Thousand Two Hundred

408 48.00 suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the 22233.13 Per HP

Thirty Three And Paise

refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

(Design should be got approval before execution from engineer in charge)

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped

with washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically

Rupees Nineteen

balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less

Thousand Four Hundred

409 6.00 remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, 19407.15 Ea.

Seven And Paise Fifteen

complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature.(D) 1.65 TR

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval

VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, Rupees Twenty Nine

outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation Thousand Six Hundred

on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. Twenty Six And Paise

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling Thirty Three Only

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System (F) 2.4 TR

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees Three Hundred

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

411 50.00 370.67 Seventy And Paise Sixty Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as required (B) 9.5 mm dia (OD) (Soft drawn) with

tube thickness 1.2 mm with 19 mm thick insulation

Item Description Estimated Rate

Item No. Rate in according to

but may be Rate in Words Unit

Figures estimated Qty.

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees Six Hundred Sixty

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

412 35.00 Four And Paise Fifty Eight Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as required (D) 15.86 mm dia (OD) (Soft drawn) with

tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees Seven Hundred

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

413 10.00 Eighty Three And Paise Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

Seventy Six Only

accessories as per specifications etc with necessary refrigerant joint as required (E) 19 mm dia (OD) (Hard drawn) with

tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees Nine Hundred

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

414 10.00 Sixty Two And Paise Fifty Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as required (F) 22.2 mm dia (OD) (Hard drawn) with

tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees One Thousand

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

415 20.00 Two Hundred Two And Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

Paise Ninety One Only

accessories as per specifications etc with necessary refrigerant joint as required (H) 28.58 mm dia (OD) (Hard drawn) with

tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger

Rupees One Thousand

supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell

416 10.00 1362.49 Three Hundred Sixty Two Mtr.

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

And Paise Forty Nine Only