Civil maintenance and Repair to VTS Tower, LH Tower, Technical Building, I.Q. , Power-House, Staff Quarter, Compound wall and Construction of Security Cabin at Okha VTS/LH Station.

Amount

PART - A (VTS Maintenance)

Painting with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours,safety belt, tools & plants and all other charges etc.complete.One or more coats on old work -Outerside wall

VTS Tower

Wall painting with premium acrylic emulsion paint (BergerAsian/brand) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour-Inside wall

Painting with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Door and Window

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture (Berger/Asian brand)on steel galvanised iron/ steel works Steel surface

VTS Railing

Circular glazing level + 44.9

Painting with synthetic enamel paint(Higlos luxol Berger brand/Asian) to Steel surface of VTS Tower

Painting with synthetic enamel paint of approved brand and manufacture (Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting on steel galvanised iron/ steel works Steel Surface

VTS Railing

Circular glazing level + 44.9

Painting with synthetic enamel paint to Steel surface of VTS Tower

Providing and fixing 8mm thick transparent polycarbonate sheet in circular glazing of VTS tower at 45.00mtr/57.00mtr level balcony including the cost of dismantling broken glass carefully, fixing, filling joints with silicon, cutting, welding, and all materials,labours, tools& plants, scaffolding lifting &shifting of hiegh rise tower, all other charges etc., complete.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Removing of glass from 45mtr and 57mtr level including all materials,labours, tools& plants, scaffolding lifting &shifting of hiegh rise tower, all other charges etc., complete.

Providing and fixing aluminium work for Circular glazing level of 45mt and 57mt on VTS Towerwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

8mm thich Tranparent polycarbonate Sheet

Providing and laying water proofing treatment on roof slab top of 60mt Height VTS tower by applying cement slurry mixed with water proofing cement compound consisting of applying: after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm,

Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

50mm thick in Grade M 25 with cement content not less than 330 kg per cum

75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Hand Railing Foundation(1:2:4) 60mtr Height VTS Tower

Mirror polishing on stone work at VTS Tower Stair, flooring etc. where ever required to give high gloss finish complete including the cost of all materials, labours, Tools & Plant and all other chagres etc. completed .

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Old wall - plaster surface

For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

100mm Brass Butt hinges(heavy duty)

Brass.Tower Bolt 150 x 10 mm(heavy duty)

Brass Tower Bolt 250 x 10 mm(heavy duty)

Brass Hooks &eye 150mm x6mm(heavy duty)

Rewedging,cramping joinery of doors&windows with new wedges in glue or white lead and repairing including Re hanging or refixing of shutters, hinges or pivotes etc completeSupply of all labour, tools & plants and mislanious materials like lead/fevical and wooden pin ,screws etc complete.(not exceeding 1Sq.m per leaf)

PART - B (LH Maintenance)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours,safety belt, scaffolding /Boosam chair/ Jhoola,ropes, tools & plants and all other charges etc.complete.One or more coats on old work -Outerside wall

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour-Inside wall

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Door and Window

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Railing of Compound Wall of LH

Foundation of Railing at Top of LH

Top of LH

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Railing of Compound Wall of LH

Foundation of Railing at Top of LH

Top of LH

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Old wall - plaster surface

For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Dismantling carefully the existing broken glass and providinfg and fixing panes 4mm of window shutters and replacing the same with thick (Modi / saint Gobin) new glass panes horizontal/tinted fixed with teak wooden beedings 15 mm x 15mm, nails, at all heights, as directed & as described as per condition at site including the cost of all materials,labours, tools& plants, and all other charges etc., complete.

4 mm thick glass pane (weight not less than 10kg/sqm).

Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

100mm Brass Butt hinges(heavy duty)

Al.Tower Bolt 150 x 10 mm(heavy duty)

Al.Tower Bolt 250 x 10 mm(heavy duty)

Al.Hooks &eye 150mm x6mm(heavy duty)

Rewedging,cramping joinery of doors&windows with new wedges in glue or white lead and repairing including Re hanging or refixing of shutters, hinges or pivotes etc completeSupply of all labour, tools & plants and mislanious materials like lead/fevical and wooden pin ,screws etc complete.(not exceeding 1Sq.m per leaf)

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge

Providing, Supplying and fixing of G.I.Pipe (40 mm dia "C" class) hand railing over Lighthouse Tower of 1.10 m heigh constituting of 40mm dia horizontal pipes in three rows as per standard drawing or as directed including necessary fixtures such as tees, crosses hand grouting in the concrete slab etc. including supply of all labours, materials, tools and plants etc. complete as directed by engineer in charge.

PART - C (General Maintenance)

Painting work for Outer Surface of Structure and Compound Wall(Acrylic External Paint/Water proof cement paint)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm over) on existing cement paint surface including the cost of all materials,labours, tools& plants, and all other charges etc., complete.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete. including the cost of all materials,labours, tools& plants, and all other charges etc., complete.

Providing & applying white cement based putty of average thickess 1mm ,of approved brand ( birla white/JK Cement) or any approved brand and manufuctures over the plastered wall surface to preper the surface even and good for smooth with applying putty over one coat primer of Inspection Quarter with approved brand after preparing the surface good for applying the primer as directed & as described as per condition at site including the cost of all materials, labours, tools & plants , scaffolding etc., complete.(Inspection Qtr and Technical Building

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Door and Window

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Paint to the MS main gate.

Street Light of Compound

Foundation of Street Light

O.H.Tank

Compound Wall Grill

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Paint to the MS main gate.

Street Light of Compound

Foundation of Street Light

O.H.Tank

Compound Wall Grill

Kerb Wall

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Old wall - plaster surface

For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Dismantling carefully the existing broken glass and providinfg and fixing panes 4mm of window shutters and replacing the same with thick (Modi / saint Gobin) new glass panes horizontal/tinted fixed with teak wooden beedings 15 mm x 15mm, nails, at all heights, as directed & as described as per condition at site including the cost of all materials,labours, tools& plants, and all other charges etc., complete.

4 mm thick glass pane (weight not less than 10kg/sqm).

Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

100mm Brass Butt hinges(heavy duty)

Al.Tower Bolt 150 x 10 mm(heavy duty)

Al.Tower Bolt 250 x 10 mm(heavy duty)

Al.Hooks &eye 150mm x6mm(heavy duty)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

Providing and fixing ISI marked door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Rewedging,cramping joinery of doors&windows with new wedges in glue or white lead and repairing including Re hanging or refixing of shutters, hinges or pivotes etc completeSupply of all labour, tools & plants and mislanious materials like lead/fevical and wooden pin ,screws etc complete.(not exceeding 1Sq.m per leaf)

Providing and fixing water supply fittings and specials of approved quality and brand of Metro, Waterman, Plumber, Parryware make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

15 mm dia C.P Brass bib cock

15mm dia CP brass stop cock

15mm dia CP brass Pillar cockfor wash basin

20mm GM wheel valve

15mm dia flexible connection for wash basin.

Cleaning the septic tank/Inspection chamber, sewer line,including taking out all sludge and liquids, washing with fresh water and diposing the same as per IS specification norms burried in the ground and as directed. Supply of all labour, tools &plants etc complete.

Septic tank

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing kitchen cabinet inside

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Providing and fixing water supply fittings and specials of approved quality and brand of Metro, Waterman, Plumber, Parryware make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

15mm thick CP pillar/Sink Cock

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

15mm jaquar Shower arm with nose

15mm Single lever Basin mixer &geyser

20mm Angle valve wash basin

15mm (APR-ESS-101053 Angular stop cock with wall flange &

15mmConcealed Stop Cock for water heater(APR-ESS-101069-ESS)

40mm Brass(DLX-551-Flush Cock with wall flange lever handle )

15mm dia flexible connector for wash bashin

Supplying & fixing mirror with frame

600 mm long towel rail

Providing and fixing PTMT soap Dish Holder

Paper holder

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Supplying & placing pvc water tank of approved make Syntex or equivalent 500 Ltr capacity at the roof of the building & making its connection with pipe line as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete

Earth work in excavation in trenches for foundations for all type of soils /soft rocks not exceding 1.50 m in width not exceding 10 sqm on plan including dressing of sides and ramming of bottems lift up to 1.50 m including getting out the excaveted soil and disposal of surplus excavated soil as directed with in a lead of 50 m in cluding the cost of all labours, tools & plants etc complete.

Providing and laying cement concrete 1:3:6(1 cement : 3coarse sand : 6 stone aggregate ) 150mm thick to laying base coarse of Road .including mixing,batching, placing and curing etc.,and as directed at site including the cost of all materials, labours, tools & plants , cost of curing etc., complete.

Providing and fixing at or near ground level precast cement concrete in kerb solid block including hosting and setting in position with cement mortar 1:3(1 Cement: 3 coarse sand) including cost of all materials, labours,tools and plants and all other charges etc.

Synthetic Enamal painting two coats to Kerb wall C C Road surface and newly plaster surface with (Higlos luxol Berger brand/Asian )of approved 1st quality and colour of synthetic enamel paint an even shade after removing old and wornt out paint by scrapping, cleaning and preparing the surface good including the cost of all materials, labours, tools & plants and all other charges etc. complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

60 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 25mm to 40 mm

Providing and fixing Heat Resistant Terrace Tiles /china mosaic (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

PART - D (Security Cabin)

Earth work in excavation by mechanical means (hydraulic excavator ) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as10 sqm on plan) inluding getting out and disposal of excavated earth lead upto 50m lift uotp1.5m, as directed by Enginner in charge.

All Kind of Soil/hard rock

Providing and laying Plain cement concrete in 1:3:6 (1Cement : 3 Course sand : 6 graded stone aggregate) 40 mm nominal size of approved quality of materials including mixing , laying, Scaffolding,Compacting and Curing etc., including the cost all materials, tools & plants, labours etc. complete.

providind and Laying cement concrete 1: 1½ :3(1 cement:1½course sand :3stone aggegate 20mmdown gauge) for R.C.C. Works as per drawing,curing including providing cover blocks in CM 1:2 of required thickness complete, supply of all materials, labour, tools and plants, mixing,laying in all levels and consolidation with required vibrator,cost of centering and shuttering ,scaffolding leaving holes and openind wherever required completed as directed and as per drawing excluding reinforcement including supply of all labour,material,tools & plants etc., complete.

For footing, columns and grade beams below ground level.

Columns above ground level

In Super Structure -Chajja,Cupboard slab,Lintel & Beam

Roof slab of 125 mm thickness

Providing and laying Reinfocement TMT steel of approved quality ( SAIL / VIZAK / TATA / TISCON ) including the cost of all materials, labours, tools & plants, cutting, bending binding , placing in position steel reinforcement as per drawing and as directed including cost of binding wire etc., complete.

Construction of C.C block masonry wall & pillar in superstructure of buildings upto floor 2 level in cement mortar of mix 1:5 (1 cement: 5 river sand) with approved size(380mmx230mmx200mm with CC1:3:6), as directed including cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc. complete.

18 mm thick Cement Plastering to CC Block masonry with cement mortar (1 : 4 ) ( 1 cement : 4 sand ) and rackingout joints as directed, including the cost of all materials, labours, tools & plants, scaffolding curing etc., complete.

15mm thick Cement Plastering to CC Block masonry with cement mortar (1 : 3) ( 1 cement : 3sand ) and rackingout joints as directed, including the cost of all materials, labours, tools & plants, scaffolding curing etc., complete.

Apex ultima two coats over a coat of primer of approved brand and manufacturer and of approved colour on new wall surfaces to give an even shade after throughly brushing the surface free from mortar droppings and other foregin matter,cleaning and also including preparing the surface even sand papered smooth including supply of all materials,tools & plants,labour and all other charges etc., complete.

Providing & applying white cement based putty of average thicness 1mm ,of approved brand ( birla white/JK Cement) or any approved brand and manufuctures over the plastered wall surface to preper the surface even and good for smooth with applying putty over one coat primer of Inspection Quarter with approved brand after preparing the surface good for applying the primer as directed & as described as per condition at site including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Applying two coats of Distempering on the inside painted wall surfaces with oil bound washable distemper of approved quality (Berger / Asian brand or equivalent of 1st quality) & colour , even shade with a coat of primer wherever required at all heights and as directed & as described as per condition at site after cleaning and preparing the surface good for distempering including the cost of all materials ,labour ,tools & plants , scaffolding etc., complete.

Filling the available Morrum inside the plinth & foundation and as directed in depth consolidating each deposited layers by ramming and watering, lead up to 50m and in all heights including the cost of labours, tools & plants and all other charges etc complete as directed.

Filling the available Sand inside the plinth & foundation and as directed in depth consolidating each deposited layers by ramming and watering, lead up to 50m and in all heights including the cost of labours, tools & plants and all other charges etc complete as directed.

Providing & laying 1st quality ceramic-vetrified floor/skirting tiles of size 600x600x10mm thickness for flooring of approved make like NITCO, Orient, Somany, Kajaria ,bell etc.Conforming to IS of apprved colours as white, ivory,grey, fume red brown laid on 20mm thick bed cement mortar( CM) 1:4 for foor tiles and 12mm thick bed of cement mortar( CM) 1:3 ( 1 cement : 3 coarse sand) for dado tiles, Including jointing with white cement mixed with pigment of of matching shade complete.

Providing & laying prepolished granite stone on the old flooring 20mm(ovg) thick of approved quality & colour laid over a bed of CM 1:3 (1 cement: 3 River sand) of thickness 20mm(avg) pointing with white cement slurry after removal of existing floring including the cost of Replastering in CM 1:3, rubbing, polishing, washing, cutting, laying, fixing, leveling, maintaining gradient jointing, after removing the old flooring & preparing the surface fof providing granient jointing, after removing the old flooring & preparing the surface for providing granite stone etc. as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels, as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing window having extruded alluminium colour power coated section frame main outer size 63.50X38.10X1.95 mm (jindal Section No.4605 @ wt 1.094 kg/Rmt) horizontal Two Track member size 61.85mm X31.75mm X1.20mm (of Jindal section No. 8758 @ Wt. 0.659 Kg/ mt) with sliding shutters of Horizontal member size 40mm X18mm X1.29 mm(of Jindal section No.8949 @wt. of 0.456 kg./mt) vertical member of size 40mm X18mm X1.29 mm( of Jindal section No. 8947 @wt.of 0.456 kg/mt,/ section 8948 @Wt.bronze colour tinted float glass with powder coated alluminium fitting and fixtures and transparent silicon sealant glass fixing to frames as per detail etc.

Fram main member (63.50x38.10x1.95mm)

Shutter (40mmx18mmx1.29mm)

float glass panes 5.50mmthicness

Providing 16mm dia Mild steel rods/Grill to the window frame as directed including cutting the bars to suitable length, straighting, drilling holes in the wooden frame and fixing the rods in line and level(100mmC/C) etc complete including cost of all matierials, labour, tools and plants etc complete as directed.

S.E. Painting with two coats to MS grill for all heights with approved paints of first quality and colour after removing worm out cement by scapping and applying one coat of zinc chromate as directed at site, including the cost of all materials, labours, tools & plants, necessary safty belt etc complete

Consilied Wiring for light point /fan point with finolex make 1.5sq.mm FRLS PVC insulated copper conductor single core in surface / recessed medium class preceision make PVC conduct , with modular switch , modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLS PVC insulated copper conductor single core cable,fan, light fittings, wiring work etc as require.

meghji ramji maheshwari

Maruti Abhiyantriki