Providing workstation and table arrangements for engineers in CCR building under RSPS2 project at TNPL Unit I

SUPPLYING OF (FULL PARTITION- MODULAR) 70MM THICK USING EXTRUDED ALUMINIUM PROFILES FOR TOP TRIM, RACE WAYS ETC., 50 MICRON POWDER COATED FINISH NOT SUSCEPTIBLE TO CORROSION AND ANTIRUST OF APPROVED COLOUR. THE PANEL SHALL BE DIVIDEC INTO FOUR EQUAL PARTS. THE PANEL (BOTTOM & TOP) SHALL BE COVERED WITH PRE LAMINATED PARTICLE BOARD ON BOTH SIDES TO A HEIGHT OF 900MM TO MATCH WITH THE WORK STATION PARTITON. THE MIDDLE PANEL SHALL BE COVERED WITH 5MM THICK PLAIN GLASS ON BOTH SIDES. ABOVE FALSE CEILING LEVEL THE FRAME WORK SHALL BE EXTENDED AND RIGIDLY FIXED WITH THE RCC ROOF, THE PANEL SHALL BE OPEN ABOVE FALSE CEILING LEVEL.

SUPPLY OF 70MM THICK MODULAR PARTITION (1200MMHT.) USING EXTRUDED ALUMINIUM PROFILES FOR TOP TRIM, RACE WAYS ETC., 50 MICRON POWDER COATED FINISH, MADE OUT OF PANELS COVERED WITH 6MM THICK MDF ON BOTH SIDES, EITHER FABRIC/ LAMINATE/ MARKER BOARD FINISH WITH TWO DESIGNATED RACEWAYS IN LINEAR DIRECTION FOR UPS CABLING AND DATA & VOICE CABLING SEPARATELY, ALL PANELS JOINTED WITH SLOTTED CRCA"C" CHANNELS FOR HOLDING CRCA BRACKETS FOR FIXING WORKTOP ETC., SUPPLY OF TABLE OF SIZE 1500X1500X600 TOP MADE OF 25MM THICK PRELAM PARTICLE BOARD AS PER DWG WITH PVC EDGE BANDING AND SHALL BE SUPPORTED WITH THE PARTITIONS BY METALLIC BRACKETS WITH CUT OUTS PROVIDED WITH PLASTIC GROMMETS TO PASS WIRES ETC., COMPLETE. SUPPLY OF GABLE ENDS MADE OF 18MM THICK PRELAM BOARD WITH PVC EDGE BAND FINISH, 6MM HEIGHT ADJUSTABLE LEVELLORS, SUPPORTED WITH METALLIC BRACKETS TO SUPPORT. SUPPLY OF PULLOUT ABS KEYBOARD TRAY MOUNTED UNDER THE TABLE TOP USING DOUBLE EXTENSTION TELESCOPIC RUNNERS. METAL CPU TROLLY, SUPPLY OF MOBILE PEDESTALS 3 DRAWER TYPE PRELAM PEDESTAL USING 18MM THICK PRE LAMINATED PARTICLE BOARD, WITH PVC EDGE BANDED FINISH FOR TOPS, SIDES & FACIA, 9MM THICK PRELAM FOR BACK BOARD AND DRAWER REST, WITH PROVISION OF FILES IN THE BOTTOM DRAWER, ARRANGEMENTS FOR CENTRAL LOCKING FACILITY TO SECURE ALL DRAWERS TOGETHAR WITH EBCO MAKE METABOX GLIDES ETC., COMPLETE INCLUDING HANDLES WITH 4 NOS TWIN WHEEL CASTORS.

SUPPLY OF OFFICERS TABLE OF SIZE 1500 X 750 X 750 MM HT WITH SIDE UNIT 900 X 400 X 725 MM HT USING 25MM THICK POSTFORMED TABLE TOP ALL VERTICALS AND MODESTY 18MM THICK PRELAMINATED PARTICLE BOARD EDGES WITH PVC EDGE BANDED FINISH INCLUDING ONE KEYBOARD TRAY, CPU TROLLEY, DRAWER UNIT, ALL INCLUSIVE ETC., COMPLETE.

NETTED MEDIUM BACK CHAIR

SUPPLY OF STORAGE UNIT OF SIZE 1500 X 450 X 1200MM AS PER SKETCH. MADE OUT OF PRE LAMINATED PARTICLE BOARD OF APPROVED COLOUR WITH OPENABLE SHUTTERS, NECESSARY LOCKING ARRANGEMENTS AND HANDLES ETC COMPLETE.