DEPOSIT-Renovation of Thekkekurodu check dam at Kannambra Gramapanchayath- Providing new MS shutter- hoisting platform and hoisting mechanism at Thekkekurodu check dam- Kannambra Gramapanchayath- General Mechanical Work

Amount

Casting extension piers

OD38667/2024-2025:Providing BUND - 1m bottom width and 0.5 m height using empty gunny bar polythene bag filled with earth for an total length of 1 m including labour. Vol. of bund 1*0.5*1=0.5m3 No. of bags 0.5/0.027 =19nos

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD38671/2024-2025:DRILLING (up to depth of 150mm for TMT rod dia. to 25mm) and FASTENING with TMT rod in concrete/Stone including conveyance and labor charges complete. [excluding cost of materials already supplied.]

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing new MS shutter, hoisting mechanism, hoisting platform and handrails..

OD38906/2024-2025:Dismantling of the Canal Shutter ( Up to 2 Tonne weight )/ Hoisting unit, Embedded parts, etc. of the same and stacking at a distance of 100 metre including hire of machinery, labour etc. complete as directed by the departmental officer at site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

OD38601/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges.

OD38596/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

85.103:Supply of MS checquered plates including cost of conveyance charges

OD38597/2024-2025:Supply of MS round bar including cost of conveyance charges.

OD38598/2024-2025:SUPPLYING & STACKING of Dia 32 mm G.I. PIPE.

OD38599/2024-2025:SUPPLYING and FIXING of TOWER BOLT.

OD38592/2024-2025:SUPPLY of BUTT HINGE.

OD38602/2024-2025:SUPPLY and STACKING of PAD LOCK

OD38604/2024-2025:Supply of bolt and nut up to 300 mm length including cost of conveyance.

OD38768/2024-2025:Providing of Double worm and pinion having a lifting speed of around 5.00 cm/min for hand operation/ manual operation including cost of all materials, labour, hire charges and conveyance.

OD38605/2024-2025:Providing EN-8 (Dia 63 mm) screw rod 7.50 tonne capacity 4.00 m lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance (CANAL GATE 14-16)

OD38606/2024-2025:THREAD LESS portion of the screw rod Dia 67mm (per metre rate).

OD38591/2024-2025:Fabrication and erection of Embedded parts of Canal shutters ( upto 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 1-16)

OD38593/2024-2025:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for plaining, welding, shearing, grinding etc, lead and lift, conveyance, incidental and handling etc complete-(CANL GATE 5-16)

OD38594/2024-2025:Fabrication and supply of Structural steel canal shutters ( upto 2 tonne weight )/hoisting bridge /platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 2-16)

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD38595/2024-2025:Painting all the exposed surfaces of the Hoisting bridge and its hand rails etc with two coats of EPOXY PAINT over two coats of epoxy primer after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges, cost of testing all paintingmaterials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site.

OD38603/2024-2025:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE.

OD38600/2024-2025:Erection of the canal shutter ( up to 2 tonne weight) /hoisting bridge / platform including handrails , ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied-(CANAL GATE 3-16)

MANAF V (BID ID -2451462)

MOHAMMED MUSTHAFA V (BID ID -2451466)

Bidder Name

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

MANAF V